- 12 May, 2007 12 commits
-
-
Mark A. Greer authored
The mv64x60 host bridge has many windows between its various components (cpu, system memory, ethernet ctlr, MPSC, DMA ctlr, PCI MEM, PCI I/O). Unfortunately, the firmware on some of mv64x60-based platforms do not properly or completely configure those windows (e.g., MPSC->system memory windows not configured or CPU->PCI MEM space not configured). So, the missing configuration needs to be done in either the bootwrapper or in the kernel. To keep the kernel as clean as possible, it is done in the bootwrapper. Note that I/O controller configuration is NOT being done, its only the windows to allow the I/O controllers and other components to access memory, etc. that is being done--drivers assume that their controllers can already access system memory). Table of routines and the windows they configure: mv64x60_config_ctlr_windows() ENET->System Memory MPSC->System Memory IDMA->System Memory mv64x60_config_pci_windows() PCI MEM->System Memory PCI I/O->Bridge's Registers mv64x60_config_cpu2pci_window() CPU->PCI MEM CPU->PCI I/O Signed-off-by:
Mark A. Greer <mgreer@mvista.com> Signed-off-by:
Paul Mackerras <paulus@samba.org>
-
Mark A. Greer authored
Add 'zImage.dts' and 'zImage.dts_initrd' build rules that automatically compile and wrap a dts file from arch/powerpc/boot/dts into the zImage file. The resulting zImage will be arch/powerpc/boot/zImage.dts.<platform> and arch/powerpc/boot/zImage.dts_initrd.<platform>, respectively. Having separate rules allows the user to choose whether to include a device tree--and which device tree--at build time. This is useful when one Makefile target builds a zImage that runs on several platforms except for differing device trees. By just setting CONFIG_DEVICE_TREE and running "make zImage.dts" the exact zImage you want is built without Makefile bloat or manually running the wrapper script. The dts file is expected to be arch/powerpc/boot/dts/$(CONFIG_DEVICE_TREE) Signed-off-by:
-
Simon Arlott authored
Spelling fixes in arch/ppc/. Signed-off-by:
Simon Arlott <simon@fire.lp0.eu> Signed-off-by:
-
Scott Wood authored
The boot wrapper platform init code on 83xx and 85xx using the cuboot platform type was incorrectly assuming that u-boot supplied the size of the initrd, whereas it actually supplies the end address. This fixes it. Signed-off-by:
Scott Wood <scottwood@freescale.com> Signed-off-by:
-
Geoff Levand authored
Update ps3_defconfig. Signed-off-by:
Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by:
-
Geoff Levand authored
Fix compiler warning: ps3/smp.c:122: warning: ignoring return value of 'request_irq' Signed-off-by:
-
Kim Phillips authored
An mdio bus scan was added with ucc_geth phylib migration patches, now machines complain on boot, saying: prom_parse: Bad cell count for /qe@e0100000/mdio@2120/ethernet-phy@00 prom_parse: Bad cell count for /qe@e0100000/mdio@2120/ethernet-phy@01 since size-cells can indeed be 0, this patch fixes the check. Signed-off-by:
Kim Phillips <kim.phillips@freescale.com> Signed-off-by:
-
will schmidt authored
Greatly simplify the function smp_space_timers. The stolen time calculation (per comment within the code) doesn't need the half-jiffy stagger any more. There isn't an issue with bouncing off global locks, so we really shouldn't need any sort of staggering at all. However, the last_jiffy value still needs to be set. This removes the extra stagger logic, and just sets the values. This change should benefit applications that rely on barrier synchronization, and will help cut down OS jitter. Boot tested across the board (G5,power3,power4,power5,970mp blade). Signed-off-by:
Will Schmidt <will_schmidt@vnet.ibm.com> Signed-off-by:
-
Stephen Rothwell authored
Fixes warnings: arch/powerpc/platforms/ps3/system-bus.c: In function 'ps3_map_sg': arch/powerpc/platforms/ps3/system-bus.c:278: warning: unused variable 'i' arch/powerpc/platforms/ps3/system-bus.c:277: warning: unused variable 'dev' arch/powerpc/platforms/ps3/setup.c:103: warning: 'prealloc' defined but not used Signed-off-by:
Stephen Rothwell <sfr@canb.auug.org.au> Acked-by:
-
Stephen Rothwell authored
fixes: arch/powerpc/platforms/pasemi/idle.c: In function 'pasemi_system_reset_exception': arch/powerpc/platforms/pasemi/idle.c:55: warning: implicit declaration of function 'do_IRQ' Signed-off-by:
-
Stephen Rothwell authored
Signed-off-by:
-
Stephen Rothwell authored
This case will never be hit, but it should be corrected anyway. Signed-off-by:
-
- 11 May, 2007 28 commits
-
-
Linus Torvalds authored
* 'linus' of master.kernel.org:/pub/scm/linux/kernel/git/perex/alsa: (122 commits) [ALSA] version 1.0.14rc4 [ALSA] Add speaker pin sequencing to hda_codec.c:snd_hda_parse_pin_def_config() [ALSA] hda-codec - Add ALC861VD Lenovo support [ALSA] hda-codec - Fix connection list in generic parser [ALSA] usb-audio: work around wrong wMaxPacketSize on ESI M4U [ALSA] usb-audio: work around broken M-Audio MidiSport Uno firmware [ALSA] usb-audio: explicitly match Logitech QuickCam [ALSA] hda-codec - Fix a typo [ALSA] hda-codec - Fix ALC880 uniwill auto-mutes [ALSA] hda-codec - Fix AD1988 SPDIF playback route control [ALSA] wm8750 typo fix [ALSA] wavefront: only declare isapnp on CONFIG_PNP [ALSA] hda-codec - bug fixes for stac92xx HDA codecs. [ALSA] add MODULE_FIRMWARE entries [ALSA] do not depend on FW_LOADER when internal firmware images are used [ALSA] hda-codec - Fix resume of STAC92xx codecs [ALSA] usbaudio - Revert the minimal period size fix patch [ALSA] hda-codec - Add support for new HP DV series laptops [ALSA] usb-audio - Fix the minimum period size per transfer mode [ALSA] sound/pcmcia/vx/vxpocket.c: fix an if() condition ...
-
ssh://master.kernel.org/pub/scm/linux/kernel/git/mchehab/v4l-dvbLinus Torvalds authored
* 'master' of ssh://master.kernel.org/pub/scm/linux/kernel/git/mchehab/v4l-dvb: (44 commits) V4L/DVB (5571): V4l1-compat: Make VIDIOCSPICT return errors in a useful way V4L/DVB (5624): Radio-maestro.c cleanup V4L/DVB (5623): Dsbr100.c Replace usb_dsbr100_do_ioctl to use video_ioctl2 V4L/DVB (5622): Radio-zoltrix.c cleanup V4L/DVB (5621): Radio-cadet.c Replace cadet_do_ioctl to use video_ioctl2 V4L/DVB (5619): Dvb-usb: fix typo V4L/DVB (5618): Cx88: Drop the generic i2c client from cx88-vp3054-i2c V4L/DVB (5617): V4L2: videodev, allow debugging V4L/DVB (5614): M920x: Disable second adapter on LifeView TV Walker Twin V4L/DVB (5613): M920x: loosen up 80-col limit V4L/DVB (5612): M920x: rename function prefixes from m9206_foo to m920x_foo V4L/DVB (5611): M920x: replace deb_rc with deb V4L/DVB (5610): M920x: remove duplicated code V4L/DVB (5609): M920x: group like functions together V4L/DVB (5608): M920x: various whitespace cleanups V4L/DVB (5607): M920x: Initial support for devices likely manufactured by Dposh V4L/DVB (5606): M920x: add "c-basic-offset: 8" to help emacs to enforce tabbing V4L/DVB (5605): M920x: Add support for LifeView TV Walker Twin V4L/DVB (5603): V4L: Prevent queueing queued buffers. V4L/DVB (5602): Enable DiSEqC in Starbox II (vp7021a) ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6Linus Torvalds authored
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6: [IA64] Quicklist support for IA64 [IA64] fix Kprobes reentrancy [IA64] SN: validate smp_affinity mask on intr redirect [IA64] drivers/char/snsc_event.c:206: warning: unused variable `p' [IA64] mca.c:121: warning: 'cpe_poll_timer' defined but not used [IA64] Fix - Section mismatch: reference to .init.data:mvec_name [IA64] more warning cleanups [IA64] Wire up epoll_pwait and utimensat [IA64] Fix warnings resulting from type-checking in dev_dbg() [IA64] typo s/kenrel/kernel/
-
Andi Kleen authored
The code was ok, but triggered warnings for calling __init from __cpuinit. Instead call it from check_bugs instead. Signed-off-by:
Andi Kleen <ak@suse.de> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Andrew Hastings authored
I'm using a custom BIOS to configure the northbridge GART at address 0x80000000, size 2G. Linux complains: "Aperture from northbridge cpu 0 beyond 4GB. Ignoring." I think there's an off-by-two error in arch/x86_64/kernel/aperture.c: AK: use correct types for i386 Signed-off-by:
-
Andi Kleen authored
Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivialLinus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivial: further UTF-8 fixes and name correction Fix wrong identifier name in Documentation/kref.txt
-
David Woodhouse authored
> -** Copyright 1994 by Bj<94>rn Brauel > +** Copyright 1994 by Bj”rn Brauel I think these were cp437, and it should read 'Björn'. (asm-m68k/atari*.h) Also note that Arnaldo just put more legacy noise into CREDITS... Signed-off-by:Adrian Bunk <bunk@stusta.de>
-
Satyam Sharma authored
There's a typo / wrong identifier name in Documentation/kref.txt. Fix it. Signed-off-by:
Satyam Sharma <ssatyam@cse.iitk.ac.in> Acked-by:
Corey Minyard <minyard@acm.org> Signed-off-by:
-
git://ftp.linux-mips.org/pub/scm/upstream-ip22Linus Torvalds authored
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-ip22: Convert SGI IP22 and specific drivers to platform_device.
-
git://ftp.linux-mips.org/pub/scm/upstream-linusLinus Torvalds authored
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: (28 commits) [MIPS] Rework cobalt_board_id [MIPS] Use RTC_CMOS for Cobalt [MIPS] Use platform_device for Cobalt UART [MIPS] Separate Alchemy processor based boards config [MIPS] Fix build error in atomic64_cmpxchg [MIPS] Run checksyscalls for N32 and O32 ABI [MIPS] tlbex: use __maybe_unused [MIPS] excite: use __maybe_unused [MIPS] Add extern cobalt_board_id [MIPS] Remove unused CONFIG_TOSHIBA_BOARDS [MIPS] Rename tb0229_defconfig to tb0219_defconfig [MIPS] Update tb0229_defconfig; add CONFIG_GPIO_TB0219. [MIPS] Add minimum defconfig for RBHMA4200 [MIPS] SB1: Build fix. [MIPS] Drop __devinit tag from allocate_irqno() and free_irqno() [MIPS] clocksource: use CLOCKSOURCE_MASK() macro [MIPS] Remove LIMITED_DMA support [MIPS] Remove Momenco Jaguar ATX support [MIPS] Remove Momenco Ocelot G support [MIPS] FPU hazard handling ...
-
git://git.kernel.dk/data/git/linux-2.6-blockLinus Torvalds authored
* 'for-linus' of git://git.kernel.dk/data/git/linux-2.6-block: Fix compile/link of init/do_mounts.c with !CONFIG_BLOCK When stacked block devices are in-use (e.g. md or dm), the recursive calls
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/audit-currentLinus Torvalds authored
* 'audit.b38' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/audit-current: [PATCH] Abnormal End of Processes [PATCH] match audit name data [PATCH] complete message queue auditing [PATCH] audit inode for all xattr syscalls [PATCH] initialize name osid [PATCH] audit signal recipients [PATCH] add SIGNAL syscall class (v3) [PATCH] auditing ptrace
-
Linus Torvalds authored
* 'upstream-fixes' of master.kernel.org:/pub/scm/linux/kernel/git/jikos/hid: USB HID: hiddev - fix race between hiddev_send_event() and hiddev_release() HID: add hooks for getkeycode() and setkeycode() methods HID: switch to using input_dev->dev.parent USB HID: Logitech wheel 0x046d/0xc294 needs HID_QUIRK_NOGET quirk USB HID: usb_buffer_free() cleanup USB HID: report descriptor of Cypress USB barcode readers needs fixup Bluetooth HID: HIDP - don't initialize force feedback USB HID: update CONFIG_USB_HIDINPUT_POWERBOOK description HID: add input mappings for non-working keys on Logitech S510 remote
-
Christoph Lameter authored
IA64 is the origin of the quicklist implementation. So cut out the pieces that are now in core code and modify the functions called. Signed-off-by:
Christoph Lameter <clameter@sgi.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Tony Luck <tony.luck@intel.com>
-
Anil S Keshavamurthy authored
In case of reentrance i.e when a probe handler calls a functions which inturn has a probe, we save a previous kprobe information and just single step the reentrant probe without calling the actual probe handler. During this reentracy period, if an interrupt occurs and if probe happens to trigger in the inturrupt path, then we were corrupting the previous kprobe( as we were overriding the previous kprobe info) info their by crashing the system. This patch fixes this issues by having a an array of previous kprobe info struct(with the array size of 2). This similar technique is not needed on i386 and x86_64 because by default interrupts are turn off in the break/int3 exception handler. Signed-off-by:
Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Signed-off-by:
-
John Keller authored
On SN, only allow one bit to be set in the smp_affinty mask when redirecting an interrupt. Currently setting multiple bits is allowed, but only the first bit is used in determining the CPU to redirect to. This has caused confusion among some customers. [akpm@linux-foundation.org: fixes] Signed-off-by:
John Keller <jpk@sgi.com> Signed-off-by:
-
Linus Torvalds authored
* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: (31 commits) [NETFILTER]: xt_conntrack: add compat support [NETFILTER]: iptable_raw: ignore short packets sent by SOCK_RAW sockets [NETFILTER]: iptable_{filter,mangle}: more descriptive "happy cracking" message [NETFILTER]: nf_nat: Clears helper private area when NATing [NETFILTER]: ctnetlink: clear helper area and handle unchanged helper [NETFILTER]: nf_conntrack: Removes unused destroy operation of l3proto [NETFILTER]: nf_conntrack: Removes duplicated declarations [NETFILTER]: nf_nat: remove unused argument of function allocating binding [NETFILTER]: Clean up table initialization [NET_SCHED]: Avoid requeue warning on dev_deactivate [NET_SCHED]: Reread dev->qdisc for NETDEV_TX_OK [NET_SCHED]: Rationalise return value of qdisc_restart [NET]: Fix dev->qdisc race for NETDEV_TX_LOCKED case [UDP]: Fix AF-specific references in AF-agnostic code. [IrDA]: KingSun/DonShine USB IrDA dongle support. [IPV6] ROUTE: Assign rt6i_idev for ip6_{prohibit,blk_hole}_entry. [IPV6]: Do no rely on skb->dst before it is assigned. [IPV6]: Send ICMPv6 error on scope violations. [SCTP]: Do not include ABORT chunk header in the notification. [SCTP]: Correctly copy addresses in sctp_copy_laddrs ... -
Kenichi Nagai authored
When exporting input device bitmaps via compat_ioctl on BIG_ENDIAN platforms evdev calculates data size incorrectly. This causes buffer overflow if user specifies buffer smaller than maxlen. Signed-off-by:
Kenichi Nagai <kenichi3.nagai@toshiba.co.jp> Signed-off-by:
Dmitry Torokhov <dtor@mail.ru> Signed-off-by:
-
Ralf Baechle authored
Signed-off-by:Ralf Baechle <ralf@linux-mips.org>
-
NeilBrown authored
During a 'resync' or similar activity, md checks if the devices in the array are otherwise active and winds back resync activity when they are. This test in done in is_mddev_idle, and it is somewhat fragile - it sometimes thinks there is non-sync io when there isn't. The test compares the total sectors of io (disk_stat_read) with the sectors of resync io (disk->sync_io). This has problems because total sectors gets updated when a request completes, while resync io gets updated when the request is submitted. The time difference can cause large differenced between the two which do not actually imply non-resync activity. The test currently allows for some fuzz (+/- 4096) but there are some cases when it is not enough. The test currently looks for any (non-fuzz) difference, either positive or negative. This clearly is not needed. Any non-sync activity will cause the total sectors to grow faster than the sync_io count (never slower) so we only need to look for a positive differences. If we do this then the amount of in-flight sync io will never cause the appearance of non-sync IO. Once enough non-sync IO to worry about starts happening, resync will be slowed down and the measurements will thus be more precise (as there is less in-flight) and control of resync will still be suitably responsive. Signed-off-by:
Neil Brown <neilb@suse.de> Signed-off-by:
-
Robert P. J. Day authored
Remove the obsolete "if [ ]" construct from the video console Kconfig file. Signed-off-by:
Robert P. J. Day <rpjday@mindspring.com> Acked-by:
James Simmons <jsimmons@infradead.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by:
-
Antonino A. Daplas authored
Convert internal wait_pm2() function to fb API fb_sync() method. Signed-off-by:
Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by:
Antonino Daplas <adaplas@gmail.com> Signed-off-by:
-
Jean Delvare authored
Let the user enable debugging messages in nvidiafb. Signed-off-by:
Jean Delvare <khali@linux-fr.org> Signed-off-by:
-
Jean Delvare authored
Fix rivafb's I2C getscl callback function, as was done in nvidiafb recently. Signed-off-by:
-
Nicolas Ferre authored
Adds a framebuffer driver to ATMEL AT91SAM9x and AT32 aka AVR32 platforms. Those chips share quite the same IP and this code is suitable for both architectures. Signed-off-by:
Nicolas Ferre <nicolas.ferre@rfo.atmel.com> Signed-off-by:
-
Krzysztof Helt authored
This is a basic port from 2.4 kernel to 2.6. Acceleration is lost and big endian support probably too. The driver works in 8, 16 and 32 bit mode. [adaplas] - change VESA_* to FB_BLANK_* constants - removed unused function clear_memory - fix uninitialized variable compiler warning - some whitespace cleaning [akpm@linux-foundation.org: Nuke pestiferous CVS string] Signed-off-by:
-
Michal Piotrowski authored
ups... coding style. Signed-off-by:
Michal Piotrowski <michal.k.k.piotrowski@gmail.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by:
-
