commit c667186f upstream.

Our 32bit CP14/15 handling inherited some of the ARMv7 code for handling
the trapped system registers, completely missing the fact that the
fields for Rt and Rt2 are now 5 bit wide, and not 4...

Let's fix it, and provide an accessor for the most common Rt case.
Reviewed-by: Christoffer Dall <cdall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <cdall@linaro.org>
[bwh: Backported to 3.16:
 - Use literal numbers in kvm_vcpu_sys_get_rt()
 - Adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

commit 1b0fb5a5 upstream.

__get_memory_limit() tests if dm_bufio_cache_size changed and calls
__cache_size_refresh() if it did.  It takes dm_bufio_clients_lock while
it already holds the client lock.  However, lock ordering is violated
because in cleanup_old_buffers() dm_bufio_clients_lock is taken before
the client lock.

This results in a possible deadlock and lockdep engine warning.

Fix this deadlock by changing mutex_lock() to mutex_trylock().  If the
lock can't be taken, it will be re-checked next time when a new buffer
is allocated.

Also add "unlikely" to the if condition, so that the optimizer assumes
that the condition is false.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

commit 5b8481fa upstream.

Since that change also made the nfrag function not necessary
for exports, remove it.

Fixes: 89a23c8b ("ip6_tunnel: Fix missing tunnel encapsulation limit option")
Signed-off-by: David S. Miller <davem@davemloft.net>
[bwh: Backported to 3.16: keep exporting ipv6_push_nfrag_opts(), needed by
 ip6_gre module]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

commit 89a23c8b upstream.

The IPv6 tunneling code tries to insert IPV6_TLV_TNL_ENCAP_LIMIT and
IPV6_TLV_PADN options when an encapsulation limit is defined (the
default is a limit of 4).  An MTU adjustment is done to account for
these options as well.  However, the options are never present in the
generated packets.

The issue appears to be a subtlety between IPV6_DSTOPTS and
IPV6_RTHDRDSTOPTS defined in RFC 3542.  When the IPIP tunnel driver was
written, the encap limit options were included as IPV6_RTHDRDSTOPTS in
dst0opt of struct ipv6_txoptions.  Later, ipv6_push_nfrags_opts was
(correctly) updated to require IPV6_RTHDR options when IPV6_RTHDRDSTOPTS
are to be used.  This caused the options to no longer be included in v6
encapsulated packets.

The fix is to use IPV6_DSTOPTS (in dst1opt of struct ipv6_txoptions)
instead.  IPV6_DSTOPTS do not have the additional IPV6_RTHDR requirement.

Fixes: 1df64a85: ("[IPV6]: Add ip6ip6 tunnel driver.")
Fixes: 333fad53: ("[IPV6]: Support several new sockopt / ancillary data in Advanced API (RFC3542)")
Signed-off-by: Craig Gallek <kraig@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
[bwh: Backported to 3.16: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

commit 3071e9dd upstream.

The interrupt should be requested for the platform device
and not for the input device.

Fixes: 7f9ce649 ("Input: twl4030-pwrbutton - simplify driver using devm_*")
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
[bwh: Backported to 3.16: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

commit 633e8799 upstream.

This changed is needed to avoid locking problem during
boot as shown:

<5>[    8.824096] Registering SWP/SWPB emulation handler
<6>[    8.977294] clock: disabling unused clocks to save power
<3>[    9.108154] BUG: sleeping function called from invalid context at kernel_albert/kernel/mutex.c:269
<3>[    9.122894] in_atomic(): 1, irqs_disabled(): 0, pid: 1, name: swapper/0
<4>[    9.130249] 3 locks held by swapper/0/1:
<4>[    9.134613]  #0:  (&__lockdep_no_validate__){......}, at: [<c0342430>] __driver_attach+0x58/0xa8
<4>[    9.144500]  #1:  (&__lockdep_no_validate__){......}, at: [<c0342440>] __driver_attach+0x68/0xa8
<4>[    9.154357]  #2:  (&polling_timer){......}, at: [<c0053770>] run_timer_softirq+0x108/0x3ec
<4>[    9.163726] Backtrace:
<4>[    9.166473] [<c001269c>] (dump_backtrace+0x0/0x114) from [<c067e5f0>] (dump_stack+0x20/0x24)
<4>[    9.175811]  r6:00203230 r5:0000010d r4:d782e000 r3:60000113
<4>[    9.182250] [<c067e5d0>] (dump_stack+0x0/0x24) from [<c007441c>] (__might_sleep+0x10c/0x128)
<4>[    9.191650] [<c0074310>] (__might_sleep+0x0/0x128) from [<c0688f60>] (mutex_lock_nested+0x34/0x36c)
<4>[    9.201660]  r5:c02d5350 r4:d79a0c64
<4>[    9.205688] [<c0688f2c>] (mutex_lock_nested+0x0/0x36c) from [<c02d5350>] (regulator_set_current_limit+0x30/0x118)
<4>[    9.217071] [<c02d5320>] (regulator_set_current_limit+0x0/0x118) from [<c0435ce0>] (update_charger+0x84/0xc4)
<4>[    9.228027]  r7:d782fb20 r6:00000101 r5:c1767e94 r4:00000000
<4>[    9.234436] [<c0435c5c>] (update_charger+0x0/0xc4) from [<c0435d40>] (psy_changed+0x20/0x48)
<4>[    9.243804]  r5:d782e000 r4:c1767e94
<4>[    9.247802] [<c0435d20>] (psy_changed+0x0/0x48) from [<c0435dec>] (polling_timer_func+0x84/0xb8)
<4>[    9.257537]  r4:c1767e94 r3:00000002
<4>[    9.261566] [<c0435d68>] (polling_timer_func+0x0/0xb8) from [<c00537e4>] (run_timer_softirq+0x17c/0x3ec)
<4>[    9.272033]  r4:c1767eb0 r3:00000000
<4>[    9.276062] [<c0053668>] (run_timer_softirq+0x0/0x3ec) from [<c004b000>] (__do_softirq+0xf0/0x298)
<4>[    9.286010] [<c004af10>] (__do_softirq+0x0/0x298) from [<c004b650>] (irq_exit+0x98/0xa0)
<4>[    9.295013] [<c004b5b8>] (irq_exit+0x0/0xa0) from [<c000edbc>] (handle_IRQ+0x60/0xc0)
<4>[    9.303680]  r4:c1194e98 r3:c00bc778
<4>[    9.307708] [<c000ed5c>] (handle_IRQ+0x0/0xc0) from [<c0008504>] (gic_handle_irq+0x34/0x68)
<4>[    9.316955]  r8:000ac383 r7:d782fc3c r6:d782fc08 r5:c11936c4 r4:e0802100
<4>[    9.324310] r3:c026ba48
<4>[    9.327301] [<c00084d0>] (gic_handle_irq+0x0/0x68) from [<c068c2c0>] (__irq_svc+0x40/0x74)
<4>[    9.336456] Exception stack(0xd782fc08 to 0xd782fc50)
<4>[    9.342041] fc00:                   d6e30e6c ac383627 00000000 ac383417 ea19c000 ea200000
<4>[    9.351104] fc20: beffffff 00000667 000ac383 d6e30670 d6e3066c d782fc94 d782fbe8 d782fc50
<4>[    9.360168] fc40: c026ba48 c001d1f0 00000113 ffffffff

Fixes: b2998049 ("[BATTERY] pda_power platform driver")
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Anthony Brandon <anthony@amarulasolutions.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
[bwh: Backported to 3.16: adjust filename]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

commit 8b208399 upstream.

Function devm_kzalloc() will return a NULL pointer. However, in function
isp1704_charger_probe(), the return value of devm_kzalloc() is directly
used without validation. This may result in a bad memory access bug.

Fixes: 34a10961 ("isp1704_charger: Add DT support")
Signed-off-by: Pan Bian <bianpan2016@163.com>
Reviewed-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
[bwh: Backported to 3.16: adjust filename]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

commit ab89f0bd upstream.

Running 32bit userspace on 64bit kernel results in MSG_CMSG_COMPAT being
defined as 0x80000000. This results in sendmsg failure if used from 32bit
userspace running on 64bit kernel. Fix this by accounting for MSG_CMSG_COMPAT
in flags check in hci_sock_sendmsg.
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
Signed-off-by: Marko Kiiskila <marko@runtime.io>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

commit 8b8642af upstream.

Since commit 5093bb96 ("powerpc/QE: switch to the cpm_muram
implementation"), muram area is not part of immrbar mapping anymore
so immrbar_virt_to_phys() is not usable anymore.

Fixes: 5093bb96 ("powerpc/QE: switch to the cpm_muram implementation")
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Acked-by: David S. Miller <davem@davemloft.net>
Acked-by: Li Yang <pku.leo@gmail.com>
Signed-off-by: Scott Wood <oss@buserror.net>
[bwh: Backported to 3.16: adjust filename]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

commit 7b4cc978 upstream.

Currently the case of writing via mmap to a file with inline data is not
handled.  This is maybe a rare case since it requires a writable memory
map of a very small file, but it is trivial to trigger with on
inline_data filesystem, and it causes the
'BUG_ON(ext4_test_inode_state(inode, EXT4_STATE_MAY_INLINE_DATA));' in
ext4_writepages() to be hit:

    mkfs.ext4 -O inline_data /dev/vdb
    mount /dev/vdb /mnt
    xfs_io -f /mnt/file \
	-c 'pwrite 0 1' \
	-c 'mmap -w 0 1m' \
	-c 'mwrite 0 1' \
	-c 'fsync'

	kernel BUG at fs/ext4/inode.c:2723!
	invalid opcode: 0000 [#1] SMP
	CPU: 1 PID: 2532 Comm: xfs_io Not tainted 4.11.0-rc1-xfstests-00301-g071d9acf3d1f #633
	Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-20170228_101828-anatol 04/01/2014
	task: ffff88003d3a8040 task.stack: ffffc90000300000
	RIP: 0010:ext4_writepages+0xc89/0xf8a
	RSP: 0018:ffffc90000303ca0 EFLAGS: 00010283
	RAX: 0000028410000000 RBX: ffff8800383fa3b0 RCX: ffffffff812afcdc
	RDX: 00000a9d00000246 RSI: ffffffff81e660e0 RDI: 0000000000000246
	RBP: ffffc90000303dc0 R08: 0000000000000002 R09: 869618e8f99b4fa5
	R10: 00000000852287a2 R11: 00000000a03b49f4 R12: ffff88003808e698
	R13: 0000000000000000 R14: 7fffffffffffffff R15: 7fffffffffffffff
	FS:  00007fd3e53094c0(0000) GS:ffff88003e400000(0000) knlGS:0000000000000000
	CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
	CR2: 00007fd3e4c51000 CR3: 000000003d554000 CR4: 00000000003406e0
	Call Trace:
	 ? _raw_spin_unlock+0x27/0x2a
	 ? kvm_clock_read+0x1e/0x20
	 do_writepages+0x23/0x2c
	 ? do_writepages+0x23/0x2c
	 __filemap_fdatawrite_range+0x80/0x87
	 filemap_write_and_wait_range+0x67/0x8c
	 ext4_sync_file+0x20e/0x472
	 vfs_fsync_range+0x8e/0x9f
	 ? syscall_trace_enter+0x25b/0x2d0
	 vfs_fsync+0x1c/0x1e
	 do_fsync+0x31/0x4a
	 SyS_fsync+0x10/0x14
	 do_syscall_64+0x69/0x131
	 entry_SYSCALL64_slow_path+0x25/0x25

We could try to be smart and keep the inline data in this case, or at
least support delayed allocation when allocating the block, but these
solutions would be more complicated and don't seem worthwhile given how
rare this case seems to be.  So just fix the bug by calling
ext4_convert_inline_data() when we're asked to make a page writable, so
that any inline data gets evicted, with the block allocated immediately.
Reported-by: Nick Alcock <nick.alcock@oracle.com>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
[bwh: Backported to 3.16: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

commit c6ade20f upstream.

The WRITE SAME to TRIM translation rewrites the DATA OUT buffer.  While
the SCSI code accomodates for this by passing a read-writable buffer
userspace applications don't cater for this behavior.  In fact it can
be used to rewrite e.g. a readonly file through mmap and should be
considered as a security fix.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
[bwh: Backported to 3.16:
 - Open-code blk_rq_is_passthrough()
 - We don't distinguish which field is invaid so goto invalid_fld
 - Adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

commit 8561eae6 upstream.

The Infiniband spec defines "A multicast address is defined by a
MGID and a MLID" (section 10.5).  Currently the MLID value is not
validated.

Add check to verify that the MLID value is in the correct address
range.

Fixes: 0c33aeed ("[IB] Add checks to multicast attach and detach")
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
[bwh: Backported to 3.16: use literal number instead of IB_MULTICAST_LID_BASE]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

commit 20c7840a upstream.

A list of MGID/MLID pairs is built when doing a multicast attach.  When
the multicast detach is called, the list is searched, and regardless of
the search outcome, the driver detach is called.

If an MGID/MLID pair is not on the list, driver detach should not be
called, and an error should be returned.  Calling the driver without
removing an MGID/MLID pair from the list can leave the core and driver
out of sync.

Fixes: f4e40156 ("IB/uverbs: track multicast group membership for userspace QPs")
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
[bwh: Backported to 3.16: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

commit b58f45c8 upstream.

Make sure to deregister the USB driver before releasing the tty driver
to avoid use-after-free in the USB disconnect callback where the tty
devices are deregistered.

Fixes: 61e12104 ("staging: gdm7240: adding LTE USB driver")
Cc: Won Kang <wkang77@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

commit c272dc2d upstream.

With concurrency managed workqueues, use of dedicated workqueues
can be replaced by using system_wq. Drop mux_rx_wq by using system_wq.

Since there is only one work item per mux_dev and different mux_devs
do not need to be ordered, increase of concurrency level by switching
to system_wq should not break anything.

cancel_work_sync() is used to ensure that work is not pending or
executing on any CPU.

Lastly, since all devices are suspended, which shutdowns the work item
before the driver can be unregistered, it is guaranteed that no work
item is pending or executing by the time exit path runs.
Signed-off-by: Amitoj Kaur Chawla <amitoj1606@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[bwh: Backported to 3.16: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

commit 784047eb upstream.

The "len" could be as low as -14 so we should check for negatives.

Fixes: 9a7fe54d ("staging: r8188eu: Add source files for new driver - part 1")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

commit 4617f564 upstream.

When calling a dm ioctl that doesn't process any data
(IOCTL_FLAGS_NO_PARAMS), the contents of the data field in struct
dm_ioctl are left initialized.  Current code is incorrectly extending
the size of data copied back to user, causing the contents of kernel
stack to be leaked to user.  Fix by only copying contents before data
and allow the functions processing the ioctl to override.
Signed-off-by: Adrian Salido <salidoa@google.com>
Reviewed-by: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

commit 8b8a84c5 upstream.

Commit 16fa3dc7 ("mfd: omap-usb-tll: HOST TLL platform driver")
added support for USB TLL, but uses OMAP_TLL_CHANNEL_CONF_ULPINOBITSTUFF
bit the wrong way. The comments in the code are correct, but the inverted
use of OMAP_TLL_CHANNEL_CONF_ULPINOBITSTUFF causes the register to be
enabled instead of disabled unlike what the comments say.

Without this change the Wrigley 3G LTE modem on droid 4 EHCI bus can
be only pinged few times before it stops responding.

Fixes: 16fa3dc7 ("mfd: omap-usb-tll: HOST TLL platform driver")
Signed-off-by: Tony Lindgren <tony@atomide.com>
Acked-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

commit 942a4873 upstream.

Allocate buffers on HEAP instead of STACK for local structures
that are to be received using usb_control_msg().
Signed-off-by: Maksim Salau <maksim.salau@gmail.com>
Tested-by: Alfredo Rafael Vicente Boix <alviboi@gmail.com>;
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[bwh: Backported to 3.16: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

commit dbd68d8e upstream.

flush_tlb_page() passes a bogus range to flush_tlb_others() and
expects the latter to fix it up.  native_flush_tlb_others() has the
fixup but Xen's version doesn't.  Move the fixup to
flush_tlb_others().

AFAICS the only real effect is that, without this fix, Xen would
flush everything instead of just the one page on remote vCPUs in
when flush_tlb_page() was called.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Nadav Amit <namit@vmware.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: e7b52ffd ("x86/flush_tlb: try flush_tlb_single one by one in flush_tlb_range")
Link: http://lkml.kernel.org/r/10ed0e4dfea64daef10b87fb85df1746999b4dba.1492844372.git.luto@kernel.orgSigned-off-by: Ingo Molnar <mingo@kernel.org>
[bwh: Backported to 3.16: the special case was handled in flush_tlb_func(), not
 native_flush_tlb_others()]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

commit 3d615964 upstream.

DWC3 driver uses of_usb_get_phy_mode() which is
implemented in drivers/usb/phy/of.c and in bare minimal
configuration it might not be pulled in kernel binary.

In case of ARC or ARM this could be easily reproduced with
"allnodefconfig" +CONFIG_USB=m +CONFIG_USB_DWC3=m.

On building all ends-up with:
---------------------->8------------------
  Kernel: arch/arm/boot/Image is ready
  Kernel: arch/arm/boot/zImage is ready
  Building modules, stage 2.
  MODPOST 5 modules
ERROR: "of_usb_get_phy_mode" [drivers/usb/dwc3/dwc3.ko] undefined!
make[1]: *** [__modpost] Error 1
make: *** [modules] Error 2
---------------------->8------------------
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Nicolas Pitre <nicolas.pitre@linaro.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Felix Fietkau <nbd@nbd.name>
Cc: Jeremy Kerr <jk@ozlabs.org>
Cc: linux-snps-arc@lists.infradead.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

commit 4ff33aaf upstream.

When delivering an event to userspace for a file on an NFS share,
if the file is deleted on server side before user reads the event,
user will not get the event.

If the event queue contained several events, the stale event is
quietly dropped and read() returns to user with events read so far
in the buffer.

If the event queue contains a single stale event or if the stale
event is a permission event, read() returns to user with the kernel
internal error code 518 (EOPENSTALE), which is not a POSIX error code.

Check the internal return value -EOPENSTALE in fanotify_read(), just
the same as it is checked in path_openat() and drop the event in the
cases that it is not already dropped.

This is a reproducer from Marko Rauhamaa:

Just take the example program listed under "man fanotify" ("fantest")
and follow these steps:

    ==============================================================
    NFS Server    NFS Client(1)     NFS Client(2)
    ==============================================================
    # echo foo >/nfsshare/bar.txt
                  # cat /nfsshare/bar.txt
                  foo
                                    # ./fantest /nfsshare
                                    Press enter key to terminate.
                                    Listening for events.
    # rm -f /nfsshare/bar.txt
                  # cat /nfsshare/bar.txt
                                    read: Unknown error 518
                  cat: /nfsshare/bar.txt: Operation not permitted
    ==============================================================

where NFS Client (1) and (2) are two terminal sessions on a single NFS
Client machine.
Reported-by: Marko Rauhamaa <marko.rauhamaa@f-secure.com>
Tested-by: Marko Rauhamaa <marko.rauhamaa@f-secure.com>
Cc: <linux-api@vger.kernel.org>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
[bwh: Backported to 3.16: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

commit c4e649b0 upstream.

The ASUS M2N-LR should not trigger boot interrupt quirks although it
carries an Intel 6702PXH.  On this board the boot interrupt quirks cause
incorrect IRQ assignments and should be disabled.

Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=43074Tested-by: Solomon Peachy <pizza@shaftnet.org>
Signed-off-by: Stefan Assmann <sassmann@kpanic.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

commit 117aceb0 upstream.

When committing era metadata to disk, it doesn't always save the latest
spacemap metadata root in superblock. Due to this, metadata is getting
corrupted sometimes when reopening the device. The correct order of update
should be, pre-commit (shadows spacemap root), save the spacemap root
(newly shadowed block) to in-core superblock and then the final commit.
Signed-off-by: Somasundaram Krishnasamy <somasundaram.krishnasamy@oracle.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

commit 7d1fedb6 upstream.

dm_btree_find_lowest_key() is giving incorrect results.  find_key()
traverses the btree correctly for finding the highest key, but there is
an error in the way it traverses the btree for retrieving the lowest
key.  dm_btree_find_lowest_key() fetches the first key of the rightmost
block of the btree instead of fetching the first key from the leftmost
block.

Fix this by conditionally passing the correct parameter to value64()
based on the @find_highest flag.
Signed-off-by: Erez Zadok <ezk@fsl.cs.sunysb.edu>
Signed-off-by: Vinothkumar Raja <vinraja@cs.stonybrook.edu>
Signed-off-by: Nidhi Panpalia <npanpalia@cs.stonybrook.edu>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

commit 53b56da8 upstream.

After converting to use rcu for conntrack hash, one CPU may update
the ct->status via ctnetlink, while another CPU may process the
packets and update the ct->status.

So the non-atomic operation "ct->status |= status;" via ctnetlink
becomes unsafe, and this may clear the IPS_DYING_BIT bit set by
another CPU unexpectedly. For example:
         CPU0                            CPU1
  ctnetlink_change_status        __nf_conntrack_find_get
      old = ct->status              nf_ct_gc_expired
          -                         nf_ct_kill
          -                      test_and_set_bit(IPS_DYING_BIT
      new = old | status;                 -
  ct->status = new; <-- oops, _DYING_ is cleared!

Now using a series of atomic bit operation to solve the above issue.

Also note, user shouldn't set IPS_TEMPLATE, IPS_SEQ_ADJUST directly,
so make these two bits be unchangable too.

If we set the IPS_TEMPLATE_BIT, ct will be freed by nf_ct_tmpl_free,
but actually it is alloced by nf_conntrack_alloc.
If we set the IPS_SEQ_ADJUST_BIT, this may cause the NULL pointer
deference, as the nfct_seqadj(ct) maybe NULL.

Last, add some comments to describe the logic change due to the
commit a963d710 ("netfilter: ctnetlink: Fix regression in CTA_STATUS
processing"), which makes me feel a little confusing.

Fixes: 76507f69 ("[NETFILTER]: nf_conntrack: use RCU for conntrack hash")
Signed-off-by: Liping Zhang <zlpnobody@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
[bwh: Backported to 3.16: IPS_UNCHANGEABLE_MASK was not previously defined and
 ctnetlink_update_status() is not needed]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

commit 88be4c09 upstream.

Currently, ctnetlink_change_conntrack is always protected by _expect_lock,
but this will cause a deadlock when deleting the helper from a conntrack,
as the _expect_lock will be acquired again by nf_ct_remove_expectations:

         CPU0
        ----
  lock(nf_conntrack_expect_lock);
  lock(nf_conntrack_expect_lock);

  *** DEADLOCK ***
  May be due to missing lock nesting notation

  2 locks held by lt-conntrack_gr/12853:
  #0:  (&table[i].mutex){+.+.+.}, at: [<ffffffffa05e2009>]
       nfnetlink_rcv_msg+0x399/0x6a9 [nfnetlink]
  #1:  (nf_conntrack_expect_lock){+.....}, at: [<ffffffffa05f2c1f>]
       ctnetlink_new_conntrack+0x17f/0x408 [nf_conntrack_netlink]

  Call Trace:
   dump_stack+0x85/0xc2
   __lock_acquire+0x1608/0x1680
   ? ctnetlink_parse_tuple_proto+0x10f/0x1c0 [nf_conntrack_netlink]
   lock_acquire+0x100/0x1f0
   ? nf_ct_remove_expectations+0x32/0x90 [nf_conntrack]
   _raw_spin_lock_bh+0x3f/0x50
   ? nf_ct_remove_expectations+0x32/0x90 [nf_conntrack]
   nf_ct_remove_expectations+0x32/0x90 [nf_conntrack]
   ctnetlink_change_helper+0xc6/0x190 [nf_conntrack_netlink]
   ctnetlink_new_conntrack+0x1b2/0x408 [nf_conntrack_netlink]
   nfnetlink_rcv_msg+0x60a/0x6a9 [nfnetlink]
   ? nfnetlink_rcv_msg+0x1b9/0x6a9 [nfnetlink]
   ? nfnetlink_bind+0x1a0/0x1a0 [nfnetlink]
   netlink_rcv_skb+0xa4/0xc0
   nfnetlink_rcv+0x87/0x770 [nfnetlink]

Since the operations are unrelated to nf_ct_expect, so we can drop the
_expect_lock. Also note, after removing the _expect_lock protection,
another CPU may invoke nf_conntrack_helper_unregister, so we should
use rcu_read_lock to protect __nf_conntrack_helper_find invoked by
ctnetlink_change_helper.

Fixes: ca7433df ("netfilter: conntrack: seperate expect locking from nf_conntrack_lock")
Signed-off-by: Liping Zhang <zlpnobody@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
[bwh: Backported to 3.16:
 - ctnetlink_change_helper() still auto-loads modules, so update the unlocking
   and re-locking there
 - Adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

commit e76ca277 upstream.

For CPUs present at boot each logical CPU acquires a reference to the
associated device node of the core. This happens in register_cpu() which
is called by topology_init(). The result of this is that we end up with
a reference held by each thread of the core. However, these references
are never freed if the CPU core is DLPAR removed.

This patch fixes the reference leaks by acquiring and releasing the references
in the CPU hotplug callbacks un/register_cpu_online(). With this patch symmetric
reference counting is observed with both CPUs present at boot, and those DLPAR
added after boot.

Fixes: f86e4718 ("driver/core: cpu: initialize of_node in cpu's device struture")
Signed-off-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
[bwh: Backported to 3.16: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

commit 68baf692 upstream.

Historically struct device_node references were tracked using a kref embedded as
a struct field. Commit 75b57ecf ("of: Make device nodes kobjects so they
show up in sysfs") (Mar 2014) refactored device_nodes to be kobjects such that
the device tree could by more simply exposed to userspace using sysfs.

Commit 0829f6d1 ("of: device_node kobject lifecycle fixes") (Mar 2014)
followed up these changes to better control the kobject lifecycle and in
particular the referecne counting via of_node_get(), of_node_put(), and
of_node_init().

A result of this second commit was that it introduced an of_node_put() call when
a dynamic node is detached, in of_node_remove(), that removes the initial kobj
reference created by of_node_init().

Traditionally as the original dynamic device node user the pseries code had
assumed responsibilty for releasing this final reference in its platform
specific DLPAR detach code.

This patch fixes a refcount underflow introduced by commit 0829f6d1, and
recently exposed by the upstreaming of the recount API.

Messages like the following are no longer seen in the kernel log with this
patch following DLPAR remove operations of cpus and pci devices.

  rpadlpar_io: slot PHB 72 removed
  refcount_t: underflow; use-after-free.
  ------------[ cut here ]------------
  WARNING: CPU: 5 PID: 3335 at lib/refcount.c:128 refcount_sub_and_test+0xf4/0x110

Fixes: 0829f6d1 ("of: device_node kobject lifecycle fixes")
Signed-off-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com>
[mpe: Make change log commit references more verbose]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

commit 99e68909 upstream.

In mlx4_ib_add, procedure mlx4_ib_alloc_eqs is called to allocate EQs.

However, in the mlx4_ib_add error flow, procedure mlx4_ib_free_eqs is not
called to free the allocated EQs.

Fixes: e605b743 ("IB/mlx4: Increase the number of vectors (EQs) available for ULPs")
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

commit 30260501 upstream.

If skb_pad() fails then it frees skb and we don't need to free it again
at the end of the function.

Fixes: dc7bf5d7 ("HSI: Introduce driver for SSI Protocol")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

commit 9a9b8112 upstream.

Update the broadcast address in the priv->broadcast object when the
Pkey value changes in index 0, otherwise the multicast GID value will
keep the previous value of the PKey, and will not be updated.
This leads to interface state down because the interface will keep the
old PKey value.

For example, in SR-IOV environment, if the PF changes the value of PKey
index 0 for one of the VFs, then the VF receives PKey change event that
triggers heavy flush. This flush calls update_parent_pkey that update the
broadcast object and its relevant members. If in this case the multicast
GID will not be updated, the interface state will be down.

Fixes: c2904141 ("IPoIB: Fix pkey change flow for virtualization environments")
Signed-off-by: Feras Daoud <ferasda@mellanox.com>
Signed-off-by: Erez Shitrit <erezsh@mellanox.com>
Reviewed-by: Alex Vesker <valex@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

commit ae97aa52 upstream.

Prevent a deadlock that can occur if we wait on allocations
that try to write back our pages.
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Fixes: 00bfa30a ("NFS: Create a common pgio_alloc and pgio_release...")
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
[bwh: Backported to 3.16:
 - Drop changes in nfs_pageio_init()
 - Adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

commit d594aa02 upstream.

The minimum size for a new stack (512 bytes) setup for arch/x86/boot components
when the bootloader does not setup/provide a stack for the early boot components
is not "enough".

The setup code executing as part of early kernel startup code, uses the stack
beyond 512 bytes and accidentally overwrites and corrupts part of the BSS
section. This is exposed mostly in the early video setup code, where
it was corrupting BSS variables like force_x, force_y, which in-turn affected
kernel parameters such as screen_info (screen_info.orig_video_cols) and
later caused an exception/panic in console_init().

Most recent boot loaders setup the stack for early boot components, so this
stack overwriting into BSS section issue has not been exposed.
Signed-off-by: Ashish Kalra <ashish@bluestacks.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20170419152015.10011-1-ashishkalra@Ashishs-MacBook-Pro.localSigned-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

commit 3c8cb9ad upstream.

Command buffers (skb's) are allocated by the main driver, and freed upon
the last use. That last use is often in mwifiex_free_cmd_buffer(). In
the meantime, if the command buffer gets used by the PCI driver, we map
it as DMA-able, and store the mapping information in the 'cb' memory.

However, if a command was in-flight when resetting the device (and
therefore was still mapped), we don't get a chance to unmap this memory
until after the core has cleaned up its command handling.

Let's keep a refcount within the PCI driver, so we ensure the memory
only gets freed after we've finished unmapping it.

Noticed by KASAN when forcing a reset via:

  echo 1 > /sys/bus/pci/.../reset

The same code path can presumably be exercised in remove() and
shutdown().

[  205.390377] mwifiex_pcie 0000:01:00.0: info: shutdown mwifiex...
[  205.400393] ==================================================================
[  205.407719] BUG: KASAN: use-after-free in mwifiex_unmap_pci_memory.isra.14+0x4c/0x100 [mwifiex_pcie] at addr ffffffc0ad471b28
[  205.419040] Read of size 16 by task bash/1913
[  205.423421] =============================================================================
[  205.431625] BUG skbuff_head_cache (Tainted: G    B          ): kasan: bad access detected
[  205.439815] -----------------------------------------------------------------------------
[  205.439815]
[  205.449534] INFO: Allocated in __build_skb+0x48/0x114 age=1311 cpu=4 pid=1913
[  205.456709] 	alloc_debug_processing+0x124/0x178
[  205.461282] 	___slab_alloc.constprop.58+0x528/0x608
[  205.466196] 	__slab_alloc.isra.54.constprop.57+0x44/0x54
[  205.471542] 	kmem_cache_alloc+0xcc/0x278
[  205.475497] 	__build_skb+0x48/0x114
[  205.479019] 	__netdev_alloc_skb+0xe0/0x170
[  205.483244] 	mwifiex_alloc_cmd_buffer+0x68/0xdc [mwifiex]
[  205.488759] 	mwifiex_init_fw+0x40/0x6cc [mwifiex]
[  205.493584] 	_mwifiex_fw_dpc+0x158/0x520 [mwifiex]
[  205.498491] 	mwifiex_reinit_sw+0x2c4/0x398 [mwifiex]
[  205.503510] 	mwifiex_pcie_reset_notify+0x114/0x15c [mwifiex_pcie]
[  205.509643] 	pci_reset_notify+0x5c/0x6c
[  205.513519] 	pci_reset_function+0x6c/0x7c
[  205.517567] 	reset_store+0x68/0x98
[  205.521003] 	dev_attr_store+0x54/0x60
[  205.524705] 	sysfs_kf_write+0x9c/0xb0
[  205.528413] INFO: Freed in __kfree_skb+0xb0/0xbc age=131 cpu=4 pid=1913
[  205.535064] 	free_debug_processing+0x264/0x370
[  205.539550] 	__slab_free+0x84/0x40c
[  205.543075] 	kmem_cache_free+0x1c8/0x2a0
[  205.547030] 	__kfree_skb+0xb0/0xbc
[  205.550465] 	consume_skb+0x164/0x178
[  205.554079] 	__dev_kfree_skb_any+0x58/0x64
[  205.558304] 	mwifiex_free_cmd_buffer+0xa0/0x158 [mwifiex]
[  205.563817] 	mwifiex_shutdown_drv+0x578/0x5c4 [mwifiex]
[  205.569164] 	mwifiex_shutdown_sw+0x178/0x310 [mwifiex]
[  205.574353] 	mwifiex_pcie_reset_notify+0xd4/0x15c [mwifiex_pcie]
[  205.580398] 	pci_reset_notify+0x5c/0x6c
[  205.584274] 	pci_dev_save_and_disable+0x24/0x6c
[  205.588837] 	pci_reset_function+0x30/0x7c
[  205.592885] 	reset_store+0x68/0x98
[  205.596324] 	dev_attr_store+0x54/0x60
[  205.600017] 	sysfs_kf_write+0x9c/0xb0
...
[  205.800488] Call trace:
[  205.802980] [<ffffffc00020a69c>] dump_backtrace+0x0/0x190
[  205.808415] [<ffffffc00020a96c>] show_stack+0x20/0x28
[  205.813506] [<ffffffc0005d020c>] dump_stack+0xa4/0xcc
[  205.818598] [<ffffffc0003be44c>] print_trailer+0x158/0x168
[  205.824120] [<ffffffc0003be5f0>] object_err+0x4c/0x5c
[  205.829210] [<ffffffc0003c45bc>] kasan_report+0x334/0x500
[  205.834641] [<ffffffc0003c3994>] check_memory_region+0x20/0x14c
[  205.840593] [<ffffffc0003c3b14>] __asan_loadN+0x14/0x1c
[  205.845879] [<ffffffbffc46171c>] mwifiex_unmap_pci_memory.isra.14+0x4c/0x100 [mwifiex_pcie]
[  205.854282] [<ffffffbffc461864>] mwifiex_pcie_delete_cmdrsp_buf+0x94/0xa8 [mwifiex_pcie]
[  205.862421] [<ffffffbffc462028>] mwifiex_pcie_free_buffers+0x11c/0x158 [mwifiex_pcie]
[  205.870302] [<ffffffbffc4620d4>] mwifiex_pcie_down_dev+0x70/0x80 [mwifiex_pcie]
[  205.877736] [<ffffffbffc1397a8>] mwifiex_shutdown_sw+0x190/0x310 [mwifiex]
[  205.884658] [<ffffffbffc4606b4>] mwifiex_pcie_reset_notify+0xd4/0x15c [mwifiex_pcie]
[  205.892446] [<ffffffc000635f54>] pci_reset_notify+0x5c/0x6c
[  205.898048] [<ffffffc00063a044>] pci_dev_save_and_disable+0x24/0x6c
[  205.904350] [<ffffffc00063cf0c>] pci_reset_function+0x30/0x7c
[  205.910134] [<ffffffc000641118>] reset_store+0x68/0x98
[  205.915312] [<ffffffc000771588>] dev_attr_store+0x54/0x60
[  205.920750] [<ffffffc00046f53c>] sysfs_kf_write+0x9c/0xb0
[  205.926182] [<ffffffc00046dfb0>] kernfs_fop_write+0x184/0x1f8
[  205.931963] [<ffffffc0003d64f4>] __vfs_write+0x6c/0x17c
[  205.937221] [<ffffffc0003d7164>] vfs_write+0xf0/0x1c4
[  205.942310] [<ffffffc0003d7da0>] SyS_write+0x78/0xd8
[  205.947312] [<ffffffc000204634>] el0_svc_naked+0x24/0x28
...
[  205.998268] ==================================================================

This bug has been around in different forms for a while. It was sort of
noticed in commit 955ab095 ("mwifiex: Do not kfree cmd buf while
unregistering PCIe"), but it just fixed the double-free, without
acknowledging the potential for use-after-free.

Fixes: fc331460 ("mwifiex: use pci_alloc/free_consistent APIs for PCIe")
Signed-off-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
[bwh: Backported to 3.16: adjust filename]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

commit 6fc091fb upstream.

Print correct command ring address using 'val_64'.
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

commit 6c7a5dce upstream.

Fix potential races in kvm_psci_vcpu_on() by taking the kvm->lock
mutex.  In general, it's a bad idea to allow more than one PSCI_CPU_ON
to process the same target VCPU at the same time.  One such problem
that may arise is that one PSCI_CPU_ON could be resetting the target
vcpu, which fills the entire sys_regs array with a temporary value
including the MPIDR register, while another looks up the VCPU based
on the MPIDR value, resulting in no target VCPU found.  Resolves both
races found with the kvm-unit-tests/arm/psci unit test.
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Reviewed-by: Christoffer Dall <cdall@linaro.org>
Reported-by: Levente Kurusa <lkurusa@redhat.com>
Suggested-by: Christoffer Dall <cdall@linaro.org>
Signed-off-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Christoffer Dall <cdall@linaro.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

commit b7dcf68f upstream.

The > should be >= or we read one space beyond the end of the array.

Fixes: ab5c4f71 ("ath9k: allow to load EEPROM content via firmware API")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
[bwh: Backported to 3.16: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

commit 7f140fc2 upstream.

Enabling vflip currently causes wrong colors.
It seems that (at least with the current sensor setup) REG04_VFLIP_IMG only
changes the vertical readout direction.
Because pixels are arranged RGRG... in odd lines and GBGB... in even lines,
either a one line shift or even/odd line swap is required, too, but
apparently this doesn't happen.

I finally figured out that this can be done manually by setting
REG04_VREF_EN.
Looking at hflip, it turns out that bit REG04_HREF_EN is set there
permanetly, but according to my tests has no effect on the pixel readout
order.
So my conclusion is that the current documentation of sensor register 0x04
is wrong (has changed after preliminary datasheet version 2.2).

I'm pretty sure that automatic vertical line shift/switch can be enabled,
too, but until anyone finds ot how this works, we have to stick with manual
switching.
Signed-off-by: Frank Schäfer <fschaefer.oss@googlemail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
[bwh: Backported to 3.16: adjust filename]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

commit 950e252c upstream.

Otherwise the i2c transfer functions can read or write beyond the end of
stack or heap buffers.
Signed-off-by: Alyssa Milburn <amilburn@zall.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
[bwh: Backported to 3.16:
 - Use obuf instead of state->data
 - Adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>