- 22 May, 2014 2 commits
-
-
Ville Syrjälä authored
Document the internal structure of the VLV display PHY a bit to help people understand how the different register blocks relate to each other. v2: Add a bit more text Make it a DOC: comment, but leave the ascii art out since it would get mangled Signed-off-by:Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
Chon Ming Lee <chon.ming.lee@intel.com> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch>
-
Mika Kuoppala authored
for proper refcounting to take place as we use i915_add_request() for it. i915_add_request() also takes the context for the request from ring->last_context so move the null state batch submission after the ring context has been set. v2: we need to check for correct ring now (Ville Syrjälä) v3: no need to expose i915_gem_move_object_to_active (Chris Wilson) v4: cargoculted vma/active/inactive error handling removed (Chris Wilson) Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by:
Mika Kuoppala <mika.kuoppala@intel.com> Reviewed-by:
Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
-
- 21 May, 2014 14 commits
-
-
Ville Syrjälä authored
If a pipe is already active when we init/resume there might not be a full modeset afterwards so drm_vblank_on() may not get called. In such a case if someone is holding a vblank reference across a suspend/resume cycle drm_vblank_get() called after resuming won't re-enable the vblank interrupts. So in order to make sure vblank interrupts get re-enabled post-resume, call drm_vblank_on() in intel_sanitize_crtc() if the crtc is already active. v2: Also drm_vblank_off() if the pipe got disabled magically Signed-off-by:
-
Daniel Vetter authored
Pull in the drm vblank rework from Ville and me. drm core parts acked by Dave Airlie Conflicts: drivers/gpu/drm/i915/intel_display.c Just a bit of fun around the placement of drm_vblank_on. This merge resolution has been tested in drm-intel-nightly for a while already. Acked-by:
Dave Airlie <airlied@gmail.com> Signed-off-by:
-
Daniel Vetter authored
We don't have hardware based disable bits on gmch platforms, so need to block spurious underrun reports in software. Which means that we _must_ start out with fifo underrun reporting disabled everywhere. This is in big contrast to ilk/hsw/cpt where there's only _one_ disable bit for all platforms and hence we must allow underrun reporting on disabled pipes. Otherwise nothing really works, especially the CRC support since that's key'ed off the same irq disable bit. This allows us to ditch the fifo underrun reporting hack from the vlv runtime pm code and unexport the internal function from i915_irq.c again. Yay! v2: Keep the display irq disabling, spotted by Imre. Cc: Imre Deak <imre.deak@intel.com> Reviewed-by:
-
Daniel Vetter authored
Now that we unconditionally dtrt when disabling/enabling crtcs we don't need any hacks any longer to keep the vblank logic sane when all the registers go poof. So let's rip it all out. This essentially undoes commit 9dbd8feb Author: Paulo Zanoni <paulo.r.zanoni@intel.com> Date: Tue Jul 23 10:48:11 2013 -0300 drm/i915: update last_vblank when disabling the power well Apparently igt/kms_flip is already powerful enough to exercise this properly, yay! See the reference regression report for details. v2: Update testcase name References: https://bugs.freedesktop.org/show_bug.cgi?id=66808 Testcase: igt/kms_flip/vblank-vs-*-rpm Reviewed-by:
-
Daniel Vetter authored
Only the low-level irq handling functions still use integer crtc indices with this. But fixing that will require a lot more sugery and some good ideas for backwards compat with old ums userspace. Both in drivers and in the drm core. Reviewed-by:
-
Daniel Vetter authored
We need to start somewhere ... With this the only places left in i915 where we use pipe integers is in the interrupt handling code. And there it actually makes some amount of sense. v2: - Polish kerneldoc a bit (Thierry). - Drop "dev" parameter since it's unecessary. - Split out i915 changes (Thierry). Cc: Thierry Reding <thierry.reding@gmail.com> Reviewed-by:
-
Daniel Vetter authored
- Integrate into the drm DocBook - Disable kerneldoc for functions not exported to drivers. - Properly document the new drm_vblank_on|off and add cautious comments explaining when drm_vblank_pre|post_modesets shouldn't be used. - General polish and OCD. v2: Polish as suggested by Thierry. Cc: Thierry Reding <thierry.reding@gmail.com> Reviewed-by:
-
Daniel Vetter authored
Leftover from the old days of ums and should be used any longer. Since commit 29935554 Author: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Date: Wed May 30 00:58:09 2012 +0200 drm: Disallow DRM_IOCTL_MODESET_CTL for KMS drivers it is a complete no-Op for kms drivers. v2: Fix up mangled sentence spotted by Michel. Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Michel Dänzer <michel@daenzer.net> Reviewed-by:
-
Daniel Vetter authored
Originally these functions have been for user modesetting drivers to ensure vblank processing doesn't fall over completely around modeset changes. This has been carried over ever since then. Now that Ville cleaned our vblank handling with an explicit drm_vblank_off/on braket when disabling/enabling crtcs. So this seems to be unnecessary now. The most important side effect was that due to the delayed vblank disabling we have been pretty much guaranteed to receive a vblank interrupt soonish after a crtc was enabled. Note that our vblank handling across modeset is still fairly decent fubar - we don't actually handle vblank counter all to well. drm_update_vblank_count will make sure that the frame counter always rolls forward, but userspace isn't really all to ready to cope with the big jumps this causes. This isn't a big mostly because the hardware retains the frame counter. But with runtime pm and also across suspend/resume we fall over. Fixing this is a lot more involved and also needs som i-g-ts. So material for another patch series. Reviewed-by:
-
Ville Syrjälä authored
All of the .queue_flip() callbacks duplicate the same code to pin the buffers and calculate the gtt_offset. Move that code to intel_crtc_page_flip(). In order to do that we must also move the ring selection logic there. Signed-off-by:
-
Ville Syrjälä authored
Now that we've plugged the mmio vs. ring flip race, we shouldn't need these vblank waits in the modeset codepaths anymore. So get rid of them. v2: gen2 needs to wait for planes to turn off before disabling pipe Signed-off-by:
Rodrigo Vivi <rodrigo.vivi@gmail.com> Signed-off-by:
-
Ville Syrjälä authored
Now that the vblank wait is gone from intel_enable_primary_plane(), hsw_enable_ips() needs to do the vblank wait itself. Signed-off-by:
-
Ville Syrjälä authored
Starting from ILK, mmio flips also cause a flip done interrupt to be signalled. This means if we first do a set_base and follow it immediately with the CS flip, we might mistake the flip done interrupt caused by the set_base as the flip done interrupt caused by the CS flip. The hardware has a flip counter which increments every time a mmio or CS flip is issued. It basically counts the number of DSPSURF register writes. This means we can sample the counter before we put the CS flip into the ring, and then when we get a flip done interrupt we can check whether the CS flip has actually performed the surface address update, or if the interrupt was caused by a previous but yet unfinished mmio flip. Even with the flip counter we still have a race condition of the CS flip base address update happens after the mmio flip done interrupt was raised but not yet processed by the driver. When the interrupt is eventually processed, the flip counter will already indicate that the CS flip has been executed, but it would not actually complete until the next start of vblank. We can use the DSPSURFLIVE register to check whether the hardware is actually scanning out of the buffer we expect, or if we managed hit this race window. This covers all the cases where the CS flip actually changes the base address. If the base address remains unchanged, we might still complete the CS flip before it has actually completed. But since the address didn't change anyway, the premature flip completion can't result in userspace overwriting data that's still being scanned out. CTG already has the flip counter and DSPSURFLIVE registers, and although the flip done interrupt is still limited to CS flips alone, the code now also checks the flip counter on CTG as well. v2: s/dspsurf/gtt_offset/ (Chris) Testcase: igt/kms_mmio_vs_cs_flip/setcrtc_vs_cs_flip Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=73027Signed-off-by:
-
Jesse Barnes authored
We really just want to go detect displays again and fire off a hotplug event if things have changed, not go through full hotplug processing. Requested-by:
Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by:
-
- 20 May, 2014 24 commits
-
-
Daniel Vetter authored
Since commit 2e82a720 Author: Imre Deak <imre.deak@intel.com> Date: Fri Jan 17 15:46:43 2014 +0200 drm/i915: don't disable DP port after a failed link training and commit 5d6a1116 Author: Imre Deak <imre.deak@intel.com> Date: Thu Jan 16 18:35:57 2014 +0200 drm/i915: don't disable the DP port if the link is lost we no longer call intel_dp_link_down from generic DP code, but only from the !HAS_DDI dp encoder functions. hsw/bdw have their own encoder disabling callback in intel_ddi.c. Hence the early return is no longer needed and the big comment just confusing, so let's rip it out. To ensure what we don't accidentally use this again on ddi encoders add a WARN_ON instead. Spotted while reading through intel_dp.c Cc: Imre Deak <imre.deak@intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by:
-
Ville Syrjälä authored
drm_vblank_off() will turn off vblank interrupts, but as long as the refcount is elevated drm_vblank_get() will not re-enable them. This is a problem is someone is holding a vblank reference while a modeset is happening, and the driver requires vblank interrupt to work during that time. Add drm_vblank_on() as a counterpart to drm_vblank_off() which will re-enabled vblank interrupts if the refcount is already elevated. This will allow drivers to choose the specific places in the modeset sequence at which vblank interrupts get disabled and enabled. Testcase: igt/kms_flip/*-vs-suspend Signed-off-by:
-
Ville Syrjälä authored
If there's a blocking vblank wait in progress while the vblank interrupt gets disabled, the current code will just let the vblank wait time out. Instead make it return immediately when vblank interrupts get disabled. Signed-off-by:
-
Ville Syrjälä authored
Currently there's one per-device vblank disable timer, and it gets reset wheneven the vblank refcount for any crtc drops to zero. That means that one crtc could accidentally be keeping the vblank interrupts for other crtcs enabled even if there are no users for them. Make the disable timer per-crtc to avoid this issue. Signed-off-by:
-
Peter Hurley authored
The irq flags state is already established by the outer spin_lock_irqsave(); re-disabling irqs is redundant. Signed-off-by:
Peter Hurley <peter@hurleysoftware.com> Signed-off-by:
-
Jani Nikula authored
Somehow a few functions have been dropped in the middle of backlight code. Move them around. No functional changes. Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Reviewed-by:
-
Ville Syrjälä authored
Clear the reset domain after a succesful GPU reset on ilk. We already do that on gen4, so let's try to be a bit more consistent. And if ether render or media reset fails, we might use the leftover value in the register to pinpoint the culprit. Signed-off-by:
-
Ville Syrjälä authored
All the other bits in the GDSR register are read-only, so we don't have to preserve them when we perform a GPU reset. Signed-off-by:
-
Imre Deak authored
I'm trying to reduce the WARNs during driver reload and this was one of them. Also while at it remove the redundant condition from before unregister_shrinker(). v2: - fix the error path too and move the unregister to its logical place (Chris) - remove redundant condition from before unregister_shrinker() Signed-off-by:
Imre Deak <imre.deak@intel.com> Reviewed-by:
-
Ville Syrjälä authored
The comments in i915_reg.h aren't proper kernel-doc comments, so replace the magic /** with just /* Signed-off-by:
Damien Lespiau <damien.lespiau@intel.com> Signed-off-by:
-
Ville Syrjälä authored
The following workarounds should be needed for pre-production hardware only: * WaDisablePwrmtrEvent:chv * WaSetMaskForGfxBusyness:chv * WaDisableGunitClockGating:chv * WaDisableFfDopClockGating:chv * WaDisableDopClockGating:chv Signed-off-by:
-
Ville Syrjälä authored
The spec only tells us to set individual bits here and there. So we use RMW for most things. Do the same for the swing calc init. Eventually we should optimize things to just blast the final value in with group access whenever possible. But to do that someone needs to take a good look at what's the reset value for each registers, and possibly if the BIOS manages to frob with some of them. For now use RMW access always. Signed-off-by:
-
Ville Syrjälä authored
Like PCS, TX group reads return 0xffffffff. So we need to target each lane separately if we want to use RMW cycles to update the registers. Signed-off-by:
-
Ville Syrjälä authored
All PCS groups access reads return 0xffffffff, so we can't use group access for RMW cycles. Instead target each spline separately. Signed-off-by:
-
Ville Syrjälä authored
The bits we've been setting so far only progagate the reset singal to the data lanes. To actaully force the reset signal we need to set another override bit. v2: Fix mispalced ';' (Mika) Reviewed-by:
-
Ville Syrjälä authored
Seems like we shouldn't leave the data lane resert deasserted when the port if disabled. So propagate the reset the data lanes in the encoder .post_disable() hook. Signed-off-by:
-
Ville Syrjälä authored
During the enable sequence we first enable the dclkp output to the display controller, and then enable the PLL. Do the opposite during the disable sequence. Signed-off-by:
-
Ville Syrjälä authored
We need to pick the correct data lanes based on the port not the pipe, so move the data lane deassert into the encoder .pre_enable() hook from the chv_enable_pll(). Signed-off-by:
-
Ville Syrjälä authored
Setup the pipe config dpll state correctly for CHV. Also add a assert_pipe_disabled() to chv_disable_pll(), and program the DPLL_MD registers in chv_enable_pll(). Signed-off-by:
-
Ville Syrjälä authored
Signed-off-by:
Antti Koskipää <antti.koskipaa@linux.intel.com> Signed-off-by:
-
Ville Syrjälä authored
Fix the encoder .get_config hooks to report the correct active pipe for CHV. Signed-off-by:
-
Ville Syrjälä authored
CHV has three pipes so let's expose them all. Signed-off-by:
-
Ville Syrjälä authored
Unsurprisingly the cursor C regiters are also at a weird offset on CHV. Add more pipe offsets to handle them. This also gets rid of most of the differences between the i9xx vs. ivb cursor code. We can unify the remaining code as well, but I'll leave that for another patch. Signed-off-by:
-
Ville Syrjälä authored
On CHV the GMBUS port for port D is different from other gmch platforms which have port D. Fix it up. Signed-off-by:
-
