- 27 Jan, 2017 32 commits
-
-
Christoph Hellwig authored
Currently blk-mq always allocates the sense buffer using normal GFP_KERNEL allocation. Refactor the cmd pool code to split the cmd and sense allocation and share the code to allocate the sense buffers as well as the sense buffer slab caches between the legacy and blk-mq path. Note that this switches to lazy allocation of the sense slab caches - the slab caches (not the actual allocations) won't be destroy until the scsi module is unloaded instead of keeping track of hosts using them. Signed-off-by:
Christoph Hellwig <hch@lst.de> Reviewed-by:
Hannes Reinecke <hare@suse.com> Acked-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
Jens Axboe <axboe@fb.com>
-
Christoph Hellwig authored
When using the slab allocator we already decide at cache creation time if an allocation comes from a GFP_DMA pool using the SLAB_CACHE_DMA flag, and there is no point passing the kmalloc-family only GFP_DMA flag to kmem_cache_alloc. Drop all the infrastructure for doing so. Signed-off-by:
Johannes Thumshirn <jthumshirn@suse.de> Acked-by:
-
Hannes Reinecke authored
Switch to scsi_execute_req_flags() instead of using the block interface directly. This will set REQ_QUIET and REQ_PREEMPT, but this is okay as we're evaluating the errors anyway and should be able to send the command even if the device is quiesced. Signed-off-by:
-
Hannes Reinecke authored
Switch to scsi_execute_req_flags() and scsi_get_vpd_page() instead of open-coding it. Using scsi_execute_req_flags() will set REQ_QUIET and REQ_PREEMPT, but this is okay as we're evaluating the errors anyway and should be able to send the command even if the device is quiesced. Signed-off-by:
-
Hannes Reinecke authored
Switch to scsi_execute_req_flags() and scsi_get_vpd_page() instead of open-coding it. Using scsi_execute_req_flags() will set REQ_QUIET and REQ_PREEMPT, but this is okay as we're evaluating the errors anyway and should be able to send the command even if the device is quiesced. Signed-off-by:
-
Christoph Hellwig authored
DM already calls blk_mq_alloc_request on the request_queue of the underlying device if it is a blk-mq device. But now that we allow drivers to allocate additional data and initialize it ahead of time we need to do the same for all drivers. Doing so and using the new cmd_size infrastructure in the block layer greatly simplifies the dm-rq and mpath code, and should also make arbitrary combinations of SQ and MQ devices with SQ or MQ device mapper tables easily possible as a further step. Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Signed-off-by:
-
Christoph Hellwig authored
DM tries to copy a few fields around for BLOCK_PC requests, but given that no dm-target ever wires up scsi_cmd_ioctl BLOCK_PC can't actually be sent to dm. Signed-off-by:
-
Christoph Hellwig authored
A couple tweaks to the tracing code: - trace the request size for all requests - trace request sector and nr_sectors only for fs requests, enforced by helpers - drop SCSI CDB tracing - we have SCSI tracing for this and are going to me the CDB out of the generic struct request soon. With this the tracing code stops to know about BLOCK_PC requests entirely, it's just FS vs passthrough requests now, where the latter includes any driver-private requests. Signed-off-by:
-
Christoph Hellwig authored
This mirrors the blk-mq capabilities to allocate extra drivers-specific data behind struct request by setting a cmd_size field, as well as having a constructor / destructor for it. Signed-off-by:
-
Christoph Hellwig authored
Return an errno value instead of the passed in queue so that the callers don't have to keep track of two queues, and move the assignment of the request_fn and lock to the caller as passing them as argument doesn't simplify anything. While we're at it also remove two pointless NULL assignments, given that the request structure is zeroed on allocation. Signed-off-by:
Bart Van Assche <bart.vanassche@sandisk.com> Reviewed-by:
-
Christoph Hellwig authored
We can't initalize the elevator fields for flushes as flush share space in struct request with the elevator data. But currently we can't communicate that a request is a flush through blk_get_request as we can only pass READ or WRITE, and the low-level code looks at the possible NULL bio to check for a flush. Fix this by allowing to pass any block op and flags, and by checking for the flush flags in __get_request. Signed-off-by:
-
Christoph Hellwig authored
No need for the local variables, the bio is still live and we can just assign the bits we want directly. Make me wonder why we can't assign all the bio flags to start with. Signed-off-by:
-
Jens Axboe authored
Signed-off-by: -
Omar Sandoval authored
This fixes a couple of problems: 1. In the !CONFIG_DEBUG_FS case, the stub definitions were bogus. 2. In the !CONFIG_BLOCK case, blk-mq-debugfs.c shouldn't be compiled at all. Fix the stub definitions and add a CONFIG_BLK_DEBUG_FS Kconfig option. Fixes: 07e4fead ("blk-mq: create debugfs directory tree") Signed-off-by:
Omar Sandoval <osandov@fb.com> Augment Kconfig description. Signed-off-by:
-
Jens Axboe authored
Use op_is_flush() where applicable. Signed-off-by: -
Jens Axboe authored
Instead of letting the caller check this and handle the details of inserting a flush request, put the logic in the scheduler insertion function. This fixes direct flush insertion outside of the usual make_request_fn calls, like from dm via blk_insert_cloned_request(). Signed-off-by: -
Christoph Hellwig authored
This centralizes the checks for bios that needs to be go into the flush state machine. Signed-off-by:
-
Jens Axboe authored
When we invoke dispatch_requests(), the scheduler empties everything into the passed in list. This isn't always a good thing, since it means that we remove items that we could have potentially merged with. Change the function to dispatch single requests at the time. If we do that, we can backoff exactly at the point where the device can't consume more IO, and leave the rest with the scheduler for better merging and future dispatch decision making. Signed-off-by:
-
Jens Axboe authored
If we have both multiple hardware queues and shared tag map between devices, we need to ensure that we propagate the hardware queue restart bit higher up. This is because we can get into a situation where we don't have any IO pending on a hardware queue, yet we fail getting a tag to start new IO. If that happens, it's not enough to mark the hardware queue as needing a restart, we need to bubble that up to the higher level queue as well. Signed-off-by:
-
Jens Axboe authored
We don't want to hold on to this resource when we have a scheduler attached. Signed-off-by:
-
Jens Axboe authored
Once we mark the queue as needing a restart, re-check if we can get a driver tag. This fixes a theoretical issue where the needed IO completes _after_ blk_mq_get_driver_tag() fails, but before we manage to set the restart bit. Signed-off-by:
-
Jens Axboe authored
We'll use the same criteria for whether we need to run the queue sync or async when we have a scheduler, as we do without one. Signed-off-by:
-
Omar Sandoval authored
These counters aren't as out-of-place in sysfs as the other stuff, but debugfs is a slightly better home for them. Reviewed-by:
-
Omar Sandoval authored
These statistics _might_ be useful to userspace, but it's better not to commit to an ABI for these yet. Also, the dispatched file in sysfs couldn't be cleared, so make it clearable like the others in debugfs. Reviewed-by:
-
Omar Sandoval authored
These can be used to debug issues like tag leaks and stuck requests. Reviewed-by:
-
Omar Sandoval authored
These are very tied to the blk-mq tag implementation, so exposing them to sysfs isn't a great idea. Move the debugging information to debugfs and add basic entries for the number of tags and the number of reserved tags to sysfs. Reviewed-by:
-
Omar Sandoval authored
This is useful for debugging problems where we've gotten stuck with requests in the software queues. Reviewed-by:
-
Omar Sandoval authored
This is useful debugging information that will be used in the blk-mq debugfs directory. Reviewed-by:
-
Omar Sandoval authored
The request pointers by themselves aren't super useful. Reviewed-by:
-
Omar Sandoval authored
These lists are only useful for debugging; they definitely don't belong in sysfs. Putting them in debugfs also removes the limitation of a single page of output. Reviewed-by:
-
Omar Sandoval authored
hctx->state could come in handy for bugs where the hardware queue gets stuck in the stopped state, and hctx->flags is just useful to know. Signed-off-by:
-
Omar Sandoval authored
In preparation for putting blk-mq debugging information in debugfs, create a directory tree mirroring the one in sysfs: # tree -d /sys/kernel/debug/block /sys/kernel/debug/block |-- nvme0n1 | `-- mq | |-- 0 | | `-- cpu0 | |-- 1 | | `-- cpu1 | |-- 2 | | `-- cpu2 | `-- 3 | `-- cpu3 `-- vda `-- mq `-- 0 |-- cpu0 |-- cpu1 |-- cpu2 `-- cpu3 Also add the scaffolding for the actual files that will go in here, either under the hardware queue or software queue directories. Reviewed-by:
-
- 26 Jan, 2017 2 commits
-
-
Jens Axboe authored
We don't trigger this from the normal IO path, since we always use blocking allocations from there. But Bart saw it testing multipath dm, since that is a heavy user of atomic request allocations in the map and clone path. Reported-by:
-
Jens Axboe authored
If we come in from blk_mq_alloc_requst() with NOWAIT set in flags, we must ensure that we don't later overwrite that in blk_mq_sched_get_request(). Initialize alloc_data->flags before passing it in. Reported-by:
-
- 25 Jan, 2017 1 commit
-
-
Jens Axboe authored
If we have a scheduler attached, we have two sets of tags. We don't want to apply our active queue throttling for the scheduler side of tags, that only applies to driver tags since that's the resource we need to dispatch an IO. Signed-off-by:
-
- 23 Jan, 2017 3 commits
-
-
Markus Elfring authored
The script "checkpatch.pl" pointed information out like the following. ERROR: do not use assignment in if condition Thus fix the affected source code place. Signed-off-by:
Markus Elfring <elfring@users.sourceforge.net> Signed-off-by:
-
Markus Elfring authored
The script "checkpatch.pl" pointed information out like the following. ERROR: do not use assignment in if condition Thus fix the affected source code places. Signed-off-by:
-
Alexander Potapenko authored
KMSAN (KernelMemorySanitizer, a new error detection tool) reports use of uninitialized memory in cfq_init_cfqq(): ================================================================== BUG: KMSAN: use of unitialized memory ... Call Trace: [< inline >] __dump_stack lib/dump_stack.c:15 [<ffffffff8202ac97>] dump_stack+0x157/0x1d0 lib/dump_stack.c:51 [<ffffffff813e9b65>] kmsan_report+0x205/0x360 ??:? [<ffffffff813eabbb>] __msan_warning+0x5b/0xb0 ??:? [< inline >] cfq_init_cfqq block/cfq-iosched.c:3754 [<ffffffff8201e110>] cfq_get_queue+0xc80/0x14d0 block/cfq-iosched.c:3857 ... origin: [<ffffffff8103ab37>] save_stack_trace+0x27/0x50 arch/x86/kernel/stacktrace.c:67 [<ffffffff813e836b>] kmsan_internal_poison_shadow+0xab/0x150 ??:? [<ffffffff813e88ab>] kmsan_poison_slab+0xbb/0x120 ??:? [< inline >] allocate_slab mm/slub.c:1627 [<ffffffff813e533f>] new_slab+0x3af/0x4b0 mm/slub.c:1641 [< inline >] new_slab_objects mm/slub.c:2407 [<ffffffff813e0ef3>] ___slab_alloc+0x323/0x4a0 mm/slub.c:2564 [< inline >] __slab_alloc mm/slub.c:2606 [< inline >] slab_alloc_node mm/slub.c:2669 [<ffffffff813dfb42>] kmem_cache_alloc_node+0x1d2/0x1f0 mm/slub.c:2746 [<ffffffff8201d90d>] cfq_get_queue+0x47d/0x14d0 block/cfq-iosched.c:3850 ... ================================================================== (the line numbers are relative to 4.8-rc6, but the bug persists upstream) The uninitialized struct cfq_queue is created by kmem_cache_alloc_node() and then passed to cfq_init_cfqq(), which accesses cfqq->ioprio_class before it's initialized. Signed-off-by:
Alexander Potapenko <glider@google.com> Signed-off-by:
-
- 22 Jan, 2017 2 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fix from Thomas Gleixner: "Restore the retrigger callbacks in the IO APIC irq chips. That addresses a long standing regression which got introduced with the rewrite of the x86 irq subsystem two years ago and went unnoticed so far" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/ioapic: Restore IO-APIC irq_chip retrigger callback
-
