- 25 Aug, 2017 4 commits
-
-
Shaohua Li authored
Dan reported this: The patch 2984c868: "nullb: factor disk parameters" from Aug 14, 2017, leads to the following Smatch complaint: drivers/block/null_blk.c:1759 null_init_tag_set() error: we previously assumed 'nullb' could be null (see line 1750) 1755 set->cmd_size = sizeof(struct nullb_cmd); 1756 set->flags = BLK_MQ_F_SHOULD_MERGE; 1757 set->driver_data = NULL; 1758 1759 if (nullb->dev->blocking) ^^^^^^^^^^^^^^^^^^^^ And an unchecked dereference. nullb could be NULL here. Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Shaohua Li <shli@fb.com> Signed-off-by:
Jens Axboe <axboe@kernel.dk>
-
weiping zhang authored
this patch fix two errors, firstly avoid kfree blk_root, secondly not free(blkcg) ,if blkcg alloc fail(blkcg == NULL), just unlock that mutex; Signed-off-by:
weiping zhang <zhangweiping@didichuxing.com> Signed-off-by:
-
Jens Axboe authored
Update to a working one, the fusionio address hasn't been valid in 4 years. Signed-off-by: -
Omar Sandoval authored
Normally I wouldn't bother with this, but in my opinion the comments are the most important part of this whole file since without them no one would have any clue how this insanity works. Signed-off-by:
Omar Sandoval <osandov@fb.com> Signed-off-by:
-
- 24 Aug, 2017 3 commits
-
-
Bart Van Assche authored
This patch avoids that sparse reports the following warning messages: block/compat_ioctl.c:85:11: warning: incorrect type in assignment (different address spaces) block/compat_ioctl.c:85:11: expected unsigned long *[noderef] <asn:1>p block/compat_ioctl.c:85:11: got void [noderef] <asn:1>* block/compat_ioctl.c:91:21: warning: incorrect type in argument 1 (different address spaces) block/compat_ioctl.c:91:21: expected void const volatile [noderef] <asn:1>*<noident> block/compat_ioctl.c:91:21: got unsigned long *[noderef] <asn:1>p block/compat_ioctl.c:87:53: warning: dereference of noderef expression block/compat_ioctl.c:91:21: warning: dereference of noderef expression Fixes: commit d597580d ("generic ...copy_..._user primitives") Signed-off-by:
Bart Van Assche <bart.vanassche@wdc.com> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
weiping zhang authored
put_device(pdev) will call pdev->type->release finally, and blk_free_devt has been called in part_release(), so remove it. Signed-off-by:
-
Milan Broz authored
In dm-integrity target we register integrity profile that have both generate_fn and verify_fn callbacks set to NULL. This is used if dm-integrity is stacked under a dm-crypt device for authenticated encryption (integrity payload contains authentication tag and IV seed). In this case the verification is done through own crypto API processing inside dm-crypt; integrity profile is only holder of these data. (And memory is owned by dm-crypt as well.) After the commit (and previous changes) Commit 7c20f116 Author: Christoph Hellwig <hch@lst.de> Date: Mon Jul 3 16:58:43 2017 -0600 bio-integrity: stop abusing bi_end_io we get this crash: : BUG: unable to handle kernel NULL pointer dereference at (null) : IP: (null) : *pde = 00000000 ... : : Workqueue: kintegrityd bio_integrity_verify_fn : task: f48ae180 task.stack: f4b5c000 : EIP: (null) : EFLAGS: 00210286 CPU: 0 : EAX: f4b5debc EBX: 00001000 ECX: 00000001 EDX: 00000000 : ESI: 00001000 EDI: ed25f000 EBP: f4b5dee8 ESP: f4b5dea4 : DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 : CR0: 80050033 CR2: 00000000 CR3: 32823000 CR4: 001406d0 : Call Trace: : ? bio_integrity_process+0xe3/0x1e0 : bio_integrity_verify_fn+0xea/0x150 : process_one_work+0x1c7/0x5c0 : worker_thread+0x39/0x380 : kthread+0xd6/0x110 : ? process_one_work+0x5c0/0x5c0 : ? kthread_worker_fn+0x100/0x100 : ? kthread_worker_fn+0x100/0x100 : ret_from_fork+0x19/0x24 : Code: Bad EIP value. : EIP: (null) SS:ESP: 0068:f4b5dea4 : CR2: 0000000000000000 Patch just skip the whole verify workqueue if verify_fn is set to NULL. Fixes: 7c20f116 ("bio-integrity: stop abusing bi_end_io") Signed-off-by:
Milan Broz <gmazyland@gmail.com> [hch: trivial whitespace fix] Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
-
- 23 Aug, 2017 23 commits
-
-
weiping zhang authored
if elv_register fail, bfq_pool should be free. Signed-off-by:
-
Christoph Hellwig authored
This way we don't need a block_device structure to submit I/O. The block_device has different life time rules from the gendisk and request_queue and is usually only available when the block device node is open. Other callers need to explicitly create one (e.g. the lightnvm passthrough code, or the new nvme multipathing code). For the actual I/O path all that we need is the gendisk, which exists once per block device. But given that the block layer also does partition remapping we additionally need a partition index, which is used for said remapping in generic_make_request. Note that all the block drivers generally want request_queue or sometimes the gendisk, so this removes a layer of indirection all over the stack. Signed-off-by:
-
Christoph Hellwig authored
Signed-off-by:
-
Christoph Hellwig authored
This helper allows looking up a partion under RCU protection without grabbing a reference to it. Signed-off-by:
-
Christoph Hellwig authored
Signed-off-by:
-
Christoph Hellwig authored
The block layer always remaps partitions before calling into the ->make_request methods of drivers. Thus the call to get_start_sect in in_chunk_boundary will always return 0 and can be removed. Reviewed-by:
-
Christoph Hellwig authored
We won't have the struct block_device available in the bio soon, so switch to the numerical dev_t instead of the block_device pointer for looking up the check-integrity state. Reviewed-by:
Liu Bo <bo.li.liu@oracle.com> Signed-off-by:
-
Bart Van Assche authored
Since MSI support on some motherboards is unreliable, change the default interrupt mode from MSI to MSI-X. This patch avoids that the following message appears sporadially in the kernel logs of my test setup: do_IRQ: 3.193 No irq handler for vector Signed-off-by:
-
Bart Van Assche authored
Avoid that normal request completion and the timeout handler can run concurrently by calling blk_mq_complete_request() instead of blk_mq_end_request() from skd_end_request(). Avoid that the block layer can reuse a request while the firmware is still processing it. Convert skd_softirq_done() to blk-mq. Pass the pointer to skd_softirq_done() to the block layer core through blk_mq_ops.complete instead of by calling blk_queue_softirq_done(). Pass the pointer to skd_timed_out() to the block layer core through blk_mq_ops.timeout instead of by calling blk_queue_timed_out(). The timeout handler has been tested as follows: echo 1 > /sys/block/skd0/io-timeout-fail && (cd /sys/kernel/debug/fail_io_timeout && echo 100 > probability && echo N > task-filter && echo 1 > times) Fixes: commit a74d5b76 ("skd: Switch to block layer timeout mechanism") Reported-by: -
Bart Van Assche authored
This patch does not change any functionality but makes the skd driver code more similar to that of other blk-mq kernel drivers. Signed-off-by:
-
Bart Van Assche authored
This patch removes one debug statement but otherwise does not change any functionality. Signed-off-by:
-
Bart Van Assche authored
The timeout handler set by blk_queue_rq_timed_out() is only used in single queue mode. Calling this function for blk-mq drivers is wrong. Hence issue a warning if this function is called by a blk-mq driver. Signed-off-by:
-
Shaohua Li authored
Sometime disk could have tracks broken and data there is inaccessable, but data in other parts can be accessed in normal way. MD RAID supports such disks. But we don't have a good way to test it, because we can't control which part of a physical disk is bad. For a virtual disk, this can be easily controlled. This patch adds a new 'badblock' attribute. Configure it in this way: echo "+1-100" > xxx/badblock, this will make sector [1-100] as bad blocks. echo "-20-30" > xxx/badblock, this will make sector [20-30] good If badblocks are accessed, the nullb disk will return IO error. Other parts of the disk can accessed in normal way. Signed-off-by:
-
Shaohua Li authored
Software must flush disk cache to guarantee data safety. To check if software correctly does disk cache flush, we must know the behavior of disk. But physical disk behavior is uncontrollable. Even software doesn't do the flush, the disk probably does the flush. This patch tries to emulate a cache in the test disk. All write will go to a cache first, when the cache is full, we then flush some data to disk storage. A flush request will flush all data of the cache to disk storage. A FUA write will write to memory store directly and revalidate data in cache. If there is a power failure (by writing to power attribute, 'echo 0 > disk_name/power'), we discard all data in the cache, but preserve the data in disk storage. Later we can power on the disk again as usual (write 1 to 'power' attribute), then we can check data integrity and very if software does everything correctly. A new attribute 'cache_size' (in MB) is added to configure cache size. Based on original patch from Kyungchan Koh Signed-off-by:
Kyungchan Koh <kkc6196@fb.com> Signed-off-by:
-
Shaohua Li authored
In test, we usually expect controllable disk speed. For example, in a raid array, we'd like some disks are fast and some are slow. MD RAID actually has a feature for this. To test the feature, we'd like to make the disk run in specific speed. block throttling probably can be used for this purpose, but it requires cgroup setup. Here we just implement a simple throttling mechanism in the driver. There is slight fluctuation in the mechanism, but it's good enough for test. To configure the bandwidth cap, user sets the 'mbps' attribute. mbps is MB/s. Based on original patch from Kyungchan Koh Signed-off-by:
-
Shaohua Li authored
discard makes sense for memory backed disk. And also it's useful to test if upper layer supports dicard correctly. User configures 'discard' attribute to enable/disable dicard support. Based on original patch from Kyungchan Koh Signed-off-by:
-
Shaohua Li authored
This adds memory backed store in nullb. User configure 'memory_backed' attribute for this. By default, nullb disk doesn't use memory backed store. Based on original patch from Kyungchan Koh Signed-off-by:
-
Shaohua Li authored
We now dynamically create disks. Managing the disk index with ida to avoid bump up the index too much. Signed-off-by:
-
Shaohua Li authored
The device created in nullb configfs interface isn't power on by default. After user configures the device, user can do 'echo 1 > xxx/nullb/device_name/power' to power on the device, which will create a disk. the xxx/nullb/device_name/index is the disk index, so if the index is 2, the new created disk should be named as /dev/nullb2. Note, the 'index' is only valid after disk is power on. 'echo 0 > xxx/nullb/device_name/power' will remove the disk. Note, this doesn't remove the device. To remove the device, user should do 'rmdir xxx/nullb/device_name'. Removing the device will remove the disk too. Signed-off-by:
-
Shaohua Li authored
Add configfs interface for nullb. configfs interface is more flexible and easy to configure in a per-disk basis. Configuration is something like this: mount -t configfs none /mnt Checking which features the driver supports: cat /mnt/nullb/features The 'features' attribute is for future extension. We probably will add new features into the driver, userspace can check this attribute to find the supported features. Create/remove a device: mkdir/rmdir /mnt/nullb/a Then configure the device by setting attributes under /mnt/nullb/a, most of nullb supported module parameters are converted to attributes: size; /* device size in MB */ completion_nsec; /* time in ns to complete a request */ submit_queues; /* number of submission queues */ home_node; /* home node for the device */ queue_mode; /* block interface */ blocksize; /* block size */ irqmode; /* IRQ completion handler */ hw_queue_depth; /* queue depth */ use_lightnvm; /* register as a LightNVM device */ blocking; /* blocking blk-mq device */ use_per_node_hctx; /* use per-node allocation for hardware context */ Note, creating a device doesn't create a disk immediately. Creating a disk is done in two phases: create a device and then power on the device. Next patch will introduce device power on. Based on original patch from Kyungchan Koh Signed-off-by:
-
Shaohua Li authored
When we switch to configfs interface, each disk could have different configuration. To prepare for the change, we move most disk setting to a separate data structure. The existing module parameter interface is kept. The 'nr_devices' and 'shared_tags' don't make sense for per-disk setting, so they are remained as global settings. Signed-off-by:
-
Dan Carpenter authored
My initial impulse was to check for IS_ERR_OR_NULL() but when I looked at this code a bit more closely, we should only need to check for IS_ERR(). The blk_mq_alloc_tag_set() returns negative error codes and zero on success so we can just do an "if (rc) goto err_out;". It's better to preserve the error code anyhow. The blk_mq_init_queue() returns error pointers on failure, it never returns NULL. We can also remove the "q = NULL;" at the start because that's no longer needed. Fixes: ca33dd92 ("skd: Convert to blk-mq") Signed-off-by:
-
Dan Carpenter authored
Someone got too agressive about removing initializations and accidentally removed the "rc = 0;" which is required. Fixes: c830da8c ("skd: Remove superfluous initializations from skd_isr_completion_posted()") Signed-off-by:
-
- 18 Aug, 2017 10 commits
-
-
Bart Van Assche authored
Remove the driver version information because this information is not useful in an upstream kernel driver. Signed-off-by:
-
Bart Van Assche authored
Bump the driver version. Remove the build ID because build IDs do not make sense for an upstream kernel driver. Keep the driver version in the module information but do not report it during every load, unload or probe. Signed-off-by:
-
Bart Van Assche authored
Only take skdev->lock if necessary. Signed-off-by:
-
Bart Van Assche authored
This patch does not change any functionality but makes the code more brief. Signed-off-by:
-
Bart Van Assche authored
Every single coherent DMA memory buffer occupies at least one page. Reduce memory usage by switching from coherent buffers to streaming DMA for I/O requests (struct skd_fitmsg_context) and S/G-lists (struct fit_sg_descriptor[]). Signed-off-by:
-
Bart Van Assche authored
Since skd_device.in_flight is only used to display the number of in-flight requests in debug messages, remove that member and introduce skd_in_flight(). That last function relies on the block layer to determine the number of in flight requests. Signed-off-by:
-
Bart Van Assche authored
Remove the timeout slot variables and rely on the block layer to detect request timeouts. Signed-off-by:
-
Bart Van Assche authored
Introduce a tag set and a blk_mq_ops structure. Set .cmd_size such that struct request and struct skd_request_context are allocated through a single allocation. Remove the skd_request_context.req pointer. Make queue starting asynchronous such that this can occur safely from interrupt context. Use locking to protect skdev->skmsg and *skdev->skmsg against concurrent access from concurrent .queue_rq() calls. Introduce the functions skd_init_request() and skd_exit_request() to set up / clean up the per-request S/G-list. Signed-off-by:
-
Bart Van Assche authored
Set request_queue.cmd_size, introduce skd_init_rq() and skd_exit_rq() and remove skd_device.skreq_table. Signed-off-by:
-
Bart Van Assche authored
Issue a warning if a NULL argument is passed to skd_free_sg_list(). Move this function up to make the blk-mq conversion patch easier to read. Signed-off-by:
-
