- 08 Oct, 2006 28 commits
-
-
Trond Myklebust authored
Commit ca4aa096 fixed waiting for the structure to get initialised, but it is also possible to break out of the loop while still in TASK_INTERRUPTIBLE. Replace the whole thing by wait_event_interruptible, which is much more readable, and doesn't suffer from these problems. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Al Viro authored
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Al Viro authored
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Al Viro authored
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Al Viro authored
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Al Viro authored
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Al Viro authored
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Al Viro authored
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Al Viro authored
titan_dispatch_irqs() always gets get_irq_regs() as argument; kill the argument and collapse set_irq_regs() in body. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Al Viro authored
do set_irq_regs() in caller, kill pt_regs argument. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Al Viro authored
isa_no_iack_sc_device_interrupt() always gets get_irq_regs() as argument; kill that argument. All but two callers of handle_irq() pass get_irq_regs() as argument; convert the remaining two, kill set_irq_regs() inside handle_irq(). Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Al Viro authored
callers of ->device_interrupt() do set_irq_regs() now; pt_regs argument removed, remaining uses of regs in instances of ->device_interrupt() are switched to get_irq_regs() and will be gone in the next patch. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Al Viro authored
Fallout from previous patch: - actually add include/asm-m68k/irq_regs.h - missed the prototype of sun3_sched_init() NB: git diff without argumentgs sucks when you've added some files... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Al Viro authored
read_trylock() is broken on sparc32 (doesn't build and didn't work right, actually). Proposed fix: - make "writer holds lock" distinguishable from "reader tries to grab lock" - have __raw_read_trylock() try to acquire the mutex (in LSB of lock), terminating spin if we see that there's writer holding it. Then do the rest as we do in read_lock(). Thanks to Ingo for discussion... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Al Viro authored
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Al Viro authored
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Linus Torvalds authored
Merge branch 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6 * 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6: ieee1394: nodemgr: fix startup of knodemgrd
-
git://git.parisc-linux.org/git/linux-2.6Linus Torvalds authored
* 'irq-fixes' of git://git.parisc-linux.org/git/linux-2.6: [PARISC] More pt_regs removal [PARISC] pdc_init no longer exists [PARISC] Make firmware calls irqsafe-ish... [PA-RISC] Fix boot breakage [PARISC] Use set_irq_regs
-
Eric W. Biederman authored
The problem we can't take advantage of lowest priority delivery mode if the vectors are allocated for only one cpu at a time. Nor can we work around hardware that assumes lowest priority delivery mode is always used with several cpus. So this patch introduces the concept of a vector_allocation_domain. A set of cpus that will receive an irq on the same vector. Currently the code for implementing this is placed in the genapic structure so we can vary this depending on how we are using the io_apics. This allows us to restore the previous behaviour of genapic_flat without removing the benefits of having separate vector allocation for large machines. This should also fix the problem report where a hyperthreaded cpu was receving the irq on the wrong hyperthread when in logical delivery mode because the previous behaviour is restored. This patch properly records our allocation of the first 16 irqs to the first 16 available vectors on all cpus. This should be fine but it may run into problems with multiple interrupts at the same interrupt level. Except for some badly maintained comments in the code and the behaviour of the interrupt allocator I have no real understanding of that problem. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Acked-by: Muli Ben-Yehuda <muli@il.ibm.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Eric W. Biederman authored
Which vector an irq is assigned to now varies dynamically and is not needed outside of io_apic.c. So remove the possibility of accessing the information outside of io_apic.c and remove the silly macro that makes looking for users of irq_vector difficult. The fact this compiles ensures there aren't any more pieces of the old CONFIG_PCI_MSI weirdness that I failed to remove. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Eric W. Biederman authored
In commit ace80ab7 I removed the weird logic that used the vector number as the irq number when MSI was defined. However pci_enable_irq was using a different test in the io_apic_assign_irqs path and I missed it :( This patch removes the wrong code so no one hits this problem. This code is only active when a specific set of boot command line parameters is specified which likely explains why no one has notices this earlier. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Trond Myklebust authored
NFS_CS_INITING > NFS_CS_READY, so instead of waiting for the structure to get initialised, we currently immediately jump out of the loop without ever sleeping. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Stefan Richter authored
Revert a thinko in commit d2f119fe: When knodemgrd starts, it needs to sleep until host->generation was incremented above its initial value of 0. My wrong logic caused it to start sending requests when the bus wasn't completely ready. Seen as "AT dma reset ctx=0, aborting transmission" messages in 2.6.19-rc1. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
-
Yoichi Yuasa authored
Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Ralf Baechle authored
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Karl-Johan Karlsson authored
Currently, /proc/cpuinfo contains several copies of the information for whatever processor we happen to be scheduled on. This patch makes it contain the proper information for each CPU, which is particularly useful on mixed R12k/R10k IP27 machines. Signed-off-by: Karl-Johan Karlsson <creideiki@lysator.liu.se> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Scott Ashcroft authored
A kernel built with HZ==250 runs about 4 four times too quickly on a Cobalt RaQ2. Signed-off-by: Scott Ashcroft <scott.ashcroft@talk21.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Ralf Baechle authored
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
- 07 Oct, 2006 12 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpcLinus Torvalds authored
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: [POWERPC] PReP fixup after irq changes [POWERPC] SPU fixup after irq changes [POWERPC] Fix up after irq changes [POWERPC] Fix iseries/smp.c for irq breakage [POWERPC] Fix viocons for irq breakage [POWERPC] Update iseries_defconfig [POWERPC] Fix fsl_soc build breaks [POWERPC] Minor fix for bootargs property [POWERPC] Update MTFSF_L() comment [POWERPC] Update pSeries defconfig for SATA [POWERPC] Don't get PCI IRQ from OF for devices with no IRQ [POWERPC] Fix zImage decompress location [POWERPC] linux,tce-size property is 32 bits [POWERPC] Add DTS for MPC8349E-mITX board [POWERPC] Fix harmless typo [PPC] Fix some irq breakage with ARCH=ppc
-
Al Viro authored
... and now with irq_regs.h not forgotten... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Al Viro authored
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Acked-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Al Viro authored
m68k_handle_int() split in two functions: __m68k_handle_int() takes pt_regs * and does set_irq_regs(); m68k_handle_int() doesn't get pt_regs *. Places where we used to call m68k_handle_int() recursively with the same pt_regs have simply lost the second argument, the rest is switched to __m68k_handle_int(). The rest of patch is just dropping pt_regs * where needed. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Eric Eric Sesterhenn authored
null pointer dereferencing in reiserfs_read_bitmap_block. Signed-off-by: Alexander Zarochentsev <zam@namesys.com> Cc: Jeff Mahoney <jeffm@suse.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Rafael J. Wysocki authored
Unfortunately one of the recent changes in swsusp has broken the userland suspend on SMP. Fix it. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Christoph Lameter authored
Init list is called with a list parameter that is not equal to the cachep->nodelists entry under NUMA if more than one node exists. This is fully legitimatei. One may want to populate the list fields before switching nodelist pointers. Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Olaf Hering authored
Compile fixes for PReP in ARCH=ppc. Signed-off-by: Olaf Hering <olaf@aepfle.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
-
Olaf Hering authored
Remove struct pt_regs * from remaining spu irq functions. Signed-off-by: Olaf Hering <olaf@aepfle.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
-
Olaf Hering authored
Remove struct pt_regs * from all handlers. Also remove the regs argument from get_irq() functions. Compile tested with arch/powerpc/config/* and arch/ppc/configs/prep_defconfig Signed-off-by: Olaf Hering <olaf@aepfle.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
-
Matthew Wilcox authored
Remove pt_regs from ipi_interrupt and timer_interrupt. Inline smp_do_timer() into its only caller, and unify the SMP and non-SMP paths. Fixes a profiling bug. Signed-off-by: Matthew Wilcox <matthew@wil.cx>
-
Matthew Wilcox authored
Just a stale prototype Signed-off-by: Matthew Wilcox <matthew@wil.cx>
-