- 08 Dec, 2006 40 commits
-
-
Akinobu Mita authored
Use bitrev8 for ambassador driver. Cc: Chas Williams <linux-atm-general@lists.sourceforge.net> Cc: Giuliano Procida at Madge Networks <gprocida@madge.com> Signed-off-by:
Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Akinobu Mita authored
Use bitrev8 for hisax_st5481 driver. Acked-by:
Karsten Keil <kkeil@suse.de> Cc: Kai Germaschewski <kai.germaschewski@gmx.de> Cc: Frode Isaksen <fisaksen@bewan.com> Signed-off-by:
-
Akinobu Mita authored
Use bitrev8 for nvidiafb, rivafb, and tgafb drivers Cc: Antonino Daplas <adaplas@pol.net> Signed-off-by:
-
Akinobu Mita authored
This patch replaces bitreverse() by bitrev32. The only users of bitreverse() are crc32 itself and via-velocity. Cc: Jeff Garzik <jgarzik@pobox.com> Cc: Matt Domsch <Matt_Domsch@dell.com> Signed-off-by:
-
Akinobu Mita authored
This patch provides two bit reverse functions and bit reverse table. - reverse the order of bits in a u32 value u8 bitrev8(u8 x); - reverse the order of bits in a u32 value u32 bitrev32(u32 x); - byte reverse table const u8 byte_rev_table[256]; Signed-off-by:
-
Jeremy Fitzhardinge authored
A warning is a warning, not a BUG. Signed-off-by:
Jeremy Fitzhardinge <jeremy@goop.org> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by:
-
Judith Lebzelter authored
Switch ppc over to using the generic BUG implementation. Signed-off-by:
Judith Lebzelter <judith@osdl.org> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Michael Ellerman <michael@ellerman.id.au> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
-
Jeff Dike authored
The BUG changes in -mm3 need some arch support. This patch adds the UML support needed. For the most part, it was stolen from the underlying architecture. The exception is the kernel eip < PAGE_OFFSET test, which is wrong for skas mode UMLs. Signed-off-by:
Jeff Dike <jdike@addtoit.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Signed-off-by:
-
Jeremy Fitzhardinge authored
This makes x86-64 use the generic BUG machinery. The main advantage in using the generic BUG machinery for x86-64 is that the inlined overhead of BUG is just the ud2a instruction; the file+line information are no longer inlined into the instruction stream. This reduces cache pollution. Signed-off-by:
-
Jeremy Fitzhardinge authored
This makes i386 use the generic BUG machinery. There are no functional changes from the old i386 implementation. The main advantage in using the generic BUG machinery for i386 is that the inlined overhead of BUG is just the ud2a instruction; the file+line(+function) information are no longer inlined into the instruction stream. This reduces cache pollution, and makes disassembly work properly. Signed-off-by:
-
Jeremy Fitzhardinge authored
This patch adds common handling for kernel BUGs, for use by architectures as they wish. The code is derived from arch/powerpc. The advantages of having common BUG handling are: - consistent BUG reporting across architectures - shared implementation of out-of-line file/line data - implement CONFIG_DEBUG_BUGVERBOSE consistently This means that in inline impact of BUG is just the illegal instruction itself, which is an improvement for i386 and x86-64. A BUG is represented in the instruction stream as an illegal instruction, which has file/line information associated with it. This extra information is stored in the __bug_table section in the ELF file. When the kernel gets an illegal instruction, it first confirms it might possibly be from a BUG (ie, in kernel mode, the right illegal instruction). It then calls report_bug(). This searches __bug_table for a matching instruction pointer, and if found, prints the corresponding file/line information. If report_bug() determines that it wasn't a BUG which caused the trap, it returns BUG_TRAP_TYPE_NONE. Some architectures (powerpc) implement WARN using the same mechanism; if the illegal instruction was the result of a WARN, then report_bug(Q) returns CONFIG_DEBUG_BUGVERBOSE; otherwise it returns BUG_TRAP_TYPE_BUG. lib/bug.c keeps a list of loaded modules which can be searched for __bug_table entries. The architecture must call module_bug_finalize()/module_bug_cleanup() from its corresponding module_finalize/cleanup functions. Unsetting CONFIG_DEBUG_BUGVERBOSE will reduce the kernel size by some amount. At the very least, filename and line information will not be recorded for each but, but architectures may decide to store no extra information per BUG at all. Unfortunately, gcc doesn't have a general way to mark an asm() as noreturn, so architectures will generally have to include an infinite loop (or similar) in the BUG code, so that gcc knows execution won't continue beyond that point. gcc does have a __builtin_trap() operator which may be useful to achieve the same effect, unfortunately it cannot be used to actually implement the BUG itself, because there's no way to get the instruction's address for use in generating the __bug_table entry. [randy.dunlap@oracle.com: Handle BUG=n, GENERIC_BUG=n to prevent build errors] [bunk@stusta.de: include/linux/bug.h must always #include <linux/module.h] Signed-off-by:
Adrian Bunk <bunk@stusta.de> Signed-off-by:
-
Peter Zijlstra authored
Don't leak a ->bd_part_count when the partition open fails with -ENXIO. Signed-off-by:
Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by:
Neil Brown <neilb@suse.de> Signed-off-by:
-
NeilBrown authored
md_open takes ->reconfig_mutex which causes lockdep to complain. This (normally) doesn't have deadlock potential as the possible conflict is with a reconfig_mutex in a different device. I say "normally" because if a loop were created in the array->member hierarchy a deadlock could happen. However that causes bigger problems than a deadlock and should be fixed independently. So we flag the lock in md_open as a nested lock. This requires defining mutex_lock_interruptible_nested. Cc: Ingo Molnar <mingo@elte.hu> Acked-by:
Ingo Molnar <mingo@elte.hu> Signed-off-by:
-
NeilBrown authored
Now that the nesting in blkdev_{get,put} is simpler, adding mutex_lock_nested is trivial. Cc: Ingo Molnar <mingo@elte.hu> Acked-by: -
NeilBrown authored
When we open (actually blkdev_get) a partition we need to also open (get) the whole device that holds the partition. The involves some limited recursion. This patch tries to simplify some aspects of this. As well as opening the whole device, we need to increment ->bd_part_count when a partition is opened (this is used by rescan_partitions to avoid a rescan if any partition is active, as that would be confusing). The main change this patch makes is to move the inc/dec of bd_part_count into blkdev_{get,put} for the whole rather than doing it in blkdev_{get,put} for the partition. More specifically, we introduce __blkdev_get and __blkdev_put which do exactly what blkdev_{get,put} did, only with an extra "for_part" argument (blkget_{get,put} then call the __ version with a '0' for the extra argument). If for_part is 1, then the blkdev is being get(put) because a partition is being opened(closed) for the first(last) time, and so bd_part_count should be updated (on success). The particular advantage of pushing this function down is that the bd_mutex lock (which is needed to update bd_part_count) is already held at the lower level. Note that this slightly changes the semantics of bd_part_count. Instead of updating it whenever a partition is opened or released, it is now only updated on the first open or last release. This is an adequate semantic as it is only ever tested for "== 0". Having introduced these functions we remove the current bd_part_count updates from do_open (which is really the body of blkdev_get) and call __blkdev_get(... 1). Similarly in blkget_put we remove the old bd_part_count updates and call __blkget_put(..., 1). This call is moved to the end of __blkdev_put to avoid nested locks of bd_mutex. Finally the mutex_lock on whole->bd_mutex in do_open can be removed. It was only really needed to protect bd_part_count, and that is now managed (and protected) within the recursive call. The observation that bd_part_count is central to the locking issues, and the modifications to create __blkdev_put are from Peter Zijlstra. Cc: Ingo Molnar <mingo@elte.hu> Acked-by: -
NeilBrown authored
The extra call to get_gendisk is not good. It causes a ->probe and possible module load before it is really appropriate to do this. Cc: Ingo Molnar <mingo@elte.hu> Acked-by:
-
Peter Zijlstra authored
Use the gendisk partition number to set a lock class. Signed-off-by:
Arjan van de Ven <arjan@linux.intel.com> Cc: Jason Baron <jbaron@redhat.com> Signed-off-by:
-
Peter Zijlstra authored
Remove the old complex and crufty bd_mutex annotation. Signed-off-by:
-
Thomas Maier authored
Add a sysfs and debugfs interface to the pktcdvd driver. Look into the Documentation/ABI/testing/* files in the patch for more info. Signed-off-by:
Thomas Maier <balagi@justmail.de> Signed-off-by:
Peter Osterlund <petero2@telia.com> Signed-off-by:
-
Thomas Maier authored
This adds a bio write queue congestion control to the pktcdvd driver with fixed on/off marks. It prevents that the driver consumes a unlimited amount of write requests. [akpm@osdl.org: sync with congestion_wait() renaming] Signed-off-by:
-
Thomas Maier authored
pktcdvd: Update Kconfig help text. Signed-off-by:
-
Thomas Maier authored
This patch makes some of the procfs functions reusable (for coming sysfs patch e.g.): pkt_setup_dev() pkt_remove_dev() ... Signed-off-by:
-
Oleg Nesterov authored
sys_unshare(CLONE_SIGHAND) is broken, the code under 'if (new_sigh)' is never executed but very wrong. Just remove it to avoid a confusion, task_lock() has nothing to do with ->sighand changing. Also, change the comment in unshare_sighand(). Yes, CLONE_THREAD implies CLONE_SIGHAND, but still it looks confusing. Also, we don't need to check current->sighand != NULL. Signed-off-by:
Oleg Nesterov <oleg@tv-sign.ru> Acked-by:
-
Oleg Nesterov authored
Make set_special_pids() static, the only caller is daemonize(). Signed-off-by:
-
Oleg Nesterov authored
No need to take the global tty_mutex, signal->tty->driver can't go away while we are holding ->siglock. Signed-off-by:
-
Oleg Nesterov authored
->signal->tty is protected by ->siglock, no need to take the global tty_mutex. Signed-off-by:
-
Peter Zijlstra authored
Fix the locking of signal->tty. Use ->sighand->siglock to protect ->signal->tty; this lock is already used by most other members of ->signal/->sighand. And unless we are 'current' or the tasklist_lock is held we need ->siglock to access ->signal anyway. (NOTE: sys_unshare() is broken wrt ->sighand locking rules) Note that tty_mutex is held over tty destruction, so while holding tty_mutex any tty pointer remains valid. Otherwise the lifetime of ttys are governed by their open file handles. This leaves some holes for tty access from signal->tty (or any other non file related tty access). It solves the tty SLAB scribbles we were seeing. (NOTE: the change from group_send_sig_info to __group_send_sig_info needs to be examined by someone familiar with the security framework, I think it is safe given the SEND_SIG_PRIV from other __group_send_sig_info invocations) [schwidefsky@de.ibm.com: 3270 fix] [akpm@osdl.org: various post-viro fixes] Signed-off-by:Alan Cox <alan@redhat.com> Cc: Oleg Nesterov <oleg@tv-sign.ru> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Chris Wright <chrisw@sous-sol.org> Cc: Roland McGrath <roland@redhat.com> Cc: Stephen Smalley <sds@tycho.nsa.gov> Cc: James Morris <jmorris@namei.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jeff Dike <jdike@addtoit.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Jan Kara <jack@ucw.cz> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
-
john stultz authored
This patch re-adds the verify_pmtmr_rate functionality from 2.6.17 that I dropped 2.6.18. This resolves problems seen on older K6 ASUS boards where the ACPI PM timer runs too fast. See: https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=211902 http://bugme.osdl.org/show_bug.cgi?id=2375 Thanks to Ian Campbell for re-reporting this and testing the fix! Signed-off-by:
John Stultz <johnstul@us.ibm.com> Cc: Andi Kleen <ak@suse.de> Cc: Ian Campbell <ijc@hellion.org.uk> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Roman Zippel <zippel@linux-m68k.org> Signed-off-by:
-
Herbert Poetzl authored
utsname information is shown in the linux banner, which also is used for /proc/version (which can have different utsname values inside a uts namespaces). this patch makes the varying data arguments and changes the string to a format string, using those arguments. Signed-off-by:
Herbert Poetzl <herbert@13thfloor.at> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by:
-
Hidetoshi Seto authored
While running my MCA test (hardware error injection) on 2.6.19, I got some warning like following: > BUG: warning at kernel/irq/migration.c:27/move_masked_irq() > > Call Trace: > [<a000000100013d20>] show_stack+0x40/0xa0 > sp=e00000006b2578d0 bsp=e00000006b2510b0 > [<a000000100013db0>] dump_stack+0x30/0x60 > sp=e00000006b257aa0 bsp=e00000006b251098 > [<a0000001000de430>] move_masked_irq+0xb0/0x240 > sp=e00000006b257aa0 bsp=e00000006b251070 > [<a0000001000de6a0>] move_native_irq+0xe0/0x180 > sp=e00000006b257aa0 bsp=e00000006b251040 > [<a00000010004ff50>] iosapic_end_level_irq+0x30/0xe0 > sp=e00000006b257aa0 bsp=e00000006b251020 > [<a0000001000d94d0>] __do_IRQ+0x170/0x400 > sp=e00000006b257aa0 bsp=e00000006b250fd8 > [<a0000001000116f0>] ia64_handle_irq+0x1b0/0x260 > sp=e00000006b257aa0 bsp=e00000006b250fa8 > [<a00000010000c3a0>] ia64_leave_kernel+0x0/0x280 > sp=e00000006b257aa0 bsp=e00000006b250fa8 > [<a000000100690cf0>] _spin_unlock_irqrestore+0x30/0x60 > sp=e00000006b257c70 bsp=e00000006b250f90 It comes from: [kernel/irq/migration.c] 26 if (CHECK_IRQ_PER_CPU(desc->status)) { 27 WARN_ON(1); 28 return; 29 } By putting some printk in kernel, I found that irqbalance is trying to move CPEI which is handled as PER_CPU irq. That's why. CPEI(Corrected Platform Error Interrupt) is ia64 specific irq, is allowed to pin to particular processor which selected by the platform, and even it is PER_CPU but it has set_affinity handler (=iosapic_set_affinity) as same as other IO-SAPIC-level interrupts. (I don't know why, but I guess that there would be typical situation where the handler for migration is needed, such as hotplug - the processor going to be offline/hot-removed.) To shut up this warning, there are 2 way at least: a) fix CPEI stuff b) prohibit setting affinity to PER_CPU irq I'm not sure what stuff of CPEI need to be fixed, but I think that returning error to attempting move PER_CPU irq is useful for all applications since it will never work. Following small patch takes b) style. It works, the warning disappeared and irqbalance still runs well. Signed-off-by:Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Cc: Arjan van de Ven <arjan@infradead.org> Acked-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Jan Beulich authored
Kallsyms data is never written to, so it can as well benefit from CONFIG_DEBUG_RODATA. Signed-off-by:
Jan Beulich <jbeulich@novell.com> Signed-off-by:
-
Hirokazu Takata authored
This patch supports "m32r-g00ff" bootloader for an OPSPUT platform. Applying this patch, it is possible to do ATA-boot from an IDE drive or HTTP-boot from network by m32r-g00ff. * arch/m32r/boot/compressed/m32r_sio.c: Fix hangup on OPSPUT at boot. * arch/m32r/kernel/io_opsput.c: IDE support for OPSPUT. * arch/m32r/kernel/setup_opsput.c: ditto. * include/asm-m32r/ide.h: ditto. Signed-off-by:Kazuhiro Inaoka <inaoka@linux-m32r.org> Signed-off-by:
Hirokazu Takata <takata@linux-m32r.org> Signed-off-by:
-
Hirokazu Takata authored
Don't mask the lower 12-bit of the page fault address. In the current m32r kernel implementation, we use an access exception to detect page faults. This patch fixes ace_handler (access exception handler) for m32r. In order to check userspace address in do_page_fault, we have to pass full 32-bit address to do_page_fault. Signed-off-by:
-
Hirokazu Takata authored
This patch is for supporting a synthesizable M32700 core for the Mappi-II FPGA board. On the core, location of MFT (Multi-Function Timer) registers is slightly different from the M32700 chip. Signed-off-by:
-
Hirokazu Takata authored
The m32r kernel 2.6.18-rc1 or after cause build errors of "unknown isa configuration" for userspace application programs, such as glibc, gdb, etc. This is because the recent kernel do not include linux/config.h not to expose kernel headers for userspace. To fix the above compile errors, this patch fixes two headers ptrace.h and sigcontext.h for m32r and makes them platform-independent. Signed-off-by:
-
Paul Jackson authored
fallback_alloc() could end up calling cpuset_zone_allowed() with interrupts disabled (by code in kmem_cache_alloc_node()), but without __GFP_HARDWALL set, leading to a possible call of a sleeping function with interrupts disabled. This results in the BUG report: BUG: sleeping function called from invalid context at kernel/cpuset.c:1520 in_atomic():0, irqs_disabled():1 Thanks to Paul Menage for catching this one. Signed-off-by:
Paul Jackson <pj@sgi.com> Cc: Paul Menage <menage@google.com> Signed-off-by:
-
Randy Dunlap authored
journal_stop() is not defined for ext4; change to ext4_journal_stop(). Signed-off-by:
Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by:
-
Dmitry Torokhov authored
try_to_freeze() was moved into include/linux/freezer.h Signed-off-by:Dmitry Torokhov <dtor@mail.ru>
-
Paul Mundt authored
The bus for this was removed entirely some time ago, as well as most of the drivers that referenced it. maple_keyb seems to have been the odd one out, and was still sitting in the source tree (though not actually part of the build system). Kill off the rest of it.. Signed-off-by:
Paul Mundt <lethal@linux-sh.org> Signed-off-by:
-
Dmitry Torokhov authored
We already had entry for Fujitsu Lifebook P7010 in the nomux blacklist but for some reason Fujitsu decided to fiddle with DMI data... Signed-off-by:
-
