- 10 May, 2011 6 commits
-
-
Oliver Hartkopp authored
TTY layer expects 0 if the ldisc->open operation succeeded. Reported-by:
Matvejchikov Ilya <matvejchikov@gmail.com> Signed-off-by:
Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Dan Williams authored
Like other mobile broadband device ethernet interfaces, mark the LG VL600 with the 'wwan' devtype so userspace knows it needs additional configuration via the AT port before the interface can be used. Signed-off-by:
Dan Williams <dcbw@redhat.com> Signed-off-by:
-
Steffen Klassert authored
Unlike the standard case, disabled anti replay detection needs some nontrivial extra treatment on ESN. RFC 4303 states: Note: If a receiver chooses to not enable anti-replay for an SA, then the receiver SHOULD NOT negotiate ESN in an SA management protocol. Use of ESN creates a need for the receiver to manage the anti-replay window (in order to determine the correct value for the high-order bits of the ESN, which are employed in the ICV computation), which is generally contrary to the notion of disabling anti-replay for an SA. So return an error if an ESN state with disabled anti replay detection is inserted for now and add the extra treatment later if we need it. Signed-off-by:
Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by:
-
Steffen Klassert authored
As it is, we assign the outer modes output function to the dst entry when we create the xfrm bundle. This leads to two problems on interfamily scenarios. We might insert ipv4 packets into ip6_fragment when called from xfrm6_output. The system crashes if we try to fragment an ipv4 packet with ip6_fragment. This issue was introduced with git commit ad0081e4 (ipv6: Fragment locally generated tunnel-mode IPSec6 packets as needed). The second issue is, that we might insert ipv4 packets in netfilter6 and vice versa on interfamily scenarios. With this patch we assign the inner mode output function to the dst entry when we create the xfrm bundle. So xfrm4_output/xfrm6_output from the inner mode is used and the right fragmentation and netfilter functions are called. We switch then to outer mode with the output_finish functions. Signed-off-by:
-
Eric Dumazet authored
Commit 44345724 (factorize sync-rcu call in unregister_netdevice_many) mistakenly removed one test from dev_close() Following actions trigger a BUG : modprobe bonding modprobe dummy ifconfig bond0 up ifenslave bond0 dummy0 rmmod dummy dev_close() must not close a non IFF_UP device. With help from Frank Blaschka and Einar EL Lueck Reported-by:
Frank Blaschka <blaschka@linux.vnet.ibm.com> Reported-by:
Einar EL Lueck <ELELUECK@de.ibm.com> Signed-off-by:
Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by:
-
Eric Dumazet authored
ip link add link eth2 eth2.103 type vlan id 103 gvrp on loose_binding on ip link set eth2.103 up rmmod tg3 # driver providing eth2 BUG: unable to handle kernel NULL pointer dereference at (null) IP: [<ffffffffa0030c9e>] garp_request_leave+0x3e/0xc0 [garp] PGD 11d251067 PUD 11b9e0067 PMD 0 Oops: 0000 [#1] SMP last sysfs file: /sys/devices/virtual/net/eth2.104/ifindex CPU 0 Modules linked in: tg3(-) 8021q garp nfsd lockd auth_rpcgss sunrpc libphy sg [last unloaded: x_tables] Pid: 11494, comm: rmmod Tainted: G W 2.6.39-rc6-00261-gfd71257-dirty #580 HP ProLiant BL460c G6 RIP: 0010:[<ffffffffa0030c9e>] [<ffffffffa0030c9e>] garp_request_leave+0x3e/0xc0 [garp] RSP: 0018:ffff88007a19bae8 EFLAGS: 00010286 RAX: 0000000000000000 RBX: ffff88011b5e2000 RCX: 0000000000000002 RDX: 0000000000000000 RSI: 0000000000000175 RDI: ffffffffa0030d5b RBP: ffff88007a19bb18 R08: 0000000000000001 R09: ffff88011bd64a00 R10: ffff88011d34ec00 R11: 0000000000000000 R12: 0000000000000002 R13: ffff88007a19bc48 R14: ffff88007a19bb88 R15: 0000000000000001 FS: 0000000000000000(0000) GS:ffff88011fc00000(0063) knlGS:00000000f77d76c0 CS: 0010 DS: 002b ES: 002b CR0: 000000008005003b CR2: 0000000000000000 CR3: 000000011a675000 CR4: 00000000000006f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process rmmod (pid: 11494, threadinfo ffff88007a19a000, task ffff8800798595c0) Stack: ffff88007a19bb36 ffff88011c84b800 ffff88011b5e2000 ffff88007a19bc48 ffff88007a19bb88 0000000000000006 ffff88007a19bb38 ffffffffa003a5f6 ffff88007a19bb38 670088007a19bba8 ffff88007a19bb58 ffffffffa00397e7 Call Trace: [<ffffffffa003a5f6>] vlan_gvrp_request_leave+0x46/0x50 [8021q] [<ffffffffa00397e7>] vlan_dev_stop+0xb7/0xc0 [8021q] [<ffffffff8137e427>] __dev_close_many+0x87/0xe0 [<ffffffff8137e507>] dev_close_many+0x87/0x110 [<ffffffff8137e630>] rollback_registered_many+0xa0/0x240 [<ffffffff8137e7e9>] unregister_netdevice_many+0x19/0x60 [<ffffffffa00389eb>] vlan_device_event+0x53b/0x550 [8021q] [<ffffffff8143f448>] ? ip6mr_device_event+0xa8/0xd0 [<ffffffff81479d03>] notifier_call_chain+0x53/0x80 [<ffffffff81062539>] __raw_notifier_call_chain+0x9/0x10 [<ffffffff81062551>] raw_notifier_call_chain+0x11/0x20 [<ffffffff8137df82>] call_netdevice_notifiers+0x32/0x60 [<ffffffff8137e69f>] rollback_registered_many+0x10f/0x240 [<ffffffff8137e85f>] rollback_registered+0x2f/0x40 [<ffffffff8137e8c8>] unregister_netdevice_queue+0x58/0x90 [<ffffffff8137e9eb>] unregister_netdev+0x1b/0x30 [<ffffffffa005d73f>] tg3_remove_one+0x6f/0x10b [tg3] We should call vlan_gvrp_request_leave() from unregister_vlan_dev(), not from vlan_dev_stop(), because vlan_gvrp_uninit_applicant() is called right after unregister_netdevice_queue(). In batch mode, unregister_netdevice_queue() doesn’t immediately call vlan_dev_stop(). Signed-off-by:
-
- 09 May, 2011 6 commits
-
-
Tomoya authored
Support new device OKI SEMICONDUCTOR ML7223 IOH(Input/Output Hub). The ML7223 IOH is for MP(Media Phone) use. The ML7223 is companion chip for Intel Atom E6xx series. The ML7223 is completely compatible for Intel EG20T PCH. Signed-off-by:
Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com> Signed-off-by:
-
Toshiharu Okada authored
The checksum judgment was mistaken. Judgment result 0:Correct 1:Wrong This patch fixes the issue. Signed-off-by:Toshiharu Okada <toshiharu-linux@dsn.okisemi.com> Signed-off-by:
-
Toshiharu Okada authored
The collision detection setting was invalid. When collision occurred, because data was not resent, there was an issue to which a transmitting throughput falls. This patch enables the collision detection. Signed-off-by:
-
Matvejchikov Ilya authored
TTY layer expects 0 if the ldisc->open operation succeeded. Signed-off-by : Matvejchikov Ilya <matvejchikov@gmail.com> Acked-by:
Alan Cox <alan@linux.intel.com> Signed-off-by:
-
Somnath Kotur authored
Fixed bug to make sure 'pvid' retrieval will work on big endian hosts. Fixed incorrect comparison between the Rx Completion's 16-bit VLAN TCI and the PVID. Now comparing only the relevant 12 bits corresponding to the VID. Renamed 'vid' field under Rx Completion to 'vlan_tag' to reflect accurate description. Signed-off-by:
Somnath Kotur <somnath.kotur@emulex.com> Signed-off-by:
-
Kleber Sacilotto de Souza authored
Currently EHEA reports to ethtool as supporting 10M, 100M, 1G and 10G and connected to FIBRE independent of the hardware configuration. However, when connected to FIBRE the only supported speed is 10G full-duplex, and the other speeds and modes are only supported when connected to twisted pair. Signed-off-by:
Kleber Sacilotto de Souza <klebers@linux.vnet.ibm.com> Acked-by:
Breno Leitao <leitao@linux.vnet.ibm.com> Signed-off-by:
-
- 08 May, 2011 2 commits
-
-
stephen hemminger authored
TCP Cubic keeps a metric that estimates the amount of delayed acknowledgements to use in adjusting the window. If an abnormally large number of packets are acknowledged at once, then the update could wrap and reach zero. This kind of ACK could only happen when there was a large window and huge number of ACK's were lost. This patch limits the value of delayed ack ratio. The choice of 32 is just a conservative value since normally it should be range of 1 to 4 packets. Signed-off-by:
Stephen Hemminger <shemminger@vyatta.com> Signed-off-by:
-
Ben Hutchings authored
The USB protocol this driver implements appears to require 2 bytes of padding in front of each received packet. This used to be equal to the value of NET_IP_ALIGN on x86, so the driver abused that constant and mostly worked, but this is no longer the case. The driver also mixed up the URB and packet lengths, resulting in 2 bytes of junk at the end of the skb. Introduce a private constant for the 2 bytes of padding; fix this confusion and check for the under-length case. Signed-off-by:
Ben Hutchings <bhutchings@solarflare.com> Signed-off-by:
-
- 06 May, 2011 2 commits
-
-
Roland Dreier authored
Using the vmxnet3 driver produces a lockdep warning because vmxnet3_set_mc(), which is called with mc->mca_lock held, takes adapter->cmd_lock. However, there are a couple of places where adapter->cmd_lock is taken with softirqs enabled, lockdep warns that a softirq that tries to take mc->mca_lock could happen while adapter->cmd_lock is held, leading to an AB-BA deadlock. I'm not sure if this is a real potential deadlock or not, but the simplest and best fix seems to be simply to make sure we take cmd_lock with spin_lock_irqsave() everywhere -- the places with plain spin_lock just look like oversights. The full enormous lockdep warning is: ========================================================= [ INFO: possible irq lock inversion dependency detected ] 2.6.39-rc6+ #1 --------------------------------------------------------- ifconfig/567 just changed the state of lock: (&(&mc->mca_lock)->rlock){+.-...}, at: [<ffffffff81531e9f>] mld_ifc_timer_expire+0xff/0x280 but this lock took another, SOFTIRQ-unsafe lock in the past: (&(&adapter->cmd_lock)->rlock){+.+...} and interrupts could create inverse lock ordering between them. other info that might help us debug this: 4 locks held by ifconfig/567: #0: (rtnl_mutex){+.+.+.}, at: [<ffffffff8147d547>] rtnl_lock+0x17/0x20 #1: ((inetaddr_chain).rwsem){.+.+.+}, at: [<ffffffff810896cf>] __blocking_notifier_call_chain+0x5f/0xb0 #2: (&idev->mc_ifc_timer){+.-...}, at: [<ffffffff8106f21b>] run_timer_softirq+0xeb/0x3f0 #3: (&ndev->lock){++.-..}, at: [<ffffffff81531dd2>] mld_ifc_timer_expire+0x32/0x280 the shortest dependencies between 2nd lock and 1st lock: -> (&(&adapter->cmd_lock)->rlock){+.+...} ops: 11 { HARDIRQ-ON-W at: [<ffffffff8109ad86>] __lock_acquire+0x7f6/0x1e10 [<ffffffff8109ca4d>] lock_acquire+0x9d/0x130 [<ffffffff81571156>] _raw_spin_lock+0x36/0x70 [<ffffffffa000d212>] vmxnet3_alloc_intr_resources+0x22/0x230 [vmxnet3] [<ffffffffa0014031>] vmxnet3_probe_device+0x5f6/0x15c5 [vmxnet3] [<ffffffff812df67f>] local_pci_probe+0x5f/0xd0 [<ffffffff812dfde9>] pci_device_probe+0x119/0x120 [<ffffffff81373df6>] driver_probe_device+0x96/0x1c0 [<ffffffff81373fcb>] __driver_attach+0xab/0xb0 [<ffffffff81372a1e>] bus_for_each_dev+0x5e/0x90 [<ffffffff81373a2e>] driver_attach+0x1e/0x20 [<ffffffff813735b8>] bus_add_driver+0xc8/0x290 [<ffffffff813745b6>] driver_register+0x76/0x140 [<ffffffff812e0046>] __pci_register_driver+0x66/0xe0 [<ffffffffa001b03a>] serio_raw_poll+0x3a/0x60 [serio_raw] [<ffffffff81002165>] do_one_initcall+0x45/0x190 [<ffffffff810aa76b>] sys_init_module+0xfb/0x250 [<ffffffff8157a142>] system_call_fastpath+0x16/0x1b SOFTIRQ-ON-W at: [<ffffffff8109adb7>] __lock_acquire+0x827/0x1e10 [<ffffffff8109ca4d>] lock_acquire+0x9d/0x130 [<ffffffff81571156>] _raw_spin_lock+0x36/0x70 [<ffffffffa000d212>] vmxnet3_alloc_intr_resources+0x22/0x230 [vmxnet3] [<ffffffffa0014031>] vmxnet3_probe_device+0x5f6/0x15c5 [vmxnet3] [<ffffffff812df67f>] local_pci_probe+0x5f/0xd0 [<ffffffff812dfde9>] pci_device_probe+0x119/0x120 [<ffffffff81373df6>] driver_probe_device+0x96/0x1c0 [<ffffffff81373fcb>] __driver_attach+0xab/0xb0 [<ffffffff81372a1e>] bus_for_each_dev+0x5e/0x90 [<ffffffff81373a2e>] driver_attach+0x1e/0x20 [<ffffffff813735b8>] bus_add_driver+0xc8/0x290 [<ffffffff813745b6>] driver_register+0x76/0x140 [<ffffffff812e0046>] __pci_register_driver+0x66/0xe0 [<ffffffffa001b03a>] serio_raw_poll+0x3a/0x60 [serio_raw] [<ffffffff81002165>] do_one_initcall+0x45/0x190 [<ffffffff810aa76b>] sys_init_module+0xfb/0x250 [<ffffffff8157a142>] system_call_fastpath+0x16/0x1b INITIAL USE at: [<ffffffff8109a9e9>] __lock_acquire+0x459/0x1e10 [<ffffffff8109ca4d>] lock_acquire+0x9d/0x130 [<ffffffff81571156>] _raw_spin_lock+0x36/0x70 [<ffffffffa000d212>] vmxnet3_alloc_intr_resources+0x22/0x230 [vmxnet3] [<ffffffffa0014031>] vmxnet3_probe_device+0x5f6/0x15c5 [vmxnet3] [<ffffffff812df67f>] local_pci_probe+0x5f/0xd0 [<ffffffff812dfde9>] pci_device_probe+0x119/0x120 [<ffffffff81373df6>] driver_probe_device+0x96/0x1c0 [<ffffffff81373fcb>] __driver_attach+0xab/0xb0 [<ffffffff81372a1e>] bus_for_each_dev+0x5e/0x90 [<ffffffff81373a2e>] driver_attach+0x1e/0x20 [<ffffffff813735b8>] bus_add_driver+0xc8/0x290 [<ffffffff813745b6>] driver_register+0x76/0x140 [<ffffffff812e0046>] __pci_register_driver+0x66/0xe0 [<ffffffffa001b03a>] serio_raw_poll+0x3a/0x60 [serio_raw] [<ffffffff81002165>] do_one_initcall+0x45/0x190 [<ffffffff810aa76b>] sys_init_module+0xfb/0x250 [<ffffffff8157a142>] system_call_fastpath+0x16/0x1b } ... key at: [<ffffffffa0017590>] __key.42516+0x0/0xffffffffffffda70 [vmxnet3] ... acquired at: [<ffffffff8109ca4d>] lock_acquire+0x9d/0x130 [<ffffffff81571bb5>] _raw_spin_lock_irqsave+0x55/0xa0 [<ffffffffa000de27>] vmxnet3_set_mc+0x97/0x1a0 [vmxnet3] [<ffffffff8146ffa0>] __dev_set_rx_mode+0x40/0xb0 [<ffffffff81470040>] dev_set_rx_mode+0x30/0x50 [<ffffffff81470127>] __dev_open+0xc7/0x100 [<ffffffff814703c1>] __dev_change_flags+0xa1/0x180 [<ffffffff81470568>] dev_change_flags+0x28/0x70 [<ffffffff814da960>] devinet_ioctl+0x730/0x800 [<ffffffff814db508>] inet_ioctl+0x88/0xa0 [<ffffffff814541f0>] sock_do_ioctl+0x30/0x70 [<ffffffff814542a9>] sock_ioctl+0x79/0x2f0 [<ffffffff81188798>] do_vfs_ioctl+0x98/0x570 [<ffffffff81188d01>] sys_ioctl+0x91/0xa0 [<ffffffff8157a142>] system_call_fastpath+0x16/0x1b -> (_xmit_ETHER){+.....} ops: 6 { HARDIRQ-ON-W at: [<ffffffff8109ad86>] __lock_acquire+0x7f6/0x1e10 [<ffffffff8109ca4d>] lock_acquire+0x9d/0x130 [<ffffffff8157124b>] _raw_spin_lock_bh+0x3b/0x70 [<ffffffff81475618>] __dev_mc_add+0x38/0x90 [<ffffffff814756a0>] dev_mc_add+0x10/0x20 [<ffffffff81532c9e>] igmp6_group_added+0x10e/0x1b0 [<ffffffff81533f2d>] ipv6_dev_mc_inc+0x2cd/0x430 [<ffffffff81515e17>] ipv6_add_dev+0x357/0x450 [<ffffffff81519f27>] addrconf_notify+0x2f7/0xb10 [<ffffffff81575c1c>] notifier_call_chain+0x8c/0xc0 [<ffffffff81089586>] raw_notifier_call_chain+0x16/0x20 [<ffffffff814689b7>] call_netdevice_notifiers+0x37/0x70 [<ffffffff8146a944>] register_netdevice+0x244/0x2d0 [<ffffffff8146aa0f>] register_netdev+0x3f/0x60 [<ffffffffa001419b>] vmxnet3_probe_device+0x760/0x15c5 [vmxnet3] [<ffffffff812df67f>] local_pci_probe+0x5f/0xd0 [<ffffffff812dfde9>] pci_device_probe+0x119/0x120 [<ffffffff81373df6>] driver_probe_device+0x96/0x1c0 [<ffffffff81373fcb>] __driver_attach+0xab/0xb0 [<ffffffff81372a1e>] bus_for_each_dev+0x5e/0x90 [<ffffffff81373a2e>] driver_attach+0x1e/0x20 [<ffffffff813735b8>] bus_add_driver+0xc8/0x290 [<ffffffff813745b6>] driver_register+0x76/0x140 [<ffffffff812e0046>] __pci_register_driver+0x66/0xe0 [<ffffffffa001b03a>] serio_raw_poll+0x3a/0x60 [serio_raw] [<ffffffff81002165>] do_one_initcall+0x45/0x190 [<ffffffff810aa76b>] sys_init_module+0xfb/0x250 [<ffffffff8157a142>] system_call_fastpath+0x16/0x1b INITIAL USE at: [<ffffffff8109a9e9>] __lock_acquire+0x459/0x1e10 [<ffffffff8109ca4d>] lock_acquire+0x9d/0x130 [<ffffffff8157124b>] _raw_spin_lock_bh+0x3b/0x70 [<ffffffff81475618>] __dev_mc_add+0x38/0x90 [<ffffffff814756a0>] dev_mc_add+0x10/0x20 [<ffffffff81532c9e>] igmp6_group_added+0x10e/0x1b0 [<ffffffff81533f2d>] ipv6_dev_mc_inc+0x2cd/0x430 [<ffffffff81515e17>] ipv6_add_dev+0x357/0x450 [<ffffffff81519f27>] addrconf_notify+0x2f7/0xb10 [<ffffffff81575c1c>] notifier_call_chain+0x8c/0xc0 [<ffffffff81089586>] raw_notifier_call_chain+0x16/0x20 [<ffffffff814689b7>] call_netdevice_notifiers+0x37/0x70 [<ffffffff8146a944>] register_netdevice+0x244/0x2d0 [<ffffffff8146aa0f>] register_netdev+0x3f/0x60 [<ffffffffa001419b>] vmxnet3_probe_device+0x760/0x15c5 [vmxnet3] [<ffffffff812df67f>] local_pci_probe+0x5f/0xd0 [<ffffffff812dfde9>] pci_device_probe+0x119/0x120 [<ffffffff81373df6>] driver_probe_device+0x96/0x1c0 [<ffffffff81373fcb>] __driver_attach+0xab/0xb0 [<ffffffff81372a1e>] bus_for_each_dev+0x5e/0x90 [<ffffffff81373a2e>] driver_attach+0x1e/0x20 [<ffffffff813735b8>] bus_add_driver+0xc8/0x290 [<ffffffff813745b6>] driver_register+0x76/0x140 [<ffffffff812e0046>] __pci_register_driver+0x66/0xe0 [<ffffffffa001b03a>] serio_raw_poll+0x3a/0x60 [serio_raw] [<ffffffff81002165>] do_one_initcall+0x45/0x190 [<ffffffff810aa76b>] sys_init_module+0xfb/0x250 [<ffffffff8157a142>] system_call_fastpath+0x16/0x1b } ... key at: [<ffffffff827fd868>] netdev_addr_lock_key+0x8/0x1e0 ... acquired at: [<ffffffff8109ca4d>] lock_acquire+0x9d/0x130 [<ffffffff8157124b>] _raw_spin_lock_bh+0x3b/0x70 [<ffffffff81475618>] __dev_mc_add+0x38/0x90 [<ffffffff814756a0>] dev_mc_add+0x10/0x20 [<ffffffff81532c9e>] igmp6_group_added+0x10e/0x1b0 [<ffffffff81533f2d>] ipv6_dev_mc_inc+0x2cd/0x430 [<ffffffff81515e17>] ipv6_add_dev+0x357/0x450 [<ffffffff81519f27>] addrconf_notify+0x2f7/0xb10 [<ffffffff81575c1c>] notifier_call_chain+0x8c/0xc0 [<ffffffff81089586>] raw_notifier_call_chain+0x16/0x20 [<ffffffff814689b7>] call_netdevice_notifiers+0x37/0x70 [<ffffffff8146a944>] register_netdevice+0x244/0x2d0 [<ffffffff8146aa0f>] register_netdev+0x3f/0x60 [<ffffffffa001419b>] vmxnet3_probe_device+0x760/0x15c5 [vmxnet3] [<ffffffff812df67f>] local_pci_probe+0x5f/0xd0 [<ffffffff812dfde9>] pci_device_probe+0x119/0x120 [<ffffffff81373df6>] driver_probe_device+0x96/0x1c0 [<ffffffff81373fcb>] __driver_attach+0xab/0xb0 [<ffffffff81372a1e>] bus_for_each_dev+0x5e/0x90 [<ffffffff81373a2e>] driver_attach+0x1e/0x20 [<ffffffff813735b8>] bus_add_driver+0xc8/0x290 [<ffffffff813745b6>] driver_register+0x76/0x140 [<ffffffff812e0046>] __pci_register_driver+0x66/0xe0 [<ffffffffa001b03a>] serio_raw_poll+0x3a/0x60 [serio_raw] [<ffffffff81002165>] do_one_initcall+0x45/0x190 [<ffffffff810aa76b>] sys_init_module+0xfb/0x250 [<ffffffff8157a142>] system_call_fastpath+0x16/0x1b -> (&(&mc->mca_lock)->rlock){+.-...} ops: 6 { HARDIRQ-ON-W at: [<ffffffff8109ad86>] __lock_acquire+0x7f6/0x1e10 [<ffffffff8109ca4d>] lock_acquire+0x9d/0x130 [<ffffffff8157124b>] _raw_spin_lock_bh+0x3b/0x70 [<ffffffff81532bd5>] igmp6_group_added+0x45/0x1b0 [<ffffffff81533f2d>] ipv6_dev_mc_inc+0x2cd/0x430 [<ffffffff81515e17>] ipv6_add_dev+0x357/0x450 [<ffffffff81ce0d16>] addrconf_init+0x4e/0x183 [<ffffffff81ce0ba1>] inet6_init+0x191/0x2a6 [<ffffffff81002165>] do_one_initcall+0x45/0x190 [<ffffffff81ca4d3f>] kernel_init+0xe3/0x168 [<ffffffff8157b2e4>] kernel_thread_helper+0x4/0x10 IN-SOFTIRQ-W at: [<ffffffff8109ad5e>] __lock_acquire+0x7ce/0x1e10 [<ffffffff8109ca4d>] lock_acquire+0x9d/0x130 [<ffffffff8157124b>] _raw_spin_lock_bh+0x3b/0x70 [<ffffffff81531e9f>] mld_ifc_timer_expire+0xff/0x280 [<ffffffff8106f2a9>] run_timer_softirq+0x179/0x3f0 [<ffffffff810666d0>] __do_softirq+0xc0/0x210 [<ffffffff8157b3dc>] call_softirq+0x1c/0x30 [<ffffffff8100d42d>] do_softirq+0xad/0xe0 [<ffffffff81066afe>] irq_exit+0x9e/0xb0 [<ffffffff8157bd40>] smp_apic_timer_interrupt+0x70/0x9b [<ffffffff8157ab93>] apic_timer_interrupt+0x13/0x20 [<ffffffff8149d857>] rt_do_flush+0x87/0x2a0 [<ffffffff814a16b6>] rt_cache_flush+0x46/0x60 [<ffffffff814e36e0>] fib_disable_ip+0x40/0x60 [<ffffffff814e5447>] fib_inetaddr_event+0xd7/0xe0 [<ffffffff81575c1c>] notifier_call_chain+0x8c/0xc0 [<ffffffff810896e8>] __blocking_notifier_call_chain+0x78/0xb0 [<ffffffff81089736>] blocking_notifier_call_chain+0x16/0x20 [<ffffffff814d8021>] __inet_del_ifa+0xf1/0x2e0 [<ffffffff814d8223>] inet_del_ifa+0x13/0x20 [<ffffffff814da731>] devinet_ioctl+0x501/0x800 [<ffffffff814db508>] inet_ioctl+0x88/0xa0 [<ffffffff814541f0>] sock_do_ioctl+0x30/0x70 [<ffffffff814542a9>] sock_ioctl+0x79/0x2f0 [<ffffffff81188798>] do_vfs_ioctl+0x98/0x570 [<ffffffff81188d01>] sys_ioctl+0x91/0xa0 [<ffffffff8157a142>] system_call_fastpath+0x16/0x1b INITIAL USE at: [<ffffffff8109a9e9>] __lock_acquire+0x459/0x1e10 [<ffffffff8109ca4d>] lock_acquire+0x9d/0x130 [<ffffffff8157124b>] _raw_spin_lock_bh+0x3b/0x70 [<ffffffff81532bd5>] igmp6_group_added+0x45/0x1b0 [<ffffffff81533f2d>] ipv6_dev_mc_inc+0x2cd/0x430 [<ffffffff81515e17>] ipv6_add_dev+0x357/0x450 [<ffffffff81ce0d16>] addrconf_init+0x4e/0x183 [<ffffffff81ce0ba1>] inet6_init+0x191/0x2a6 [<ffffffff81002165>] do_one_initcall+0x45/0x190 [<ffffffff81ca4d3f>] kernel_init+0xe3/0x168 [<ffffffff8157b2e4>] kernel_thread_helper+0x4/0x10 } ... key at: [<ffffffff82801be2>] __key.40877+0x0/0x8 ... acquired at: [<ffffffff810997bc>] check_usage_forwards+0x9c/0x110 [<ffffffff8109a32c>] mark_lock+0x19c/0x400 [<ffffffff8109ad5e>] __lock_acquire+0x7ce/0x1e10 [<ffffffff8109ca4d>] lock_acquire+0x9d/0x130 [<ffffffff8157124b>] _raw_spin_lock_bh+0x3b/0x70 [<ffffffff81531e9f>] mld_ifc_timer_expire+0xff/0x280 [<ffffffff8106f2a9>] run_timer_softirq+0x179/0x3f0 [<ffffffff810666d0>] __do_softirq+0xc0/0x210 [<ffffffff8157b3dc>] call_softirq+0x1c/0x30 [<ffffffff8100d42d>] do_softirq+0xad/0xe0 [<ffffffff81066afe>] irq_exit+0x9e/0xb0 [<ffffffff8157bd40>] smp_apic_timer_interrupt+0x70/0x9b [<ffffffff8157ab93>] apic_timer_interrupt+0x13/0x20 [<ffffffff8149d857>] rt_do_flush+0x87/0x2a0 [<ffffffff814a16b6>] rt_cache_flush+0x46/0x60 [<ffffffff814e36e0>] fib_disable_ip+0x40/0x60 [<ffffffff814e5447>] fib_inetaddr_event+0xd7/0xe0 [<ffffffff81575c1c>] notifier_call_chain+0x8c/0xc0 [<ffffffff810896e8>] __blocking_notifier_call_chain+0x78/0xb0 [<ffffffff81089736>] blocking_notifier_call_chain+0x16/0x20 [<ffffffff814d8021>] __inet_del_ifa+0xf1/0x2e0 [<ffffffff814d8223>] inet_del_ifa+0x13/0x20 [<ffffffff814da731>] devinet_ioctl+0x501/0x800 [<ffffffff814db508>] inet_ioctl+0x88/0xa0 [<ffffffff814541f0>] sock_do_ioctl+0x30/0x70 [<ffffffff814542a9>] sock_ioctl+0x79/0x2f0 [<ffffffff81188798>] do_vfs_ioctl+0x98/0x570 [<ffffffff81188d01>] sys_ioctl+0x91/0xa0 [<ffffffff8157a142>] system_call_fastpath+0x16/0x1b stack backtrace: Pid: 567, comm: ifconfig Not tainted 2.6.39-rc6+ #1 Call Trace: <IRQ> [<ffffffff810996f6>] print_irq_inversion_bug+0x146/0x170 [<ffffffff81099720>] ? print_irq_inversion_bug+0x170/0x170 [<ffffffff810997bc>] check_usage_forwards+0x9c/0x110 [<ffffffff8109a32c>] mark_lock+0x19c/0x400 [<ffffffff8109ad5e>] __lock_acquire+0x7ce/0x1e10 [<ffffffff8109a383>] ? mark_lock+0x1f3/0x400 [<ffffffff8109b497>] ? __lock_acquire+0xf07/0x1e10 [<ffffffff81012255>] ? native_sched_clock+0x15/0x70 [<ffffffff8109ca4d>] lock_acquire+0x9d/0x130 [<ffffffff81531e9f>] ? mld_ifc_timer_expire+0xff/0x280 [<ffffffff8109759d>] ? lock_release_holdtime+0x3d/0x1a0 [<ffffffff8157124b>] _raw_spin_lock_bh+0x3b/0x70 [<ffffffff81531e9f>] ? mld_ifc_timer_expire+0xff/0x280 [<ffffffff8157170b>] ? _raw_spin_unlock+0x2b/0x40 [<ffffffff81531e9f>] mld_ifc_timer_expire+0xff/0x280 [<ffffffff8106f2a9>] run_timer_softirq+0x179/0x3f0 [<ffffffff8106f21b>] ? run_timer_softirq+0xeb/0x3f0 [<ffffffff810122b9>] ? sched_clock+0x9/0x10 [<ffffffff81531da0>] ? mld_gq_timer_expire+0x30/0x30 [<ffffffff810666d0>] __do_softirq+0xc0/0x210 [<ffffffff8109455f>] ? tick_program_event+0x1f/0x30 [<ffffffff8157b3dc>] call_softirq+0x1c/0x30 [<ffffffff8100d42d>] do_softirq+0xad/0xe0 [<ffffffff81066afe>] irq_exit+0x9e/0xb0 [<ffffffff8157bd40>] smp_apic_timer_interrupt+0x70/0x9b [<ffffffff8157ab93>] apic_timer_interrupt+0x13/0x20 <EOI> [<ffffffff81571f14>] ? retint_restore_args+0x13/0x13 [<ffffffff810974a7>] ? lock_is_held+0x17/0xd0 [<ffffffff8149d857>] rt_do_flush+0x87/0x2a0 [<ffffffff814a16b6>] rt_cache_flush+0x46/0x60 [<ffffffff814e36e0>] fib_disable_ip+0x40/0x60 [<ffffffff814e5447>] fib_inetaddr_event+0xd7/0xe0 [<ffffffff81575c1c>] notifier_call_chain+0x8c/0xc0 [<ffffffff810896e8>] __blocking_notifier_call_chain+0x78/0xb0 [<ffffffff81089736>] blocking_notifier_call_chain+0x16/0x20 [<ffffffff814d8021>] __inet_del_ifa+0xf1/0x2e0 [<ffffffff814d8223>] inet_del_ifa+0x13/0x20 [<ffffffff814da731>] devinet_ioctl+0x501/0x800 [<ffffffff8108a3af>] ? local_clock+0x6f/0x80 [<ffffffff81575898>] ? do_page_fault+0x268/0x560 [<ffffffff814db508>] inet_ioctl+0x88/0xa0 [<ffffffff814541f0>] sock_do_ioctl+0x30/0x70 [<ffffffff814542a9>] sock_ioctl+0x79/0x2f0 [<ffffffff810dfe87>] ? __call_rcu+0xa7/0x190 [<ffffffff81188798>] do_vfs_ioctl+0x98/0x570 [<ffffffff8117737e>] ? fget_light+0x33e/0x430 [<ffffffff81571ef9>] ? retint_swapgs+0x13/0x1b [<ffffffff81188d01>] sys_ioctl+0x91/0xa0 [<ffffffff8157a142>] system_call_fastpath+0x16/0x1b Signed-off-by:Roland Dreier <roland@purestorage.com> Signed-off-by:
Shreyas N Bhatewara <sbhatewara@vmware.com> Signed-off-by:
Scott J. Goldman <scottjg@vmware.com> Signed-off-by:
-
Dan Rosenberg authored
A length of zero (after subtracting two for the type and len fields) for the DCCPO_{CHANGE,CONFIRM}_{L,R} options will cause an underflow due to the subtraction. The subsequent code may read past the end of the options value buffer when parsing. I'm unsure of what the consequences of this might be, but it's probably not good. Signed-off-by:Dan Rosenberg <drosenberg@vsecurity.com> Cc: stable@kernel.org Acked-by:
Gerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by:
-
- 05 May, 2011 2 commits
-
-
Kurt Van Dijck authored
RTR frames do have a valid data length code on CAN. The driver for SJA1000 did not handle that situation properly. Signed-off-by:
Kurt Van Dijck <kurt.van.dijck@eia.be> Acked-by:
Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by:
-
Ming Lei authored
This patch makes use of the EVENT_DEV_OPEN flag introduced recently to fix one out of memory issue, which can be reproduced on omap3/4 based pandaboard/beagle XM easily with steps below: - enable runtime pm echo auto > /sys/devices/platform/usbhs-omap.0/ehci-omap.0/usb1/1-1/1-1.1/power/control - ifconfig eth0 up - then out of memroy happened, see [1] for kernel message. Follows my analysis: - 'ifconfig eth0 up' brings eth0 out of suspend, and usbnet_resume is called to schedule dev->bh, then rx urbs are submited to prepare for recieving data; - some usbnet devices will produce garbage rx packets flood if info->reset is not called in usbnet_open. - so there is no enough chances for usbnet_bh to handle and release recieved skb buffers since many rx interrupts consumes cpu, so out of memory for atomic allocation in rx_submit happened. This patch fixes the issue by simply not allowing schedule of usbnet_bh until device is opened. [1], dmesg [ 234.712005] smsc95xx 1-1.1:1.0: rpm_resume flags 0x4 [ 234.712066] usb 1-1.1: rpm_resume flags 0x0 [ 234.712066] usb 1-1: rpm_resume flags 0x0 [ 234.712097] usb usb1: rpm_resume flags 0x0 [ 234.712127] usb usb1: usb auto-resume [ 234.712158] ehci-omap ehci-omap.0: resume root hub [ 234.754028] hub 1-0:1.0: hub_resume [ 234.754821] hub 1-0:1.0: port 1: status 0507 change 0000 [ 234.756011] hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0000 [ 234.756042] hub 1-0:1.0: rpm_resume flags 0x4 [ 234.756072] usb usb1: rpm_resume flags 0x0 [ 234.756164] usb usb1: rpm_resume returns 1 [ 234.756195] hub 1-0:1.0: rpm_resume returns 0 [ 234.756195] hub 1-0:1.0: rpm_suspend flags 0x4 [ 234.756225] hub 1-0:1.0: rpm_suspend returns 0 [ 234.756256] usb usb1: rpm_resume returns 0 [ 234.757141] usb 1-1: usb auto-resume [ 234.793151] ehci-omap ehci-omap.0: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT [ 234.816558] usb 1-1: finish resume [ 234.817871] hub 1-1:1.0: hub_resume [ 234.818420] hub 1-1:1.0: port 1: status 0507 change 0000 [ 234.820495] ehci-omap ehci-omap.0: reused qh eec50220 schedule [ 234.820495] usb 1-1: link qh256-0001/eec50220 start 1 [1/0 us] [ 234.820587] usb 1-1: rpm_resume returns 0 [ 234.820800] hub 1-1:1.0: state 7 ports 5 chg 0000 evt 0000 [ 234.820800] hub 1-1:1.0: rpm_resume flags 0x4 [ 234.820831] hub 1-1:1.0: rpm_resume returns 0 [ 234.820861] hub 1-1:1.0: rpm_suspend flags 0x4 [ 234.820861] hub 1-1:1.0: rpm_suspend returns 0 [ 234.821777] usb 1-1.1: usb auto-resume [ 234.868591] hub 1-1:1.0: state 7 ports 5 chg 0000 evt 0002 [ 234.868591] hub 1-1:1.0: rpm_resume flags 0x4 [ 234.868621] hub 1-1:1.0: rpm_resume returns 0 [ 234.868652] hub 1-1:1.0: rpm_suspend flags 0x4 [ 234.868652] hub 1-1:1.0: rpm_suspend returns 0 [ 234.879486] usb 1-1.1: finish resume [ 234.880279] usb 1-1.1: rpm_resume returns 0 [ 234.880310] smsc95xx 1-1.1:1.0: rpm_resume returns 0 [ 238.880187] ksoftirqd/0: page allocation failure. order:0, mode:0x20 [ 238.880218] Backtrace: [ 238.880249] [<c01b9800>] (dump_backtrace+0x0/0xf8) from [<c065e1dc>] (dump_stack+0x18/0x1c) [ 238.880249] r6:00000000 r5:00000000 r4:00000020 r3:00000002 [ 238.880310] [<c065e1c4>] (dump_stack+0x0/0x1c) from [<c026ece4>] (__alloc_pages_nodemask+0x620/0x724) [ 238.880340] [<c026e6c4>] (__alloc_pages_nodemask+0x0/0x724) from [<c02986d4>] (kmem_getpages.clone.34+0x34/0xc8) [ 238.880371] [<c02986a0>] (kmem_getpages.clone.34+0x0/0xc8) from [<c02988f8>] (cache_grow.clone.42+0x84/0x154) [ 238.880371] r6:ef871aa4 r5:ef871a80 r4:ef81fd40 r3:00000020 [ 238.880401] [<c0298874>] (cache_grow.clone.42+0x0/0x154) from [<c0298b64>] (cache_alloc_refill+0x19c/0x1f0) [ 238.880432] [<c02989c8>] (cache_alloc_refill+0x0/0x1f0) from [<c0299804>] (kmem_cache_alloc+0x90/0x190) [ 238.880462] [<c0299774>] (kmem_cache_alloc+0x0/0x190) from [<c052e260>] (__alloc_skb+0x34/0xe8) [ 238.880493] [<c052e22c>] (__alloc_skb+0x0/0xe8) from [<bf0509f4>] (rx_submit+0x2c/0x1d4 [usbnet]) [ 238.880523] [<bf0509c8>] (rx_submit+0x0/0x1d4 [usbnet]) from [<bf050d38>] (rx_complete+0x19c/0x1b0 [usbnet]) [ 238.880737] [<bf050b9c>] (rx_complete+0x0/0x1b0 [usbnet]) from [<bf006fd0>] (usb_hcd_giveback_urb+0xa8/0xf4 [usbcore]) [ 238.880737] r8:eeeced34 r7:eeecec00 r6:eeecec00 r5:00000000 r4:eec2dd20 [ 238.880767] r3:bf050b9c [ 238.880859] [<bf006f28>] (usb_hcd_giveback_urb+0x0/0xf4 [usbcore]) from [<bf03c8f8>] (ehci_urb_done+0xb0/0xbc [ehci_hcd]) [ 238.880859] r6:00000000 r5:eec2dd20 r4:eeeced44 r3:eec2dd34 [ 238.880920] [<bf03c848>] (ehci_urb_done+0x0/0xbc [ehci_hcd]) from [<bf040204>] (qh_completions+0x308/0x3bc [ehci_hcd]) [ 238.880920] r7:00000000 r6:eeda21a0 r5:ffdfe3c0 r4:eeda21ac [ 238.880981] [<bf03fefc>] (qh_completions+0x0/0x3bc [ehci_hcd]) from [<bf040ef8>] (scan_async+0xb0/0x16c [ehci_hcd]) [ 238.881011] [<bf040e48>] (scan_async+0x0/0x16c [ehci_hcd]) from [<bf040fec>] (ehci_work+0x38/0x90 [ehci_hcd]) [ 238.881042] [<bf040fb4>] (ehci_work+0x0/0x90 [ehci_hcd]) from [<bf042940>] (ehci_irq+0x300/0x34c [ehci_hcd]) [ 238.881072] r4:eeeced34 r3:00000001 [ 238.881134] [<bf042640>] (ehci_irq+0x0/0x34c [ehci_hcd]) from [<bf006828>] (usb_hcd_irq+0x40/0xac [usbcore]) [ 238.881195] [<bf0067e8>] (usb_hcd_irq+0x0/0xac [usbcore]) from [<c0239764>] (handle_irq_event_percpu+0xb8/0x240) [ 238.881225] r6:eec504e0 r5:0000006d r4:eec504e0 r3:bf0067e8 [ 238.881256] [<c02396ac>] (handle_irq_event_percpu+0x0/0x240) from [<c0239930>] (handle_irq_event+0x44/0x64) [ 238.881256] [<c02398ec>] (handle_irq_event+0x0/0x64) from [<c023bbd0>] (handle_level_irq+0xe0/0x114) [ 238.881286] r6:0000006d r5:c080c14c r4:c080c100 r3:00020000 [ 238.881317] [<c023baf0>] (handle_level_irq+0x0/0x114) from [<c01ab090>] (asm_do_IRQ+0x90/0xd0) [ 238.881317] r5:00000000 r4:0000006d [ 238.881347] [<c01ab000>] (asm_do_IRQ+0x0/0xd0) from [<c06624d0>] (__irq_svc+0x50/0x134) [ 238.881378] Exception stack(0xef837e20 to 0xef837e68) [ 238.881378] 7e20: 00000001 00185610 016cc000 c00490c0 eb380000 ef800540 00000020 00004ae0 [ 238.881408] 7e40: 00000020 bf0509f4 60000013 ef837e9c ef837e40 ef837e68 c0226f0c c0298ca0 [ 238.881408] 7e60: 20000013 ffffffff [ 238.881408] r5:fa240100 r4:ffffffff [ 238.881439] [<c0298bb8>] (__kmalloc_track_caller+0x0/0x1d0) from [<c052e284>] (__alloc_skb+0x58/0xe8) [ 238.881469] [<c052e22c>] (__alloc_skb+0x0/0xe8) from [<bf0509f4>] (rx_submit+0x2c/0x1d4 [usbnet]) [ 238.881500] [<bf0509c8>] (rx_submit+0x0/0x1d4 [usbnet]) from [<bf0513d8>] (usbnet_bh+0x1b4/0x250 [usbnet]) [ 238.881530] [<bf051224>] (usbnet_bh+0x0/0x250 [usbnet]) from [<c01f912c>] (tasklet_action+0xb0/0x1f8) [ 238.881530] r6:00000000 r5:ef9757f0 r4:ef9757ec r3:bf051224 [ 238.881561] [<c01f907c>] (tasklet_action+0x0/0x1f8) from [<c01f97ac>] (__do_softirq+0x140/0x290) [ 238.881561] r8:00000006 r7:00000101 r6:00000000 r5:c0806098 r4:00000001 [ 238.881591] r3:c01f907c [ 238.881622] [<c01f966c>] (__do_softirq+0x0/0x290) from [<c01f99cc>] (run_ksoftirqd+0xd0/0x1f4) [ 238.881622] [<c01f98fc>] (run_ksoftirqd+0x0/0x1f4) from [<c02113b0>] (kthread+0x90/0x98) [ 238.881652] r7:00000013 r6:c01f98fc r5:00000000 r4:ef831efc [ 238.881683] [<c0211320>] (kthread+0x0/0x98) from [<c01f62f4>] (do_exit+0x0/0x374) [ 238.881713] r6:c01f62f4 r5:c0211320 r4:ef831efc [ 238.881713] Mem-info: [ 238.881744] Normal per-cpu: [ 238.881744] CPU 0: hi: 186, btch: 31 usd: 38 [ 238.881744] CPU 1: hi: 186, btch: 31 usd: 169 [ 238.881774] HighMem per-cpu: [ 238.881774] CPU 0: hi: 90, btch: 15 usd: 66 [ 238.881774] CPU 1: hi: 90, btch: 15 usd: 86 [ 238.881805] active_anon:544 inactive_anon:71 isolated_anon:0 [ 238.881805] active_file:926 inactive_file:2538 isolated_file:0 [ 238.881805] unevictable:0 dirty:10 writeback:0 unstable:0 [ 238.881805] free:57782 slab_reclaimable:864 slab_unreclaimable:186898 [ 238.881805] mapped:632 shmem:144 pagetables:50 bounce:0 [ 238.881835] Normal free:1328kB min:3532kB low:4412kB high:5296kB active_anon:0kB inactive_anon:0kB active_file:880kB inactive_file:848kB unevictable:0kB isolated(anon):0kB isolated(file):0kB present:780288kB mlocked:0kB dirty:36kB writeback:0kB mapped:0kB shmem:0kB slab_reclaimable:3456kB slab_unreclaimable:747592kB kernel_stack:392kB pagetables:200kB unstable:0kB bounce:0kB writeback_tmp:0kB pages_scanned:0 all_unreclaimable? no [ 238.881866] lowmem_reserve[]: 0 1904 1904 [ 238.881896] HighMem free:229800kB min:236kB low:508kB high:784kB active_anon:2176kB inactive_anon:284kB active_file:2824kB inactive_file:9304kB unevictable:0kB isolated(anon):0kB isolated(file):0kB present:243712kB mlocked:0kB dirty:4kB writeback:0kB mapped:2528kB shmem:576kB slab_reclaimable:0kB slab_unreclaimable:0kB kernel_stack:0kB pagetables:0kB unstable:0kB bounce:0kB writeback_tmp:0kB pages_scanned:0 all_unreclaimable? no [ 238.881927] lowmem_reserve[]: 0 0 0 [ 238.881958] Normal: 0*4kB 4*8kB 6*16kB 0*32kB 1*64kB 1*128kB 0*256kB 2*512kB 0*1024kB 0*2048kB 0*4096kB = 1344kB [ 238.882019] HighMem: 6*4kB 2*8kB 4*16kB 4*32kB 1*64kB 1*128kB 0*256kB 2*512kB 3*1024kB 0*2048kB 55*4096kB = 229800kB [ 238.882080] 3610 total pagecache pages [ 238.882080] 0 pages in swap cache [ 238.882080] Swap cache stats: add 0, delete 0, find 0/0 [ 238.882110] Free swap = 0kB [ 238.882110] Total swap = 0kB [ 238.933776] 262144 pages of RAM [ 238.933776] 58240 free pages [ 238.933776] 10503 reserved pages [ 238.933776] 187773 slab pages [ 238.933807] 2475 pages shared [ 238.933807] 0 pages swap cached Signed-off-by:
Ming Lei <tom.leiming@gmail.com> Acked-by:
Oliver Neukum <oneukum@suse.de> Signed-off-by:
-
- 04 May, 2011 1 commit
-
-
Eric Dumazet authored
Commit 4a94445c (net: Use ip_route_input_noref() in input path) added a bug in IP defragmentation handling, in case timeout is fired. When a frame is defragmented, we use last skb dst field when building final skb. Its dst is valid, since we are in rcu read section. But if a timeout occurs, we take first queued fragment to build one ICMP TIME EXCEEDED message. Problem is all queued skb have weak dst pointers, since we escaped RCU critical section after their queueing. icmp_send() might dereference a now freed (and possibly reused) part of memory. Calling skb_dst_drop() and ip_route_input_noref() to revalidate route is the only possible choice. Reported-by:
Denys Fedoryshchenko <denys@visp.net.lb> Signed-off-by:
-
- 02 May, 2011 9 commits
-
-
Lucian Adrian Grijincu authored
ctl_table_headers registered with register_net_sysctl_table should have been unregistered with the equivalent unregister_net_sysctl_table Signed-off-by:
Lucian Adrian Grijincu <lucian.grijincu@gmail.com> Signed-off-by:
-
Jiri Pirko authored
84c49d8c ("veth: remove unneeded ifname code from veth_newlink()") caused regression on veth creation. This patch reverts the original one. Reported-by:
Michał Mirosław <mirqus@gmail.com> Signed-off-by:
Jiri Pirko <jpirko@redhat.com> Signed-off-by:
-
Rabin Vincent authored
The reset loop check should check the MII_BMCR register value for BMCR_RESET rather than for MII_BMCR (the register address, which also happens to be zero). Signed-off-by:
Rabin Vincent <rabin@rab.in> Signed-off-by:
-
Rafael J. Wysocki authored
tg3 is supposed to enable WoL by default on adapters which support that, but it fails to do so unless the adapter's /sys/devices/.../power/wakeup file contains 'enabled' during the initialization of the adapter. Fix that by making tg3 use device_set_wakeup_enable() to enable wakeup automatically whenever WoL should be enabled by default. Signed-off-by:
Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by:
-
Lifeng Sun authored
ioctl() calls against a socket with an inappropriate ioctl operation are incorrectly returning EINVAL rather than ENOTTY: [ENOTTY] Inappropriate I/O control operation. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=33992Signed-off-by:Lifeng Sun <lifongsun@gmail.com> Signed-off-by:
-
Joe Perches authored
Signed-off-by:
Joe Perches <joe@perches.com> Signed-off-by:
-
-
Alexey Dobriyan authored
fib_trie_table() is called during netns creation and Chromium uses clone(CLONE_NEWNET) to sandbox renderer process. Don't print anything. Signed-off-by:
Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by:
-
Eric W. Biederman authored
This fixes the following oops discovered by Dan Aloni: > Anyway, the following is the output of the Oops that I got on the > Ubuntu kernel on which I first detected the problem > (2.6.37-12-generic). The Oops that followed will be more useful, I > guess. >[ 5594.669852] BUG: unable to handle kernel NULL pointer dereference > at (null) > [ 5594.681606] IP: [<ffffffff81550b7b>] unix_dgram_recvmsg+0x1fb/0x420 > [ 5594.687576] PGD 2a05d067 PUD 2b951067 PMD 0 > [ 5594.693720] Oops: 0002 [#1] SMP > [ 5594.699888] last sysfs file: The bug was that unix domain sockets use a pseduo packet for connecting and accept uses that psudo packet to get the socket. In the buggy seqpacket case we were allowing unconnected sockets to call recvmsg and try to receive the pseudo packet. That is always wrong and as of commit 7361c36c the pseudo packet had become enough different from a normal packet that the kernel started oopsing. Do for seqpacket_recv what was done for seqpacket_send in 2.5 and only allow it on connected seqpacket sockets. Cc: stable@kernel.org Tested-by:
Dan Aloni <dan@aloni.org> Signed-off-by:
Eric W. Biederman <ebiederm@xmission.com> Signed-off-by:
-
- 29 Apr, 2011 7 commits
-
-
artpol authored
Add support of pause frames advertise in mii_get_an. This provides all drivers that use mii_ethtool_gset to represent their own and Link partner flow control abilities in ethtool. Signed-off-by:
Artem Polyakov <artpol84@gmail.com> Signed-off-by:
-
Adam Jaremko authored
Signed-off-by:
Adam Jaremko <adam.jaremko@gmail.com> Acked-by:
Po-Yu Chuang <ratbert@faraday-tech.com> Signed-off-by:
-
Oliver Neukum authored
Somebody has to do it, however unfortunate be the cause. Signed-off-by:
-
Dan Williams authored
Some newer Huawei devices (T-Mobile Rocket, others) have cdc-ether compatible ports, so recognize and expose them. Signed-off-by:
-
Neil Horman authored
This oops was recently reported to me: invalid opcode: 0000 [#1] SMP last sysfs file: /sys/devices/pci0000:00/0000:00:01.0/0000:01:0d.0/0000:02:05.0/device CPU 1 Modules linked in: bnx2(+) sunrpc ipv6 dm_mirror dm_region_hash dm_log sg microcode serio_raw amd64_edac_mod edac_core edac_mce_amd k8temp i2c_piix4 shpchp ext4 mbcache jbd2 sd_mod crc_t10dif mptsas mptscsih mptbase scsi_transport_sas radeon ttm drm_kms_helper drm hwmon i2c_algo_bit i2c_core dm_mod [last unloaded: bnx2] Modules linked in: bnx2(+) sunrpc ipv6 dm_mirror dm_region_hash dm_log sg microcode serio_raw amd64_edac_mod edac_core edac_mce_amd k8temp i2c_piix4 shpchp ext4 mbcache jbd2 sd_mod crc_t10dif mptsas mptscsih mptbase scsi_transport_sas radeon ttm drm_kms_helper drm hwmon i2c_algo_bit i2c_core dm_mod [last unloaded: bnx2] Pid: 23900, comm: pidof Not tainted 2.6.32-130.el6.x86_64 #1 BladeCenter LS21 -[797251Z]- RIP: 0010:[<ffffffffa058b270>] [<ffffffffa058b270>] 0xffffffffa058b270 RSP: 0018:ffff880002083e48 EFLAGS: 00010246 RAX: ffff880002083e90 RBX: ffff88007ccd4000 RCX: 0000000000000000 RDX: 0000000000000100 RSI: dead000000200200 RDI: ffff8800007b8700 RBP: ffff880002083ed0 R08: ffff88000208db40 R09: 0000022d191d27c8 R10: 0000000000000000 R11: 0000000000000000 R12: ffff8800007b9bc8 R13: ffff880002083e90 R14: ffff8800007b8700 R15: ffffffffa058b270 FS: 00007fbb3bcf7700(0000) GS:ffff880002080000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000001664a98 CR3: 0000000060395000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process pidof (pid: 23900, threadinfo ffff8800007e8000, task ffff8800091c0040) Stack: ffffffff81079f77 ffffffff8109e010 ffff88007ccd5c20 ffff88007ccd5820 <0> ffff88007ccd5420 ffff8800007e9fd8 ffff8800007e9fd8 0000010000000000 <0> ffff88007ccd5020 ffff880002083e90 ffff880002083e90 ffffffff8102a00d Call Trace: <IRQ> [<ffffffff81079f77>] ? run_timer_softirq+0x197/0x340 [<ffffffff8109e010>] ? tick_sched_timer+0x0/0xc0 [<ffffffff8102a00d>] ? lapic_next_event+0x1d/0x30 [<ffffffff8106f737>] __do_softirq+0xb7/0x1e0 [<ffffffff81092cc0>] ? hrtimer_interrupt+0x140/0x250 [<ffffffff81185f90>] ? filldir+0x0/0xe0 [<ffffffff8100c2cc>] call_softirq+0x1c/0x30 [<ffffffff8100df05>] do_softirq+0x65/0xa0 [<ffffffff8106f525>] irq_exit+0x85/0x90 [<ffffffff814e3340>] smp_apic_timer_interrupt+0x70/0x9b [<ffffffff8100bc93>] apic_timer_interrupt+0x13/0x20 <EOI> [<ffffffff81211ba5>] ? selinux_file_permission+0x45/0x150 [<ffffffff81262a75>] ? _atomic_dec_and_lock+0x55/0x80 [<ffffffff812050c6>] security_file_permission+0x16/0x20 [<ffffffff811861c1>] vfs_readdir+0x71/0xe0 [<ffffffff81186399>] sys_getdents+0x89/0xf0 [<ffffffff8100b172>] system_call_fastpath+0x16/0x1b It occured during some stress testing, in which the reporter was repeatedly removing and modprobing the bnx2 module while doing various other random operations on the bnx2 registered net device. Noting that this error occured on a serdes based device, we noted that there were a few ethtool operations (most notably self_test and set_phys_id) that have execution paths that lead into bnx2_setup_serdes_phy. This function is notable because it executes a mod_timer call, which starts the bp->timer running. Currently bnx2 is setup to assume that this timer only nees to be stopped when bnx2_close or bnx2_suspend is called. Since the above ethtool operations are not gated on the net device having been opened however, that assumption is incorrect, and can lead to the timer still running after the module has been removed, leading to the oops above (as well as other simmilar oopses). Fix the problem by ensuring that the timer is stopped when pci_device_unregister is called. Signed-off-by:
Neil Horman <nhorman@tuxdriver.com> Reported-by:
Hushan Jia <hjia@redhat.com> CC: Michael Chan <mchan@broadcom.com> CC: "David S. Miller" <davem@davemloft.net> Acked-by:
Michael Chan <mchan@broadcom.com> Signed-off-by:
-
Stanislaw Gruszka authored
Need to use broadcast sta_id for management frames, otherwise we broke BA session in the firmware and get messages like that: "Received BA when not expected" or (on older kernels): "BA scd_flow 0 does not match txq_id 10" This fix regression introduced in 2.6.35 during station management code rewrite by: commit 2a87c26b Author: Johannes Berg <johannes.berg@intel.com> Date: Fri Apr 30 11:30:45 2010 -0700 iwlwifi: use iwl_find_station less Signed-off-by:
Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by:
John W. Linville <linville@tuxdriver.com>
-
Stanislaw Gruszka authored
Need to use broadcast sta_id for management frames, otherwise we broke BA session in the firmware and get messages like that: "Received BA when not expected" or (on older kernels): "BA scd_flow 0 does not match txq_id 10" This fix regression introduced in 2.6.35 during station management code rewrite by: commit 2a87c26b Author: Johannes Berg <johannes.berg@intel.com> Date: Fri Apr 30 11:30:45 2010 -0700 iwlwifi: use iwl_find_station less Patch partially resolve: https://bugzilla.kernel.org/show_bug.cgi?id=16691 However, there are still 11n performance problems on 4965 and 5xxx devices that need to be investigated. Cc: stable@kernel.org # 2.6.35+ Signed-off-by:
Johannes Berg <johannes@sipsolutions.net> Acked-by:
Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by:
-
- 28 Apr, 2011 5 commits
-
-
Peter Korsgaard authored
The 88e6085 has a few differences from the other devices in the port control registers, causing unknown multicast/broadcast packets to get dropped when using the standard port setup. At the same time update kconfig to clarify that the mv88e6085 is now supported. Signed-off-by:
Peter Korsgaard <jacmet@sunsite.dk> Acked-by:
Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by:
-
Paul Stewart authored
Resubmit interrupt URB if device is open. Use a flag set in usbnet_open() to determine this state. Also kill and free interrupt URB in usbnet_disconnect(). [Rebased off git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git] Signed-off-by:
Paul Stewart <pstew@chromium.org> Signed-off-by:
-
Stanislaw Gruszka authored
Fix the following: WARNING: at drivers/net/wireless/iwlegacy/iwl-4965.c:1128 \ iwl4965_send_tx_power+0x61/0x102 [iwl4965]() Hardware name: [...] TX Power requested while scanning! Pid: 5723, comm: kworker/u:28 Not tainted 2.6.39-0.rc4.4.fc14.x86_64 #1 Call Trace: [<ffffffff8104e27b>] warn_slowpath_common+0x85/0x9d [<ffffffffa02782e0>] ? iwl4965_show_temperature+0x49/0x49 [iwl4965] [<ffffffff8104e336>] warn_slowpath_fmt+0x46/0x48 [<ffffffffa027712f>] iwl4965_send_tx_power+0x61/0x102 [iwl4965] [<ffffffff81477e05>] ? mutex_lock+0x36/0x50 [<ffffffffa0278337>] iwl4965_bg_txpower_work+0x57/0x73 [iwl4965] [<ffffffff810647f3>] process_one_work+0x18d/0x286 [<ffffffff81065a5e>] worker_thread+0xfd/0x181 [<ffffffff81065961>] ? manage_workers.clone.16+0x172/0x172 [<ffffffff81069036>] kthread+0x82/0x8a [<ffffffff81480524>] kernel_thread_helper+0x4/0x10 [<ffffffff81068fb4>] ? kthread_worker_fn+0x14b/0x14b [<ffffffff81480520>] ? gs_change+0x13/0x13 Reported-and-tested-by:
Paul Bolle <pebolle@tiscali.nl> Signed-off-by:
-
Wey-Yi Guy authored
commit 5ed540ae change the led behavior for iwlwifi driver; the side effect cause led blink all the time. Modify the led blink table to fix this problem Signed-off-by:
-
Rafał Miłecki authored
Signed-off-by:
Rafał Miłecki <zajec5@gmail.com> Signed-off-by:
-
