- 04 Apr, 2013 9 commits
-
-
Shawn Guo authored
Move display timing configurations into device tree, so that the auxdata for mxsfb driver can be killed. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
-
Shawn Guo authored
Use videomode helpers to get display timings and configurations from device tree when platform_data is absent. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
-
Shawn Guo authored
There is no in-tree mxsfb users using mxsfb_platform_data dotclk_delay. Let's remove it from mxsfb_platform_data to ease full device tree adoption of mxsfb driver. If later we have platform/board need to configure this parameter, we can add it into device tree bindings. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
-
Shawn Guo authored
There is no in-tree users of mxsfb_platform_data fb_phys/fb_size. With CMA support in the kernel, there is no real need for platform to reserve memory and pass address and size into driver via platform_data. So let's remove fb_phys/fb_size from mxsfb_platform_data to ease full device tree adoption. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
-
Shawn Guo authored
Use devm_* managed functions to make code a little cleaner. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
-
Shawn Guo authored
With fec driver taking care of enet_out clk, most of board setup do not need to enable enet_out clk. So remove them. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
-
Wolfram Sang authored
Put the clock to the devicetree, so the driver can take care of it later. Then, we don't have to do the enabling as a workaround in board init. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> [shawn.guo: add enet_out into imx28.dtsi and overwrite it for m28evk] Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
-
Wolfram Sang authored
Some MX28 boards need the internal enet_out clock to be enabled. So, do this in the driver iff the clock was referenced via devicetree. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: David S. Miller <davem@davemloft.net>
-
Shawn Guo authored
When the optional clk_ptp is absent, we can just set it to NULL, and clk API will just handle it gracefully. It saves us from checking clk_ptp whenever calling into clk API. Also since clk_ptp is optional, the "ret" variable shouldn't be set in case that the clock is absent. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: David S. Miller <davem@davemloft.net>
-
- 03 Apr, 2013 1 commit
-
-
Fabio Estevam authored
Fix the following build error: drivers/clocksource/mxs_timer.c:304:1: error: expected ',' or ';' at end of input Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
-
- 01 Apr, 2013 26 commits
-
-
Shawn Guo authored
Most of the stuff in the headers are used nowhere now. Move a few things that are useful for mach-mxs.c into there and remove the headers. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
-
Shawn Guo authored
Most of the function hooks are same between imx23 and imx28 machine_desc, so merge them into one. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
-
Shawn Guo authored
All three remaining functions declared in common.h are implemented by clock driver. Create header include/linux/clk/mxs.h to contain them and remove common.h. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
-
Shawn Guo authored
All the users of mxs_get_ocotp() are in mach-mxs.c. Move the function into mach-mxs.c, make it a static function, and then remove ocotp.c. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
-
Shawn Guo authored
The static mapping is used nowhere now. Hence mm.c can be removed completely. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
-
Shawn Guo authored
The only user of the static mapping done in mx23_map_io and mx28_map_io is low-level debug now. Use debug_ll_io_init() instead, so that the static mapping is used nowhere and can be removed completely later. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
-
Shawn Guo authored
Instead of using the static definitions, get ocotp base address from device tree with mapping. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
-
Shawn Guo authored
There is no user of function mxs_reset_block() now. Let's move mxs_restart() into mach-mxs.c as a static function and remove system.c completely. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
-
Shawn Guo authored
Instead of using static address definition, get reset address from device tree with mapping, so that core_initcall mxs_arch_reset_init() can be killed. The "rtc" clock code in mxs_arch_reset_init() seems to be zombie, since there is no clk lookup defined in clock driver at all. Remove it together. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
-
Shawn Guo authored
The hardware.h is an empty header and used nowhere now. Remmove it. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
-
Shawn Guo authored
The header <mach/hardware.h> is not needed at all, and <mach/mxs.h> is needed only for macros MXS_SET_ADDR and MXS_CLR_ADDR. Define the macros and remove the mach header inclusions. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
Shawn Guo authored
Headers <mach/mxs.h> and <mach/common.h> are not used in the driver at all. Removed the inclusions. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Jonathan Cameron <jic23@kernel.org>
-
Shawn Guo authored
The function stmp_reset_block() provides the exactly same functionality as mxs_reset_block(). So use stmp_reset_block() instead, so that <mach/common.h> inclusion can be removed. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: rtc-linux@googlegroups.com
-
Shawn Guo authored
It removes the use of mach level IO accessor __mxs_setl/clrl, and hence removes mach header inclusion from clock driver. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Mike Turquette <mturquette@linaro.org>
-
Shawn Guo authored
Instead of using the static definitions, get clkctrl and digctl base addresses with mapping from device tree. Use macro on variable is not nice, but it's done here to save huge pointless diff stat. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Mike Turquette <mturquette@linaro.org>
-
Shawn Guo authored
Remove the unneeded mach-types.h inclusion from mxs.h, which is a leftover from commit 845da6bf (ARM: mxs: detect SoC by checking CHIPID register). Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
-
Shawn Guo authored
Move icoll.c into drivers/irqchip as irq-mxs.c, and along with the renaming, change the driver to use IRQCHIP_DECLARE. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
-
Shawn Guo authored
Call stmp_reset_block() rather than mxs_reset_block(), so that <mach/common.h> inclusion can be removed from icoll driver. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
-
Shawn Guo authored
Rather than using the static definition, it gets icoll base address with mapping from device tree. As the result, <mach/mxs.h> inclusion can be removed from the driver now. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
-
Shawn Guo authored
Move mxs timer driver into drivers/clocksource as mxs_timer.c. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
-
Shawn Guo authored
Select STMP_DEVICE and in timer code replace mxs_reset_block() with stmp_reset_block(), use STMP_OFFSET_REG_SET/CLR to replace __mxs_setl/clrl. As the result, <mach/mxs.h> and <mach/common.h> includsion can be removed from timer.c now. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
-
Shawn Guo authored
Remove cpu_is_mx23() call from timer code by using of_device_is_compatible() instead. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
-
Shawn Guo authored
Instead of using static defines, it gets timrot base address with mapping from device tree. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
-
Shawn Guo authored
Change call clk_get_sys() to of_clk_get() to look up timrot clock from device tree, so that the clk_register_clkdev() call for timrot can be saved in clock driver. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
-
Shawn Guo authored
Select CLKSRC_OF and use clocksource_of_init() to initialize timer, so that the call to mxs_timer_init() in clock driver can be removed. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
-
Shawn Guo authored
-
- 31 Mar, 2013 4 commits
-
-
Linus Torvalds authored
-
git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds authored
Pull slave-dmaengine fixes from Vinod Koul: "Two fixes for slave-dmaengine. The first one is for making slave_id value correct for dw_dmac and the other one fixes the endieness in DT parsing" * 'fixes' of git://git.infradead.org/users/vkoul/slave-dma: dw_dmac: adjust slave_id accordingly to request line base dmaengine: dw_dma: fix endianess for DT xlate function
-
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-mediaLinus Torvalds authored
Pull media fixes from Mauro Carvalho Chehab: "For a some fixes for Kernel 3.9: - subsystem build fix when VIDEO_DEV=y, VIDEO_V4L2=m and I2C=m - compilation fix for arm multiarch preventing IR_RX51 to be selected - regression fix at bttv crop logic - s5p-mfc/m5mols/exynos: a few fixes for cameras on exynos hardware" * 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: [media] [REGRESSION] bt8xx: Fix too large height in cropcap [media] fix compilation with both V4L2 and I2C as 'm' [media] m5mols: Fix bug in stream on handler [media] s5p-fimc: Do not attempt to disable not enabled media pipeline [media] s5p-mfc: Fix encoder control 15 issue [media] s5p-mfc: Fix frame skip bug [media] s5p-fimc: send valid m2m ctx to fimc_m2m_job_finish [media] exynos-gsc: send valid m2m ctx to gsc_m2m_job_finish [media] fimc-lite: Fix the variable type to avoid possible crash [media] fimc-lite: Initialize 'step' field in fimc_lite_ctrl structure [media] ir: IR_RX51 only works on OMAP2
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull block fixes from Jens Axboe: "Alright, this time from 10K up in the air. Collection of fixes that have been queued up since the merge window opened, hence postponed until later in the cycle. The pull request contains: - A bunch of fixes for the xen blk front/back driver. - A round of fixes for the new IBM RamSan driver, fixing various nasty issues. - Fixes for multiple drives from Wei Yongjun, bad handling of return values and wrong pointer math. - A fix for loop properly killing partitions when being detached." * tag 'for-linus-20130331' of git://git.kernel.dk/linux-block: (25 commits) mg_disk: fix error return code in mg_probe() rsxx: remove unused variable rsxx: enable error return of rsxx_eeh_save_issued_dmas() block: removes dynamic allocation on stack Block: blk-flush: Fixed indent code style cciss: fix invalid use of sizeof in cciss_find_cfgtables() loop: cleanup partitions when detaching loop device loop: fix error return code in loop_add() mtip32xx: fix error return code in mtip_pci_probe() xen-blkfront: remove frame list from blk_shadow xen-blkfront: pre-allocate pages for requests xen-blkback: don't store dev_bus_addr xen-blkfront: switch from llist to list xen-blkback: fix foreach_grant_safe to handle empty lists xen-blkfront: replace kmalloc and then memcpy with kmemdup xen-blkback: fix dispatch_rw_block_io() error path rsxx: fix missing unlock on error return in rsxx_eeh_remap_dmas() Adding in EEH support to the IBM FlashSystem 70/80 device driver block: IBM RamSan 70/80 error message bug fix. block: IBM RamSan 70/80 branding changes. ...
-