- 26 Dec, 2013 5 commits
-
-
Gu Zheng authored
Previously, we need to calculate the max orphan num when we try to acquire an orphan inode, but it's a stable value since the super block was inited. So converting it to a field of f2fs_sb_info and use it directly when needed seems a better choose. Signed-off-by:
Gu Zheng <guz.fnst@cn.fujitsu.com> Signed-off-by:
Jaegeuk Kim <jaegeuk.kim@samsung.com>
-
Jaegeuk Kim authored
The f2fs supports 4KB block size. If user requests dwrite with under 4KB data, it allocates a new 4KB data block. However, f2fs doesn't add zero data into the untouched data area inside the newly allocated data block. This incurs an error during the xfstest #263 test as follow. 263 12s ... [failed, exit status 1] - output mismatch (see 263.out.bad) --- 263.out 2013-03-09 03:37:15.043967603 +0900 +++ 263.out.bad 2013-12-27 04:20:39.230203114 +0900 @@ -1,3 +1,976 @@ QA output created by 263 fsx -N 10000 -o 8192 -l 500000 -r PSIZE -t BSIZE -w BSIZE -Z -fsx -N 10000 -o 128000 -l 500000 -r PSIZE -t BSIZE -w BSIZE -Z +fsx -N 10000 -o 8192 -l 500000 -r PSIZE -t BSIZE -w BSIZE -Z +truncating to largest ever: 0x12a00 +truncating to largest ever: 0x75400 +fallocating to largest ever: 0x79cbf ... (Run 'diff -u 263.out 263.out.bad' to see the entire diff) Ran: 263 Failures: 263 Failed 1 of 1 tests It turns out that, when the test tries to write 2KB data with dio, the new dio path allocates 4KB data block without filling zero data inside the remained 2KB area. Finally, the output file contains a garbage data for that region. Signed-off-by: -
Jaegeuk Kim authored
When get_dnode_of_data() in get_data_block() returns a successful dnode, we should put the dnode. But, previously, if its data block address is equal to NEW_ADDR, we didn't do that, resulting in a deadlock condition. So, this patch splits original error conditions with this case, and then calls f2fs_put_dnode before finishing the function. Signed-off-by: -
Jaegeuk Kim authored
This patch introduces F2FS_INODE that returns struct f2fs_inode * from the inode page. By using this macro, we can remove unnecessary casting codes like below. struct f2fs_inode *ri = &F2FS_NODE(inode_page)->i; -> struct f2fs_inode *ri = F2FS_INODE(inode_page); Reviewed-by:
Chao Yu <chao2.yu@samsung.com> Signed-off-by:
-
Chao Yu authored
In current flow, we will get Null return value of f2fs_find_entry in recover_dentry when name.len is bigger than F2FS_NAME_LEN, and then we still add this inode into its dir entry. To avoid this situation, we must check filename length before we use it. Another point is that we could remove the code of checking filename length In f2fs_find_entry, because f2fs_lookup will be called previously to ensure of validity of filename length. V2: o add WARN_ON() as Jaegeuk Kim suggested. Signed-off-by:
-
- 23 Dec, 2013 35 commits
-
-
Chao Yu authored
When we rename a dir to new name which is not exist previous, we will set pino of parent inode with ino of child inode in f2fs_set_link. It destroy consistency of pino, it should be fixed. Thanks for previous work of Shu Tan. Signed-off-by:
Shu Tan <shu.tan@samsung.com> Signed-off-by:
-
Chao Yu authored
Update several comments: 1. use f2fs_{un}lock_op install of mutex_{un}lock_op. 2. update comment of get_data_block(). 3. update description of node offset. Signed-off-by: -
Gu Zheng authored
When using the f2fs_io_info in the low level, we still need to merge the rw and rw_flag, so use the rw to hold all the io flags directly, and remove the rw_flag field. ps.It is based on the previous patch: f2fs: move all the bio initialization into __bio_alloc Signed-off-by:
-
Gu Zheng authored
Move all the bio initialization into __bio_alloc, and some minor cleanups are also added. v3: Use 'bool' rather than 'int' as Kim suggested. v2: Use 'is_read' rather than 'rw' as Yu Chao suggested. Remove the needless initialization of bio->bi_private. Signed-off-by:
-
Jaegeuk Kim authored
This patch adds a description about small_disacrds in the f2fs document. Signed-off-by: -
Jaegeuk Kim authored
This patch enhances writing dirty meta pages collectively in background. During the file data writes, it'd better avoid to write small dirty meta pages frequently. So let's give a chance to collect a number of dirty meta pages for a while. Signed-off-by: -
Jaegeuk Kim authored
Previously, f2fs doesn't support direct IOs with high performance, which throws every write requests via the buffered write path, resulting in highly performance degradation due to memory opeations like copy_from_user. This patch introduces a new direct IO path in which every write requests are processed by generic blockdev_direct_IO() with enhanced get_block function. The get_data_block() in f2fs handles: 1. if original data blocks are allocates, then give them to blockdev. 2. otherwise, a. preallocate requested block addresses b. do not use extent cache for better performance c. give the block addresses to blockdev This policy induces that: - new allocated data are sequentially written to the disk - updated data are randomly written to the disk. - f2fs gives consistency on its file meta, not file data. Reviewed-by:
-
Jaegeuk Kim authored
This patch introduces new sysfs entries for users to control the policy of in-place-updates, namely IPU, in f2fs. Sometimes f2fs suffers from performance degradation due to its out-of-place update policy that produces many additional node block writes. If the storage performance is very dependant on the amount of data writes instead of IO patterns, we'd better drop this out-of-place update policy. This patch suggests 5 polcies and their triggering conditions as follows. [sysfs entry name = ipu_policy] 0: F2FS_IPU_FORCE all the time, 1: F2FS_IPU_SSR if SSR mode is activated, 2: F2FS_IPU_UTIL if FS utilization is over threashold, 3: F2FS_IPU_SSR_UTIL if SSR mode is activated and FS utilization is over threashold, 4: F2FS_IPU_DISABLE disable IPU. (=default option) [sysfs entry name = min_ipu_util] This parameter controls the threshold to trigger in-place-updates. The number indicates percentage of the filesystem utilization, and used by F2FS_IPU_UTIL and F2FS_IPU_SSR_UTIL policies. For more details, see need_inplace_update() in segment.h. Signed-off-by: -
Changman Lee authored
insmod f2fs.ko is failed after insmod and rmmod firstly. $ sudo insmod fs/f2fs/f2fs.ko insmod: error inserting 'fs/f2fs/f2fs.ko': -1 Cannot allocate memory -- dmesg -- kmem_cache_sanity_check (free_nid): Cache name already exists. Signed-off-by:
Changman Lee <cm224.lee@samsung.com> Signed-off-by:
-
Jaegeuk Kim authored
We need to get a trace before submit_bio, since its bi_sector is remapped during the submit_bio. Signed-off-by: -
Jaegeuk Kim authored
This patch introduces f2fs_io_info to mitigate the complex parameter list. struct f2fs_io_info { enum page_type type; /* contains DATA/NODE/META/META_FLUSH */ int rw; /* contains R/RS/W/WS */ int rw_flag; /* contains REQ_META/REQ_PRIO */ } 1. f2fs_write_data_pages - DATA - WRITE_SYNC is set when wbc->WB_SYNC_ALL. 2. sync_node_pages - NODE - WRITE_SYNC all the time 3. sync_meta_pages - META - WRITE_SYNC all the time - REQ_META | REQ_PRIO all the time ** f2fs_submit_merged_bio() handles META_FLUSH. 4. ra_nat_pages, ra_sit_pages, ra_sum_pages - META - READ_SYNC Cc: Fan Li <fanofcode.li@samsung.com> Cc: Changman Lee <cm224.lee@samsung.com> Signed-off-by: -
Fan Li authored
Previously f2fs submits most of write requests using WRITE_SYNC, but f2fs_write_data_pages submits last write requests by sync_mode flags callers pass. This causes a performance problem since continuous pages with different sync flags can't be merged in cfq IO scheduler(thanks yu chao for pointing it out), and synchronous requests often take more time. This patch makes the following modifies to DATA writebacks: 1. every page will be written back using the sync mode caller pass. 2. only pages with the same sync mode can be merged in one bio request. These changes are restricted to DATA pages.Other types of writebacks are modified To remain synchronous. In my test with tiotest, f2fs sequence write performance is improved by about 7%-10% , and this patch has no obvious impact on other performance tests. Signed-off-by:
Fan Li <fanofcode.li@samsung.com> Signed-off-by:
-
Jaegeuk Kim authored
This patch adds unlikely() macro into the most of codes. The basic rule is to add that when: - checking unusual errors, - checking page mappings, - and the other unlikely conditions. Change log from v1: - Don't add unlikely for the NULL test and error test: advised by Andi Kleen. Cc: Chao Yu <chao2.yu@samsung.com> Cc: Andi Kleen <andi@firstfloor.org> Reviewed-by:
-
Chao Yu authored
As we know, some of our branch condition will rarely be true. So we could add 'unlikely' to let compiler optimize these code, by this way we could drop unneeded 'jump' assemble code to improve performance. change log: o add *unlikely* as many as possible across the whole source files at once suggested by Jaegeuk Kim. Suggested-by:
-
Chao Yu authored
In find_fsync_dnodes() and recover_data(), our flow is like this: ->f2fs_submit_page_bio() -> f2fs_put_page() -> page_cache_release() ---- page->_count declined to zero. ->__free_pages() -> put_page_testzero() ---- page->_count will be declined again. We will get a segment fault in put_page_testzero when CONFIG_DEBUG_VM is on, or return MM with a bad page with wrong _count num. So let's just release this page. Signed-off-by:
-
Chao Yu authored
Use inner macro GFP_F2FS_ZERO to instead of GFP_NOFS | __GFP_ZERO for simplification of code. Signed-off-by:
-
Younger Liu authored
This minor change for the naming conventions of debugfs_root to avoid any possible conflicts to the other filesystem. Signed-off-by:
Younger Liu <younger.liucn@gmail.com> Cc: Younger Liu <younger.liucn@gmail.com> Cc: Jaegeuk Kim <jaegeuk.kim@samsung.com> [Jaegeuk Kim: change the patch name] Signed-off-by:
-
Younger Liu authored
When debugfs_create_file() failed in f2fs_create_root_stats(), debugfs_root should be remove. Signed-off-by:
Younger Liu <liuyiyang@hisense.com> Cc: Younger Liu <younger.liucn@gmail.com> Cc: Jaegeuk Kim <jaegeuk.kim@samsung.com> Reviewed-by:
-
Chao Yu authored
If cp has no CP_UMOUNT_FLAG, we will read all pages in whole node segment one by one, it makes low performance. So let's merge contiguous pages and readahead for better performance. Signed-off-by:
-
Jaegeuk Kim authored
This patch integrates redundant bio operations on read and write IOs. 1. Move bio-related codes to the top of data.c. 2. Replace f2fs_submit_bio with f2fs_submit_merged_bio, which handles read bios additionally. 3. Introduce __submit_merged_bio to submit the merged bio. 4. Change f2fs_readpage to f2fs_submit_page_bio. 5. Introduce f2fs_submit_page_mbio to integrate previous submit_read_page and submit_write_page. Reviewed-by:
-
Jaegeuk Kim authored
Previously f2fs allocates its own bi_private data structure all the time even though we don't use it. But, can we remove this bi_private allocation? This patch removes such the additional bi_private allocation. 1. Retrieve f2fs_sb_info from its page->mapping->host->i_sb. - This removes the usecases of bi_private in end_io. 2. Use bi_private only when we really need it. - The bi_private is used only when the checkpoint procedure is conducted. - When conducting the checkpoint, f2fs submits a META_FLUSH bio to wait its bio completion. - Since we have no dependancies to remove bi_private now, let's just use bi_private pointer as the completion pointer. Reviewed-by:
-
Chao Yu authored
The recover_orphan_inodes() returns no error all the time, so we don't need to check its errors. Signed-off-by:
-
Chao Yu authored
We should return error if we do not get an updated page in find_date_page when f2fs_readpage failed. Signed-off-by:
-
Chao Yu authored
The inode_page_locked should be a boolean variable. struct dnode_of_data { struct inode *inode; /* vfs inode pointer */ struct page *inode_page; /* its inode page, NULL is possible */ struct page *node_page; /* cached direct node page */ nid_t nid; /* node id of the direct node block */ unsigned int ofs_in_node; /* data offset in the node page */ ==> bool inode_page_locked; /* inode page is locked or not */ block_t data_blkaddr; /* block address of the node block */ }; Signed-off-by: -
Chao Yu authored
The void *wait in bio_private is used for waiting completion of checkpoint bio. So we don't need to use its type as void, but declare it as completion type. Signed-off-by:
-
Chao Yu authored
Because we will write node summaries when do_checkpoint with umount flag, our number of max orphan blocks should minus NR_CURSEG_NODE_TYPE additional. Signed-off-by:
-
Chao Yu authored
Because FALLOC_FL_PUNCH_HOLE flag must be ORed with FALLOC_FL_KEEP_SIZE in fallocate, so we could remove the useless 'keep size' branch code which will never be excuted in punch_hole. Signed-off-by:
-
Jaegeuk Kim authored
This patch removes the unnecessary condition checks on: fs/f2fs/gc.c:667 do_garbage_collect() warn: 'sum_page' isn't an ERR_PTR fs/f2fs/f2fs.h:795 f2fs_put_page() warn: 'page' isn't an ERR_PTR Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Jaegeuk Kim authored
This patch fixes some bit overflows by the shift operations. Dan Carpenter reported potential bugs on bit overflows as follows. fs/f2fs/segment.c:910 submit_write_page() warn: should 'blk_addr << ((sbi)->log_blocksize - 9)' be a 64 bit type? fs/f2fs/checkpoint.c:429 get_valid_checkpoint() warn: should '1 << ()' be a 64 bit type? fs/f2fs/data.c:408 f2fs_readpage() warn: should 'blk_addr << ((sbi)->log_blocksize - 9)' be a 64 bit type? fs/f2fs/data.c:457 submit_read_page() warn: should 'blk_addr << ((sbi)->log_blocksize - 9)' be a 64 bit type? fs/f2fs/data.c:525 get_data_block_ro() warn: should 'i << blkbits' be a 64 bit type? Bug-Reported-by:
-
Gu Zheng authored
Fix a potential out of range issue introduced by commit: 22fb72225a f2fs: simplify write_orphan_inodes for better readable Signed-off-by:
-
Jaegeuk Kim authored
Let's remove the unnecessary return value. Signed-off-by: -
Huajun Li authored
Add a mount option: inline_data. If the mount option is set, data of New created small files can be stored in their inode. Signed-off-by:
Huajun Li <huajun.li@intel.com> Signed-off-by:
Haicheng Li <haicheng.li@linux.intel.com> Signed-off-by:
Weihong Xu <weihong.xu@intel.com> Signed-off-by:
-
Huajun Li authored
Add new inode flags F2FS_INLINE_DATA and FI_INLINE_DATA to indicate whether the inode has inline data. Inline data makes use of inode block's data indices region to save small file. Currently there are 923 data indices in an inode block. Since inline xattr has made use of the last 50 indices to save its data, there are 873 indices left which can be used for inline data. When FI_INLINE_DATA is set, the layout of inode block's indices region is like below: +-----------------+ | | Reserved. reserve_new_block() will make use of | i_addr[0] | i_addr[0] when we need to reserve a new data block | | to convert inline data into regular one's. |-----------------| | | Used by inline data. A file whose size is less than | i_addr[1~872] | 3488 bytes(~3.4k) and doesn't reserve extra | | blocks by fallocate() can be saved here. |-----------------| | | | i_addr[873~922] | Reserved for inline xattr | | +-----------------+ Signed-off-by:
-
Changman Lee authored
Let's send REQ_META or REQ_PRIO when reading meta area such as NAT/SIT etc. Signed-off-by:
-
Jaegeuk Kim authored
This patch inserts information of bio types in more detail. So, we can now see REQ_META and REQ_PRIO too. Signed-off-by:
-
