- 07 Nov, 2019 40 commits
-
-
Rahul Lakkireddy authored
Rework SCHED API to allow offloading TC-MQPRIO QoS configuration. The existing QUEUE based rate limiting throttles all queues sharing a traffic class, to the specified max rate limit value. So, if multiple queues share a traffic class, then all the queues get the aggregate specified max rate limit. So, introduce the new FLOWC based rate limiting, where multiple queues can share a traffic class with each queue getting its own individual specified max rate limit. For example, if 2 queues are bound to class 0, which is rate limited to 1 Gbps, then 2 queues using QUEUE based rate limiting, get the aggregate output of 1 Gbps only. In FLOWC based rate limiting, each queue gets its own output of max 1 Gbps each; i.e. 2 queues * 1 Gbps rate limit = 2 Gbps. Signed-off-by:
Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Rahul Lakkireddy authored
Implement Tx path for traffic flowing through software EOSW_TXQ and EOHW_TXQ. Since multiple EOSW_TXQ can post packets to a single EOHW_TXQ, protect the hardware queue with necessary spinlock. Also, move common code used to generate TSO work request to a common function. Implement Rx path to handle Tx completions for successfully transmitted packets. Signed-off-by:
-
Rahul Lakkireddy authored
Add support for configuring and managing ETHOFLD hardware queues. Keep the queue count and MSI-X allocation scheme same as NIC queues. ETHOFLD hardware queues are dynamically allocated/destroyed as TC-MQPRIO Qdisc offload is enabled/disabled on the corresponding interface, respectively. Signed-off-by:
-
Rahul Lakkireddy authored
Add logic for validation and configuration of TC-MQPRIO Qdisc offload. Also, add support to manage EOSW_TXQ, which have 1-to-1 mapping with EOTIDs, and expose them to network stack. Move common skb validation in Tx path to a separate function and add minimal Tx path for ETHOFLD. Update Tx queue selection to return normal NIC Txq to send traffic pattern that can't go through ETHOFLD Tx path. Signed-off-by:
-
Rahul Lakkireddy authored
Simplify queue configuration and MSI-X allocation logic. Use a single MSI-X information table for both NIC and ULDs. Remove hard-coded MSI-X indices for firmware event queue and non data interrupts. Instead, use the MSI-X bitmap to obtain a free MSI-X index dynamically. Save each Rxq's index into the MSI-X information table, within the Rxq structures themselves, for easier cleanup. Signed-off-by:
-
Rahul Lakkireddy authored
QoS offload needs Ethernet Offload (ETHOFLD) resources present in the NIC. These resources are shared with other ULDs. So, query firmware for the available number of traffic classes, as well as, start and end indices (EOTID) of the ETHOFLD region. Signed-off-by:
-
Eric Dumazet authored
I forgot to change last_packets field in struct net_rate_estimator. Without this fix, rate estimators would misbehave after more than 2^32 packets have been sent. Another solution would be to be careful and only use the 32 least significant bits of packets counters, but we have a hole in net_rate_estimator structure and this looks easier to read/maintain. Fixes: d0083d98 ("net_sched: extend packet counter to 64bit") Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Chenwandun authored
phylink_set_port_modes will be compiled if CONFIG_PHYLINK enabled, dpaa2_mac_validate will be compiled if CONFIG_FSL_DPAA2_ETH enabled, it should select CONFIG_PHYLINK when dpaa2_mac_validate call phylink_set_port_modes drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.o: In function `dpaa2_mac_validate': dpaa2-mac.c:(.text+0x3a1): undefined reference to `phylink_set_port_modes' drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.o: In function `dpaa2_mac_connect': dpaa2-mac.c:(.text+0x91a): undefined reference to `phylink_create' dpaa2-mac.c:(.text+0x94e): undefined reference to `phylink_of_phy_connect' dpaa2-mac.c:(.text+0x97f): undefined reference to `phylink_destroy' drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.o: In function `dpaa2_mac_disconnect': dpaa2-mac.c:(.text+0xa9f): undefined reference to `phylink_disconnect_phy' dpaa2-mac.c:(.text+0xab0): undefined reference to `phylink_destroy' make: *** [vmlinux] Error 1 Fixes: 71947923 ("dpaa2-eth: add MAC/PHY support through phylink") Signed-off-by:
Chenwandun <chenwandun@huawei.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queueDavid S. Miller authored
Jeff Kirsher says: ==================== 100GbE Intel Wired LAN Driver Updates 2019-11-06 This series contains updates to ice driver only. Scott adds ethtool -m support so that we can read eeprom data on SFP/OSFP modules. Anirudh updates the return value to properly reflect when SRIOV is not supported. Md Fahad updates the driver to handle a change in the NVM, where the boot configuration section was moved to the Preserved Field Area (PFA) of the NVM. Paul resolves an issue when DCBx requests non-contiguous TCs, transmit hangs could occur, so configure a default traffic class (TC0) in these cases to prevent traffic hangs. Adds a print statement to notify the user when unsupported modules are inserted. Bruce fixes up the driver unload code flow to ensure we do not clear the interrupt scheme until the reset is complete, otherwise a hardware error may occur. Dave updates the DCB initialization to set is_sw_lldp boolean when the firmware has been detected to be in an untenable state. This will ensure that the firmware is in a known state. Michal saves off the PCI state and I/O BARs address after PCI bus reset so that after the reset, device registers can be read. Also adds a NULL pointer check to prevent a potential kernel panic. Mitch resolves an issue where VF's on PF's other than 0 were not seeing resets by using the per-PF VF ID instead of the absolute VF ID. Krzysztof does some code cleanup to remove a unneeded wrapper and reduces the code complexity. Brett reduces confusion by changing the name of ice_vc_dis_vf() to ice_vc_reset_vf() to better describe what the function is actually doing. v2: dropped patch 3 "ice: Add support for FW recovery mode detection" from the origin al series, while Ani makes changes based on community feedback to implement devlink into the changes. v3: dropped patch 1 "ice: implement set_eeprom functionality" due to a bug found and additional changes will be needed when Ani implements devlink in the driver. ==================== Signed-off-by: -
Andrew Lunn authored
mv88e6xxx_g2_atu_stats_get() takes two parameters. Make the stub function also take two, otherwise we get compile errors. Fixes: c5f299d5 ("net: dsa: mv88e6xxx: global1_atu: Add helper for get next") Signed-off-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
David S. Miller authored
Michael Walle says: ==================== net: phy: at803x device tree binding Adds a device tree binding to configure the clock and the RGMII voltage. Changes since v1: - rebased to latest net-next - renamed "Atheros" to "Qualcomm Atheros" - add a new patch to remove config_init() from AR9331 Changes since the RFC: - renamed the Kconfig entry to "Qualcomm Atheros.." and reordered the item - renamed the prefix from atheros to qca - use the correct name AR803x (instead of AT803x) in new files and dt-bindings. - listed the PHY maintainers in the new schema. Hopefully, thats ok. - fixed a typo in the bindings schema - run dtb_checks and dt_binding_check and fixed the schema - dropped the rgmii-io-1v8 property; instead provide two regulators vddh and vddio, add one consumer vddio-supply - fix the clock settings for the AR8030/AR8035 - only the AR8031 supports chaning the LDO and the PLL mode in software. Check if we have the correct PHY. - new patch to mention the AR8033 which is the same as the AR8031 just without PTP support - new patch which corrects any displayed PHY names and comments. Be consistent. ==================== Signed-off-by: -
Michael Walle authored
According to its datasheet, the internal PHY doesn't have debug registers nor MMDs. Since config_init() only configures delays and clocks and so on in these registers it won't be needed on this PHY. Remove it. Signed-off-by:
Michael Walle <michael@walle.cc> Reviewed-by:
-
Michael Walle authored
Fix at least the displayed strings. The actual name of the chip is AR803x. Signed-off-by:
-
Michael Walle authored
The AR8033 is the AR8031 without PTP support. All other registers are the same. Unfortunately, they share the same PHY ID. Therefore, we cannot distinguish between the one with PTP support and the one without. Signed-off-by:
-
Michael Walle authored
Add support for configuring the CLK_25M pin as well as the RGMII I/O voltage by the device tree. Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Michael Walle authored
Document the Atheros AR803x PHY bindings. Signed-off-by:
Rob Herring <robh@kernel.org> Reviewed-by:
-
Michael Walle authored
The name of the PHY is actually AR803x not AT803x. Additionally, add the name of the vendor and mention the AR8031 support. Signed-off-by:
-
Eric Dumazet authored
Reading tp->recvmsg_inq after socket lock is released raises a KCSAN warning [1] Replace has_tss & has_cmsg by cmsg_flags and make sure to not read tp->recvmsg_inq a second time. [1] BUG: KCSAN: data-race in tcp_chrono_stop / tcp_recvmsg write to 0xffff888126adef24 of 2 bytes by interrupt on cpu 0: tcp_chrono_set net/ipv4/tcp_output.c:2309 [inline] tcp_chrono_stop+0x14c/0x280 net/ipv4/tcp_output.c:2338 tcp_clean_rtx_queue net/ipv4/tcp_input.c:3165 [inline] tcp_ack+0x274f/0x3170 net/ipv4/tcp_input.c:3688 tcp_rcv_established+0x37e/0xf50 net/ipv4/tcp_input.c:5696 tcp_v4_do_rcv+0x381/0x4e0 net/ipv4/tcp_ipv4.c:1561 tcp_v4_rcv+0x19dc/0x1bb0 net/ipv4/tcp_ipv4.c:1942 ip_protocol_deliver_rcu+0x4d/0x420 net/ipv4/ip_input.c:204 ip_local_deliver_finish+0x110/0x140 net/ipv4/ip_input.c:231 NF_HOOK include/linux/netfilter.h:305 [inline] NF_HOOK include/linux/netfilter.h:299 [inline] ip_local_deliver+0x133/0x210 net/ipv4/ip_input.c:252 dst_input include/net/dst.h:442 [inline] ip_rcv_finish+0x121/0x160 net/ipv4/ip_input.c:413 NF_HOOK include/linux/netfilter.h:305 [inline] NF_HOOK include/linux/netfilter.h:299 [inline] ip_rcv+0x18f/0x1a0 net/ipv4/ip_input.c:523 __netif_receive_skb_one_core+0xa7/0xe0 net/core/dev.c:5010 __netif_receive_skb+0x37/0xf0 net/core/dev.c:5124 netif_receive_skb_internal+0x59/0x190 net/core/dev.c:5214 napi_skb_finish net/core/dev.c:5677 [inline] napi_gro_receive+0x28f/0x330 net/core/dev.c:5710 read to 0xffff888126adef25 of 1 bytes by task 7275 on cpu 1: tcp_recvmsg+0x77b/0x1a30 net/ipv4/tcp.c:2187 inet_recvmsg+0xbb/0x250 net/ipv4/af_inet.c:838 sock_recvmsg_nosec net/socket.c:871 [inline] sock_recvmsg net/socket.c:889 [inline] sock_recvmsg+0x92/0xb0 net/socket.c:885 sock_read_iter+0x15f/0x1e0 net/socket.c:967 call_read_iter include/linux/fs.h:1889 [inline] new_sync_read+0x389/0x4f0 fs/read_write.c:414 __vfs_read+0xb1/0xc0 fs/read_write.c:427 vfs_read fs/read_write.c:461 [inline] vfs_read+0x143/0x2c0 fs/read_write.c:446 ksys_read+0xd5/0x1b0 fs/read_write.c:587 __do_sys_read fs/read_write.c:597 [inline] __se_sys_read fs/read_write.c:595 [inline] __x64_sys_read+0x4c/0x60 fs/read_write.c:595 do_syscall_64+0xcc/0x370 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Reported by Kernel Concurrency Sanitizer on: CPU: 1 PID: 7275 Comm: sshd Not tainted 5.4.0-rc3+ #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Fixes: b75eba76 ("tcp: send in-queue bytes in cmsg upon read") Signed-off-by:
Soheil Hassas Yeganeh <soheil@google.com> Reported-by:
syzbot <syzkaller@googlegroups.com> Signed-off-by:
-
Eric Dumazet authored
sk->sk_backlog.tail might be read without holding the socket spinlock, we need to add proper READ_ONCE()/WRITE_ONCE() to silence the warnings. KCSAN reported : BUG: KCSAN: data-race in tcp_add_backlog / tcp_recvmsg write to 0xffff8881265109f8 of 8 bytes by interrupt on cpu 1: __sk_add_backlog include/net/sock.h:907 [inline] sk_add_backlog include/net/sock.h:938 [inline] tcp_add_backlog+0x476/0xce0 net/ipv4/tcp_ipv4.c:1759 tcp_v4_rcv+0x1a70/0x1bd0 net/ipv4/tcp_ipv4.c:1947 ip_protocol_deliver_rcu+0x4d/0x420 net/ipv4/ip_input.c:204 ip_local_deliver_finish+0x110/0x140 net/ipv4/ip_input.c:231 NF_HOOK include/linux/netfilter.h:305 [inline] NF_HOOK include/linux/netfilter.h:299 [inline] ip_local_deliver+0x133/0x210 net/ipv4/ip_input.c:252 dst_input include/net/dst.h:442 [inline] ip_rcv_finish+0x121/0x160 net/ipv4/ip_input.c:413 NF_HOOK include/linux/netfilter.h:305 [inline] NF_HOOK include/linux/netfilter.h:299 [inline] ip_rcv+0x18f/0x1a0 net/ipv4/ip_input.c:523 __netif_receive_skb_one_core+0xa7/0xe0 net/core/dev.c:4929 __netif_receive_skb+0x37/0xf0 net/core/dev.c:5043 netif_receive_skb_internal+0x59/0x190 net/core/dev.c:5133 napi_skb_finish net/core/dev.c:5596 [inline] napi_gro_receive+0x28f/0x330 net/core/dev.c:5629 receive_buf+0x284/0x30b0 drivers/net/virtio_net.c:1061 virtnet_receive drivers/net/virtio_net.c:1323 [inline] virtnet_poll+0x436/0x7d0 drivers/net/virtio_net.c:1428 napi_poll net/core/dev.c:6311 [inline] net_rx_action+0x3ae/0xa90 net/core/dev.c:6379 __do_softirq+0x115/0x33f kernel/softirq.c:292 invoke_softirq kernel/softirq.c:373 [inline] irq_exit+0xbb/0xe0 kernel/softirq.c:413 exiting_irq arch/x86/include/asm/apic.h:536 [inline] do_IRQ+0xa6/0x180 arch/x86/kernel/irq.c:263 ret_from_intr+0x0/0x19 native_safe_halt+0xe/0x10 arch/x86/kernel/paravirt.c:71 arch_cpu_idle+0x1f/0x30 arch/x86/kernel/process.c:571 default_idle_call+0x1e/0x40 kernel/sched/idle.c:94 cpuidle_idle_call kernel/sched/idle.c:154 [inline] do_idle+0x1af/0x280 kernel/sched/idle.c:263 cpu_startup_entry+0x1b/0x20 kernel/sched/idle.c:355 start_secondary+0x208/0x260 arch/x86/kernel/smpboot.c:264 secondary_startup_64+0xa4/0xb0 arch/x86/kernel/head_64.S:241 read to 0xffff8881265109f8 of 8 bytes by task 8057 on cpu 0: tcp_recvmsg+0x46e/0x1b40 net/ipv4/tcp.c:2050 inet_recvmsg+0xbb/0x250 net/ipv4/af_inet.c:838 sock_recvmsg_nosec net/socket.c:871 [inline] sock_recvmsg net/socket.c:889 [inline] sock_recvmsg+0x92/0xb0 net/socket.c:885 sock_read_iter+0x15f/0x1e0 net/socket.c:967 call_read_iter include/linux/fs.h:1889 [inline] new_sync_read+0x389/0x4f0 fs/read_write.c:414 __vfs_read+0xb1/0xc0 fs/read_write.c:427 vfs_read fs/read_write.c:461 [inline] vfs_read+0x143/0x2c0 fs/read_write.c:446 ksys_read+0xd5/0x1b0 fs/read_write.c:587 __do_sys_read fs/read_write.c:597 [inline] __se_sys_read fs/read_write.c:595 [inline] __x64_sys_read+0x4c/0x60 fs/read_write.c:595 do_syscall_64+0xcc/0x370 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Reported by Kernel Concurrency Sanitizer on: CPU: 0 PID: 8057 Comm: syz-fuzzer Not tainted 5.4.0-rc6+ #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Signed-off-by:
-
Ioana Ciornei authored
Convert the phy_mode() function to return the if_mode through an argument, similar to the new form of of_get_phy_mode(). This will help with handling errors in a common manner and also will fix an always true condition. Fixes: 0c65b2b9 ("net: of_get_phy_mode: Change API to solve int/unit warnings") Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by:
-
Tonghao Zhang authored
The commit 69c51582ff786 ("dpif-netlink: don't allocate per thread netlink sockets"), in Open vSwitch ovs-vswitchd, has changed the number of allocated sockets to just one per port by moving the socket array from a per handler structure to a per datapath one. In the kernel datapath, a vport will have only one socket in most case, if so select it directly in fast-path. Signed-off-by:Tonghao Zhang <xiangxia.m.yue@gmail.com> Acked-by:
Pravin B Shelar <pshelar@ovn.org> Signed-off-by:
-
Wei Yongjun authored
In the DMA memory resource get failed case, the error is not set and 0 will be returned. Fix it by removing redundant check since devm_ioremap_resource() will handle it. Fixes: 28ef9ebd ("net: axienet: make use of axistream-connected attribute optional") Signed-off-by:
Wei Yongjun <weiyongjun1@huawei.com> Reviewed-by:
Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com> Signed-off-by:
-
Wei Yongjun authored
Function ptp_clock_register() returns ERR_PTR() and never returns NULL. The NULL test should be removed. Signed-off-by:
Igor Russkikh <irusskikh@marvell.com> Signed-off-by:
-
Wei Yongjun authored
Add the missing unlock before return from function idtcm_probe() in the error handling case. Fixes: 3a6ba7dc ("ptp: Add a ptp clock driver for IDT ClockMatrix.") Signed-off-by:
Vincent Cheng <vincent.cheng.xh@renesas.com> Signed-off-by:
-
Tuong Lien authored
When preparing tunnel packets for the link failover or synchronization, as for the safe algorithm, we added a dummy packet on the pair link but never sent it out. In the case of failover, the pair link will be reset anyway. But for link synching, it will always result in retransmission of the dummy packet after that. We have also observed that such the retransmission at the early stage when a new node comes in a large cluster will take some time and hard to be done, leading to the repeated retransmit failures and the link is reset. Since in commit 4929a932 ("tipc: optimize link synching mechanism") we have already built a dummy 'TUNNEL_PROTOCOL' message on the new link for the synchronization, there's no need for the dummy on the pair one, this commit will skip it when the new mechanism takes in place. In case nothing exists in the pair link's transmq, the link synching will just start and stop shortly on the peer side. The patch is backward compatible. Acked-by:
Jon Maloy <jon.maloy@ericsson.com> Tested-by:
Hoang Le <hoang.h.le@dektech.com.au> Signed-off-by:
Tuong Lien <tuong.t.lien@dektech.com.au> Signed-off-by:
-
David S. Miller authored
Xin Long says: ==================== lwtunnel: add ip and ip6 options setting and dumping With this patchset, users can configure options by ip route encap for geneve, vxlan and ersapn lwtunnel, like: # ip r a 1.1.1.0/24 encap ip id 1 geneve class 0 type 0 \ data "1212121234567890" dst 10.1.0.2 dev geneve1 # ip r a 1.1.1.0/24 encap ip id 1 vxlan gbp 456 \ dst 10.1.0.2 dev erspan1 # ip r a 1.1.1.0/24 encap ip id 1 erspan ver 1 idx 123 \ dst 10.1.0.2 dev erspan1 iproute side patch is attached on the reply of this mail. ==================== Signed-off-by: -
Xin Long authored
Based on the code framework built on the last patch, to support setting and dumping for vxlan, we only need to add ip_tun_parse_opts_erspan() for .build_state and ip_tun_fill_encap_opts_erspan() for .fill_encap and if (tun_flags & TUNNEL_ERSPAN_OPT) for .get_encap_size. Signed-off-by:
Xin Long <lucien.xin@gmail.com> Signed-off-by:
-
Xin Long authored
Based on the code framework built on the last patch, to support setting and dumping for vxlan, we only need to add ip_tun_parse_opts_vxlan() for .build_state and ip_tun_fill_encap_opts_vxlan() for .fill_encap and if (tun_flags & TUNNEL_VXLAN_OPT) for .get_encap_size. Signed-off-by:
-
Xin Long authored
To add options setting and dumping, .build_state(), .fill_encap() and .get_encap_size() in ip_tun_lwt_ops needs to be extended: ip_tun_build_state(): ip_tun_parse_opts(): ip_tun_parse_opts_geneve() ip_tun_fill_encap_info(): ip_tun_fill_encap_opts(): ip_tun_fill_encap_opts_geneve() ip_tun_encap_nlsize() ip_tun_opts_nlsize(): if (tun_flags & TUNNEL_GENEVE_OPT) ip_tun_parse_opts(), ip_tun_fill_encap_opts() and ip_tun_opts_nlsize() processes LWTUNNEL_IP_OPTS. ip_tun_parse_opts_geneve(), ip_tun_fill_encap_opts_geneve() and if (tun_flags & TUNNEL_GENEVE_OPT) processes LWTUNNEL_IP_OPTS_GENEVE. Signed-off-by: -
Xin Long authored
When comparing two tun_info, dst_cache member should have been skipped, as dst_cache is a per cpu pointer and they are always different values even in two tun_info with the same keys. So this patch is to skip dst_cache member and compare the key, mode and options_len only. For the future opts setting support, also to compare options. Fixes: 2d798499 ("lwtunnel: ip tunnel: fix multiple routes with different encap") Signed-off-by:
-
Xin Long authored
Without options copied to the dst tun_info in iptunnel_metadata_reply() called by arp_process for handling arp_request, the generated arp_reply packet may be dropped or sent out with wrong options for some tunnels like erspan and vxlan, and the traffic will break. Fixes: 63d008a4 ("ipv4: send arp replies to the correct tunnel") Signed-off-by:
-
Hoang Le authored
With huge cluster (e.g >200nodes), the amount of that flow: gap -> retransmit packet -> acked will take time in case of STATE_MSG dropped/delayed because a lot of traffic. This lead to 1.5 sec tolerance value criteria made link easy failure around 2nd, 3rd of failed retransmission attempts. Instead of re-introduced criteria of 99 faled retransmissions to fix the issue, we increase failure detection timer to ten times tolerance value. Fixes: 77cf8edb ("tipc: simplify stale link failure criteria") Acked-by:
-
Hoang Le authored
There are two improvements when re-calculate cluster capabilities: - When deleting a specific down node, need to re-calculate. - In tipc_node_cleanup(), do not need to re-calculate if node is still existing in cluster. Acked-by:
-
Francesco Ruggeri authored
Added the following traceroute tests. IPV6: Verify that in this scenario ------------------------ N2 | | ------ ------ N3 ---- | R1 | | R2 |------|H2| ------ ------ ---- | | ------------------------ N1 | ---- |H1| ---- where H1's default route goes through R1 and R1's default route goes through R2 over N2, traceroute6 from H1 to H2 reports R2's address on N2 and not N1. IPV4: Verify that traceroute from H1 to H2 shows 1.0.1.1 in this scenario 1.0.3.1/24 ---- 1.0.1.3/24 1.0.1.1/24 ---- 1.0.2.1/24 1.0.2.4/24 ---- |H1|--------------------------|R1|--------------------------|H2| ---- N1 ---- N2 ---- where net.ipv4.icmp_errors_use_inbound_ifaddr is set on R1 and 1.0.3.1/24 and 1.0.1.1/24 are respectively R1's primary and secondary address on N1. v2: fixed some typos, and have bridge in R1 instead of R2 in IPV6 test. Signed-off-by:Francesco Ruggeri <fruggeri@arista.com> Reviewed-by:
David Ahern <dsahern@gmail.com> Signed-off-by:
-
Anirudh Venkataramanan authored
When the device is not capable of supporting SR-IOV -ENODEV is being returned; -EOPNOTSUPP is more appropriate. Signed-off-by:
Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by:
Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Brett Creeley authored
ice_vc_dis_vf() tells iavf that it's going to perform a reset and then performs a software reset. This is misleading based on the function name because the VF does not get disabled. So fix this by changing the name to ice_vc_reset_vf(). Signed-off-by:
Brett Creeley <brett.creeley@intel.com> Tested-by:
-
Krzysztof Kazimierczak authored
ice_cleanup_hdrs() has been stripped of most of its content, it only serves as a wrapper for eth_skb_pad(). We can get rid of it altogether and simplify the codebase. Signed-off-by:
Krzysztof Kazimierczak <krzysztof.kazimierczak@intel.com> Tested-by:
-
Paul Greenwalt authored
Print message to inform user of PCI link speed and width. Signed-off-by:
Paul Greenwalt <paul.greenwalt@intel.com> Tested-by:
-
Paul Greenwalt authored
Print message to inform user if unsupported module is inserted, and extend the topology / configuration detection. Signed-off-by:
-
Mitch Williams authored
The VF_MBX_ARQLEN register array is per-PF, not global, so we should not use the absolute VF ID as an index. Instead, use the per-PF VF ID. This fixes an issue with VFs on PFs other than 0 not seeing reset. Signed-off-by:
Mitch Williams <mitch.a.williams@intel.com> Tested-by:
-
