- 31 May, 2016 10 commits
-
-
Daniel Vetter authored
qxl doesn't have any functions for setting the gamma table, so this is completely defunct. Not nice to lie to userspace, so let's stop! Cc: Dave Airlie <airlied@redhat.com> Signed-off-by:
Daniel Vetter <daniel.vetter@intel.com> Reviewed-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1459331485-28376-10-git-send-email-daniel.vetter@ffwll.ch
-
Daniel Vetter authored
Again the fbdev emulation gamma_set/get functions are only needed for drivers that try to also use 8bpp paletted mode. Which msm doesn't, so this is dead code. Let's rip it out. Cc: Rob Clark <robdclark@gmail.com> Signed-off-by:
-
Daniel Vetter authored
The core does this for us already. Cc: Dave Airlie <airlied@redhat.com> Signed-off-by:
-
Daniel Vetter authored
DRM fbdev emulation only supports pallete_color with depth == 8, and truecolor with depth > 8. Handling depth == 16 for palettes is hence dead code, let's remove it. Signed-off-by:
-
Daniel Vetter authored
No dev->struct_mutex anywhere to be seen. Cc: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by:
Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by:
-
Daniel Vetter authored
No dev->struct_mutex anywhere to be seen. Cc: Xinliang Liu <xinliang.liu@linaro.org> Cc: Xinwei Kong <kong.kongxinwei@hisilicon.com> Signed-off-by:
Xinwei Kong <kong.kongxinwei@hisilicon.com> Signed-off-by:
-
Daniel Vetter authored
No dev->struct_mutex anywhere to be seen. Cc: Liviu Dudau <Liviu.Dudau@arm.com> Signed-off-by:
Liviu Dudau <Liviu.Dudau@arm.com> Signed-off-by:
-
Lukas Wunner authored
Daniel Vetter pointed out that vga_switcheroo_client_probe_defer() could be needed by audio clients as well. To avoid mistakes when someone adds conditions for these in the future, constrain the single existing condition to VGA clients by checking for PCI_BASE_CLASS_DISPLAY. This encompasses both PCI_CLASS_DISPLAY_VGA as well as PCI_CLASS_DISPLAY_3D, which is used by some Nvidia Optimus GPUs. Any future checks for audio clients should then be constrained to PCI_BASE_CLASS_MULTIMEDIA. v6: Spun out from commit introducing vga_switcheroo_client_probe_defer() to keep it a pure refactoring change. (Emil Velikov, Jani Nikula) Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Emil Velikov <emil.l.velikov@gmail.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Signed-off-by:Lukas Wunner <lukas@wunner.de> Signed-off-by:
-
Lukas Wunner authored
So far we've got one condition when DRM drivers need to defer probing on a dual GPU system and it's coded separately into each of the relevant drivers. As suggested by Daniel Vetter, deduplicate that code in the drivers and move it to a new vga_switcheroo helper. This yields better encapsulation of concepts and lets us add further checks in a central place. (The existing check pertains to pre-retina MacBook Pros and an additional check is expected to be needed for retinas.) One might be tempted to check deferred probing conditions in vga_switcheroo_register_client(), but this is usually called fairly late during driver load. The GPU is fully brought up and ready for switching at that point. On boot the ->probe hook is potentially called dozens of times until it finally succeeds, and each time we'd repeat bringup and teardown of the GPU, lengthening boot time considerably and cluttering logfiles. A separate helper is therefore needed which can be called right at the beginning of the ->probe hook. Note that amdgpu currently does not call this helper as the AMD GPUs built into MacBook Pros are only supported by radeon so far. v2: This helper could eventually be used by audio clients as well, so rephrase kerneldoc to refer to "client" instead of "GPU" and move the single existing check in an if block specific to PCI_CLASS_DISPLAY_VGA devices. Move documentation on that check from kerneldoc to a comment. (Daniel Vetter) v3: Mandate in kerneldoc that registration of client shall only happen after calling this helper. (Daniel Vetter) v4: Rebase on 412c8f7d ("drm/radeon: Return -EPROBE_DEFER when amdkfd not loaded") v5: Some Optimus GPUs use PCI_CLASS_DISPLAY_3D, make sure those are matched as well. (Emil Velikov) v6: The if-condition referring to PCI_BASE_CLASS_DISPLAY may be considered a functional change. Move to a separate commit to keep this a pure refactoring change. (Emil Velikov, Jani Nikula) Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: -
Gerd Hoffmann authored
Needed for multihead setups where we can have disabled outputs and therefore plane->crtc can be NULL. Signed-off-by:
Gerd Hoffmann <kraxel@redhat.com> Signed-off-by:
-
- 30 May, 2016 3 commits
-
-
Daniel Vetter authored
Signed-off-by:
Jani Nikula <jani.nikula@linux.intel.com> Signed-off-by:
-
Liu Ying authored
When a CRTC is going to be disabled, it's state may contain a display mode with zeroed content. This could be reproduced by HDMI cable hotplug out operation with legacy fbdev support in dual display cases. It would confuse driver's CRTC callback ->mode_fixup and make the total state be rejected. So, let's don't call the callback for the CRTC. Signed-off-by:
Liu Ying <gnuiyl@gmail.com> Signed-off-by:
-
Valdis Kletnieks authored
Fix egregious typo in comment. Signed-off-by:
Valdis Kletnieks <valdis.kletnieks@vt.edu> Signed-off-by:
-
- 24 May, 2016 2 commits
-
-
Daniel Vetter authored
Forgot to update the docs when nuking that. Oops. Fixes: fcee5906 ("drm: Nuke ->vblank_disable_allowed") Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Matthew Auld authored
This patch aims to replace the roll-your-own seqlock implementation with full-blown seqlock'. We also remove the timestamp ring-buffer in favour of single timestamp/count pair protected by a seqlock. In turn this means we can now increment the vblank freely without the need for clamping. v2: - reduce the scope of the seqlock, keeping vblank_time_lock - make the seqlock per vblank_crtc, so multiple readers aren't blocked by the writer Cc: Mario Kleiner <mario.kleiner@tuebingen.mpg.de> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:Matthew Auld <matthew.auld@intel.com> Reviewed-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
Mario Kleiner <mario.kleiner.de@gmail.com> Signed-off-by:
-
- 23 May, 2016 6 commits
-
-
Heinrich Schuchardt authored
Do not dereference node before the check if node is NULL. Signed-off-by:
Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by:
Eric Engestrom <eric.engestrom@imgtec.com> Signed-off-by:
-
Geert Uytterhoeven authored
Submitters of device tree binding documentation may forget to CC the subsystem maintainer if this is missing. Signed-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Cc: David Airlie <airlied@linux.ie> Cc: dri-devel@lists.freedesktop.org Signed-off-by:
-
Dave Airlie authored
The tiled 5K Dell monitor appears to be hiding it's tiled mode inside the displayid timings block, this patch parses this blocks and adds the modes to the modelist. v1.1: add missing __packed. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=95207Signed-off-by:
Dave Airlie <airlied@redhat.com>
-
Dave Airlie authored
We need to use this for validating modeline additions. Signed-off-by: -
Tomas Bzatek authored
This will iterate over all DisplayID blocks found in the buffer. Previously only the first block was parsed. https://bugs.freedesktop.org/show_bug.cgi?id=95207Signed-off-by:
Tomas Bzatek <tomas@bzatek.net> Reviewed-by:
Jani Nikula <jani.nikula@intel.com> Signed-off-by:
-
Dave Airlie authored
This just makes the code easier to follow. Reviewed-by:
-
- 20 May, 2016 19 commits
-
-
Daniel Vetter authored
This was added in commit 0a3e67a4 Author: Jesse Barnes <jbarnes@virtuousgeek.org> Date: Tue Sep 30 12:14:26 2008 -0700 drm: Rework vblank-wait handling to allow interrupt reduction. to stay backwards-compatible with old UMS code that didn't even tell the kernel when it did a modeset, so that the kernel could save/restore vblank counters. At worst this means vblanks will be somewhat funky on a setup that very likely no one still runs. So let's just nuke it. Plan B would be to set it unconditionally in drm_vblank_init for kms drivers, instead of in each driver separately. So if this patch breaks anything please only restore the hunks in drmP.h and drm_irq.c, plus add a check for DRIVER_MODESET in drm_vblank_init. Stumbled over this in a discussion on irc with Chris. Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Liviu Dudau <liviu.dudau@arm.com> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Eric Anholt <eric@anholt.net> Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Cc: Inki Dae <inki.dae@samsung.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Mark Yao <mark.yao@rock-chips.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Tested-by:
-
git://people.freedesktop.org/~thomash/linuxDave Airlie authored
Pull request of 2016-05-20 * tag 'vmwgfx-next-160520' of git://people.freedesktop.org/~thomash/linux: drm/vmwgfx: Report vmwgfx version to vmware.log drm/vmwgfx: Add VMWare host messaging capability drm/vmwgfx: Kill some lockdep warnings
-
git://github.com/skeggsb/linuxDave Airlie authored
Nothing too exciting here, there's a larger chunk of work that still needs more testing but not likely to get that done today - so - here's the rest of it. Assuming nothing else goes horribly wrong, I should be able to send the rest Monday if it isn't too late.... Changes: - Improvements to power sensor support - Initial attempt at GM108 support - Minor fixes to GR init + ucode - Make use of topology information (provided by the GPU) in various places, should at least fix some fault recovery issues and engine/runlist mapping confusion on newer GPUs. * 'linux-4.7' of git://github.com/skeggsb/linux: (51 commits) drm/nouveau/gr/gf100-: fix race condition in fecs/gpccs ucode drm/nouveau/core: recognise GM108 chipsets drm/nouveau/gr/gm107-: fix touching non-existent ppcs in attrib cb setup drm/nouveau/gr/gk104-: share implementation of ppc exception init drm/nouveau/gr/gk104-: move rop_active_fbps init to nonctx drm/nouveau/bios/pll: check BIT table version before trying to parse it drm/nouveau/bios/pll: prevent oops when limits table can't be parsed drm/nouveau/volt/gk104: round up in gk104_volt_set drm/nouveau/fb/gm200: setup mmu debug buffer registers at init() drm/nouveau/fb/gk20a,gm20b: setup mmu debug buffer registers at init() drm/nouveau/fb/gf100-: allocate mmu debug buffers drm/nouveau/fb: allow chipset-specific actions for oneinit() drm/nouveau/gr/gm200-: fix bad hardcoding of a max-tpcs-per-gpc value drm/nouveau/gr/gm200-: rop count == ltc count drm/nouveau/gr/gm200: modify the mask when copying mmu settings from fb drm/nouveau/gr/gm200: move some code into init_gpc_mmu() hook drm/nouveau/gr/gm200: make generate_main() static drm/nouveau/gr/gf100-: abstract fetching rop count drm/nouveau/gr/gf100-: rename magic_not_rop_nr to screen_tile_row_offset drm/nouveau/gr/gf100-: remove hardcoded idle_timeout values ...
-
Sinclair Yeh authored
When tracking down a customer issue, it is useful to know exactly which version of the vmwgfx they are using. Since vmware.log is often the only available debug log, report vmwgfx version in there. Signed-off-by:
Sinclair Yeh <syeh@vmware.com> Signed-off-by:
Thomas Hellstrom <thellstrom@vmware.com>
-
Sinclair Yeh authored
This patch adds capabilities for a VMWare guest to send and receive messages from the host, and adds functions to sending log messages to vmware.log and to request device settings that aren't available through the virtual hardware, e.g. certain settings in the VMX file. Signed-off-by:
-
Thomas Hellstrom authored
Some global KMS state that is elsewhere protected by the mode_config mutex here needs to be protected with a local mutex. Remove corresponding lockdep checks and introduce a new driver-private global_kms_state_mutex, and make sure its locking order is *after* the crtc locks in order to avoid having to release those when the new mutex is taken. Signed-off-by:
Brian Paul <brianp@vmware.com> Reviewed-by:
-
Ben Skeggs authored
This is a simplied version of the fix by Roy in fdo#93629. While this doesn't appear to fix the issues for the users in that report, it's a real issue that deserves to be resolved. Reported-by:
Roy Spliet <rspliet@eclipso.eu> Signed-off-by:
Ben Skeggs <bskeggs@redhat.com>
-
Ben Skeggs authored
Signed-off-by: -
Ben Skeggs authored
Also removes an XXX; according to nvgpu headers the field is called NV_PGRAPH_GPCS_SWDX_TC_BETA_CB_SIZE_DIV3, so, apparently not some magic we need to figure out :) Signed-off-by: -
Ben Skeggs authored
This was really inconsistent, some implementations could touch PPCs that didn't exist, others neglected to touch ones that did. Signed-off-by: -
Ben Skeggs authored
Matches newer RM. Signed-off-by: -
Ben Skeggs authored
Signed-off-by: -
Ben Skeggs authored
Signed-off-by: -
Karol Herbst authored
We always want a equal or higher voltage than the requested ones, otherwise nouveau undervolts. Signed-off-by:
Karol Herbst <nouveau@karolherbst.de> Signed-off-by:
-
Ben Skeggs authored
Signed-off-by: -
Ben Skeggs authored
Signed-off-by: -
Ben Skeggs authored
Later chipsets require setting this up both in FB and GR, so let's just move the allocation to FB. Signed-off-by: -
Ben Skeggs authored
Signed-off-by: -
Ben Skeggs authored
Signed-off-by:
-
