- 07 Sep, 2011 14 commits
-
-
Ali Bahar authored
Rework efuse data handling. Signed-off-by:
Ali Bahar <ali@internetDog.org> Signed-off-by:
Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Ali Bahar authored
Refactor the TX code to prepare for aggregation. Signed-off-by:
-
Ali Bahar authored
translate_scan() now uses the stack for some variables, instead of mallocing. Signed-off-by:
-
Ali Bahar authored
stop_drv_timers() is now done in r871xu_dev_remove(), not netdev_close(). Signed-off-by:
-
Ali Bahar authored
The call to oid_rt_pro_set_power_tracking_hdl() is no longer available. The function's definition remains, though it is currently unused. Signed-off-by:
-
Ali Bahar authored
recv_frame.mem mp_xmit_frame.mem mp_xmit_packet.mem were not used, and so are now removed. Signed-off-by:
-
Ali Bahar authored
These are the new include directives for header files. The following were (somehow!) not explicity in Realtek's, but proved necessary: "linux/usb.h" is needed for usb_alloc_urb(); "linux/interrupt.h" is needed for tasklet_struct. It was often a nested include. Signed-off-by:
-
Ali Bahar authored
Removed the redundant NULL check in LedControl871x. As noted by Dan Carpenter, the address of a stack variable is never NULL. Signed-off-by:
-
Ali Bahar authored
MSECS was never used in this driver. So removed. Signed-off-by:
-
Ali Bahar authored
Replaced (Realtek's) _usb_submit_urb by (linux's own) usb_submit_urb. Signed-off-by:
-
Ali Bahar authored
Replaced (Realtek's) _usb_alloc_urb by (linux's own) usb_alloc_urb. Signed-off-by:
-
Ali Bahar authored
Replaced (Realtek's) os_free_netdev by (linux's own) free_netdev. Signed-off-by:
-
Ali Bahar authored
Renamed _netdev_priv to netdev_priv. Signed-off-by:
-
Ali Bahar authored
Only copyright banners have been added to these files. No functional changes. Signed-off-by:
-
- 06 Sep, 2011 26 commits
-
-
Jerome Marchand authored
When the allocation of zram->table fails, we set zram->disksize to zero to prevent accessing the unallocated table entries during cleanup. However, we currently don't take this precaution when the initialization fails earlier. Signed-off-by:
Jerome Marchand <jmarchan@redhat.com> Signed-off-by:
-
Jerome Marchand authored
Currently init_lock only prevents concurrent execution of zram_init_device() and zram_reset_device() but not zram_make_request() nor sysfs store functions. This patch changes init_lock into a rw_semaphore. A write lock is taken by init, reset and store functions, a read lock is taken by zram_make_request(). Also, avoids to release the lock before calling __zram_reset_device() for cleaning after a failed init, thus preventing any concurrent task to see an inconsistent state of zram. Signed-off-by:
-
Mark Einon authored
I believe that the driver is up to date with the latest network driver changes, so removing this line from the TODO to see if anyone else disagrees. Also all useless typecasts are now dead. Signed-off-by:
Mark Einon <mark.einon@gmail.com> Signed-off-by:
-
Mark Einon authored
The ai_force settings were used to set the ethernet speed and duplex manually. This is now being done by the phy_device, so remove. Signed-off-by:
-
Mark Einon authored
This structure is no longer used, and references registers defined in mii.h and other parts of et1310_phy.h Signed-off-by:
-
Mark Einon authored
Replaced et131x_phy.c magic numbers specifying registers and their values with defines, defined in et131x_phy.h Signed-off-by:
-
Mark Einon authored
The VMI_* set of register defines are not used, and duplicate the set of PHY_* registers from the same file, which are used - hence removing. Signed-off-by:
-
Mark Einon authored
cached_mask_value is only ever assigned, never read. Remove it. Signed-off-by:
-
Mark Einon authored
registry_rx_mem_end is not referenced anywhere in the driver. Signed-off-by:
-
Mark Einon authored
As et131x_adjust_link is called from the phydev in response to a netif_carrier_[on|off], and is the only caller of et131x_mii_check, we don't need to call netif_carrier_[on|off] again. Signed-off-by:
-
Mark Einon authored
The PHY interrupt is now handled by the phy_device, and the equivalent code is present in et131x_adjust_link, called from the phy_device when needed. Signed-off-by:
-
Mark Einon authored
adapter->speed_duplex was never referenced. adapter->registry_phy_coma was always set to zero, even in the vendor driver. Removing all member references and associated dead code. Signed-off-by:
-
Mark Einon authored
The phy device keeps a note of the duplex mode, so use that value instead of duplex mode. Also use the phydev defines for duplex modes, and remove the driver private ones. Signed-off-by:
-
Mark Einon authored
The phy device keeps a note of the link speed, so use that value instead of the driver private one. Also use the phydev defines for link speeds, and remove the driver private ones. adapter->hw_errs was never used, even in the vendor driver, so remove that too. Signed-off-by:
-
Mark Einon authored
I think the kernel style cleanups are done now. Adding myself as a recipient of patches. Signed-off-by:
-
Mark Einon authored
Some of my previous hacking attempts have not been following the rules. All fixes either lines > 80 chars or whitespace corrections (spaces->tabs etc). Signed-off-by:
-
Larry Finger authored
Signed-off-by:
-
Mark Einon authored
Use defines from include/linux/mii.h instead of et131x_phy.h and delete the latter defines. Signed-off-by:
-
Michal Marek authored
Remove dead and unused code in sbecom_inline_linux.h. This also fixes a build failure under Turkish locale, where include/config/modversions.h is incorrectly named as modversIons.h (an unrelated kbuild bug) and the driver tries to needlessly include the empty file. Reported-by:
Serdar KÖYLÜ <s.koylux@gmail.com> Cc: Bob Beers <bob.beers@gmail.com> Signed-off-by:
Michal Marek <mmarek@suse.cz> Signed-off-by:
-
Alexey Khoroshilov authored
If sep_ioctl() is called from a process that does not own current transaction, it unlocks unheld sep->ioctl_mutex and returns -EACCES leaving sep->sep_mutex acquired. The patch fixes the mutex lock-unlock mismatch. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by:
Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by:
-
Pelle Windestam authored
Fixed the checkpatch warning about sing simple_strtoul instead of kstrtoul() in panel.c. Signed-off-by:
Pelle Windestam <iceaway@gmail.com> Signed-off-by:
-
Mark Einon authored
Now we are using a phy_device, remove driver functionality that is now handled by the phydev. Signed-off-by:
-
Mark Einon authored
Use the phy_device equivalents instead. Signed-off-by:
-
Mark Einon authored
Handing over ioctls handled by the driver to the phydev. Signed-off-by:
-
Alexey Khoroshilov authored
mei_open() acquires dev->device_lock mutex and try to allocate mei_cl, but if the allocation fails it goes to return statement. As a result dev->device_lock left locked. The patch fixes goto to unlock dev->device_lock mutex on this path. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by:
-
Roland Vossen authored
Substituted macro. Reported-by:
Johannes Berg <johannes@sipsolutions.net> Reported-by:
Joe Perches <joe@perches.com> Reviewed-by:
Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by:
Arend van Spriel <arend@broadcom.com> Signed-off-by:
Roland Vossen <rvossen@broadcom.com> Signed-off-by:
-
