- 05 Jul, 2016 11 commits
-
-
Michael Ellerman authored
These are useful little loops for smoke testing performance. Signed-off-by:
Anton Blanchard <anton@samba.org> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Cyril Bur authored
Currently it doesn't appear the resulting binary actually uses any Altivec or VSX instructions the solution is to explicitly tell GCC to use vector instructions and use vector types in the code. Part of this this issue can be GCC version specific: GCC 4.9.x is happy to use Altivec and VSX instructions if altivec.h is includedi (and possibly if vector types are used), this also means that 4.9.x will use VSX instructions even if only -maltivec is passed. It is also possible that Altivec instructions will be used even without -maltivec or -mabi=altivec. GCC 5.2.x complains about the lack of -maltivec parameter if altivec.h is included and will not use VSX unless -mvsx is present on commandline. GCC 5.3.0 has a regression that means __attribute__((__target__("no-vsx")) fails to build. A fix is targeted for 5.4. Furthermore LTO (Link Time Optimisation) doesn't play well with __attribute__((__target__("no-vsx")), LTO can cause GCC to forget about the attribute and compile with VSX instructions regardless. Be wary when enabling -flfo for this test. Signed-off-by:Cyril Bur <cyrilbur@gmail.com> Signed-off-by:
-
Cyril Bur authored
When we inverted the behaviour of the flags we forgot to update the usage message. Fixes: 51c21e72 ("selftests/powerpc: Make context_switch touch FP/altivec/vector by default") Signed-off-by:
-
Cyril Bur authored
Excerpt from man 2 perf_event_open: /proc/sys/kernel/perf_event_paranoid The perf_event_paranoid file can be set to restrict access to the performance counters. 2 allow only user-space measurements. 1 allow both kernel and user measurements (default). 0 allow access to CPU-specific data but not raw tracepoint samples. -1 no restrictions. require_paranoia_below() should return 0 if perf_event_paranoid is below a specified level, the value from perf_event_paranoid is read into an unsigned long so the incorrect value is returned when perf_event_paranoid is set to -1. Without this patch applied there is the same number of selftests/powerpc which skip when /proc/sys/kernel/perf_event_paranoid is set to 1 or -1 but no skips when set to zero. With this patch applied there are no skipped selftests/powerpc test when /proc/sys/kernel/perf_event_paranoid is set to 0 or -1. Signed-off-by: -
Madhavan Srinivasan authored
Export the generic hardware and cache perf events for Power9 to sysfs, so users can determine the PMU event monitored. Signed-off-by:
Madhavan Srinivasan <maddy@linux.vnet.ibm.com> Signed-off-by:
-
Madhavan Srinivasan authored
This patch adds base enablement for the power9 PMU. Signed-off-by:
-
Madhavan Srinivasan authored
Add macros for the generic and cache events on Power9 Signed-off-by:
-
Madhavan Srinivasan authored
Factor out the power8 pmu init functions to share with power9. Monitor Mode Control Register S(MMCRS) and Monitor Mode Control Register H(MMCRH) registers are dropped in Power9. These registers are added to new function which are included for power8 init. Signed-off-by:
-
Madhavan Srinivasan authored
Factor out some of the power8 pmu functions to new file "isa207-common.c" to share with power9 pmu code. Only code movement and no logic change Signed-off-by:
-
Madhavan Srinivasan authored
Factor out some of the power8 pmu macros to new a header file to share with power9 pmu code. Just code movement and no logic change. Signed-off-by:
-
Michael Ellerman authored
We spent so much time bike-shedding the printk() we missed that the next line was missing a semi-colon. And it seems none of our defconfigs turn on CONFIG_FA_DUMP. Fixes: 4a03749f ("powerpc/fadump: Trivial fix of spelling mistake, clean up message") Signed-off-by:
-
- 29 Jun, 2016 3 commits
-
-
Suraj Jitindar Singh authored
Implement new character device driver to allow access from user space to the operator panel display present on IBM Power Systems machines with FSPs. This will allow status information to be presented on the display which is visible to a user. The driver implements a character buffer which a user can read/write by accessing the device (/dev/op_panel). This buffer is then displayed on the operator panel display. Any attempt to write past the last character position will have no effect and attempts to write more characters than the size of the display will be truncated. The device may only be accessed by a single process at a time. Signed-off-by:
Suraj Jitindar Singh <sjitindarsingh@gmail.com> Reviewed-by:
Andrew Donnellan <andrew.donnellan@au1.ibm.com> Signed-off-by:
-
Suraj Jitindar Singh authored
An opal_msg of type OPAL_MSG_ASYNC_COMP contains the return code in the params[1] struct member. However this isn't intuitive or obvious when reading the code and requires that a user look at the skiboot documentation or opal-api.h to verify this. Add an inline function to get the return code from an opal_msg and update call sites accordingly. Signed-off-by:
-
Suraj Jitindar Singh authored
Add a binding to Documentation/devicetree/bindings/powerpc/opal (oppanel-opal.txt) for the operator panel which is present on IBM Power Systems machines with FSPs. Signed-off-by:
Rob Herring <robh@kernel.org> Acked-by:
Stewart Smith <stewart@linux.vnet.ibm.com> Signed-off-by:
-
- 28 Jun, 2016 4 commits
-
-
Michael Neuling authored
This provides AFU drivers a means to associate private data with a cxl context. This is particularly intended for make the new callbacks for driver specific events easier for AFU drivers to use, as they can easily get back to any private data structures they may use. Signed-off-by:
Michael Neuling <mikey@neuling.org> Signed-off-by:
Ian Munsie <imunsie@au1.ibm.com> Signed-off-by: Philippe Bergheaud <felix@linux.vnet.ibm.com Reviewed-by:
Matthew R. Ochs <mrochs@linux.vnet.ibm.com> Reviewed-by:
-
Philippe Bergheaud authored
This adds an afu_driver_ops structure with fetch_event() and event_delivered() callbacks. An AFU driver such as cxlflash can fill this out and associate it with a context to enable passing custom AFU specific events to userspace. This also adds a new kernel API function cxl_context_pending_events(), that the AFU driver can use to notify the cxl driver that new specific events are ready to be delivered, and wake up anyone waiting on the context wait queue. The current count of AFU driver specific events is stored in the field afu_driver_events of the context structure. The cxl driver checks the afu_driver_events count during poll, select, read, etc. calls to check if an AFU driver specific event is pending, and calls fetch_event() to obtain and deliver that event. This way, the cxl driver takes care of all the usual locking semantics around these calls and handles all the generic cxl events, so that the AFU driver only needs to worry about it's own events. fetch_event() return a struct cxl_event_afu_driver_reserved, allocated by the AFU driver, and filled in with the specific event information and size. Total event size (header + data) should not be greater than CXL_READ_MIN_SIZE (4K). Th cxl driver prepends an appropriate cxl event header, copies the event to userspace, and finally calls event_delivered() to return the status of the operation to the AFU driver. The event is identified by the context and cxl_event_afu_driver_reserved pointers. Since AFU drivers provide their own means for userspace to obtain the AFU file descriptor (i.e. cxlflash uses an ioctl on their scsi file descriptor to obtain the AFU file descriptor) and the generic cxl driver will never use this event, the ABI of the event is up to each individual AFU driver. Signed-off-by:
Philippe Bergheaud <felix@linux.vnet.ibm.com> Signed-off-by:
-
Colin Ian King authored
Trivial fix to spelling mistake in pr_debug() message. Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Colin Ian King authored
Fix trivial spelling mistake "rgistration". Also use pr_err() instead of printk() and unsplit the string to keep it all on one line. Signed-off-by:
-
- 24 Jun, 2016 7 commits
-
-
Benjamin Herrenschmidt authored
If a PHB has no I/O space, there's no need to make it look like something bad happened, a pr_debug() is plenty enough since this is the case of all our modern POWER chips. Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
-
Naveen N. Rao authored
PPC64 eBPF JIT compiler. Enable with: echo 1 > /proc/sys/net/core/bpf_jit_enable or echo 2 > /proc/sys/net/core/bpf_jit_enable ... to see the generated JIT code. This can further be processed with tools/net/bpf_jit_disasm. With CONFIG_TEST_BPF=m and 'modprobe test_bpf': test_bpf: Summary: 305 PASSED, 0 FAILED, [297/297 JIT'ed] ... on both ppc64 BE and LE. The details of the approach are documented through various comments in the code. Acked-by:
Alexei Starovoitov <ast@kernel.org> Signed-off-by:
Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Signed-off-by:
-
Naveen N. Rao authored
Break out classic BPF JIT specifics into a separate header in preparation for eBPF JIT implementation. Note that ppc32 will still need the classic BPF JIT. Acked-by:
-
Naveen N. Rao authored
1. Per the ISA, ADDIS actually uses RT, rather than RS. Though the result is the same, make the usage clear. 2. The multiply instruction used is a 32-bit multiply. Rename PPC_MUL() to PPC_MULW() to make the same clear. 3. PPC_STW[U] take the entire 16-bit immediate value and do not require word-alignment, per the ISA. Change the macros to use IMM_L(). 4. A few white-space cleanups to satisfy checkpatch.pl. Acked-by:
-
Naveen N. Rao authored
Since we will be using the rotate immediate instructions for extended BPF JIT, let's introduce macros for the same. And since the shift immediate operations use the rotate immediate instructions, let's redo those macros to use the newly introduced instructions. Acked-by:
-
Naveen N. Rao authored
Similar to the LI32() optimization, if the value can be represented in 32-bits, use LI32(). Also handle loading a few specific forms of immediate values in an optimum manner. Acked-by:
-
Naveen N. Rao authored
The existing LI32() macro can sometimes result in a sign-extended 32-bit load that does not clear the top 32-bits properly. As an example, loading 0x7fffffff results in the register containing 0xffffffff7fffffff. While this does not impact classic BPF JIT implementation (since that only uses the lower word for all operations), we would like to share this macro between classic BPF JIT and extended BPF JIT, wherein the entire 64-bit value in the register matters. Fix this by first doing a shifted LI followed by ORI. An additional optimization is with loading values between -32768 to -1, where we now only need a single LI. The new implementation now generates the same or less number of instructions. Acked-by:
-
- 23 Jun, 2016 1 commit
-
-
Shreyas B. Prabhu authored
pnv_init_idle_states() discovers supported idle states from the device tree and does the required initialization. Set power_save function pointer only after this initialization is done Otherwise on machines which don't support nap, eg. Power9, the kernel will crash when it tries to nap. Reviewed-by:
Gautham R. Shenoy <ego@linux.vnet.ibm.com> Signed-off-by:
Shreyas B. Prabhu <shreyas@linux.vnet.ibm.com> Acked-by:
-
- 21 Jun, 2016 14 commits
-
-
Gavin Shan authored
We're initializing "IODA1" and "IODA2" PHBs though they are IODA2 and NPU PHBs as below kernel log indicates. Initializing IODA1 OPAL PHB /pciex@3fffe40700000 Initializing IODA2 OPAL PHB /pciex@3fff000400000 This fixes the PHB names. After it's applied, we get: Initializing IODA2 PHB (/pciex@3fffe40700000) Initializing NPU PHB (/pciex@3fff000400000) Signed-off-by:
Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by:
-
Gavin Shan authored
This adds standalone driver to support PCI hotplug for PowerPC PowerNV platform that runs on top of skiboot firmware. The firmware identifies hotpluggable slots and marked their device tree node with proper "ibm,slot-pluggable" and "ibm,reset-by-firmware". The driver scans device tree nodes to create/register PCI hotplug slot accordingly. The PCI slots are organized in fashion of tree, which means one PCI slot might have parent PCI slot and parent PCI slot possibly contains multiple child PCI slots. At the plugging time, the parent PCI slot is populated before its children. The child PCI slots are removed before their parent PCI slot can be removed from the system. If the skiboot firmware doesn't support slot status retrieval, the PCI slot device node shouldn't have property "ibm,reset-by-firmware". In that case, none of valid PCI slots will be detected from device tree. The skiboot firmware doesn't export the capability to access attention LEDs yet and it's something for TBD. Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Signed-off-by:
-
Gavin Shan authored
This exports 4 functions, which base on the corresponding OPAL APIs to get/set PCI slot status. Those functions are going to be used by PowerNV PCI hotplug driver: pnv_pci_get_device_tree() opal_get_device_tree() pnv_pci_get_presence_state() opal_pci_get_presence_state() pnv_pci_get_power_state() opal_pci_get_power_state() pnv_pci_set_power_state() opal_pci_set_power_state() Signed-off-by:
Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by:
-
Gavin Shan authored
This introduces pnv_pci_get_slot_id() to get the hotpluggable PCI slot ID from the corresponding device node. It will be used by hotplug driver. Requested-by:
-
Gavin Shan authored
The (OPAL) firmware might provide the PCI slot reset capability which is identified by property "ibm,reset-by-firmware" on the PCI slot associated device node. This routes the reset request to firmware if "ibm,reset-by-firmware" exists in the PCI slot device node. Otherwise, the reset is done inside kernel as before. Signed-off-by:
-
Gavin Shan authored
The reset and poll functionality from (OPAL) firmware supports PHB and PCI slot at same time. They are identified by ID. This supports PCI slot ID by: * Rename the argument name for opal_pci_reset() and opal_pci_poll() accordingly * Rename pnv_eeh_phb_poll() to pnv_eeh_poll() and adjust its argument name. * One macro is added to produce PCI slot ID. Signed-off-by: -
Gavin Shan authored
The pdn (struct pci_dn) instances are allocated from memblock or bootmem when creating PCI controller (hoses) in setup_arch(). PCI hotplug, which will be supported by proceeding patches, releases PCI device nodes and their corresponding pdn on unplugging event. The memory chunks for pdn instances allocated from memblock or bootmem are hard to reused after being released. This delays creating pdn by pci_devs_phb_init() from setup_arch() to core_initcall() so that they are allocated from slab. The memory consumed by pdn can be released to system without problem during PCI unplugging time. It indicates that pci_dn is unavailable in setup_arch() and the the fixup on pdn (like AGP's) can't be carried out that time. We have to do that in pcibios_root_bridge_prepare() on maple/pasemi/powermac platforms where/when the pdn is available. pcibios_root_bridge_prepare is called from subsys_initcall() which is executed after core_initcall() so the code flow does not change. At the mean while, the EEH device is created when pdn is populated, meaning pdn and EEH device have same life cycle. In turn, we needn't call eeh_dev_init() to create EEH device explicitly. Signed-off-by:
-
Gavin Shan authored
On the PCI plugging event, PCI slot's subordinate devices are scanned and their (IO and MMIO) resources are assigned. Platform dependent resources (PE#, IO/MMIO/DMA windows) are allocated or created on updating windows of the slot's upstream bridge. This updates the windows of the hot plugged slot's upstream bridge in pcibios_finish_adding_to_bus() so that the platform resources (PE#, IO/MMIO/DMA segments) are allocated or created accordingly. Signed-off-by:
-
Gavin Shan authored
This supports releasing PEs dynamically. A reference count is introduced to PE representing number of PCI devices associated with the PE. The reference count is increased when PCI device joins the PE and decreased when PCI device leaves the PE in pnv_pci_release_device(). When the count becomes zero, the PE and its consumed resources are released. Note that the count is accessed concurrently. So a counter with "int" type is enough here. In order to release the sources consumed by the PE, couple of helper functions are introduced as below: * pnv_pci_ioda1_unset_window() - Unset IODA1 DMA32 window * pnv_pci_ioda1_release_dma_pe() - Release IODA1 DMA32 segments * pnv_pci_ioda2_release_dma_pe() - Release IODA2 DMA resource * pnv_ioda_release_pe_seg() - Unmap IO/M32/M64 segments Signed-off-by:
-
Gavin Shan authored
pnv_ioda_deconfigure_pe() is visible only when CONFIG_PCI_IOV is enabled. The function will be used to tear down PE's associated mapping in PCI hotplug path that doesn't depend on CONFIG_PCI_IOV. This makes pnv_ioda_deconfigure_pe() visible and not depend on CONFIG_PCI_IOV. Signed-off-by:
-
Gavin Shan authored
The PCI slots are associated with root port or downstream ports of the PCIe switch connected to root port. When adapter is hot added to the PCI slot, it usually requests more IO or memory resource from the directly connected parent bridge (port) and update the bridge's windows accordingly. The resource windows of upstream bridges can't be updated automatically. It possibly leads to unbalanced resource across the bridges: The window of downstream bridge is overruning that of upstream bridge. The IO or MMIO path won't work. This resolves the above issue by extending bridge windows of root port and upstream port of the PCIe switch connected to the root port to PHB's windows. The windows of root port and bridge behind that are extended to the PHB's windows to accomodate the PCI hotplug happening in future. The PHB's 64KB 32-bits MSI region is included in bridge's M32 windows (in hardware) though it's excluded in the corresponding resource, as the bridge's M32 windows have 1MB as their minimal alignment. We observed EEH error during system boot when the MSI region is included in bridge's M32 window. This excludes top 1MB (including 64KB 32-bits MSI region) region from bridge's M32 windows when extending them. Signed-off-by:
-
Gavin Shan authored
There is no parent bridge for root bus, meaning pcibios_setup_bridge() isn't invoked for root bus. The PE for root bus is the ancestor of other PEs in PELTV. It means we need PE for root bus populated before all others. This populates the PE for root bus in pcibios_setup_bridge() path if it's not populated yet. The PE number next to the reserved one is used as the PE# to avoid holes in continuous M64 space. Signed-off-by:
-
Gavin Shan authored
Currently, the PEs and their associated resources are assigned in ppc_md.pcibios_fixup() except those used by SRIOV VFs. The function is called for once after PCI probing and resources assignment is completed. So it's obviously not hotplug friendly. This creates PEs dynamically in pcibios_setup_bridge() that is called for the event during system bootup and PCI hotplug: updating PCI bridge's windows after resource assignment/reassignment are done. In partial hotplug case, not all PCI devices included to one particular PE are unplugged and plugged again, we just need unbinding/binding the hot added PCI devices with the corresponding PE without creating new one. The change is applied to IODA1 and IODA2 PHBs only. The behaviour on NPU PHBs aren't changed. There are no PCI bridges on NPU PHBs, meaning pcibios_setup_bridge() won't be invoked there. We have to use old path (pnv_pci_ioda_fixup()) to setup PEs on NPU PHBs. Signed-off-by:
-
Gavin Shan authored
PE number for one particular PE can be allocated dynamically or reserved according to the consumed M64 (64-bits prefetchable) segments of the PE. The M64 segment can't be remapped to arbitrary PE, meaning the PE number is determined according to the index of the consumed M64 segment. As below figure shows, M64 resource grows from low to high end, meaning the PE (number) reserved according to M64 segment grows from low to high end as well, so does the dynamically allocated PE number. It will lead to conflict: PE number (M64 segment) reserved by dynamic allocation is required by hot added PCI adapter at later point. It fails the PCI hotplug because of the PE number can't be reserved based on the index of the consumed M64 segment. +---+---+---+---+---+--------------------------------+-----+ | 0 | 1 | 2 | 3 | 4 | ....... | 255 | +---+---+---+---+---+--------------------------------+-----+ PE number for dynamic allocation -----------------> PE number reserved for M64 segment -----------------> To resolve above conflicts, this forces the PE number to be allocated dynamically in reverse order. With this patch applied, the PE numbers are reserved in ascending order, but allocated dynamically in reverse order. Signed-off-by:
-
