We should not set con->state to CLOSED here; that happens in
ceph_fault() in the caller, where it first asserts that the state
is not yet CLOSED.  Avoids a BUG when the features don't match.

Since the fail_protocol() has become a trivial wrapper, replace
calls to it with direct calls to reset_connection().
Signed-off-by: Sage Weil <sage@inktank.com>
Reviewed-by: Alex Elder <elder@inktank.com>

A number of assertions in the ceph messenger are implemented with
BUG_ON(), killing the system if connection's state doesn't match
what's expected.  At this point our state model is (evidently) not
well understood enough for these assertions to trigger a BUG().
Convert all BUG_ON(con->state...) calls to be WARN_ON(con->state...)
so we learn about these issues without killing the machine.

We now recognize that a connection fault can occur due to a socket
closure at any time, regardless of the state of the connection.  So
there is really nothing we can assert about the state of the
connection at that point so eliminate that assertion.
Reported-by: Ugis <ugis22@gmail.com>
Tested-by: Ugis <ugis22@gmail.com>
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Sage Weil <sage@inktank.com>

When ceph_osdc_handle_map() is called to process a new osd map,
kick_requests() is called to ensure all affected requests are
updated if necessary to reflect changes in the osd map.  This
happens in two cases:  whenever an incremental map update is
processed; and when a full map update (or the last one if there is
more than one) gets processed.

In the former case, the kick_requests() call is followed immediately
by a call to reset_changed_osds() to ensure any connections to osds
affected by the map change are reset.  But for full map updates
this isn't done.

Both cases should be doing this osd reset.

Rather than duplicating the reset_changed_osds() call, move it into
the end of kick_requests().
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Sage Weil <sage@inktank.com>

The kick_requests() function is called by ceph_osdc_handle_map()
when an osd map change has been indicated.  Its purpose is to
re-queue any request whose target osd is different from what it
was when it was originally sent.

It is structured as two loops, one for incomplete but registered
requests, and a second for handling completed linger requests.
As a special case, in the first loop if a request marked to linger
has not yet completed, it is moved from the request list to the
linger list.  This is as a quick and dirty way to have the second
loop handle sending the request along with all the other linger
requests.

Because of the way it's done now, however, this quick and dirty
solution can result in these incomplete linger requests never
getting re-sent as desired.  The problem lies in the fact that
the second loop only arranges for a linger request to be sent
if it appears its target osd has changed.  This is the proper
handling for *completed* linger requests (it avoids issuing
the same linger request twice to the same osd).

But although the linger requests added to the list in the first loop
may have been sent, they have not yet completed, so they need to be
re-sent regardless of whether their target osd has changed.

The first required fix is we need to avoid calling __map_request()
on any incomplete linger request.  Otherwise the subsequent
__map_request() call in the second loop will find the target osd
has not changed and will therefore not re-send the request.

Second, we need to be sure that a sent but incomplete linger request
gets re-sent.  If the target osd is the same with the new osd map as
it was when the request was originally sent, this won't happen.
This can be fixed through careful handling when we move these
requests from the request list to the linger list, by unregistering
the request *before* it is registered as a linger request.  This
works because a side-effect of unregistering the request is to make
the request's r_osd pointer be NULL, and *that* will ensure the
second loop actually re-sends the linger request.

Processing of such a request is done at that point, so continue with
the next one once it's been moved.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Sage Weil <sage@inktank.com>

The functions rbd_get_dev() and rbd_put_dev() are trivial wrappers
that add no value, and their existence suggests they may do more
than what they do.

Get rid of them.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Dan Mick <dan.mick@inktank.com>

In kick_requests(), we need to register the request before we
unregister the linger request.  Otherwise the unregister will
reset the request's osd pointer to NULL.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Sage Weil <sage@inktank.com>

The red-black node in the ceph osd request structure is initialized
in ceph_osdc_alloc_request() using rbd_init_node().  We do need to
initialize this, because in __unregister_request() we call
RB_EMPTY_NODE(), which expects the node it's checking to have
been initialized.  But rb_init_node() is apparently overkill, and
may in fact be on its way out.  So use RB_CLEAR_NODE() instead.

For a little more background, see this commit:
    4c199a93 rbtree: empty nodes have no color"
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Sage Weil <sage@inktank.com>

The red-black node node in the ceph osd event structure is not
initialized in create_osdc_create_event().  Because this node can
be the subject of a RB_EMPTY_NODE() call later on, we should ensure
the node is initialized properly for that.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Sage Weil <sage@inktank.com>

The red-black node node in the ceph osd structure is not initialized
in create_osd().  Because this node can be the subject of a
RB_EMPTY_NODE() call later on, we should ensure the node is
initialized properly for that.  Add a call to RB_CLEAR_NODE()
initialize it.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Sage Weil <sage@inktank.com>

When a connection's socket disconnects, or if there's a protocol
error of some kind on the connection, a fault is signaled and
the connection is reset (closed and reopened, basically).  We
currently get an error message on the log whenever this occurs.

A ceph connection will attempt to reestablish a socket connection
repeatedly if a fault occurs.  This means that these error messages
will get repeatedly added to the log, which is undesirable.

Change the error message to be a warning, so they don't get
logged by default.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Sage Weil <sage@inktank.com>

A connection's socket can close for any reason, independent of the
state of the connection (and without irrespective of the connection
mutex).  As a result, the connectino can be in pretty much any state
at the time its socket is closed.

Handle those other cases at the top of con_work().  Pull this whole
block of code into a separate function to reduce the clutter.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Sage Weil <sage@inktank.com>

ENOTSUPP is not a standard errno (it shows up as "Unknown error 524"
in an error message).  This is what was getting produced when the
the local rbd code does not implement features required by a
discovered rbd image.

Change the error code returned in this case to ENXIO.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Sage Weil <sage@inktank.com>

In __unregister_linger_request(), the request is being removed
from the osd client's req_linger list only when the request
has a non-null osd pointer.  It should be done whether or not
the request currently has an osd.

This is most likely a non-issue because I believe the request
will always have an osd when this function is called.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Sage Weil <sage@inktank.com>

RBD_MAX_SEG_NAME_LEN represents the maximum length of an rbd object
name (i.e., one of the objects providing storage backing an rbd
image).

Another symbol, MAX_OBJ_NAME_SIZE, is used in the osd client code to
define the maximum length of any object name in an osd request.

Right now they disagree, with RBD_MAX_SEG_NAME_LEN being too big.

There's no real benefit at this point to defining the rbd object
name length limit separate from any other object name, so just
get rid of RBD_MAX_SEG_NAME_LEN and use MAX_OBJ_NAME_SIZE in its
place.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Sage Weil <sage@inktank.com>

If an osd has no requests and no linger requests, __reset_osd()
will just remove it with a call to __remove_osd().  That drops
a reference to the osd, and therefore the osd may have been free
by the time __reset_osd() returns.  That function offers no
indication this may have occurred, and as a result the osd will
continue to be used even when it's no longer valid.

Change__reset_osd() so it returns an error (ENODEV) when it
deletes the osd being reset.  And change __kick_osd_requests() so it
returns immediately (before referencing osd again) if __reset_osd()
returns *any* error.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Sage Weil <sage@inktank.com>

In __unregister_request(), there is a call to list_del_init()
referencing a request that was the subject of a call to
ceph_osdc_put_request() on the previous line.  This is not
safe, because the request structure could have been freed
by the time we reach the list_del_init().

Fix this by reversing the order of these lines.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-off-by: Sage Weil <sage@inktank.com>

There is no check in rbd_remove() to see if anybody holds open the
image being removed.  That's not cool.

Add a simple open count that goes up and down with opens and closes
(releases) of the device, and don't allow an rbd image to be removed
if the count is non-zero.

Protect the updates of the open count value with ctl_mutex to ensure
the underlying rbd device doesn't get removed while concurrently
being opened.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Sage Weil <sage@inktank.com>

Function start_read() can get an error before processing all pages.
It must not only release the remaining pages, but unlock them too.

This fixes http://tracker.newdream.net/issues/3370Signed-off-by: David Zafman <david.zafman@inktank.com>
Reviewed-by: Alex Elder <elder@inktank.com>

If client sends cap message that requests new max size during
exporting caps, the exporting MDS will drop the message quietly.
So the client may wait for the reply that updates the max size
forever. call handle_cap_grant() for cap import message can
avoid this issue.
Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
Signed-off-by: Sage Weil <sage@inktank.com>

we should set i_truncate_pending to 0 after page cache is truncated
to i_truncate_size
Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
Signed-off-by: Sage Weil <sage@inktank.com>

Add dirty inode to cap_dirty_migrating list instead, this can avoid
ceph_flush_dirty_caps() entering infinite loop.
Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
Signed-off-by: Sage Weil <sage@inktank.com>

__wake_requests() will enter infinite loop if we use it to wake
requests in the session->s_waiting list. __wake_requests() deletes
requests from the list and __do_request() adds requests back to
the list.
Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
Signed-off-by: Sage Weil <sage@inktank.com>

The cap from non-auth mds doesn't have a meaningful max_size value.
Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
Signed-off-by: Sage Weil <sage@inktank.com>

__printf is useful to verify format and arguments.
Signed-off-by: Joe Perches <joe@perches.com>
Reviewed-by: Alex Elder <elder@inktank.com>

This would reset a connection with any OSD that had an outstanding
request that was taking more than N seconds.  The idea was that if the
OSD was buggy, the client could compensate by resending the request.

In reality, this only served to hide server bugs, and we haven't
actually seen such a bug in quite a while.  Moreover, the userspace
client code never did this.

More importantly, often the request is taking a long time because the
OSD is trying to recover, or overloaded, and killing the connection
and retrying would only make the situation worse by giving the OSD
more work to do.
Signed-off-by: Sage Weil <sage@inktank.com>
Reviewed-by: Alex Elder <elder@inktank.com>

dput() was not called in the error path.
Signed-off-by: Cyril Roelandt <tipecaml@gmail.com>
Reviewed-by: Alex Elder <elder@inktank.com>

ceph_aio_write() has an optimization that marks cap EPH_CAP_FILE_WR
dirty before data is copied to page cache and inode size is updated.
If ceph_check_caps() flushes the dirty cap before the inode size is
updated, MDS can miss the new inode size. The fix is move
ceph_{get,put}_cap_refs() into ceph_write_{begin,end}() and call
__ceph_mark_dirty_caps() after inode size is updated.
Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
Signed-off-by: Sage Weil <sage@inktank.com>

Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
Signed-off-by: Sage Weil <sage@inktank.com>

When a layered rbd image has a parent, that parent is identified
only by its pool id, image id, and snapshot id.  Images that have
been mapped also record *names* for those three id's.

Add code to look up these names for parent images so they match
mapped images more closely.  Skip doing this for an image if it
already has its pool name defined (this will be the case for images
mapped by the user).

It is possible that an the name of a parent image can't be
determined, even if the image id is valid.  If this occurs it
does not preclude correct operation, so don't treat this as
an error.

On the other hand, defined pools will always have both an id and a
name.   And any snapshot of an image identified as a parent for a
clone image will exist, and will have a name (if not it indicates
some other internal error).  So treat failure to get these bits
of information as errors.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>

Define and export function ceph_pg_pool_name_by_id() to supply
the name of a pg pool whose id is given.  This will be used by
the next patch.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>

Add support for getting the the information identifying the parent
image for rbd images that have them.  The child image holds a
reference to its parent image specification structure.  Create a new
entry "parent" in /sys/bus/rbd/image/N/ to report the identifying
information for the parent image, if any.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>

Format 2 parent images are partially identified by their image id,
but it may not be possible to determine their image name.  The name
is not strictly needed for correct operation, so we won't be
treating it as an error if we don't know it.  Handle this case
gracefully in rbd_name_show().
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>

We will know the image id for format 2 parent images, but won't
initially know its image name.  Avoid making the query for an image
id in rbd_dev_image_id() if it's already known.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>

Group the activities that now take place after an rbd_dev_probe()
call into a single function, and move the call to that function
into rbd_dev_probe() itself.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>

Encapsulate the creation/initialization and destruction of rbd
device structures.  The rbd_client and the rbd_spec structures
provided on creation hold references whose ownership is transferred
to the new rbd_device structure.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>

Group the allocation and initialization of fields of the rbd device
structure created in rbd_add().  Move the grouped code down later in
the function, just prior to the call to rbd_dev_probe().  This is
for the most part simple code movement.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>

The only reason rbd_dev is passed to rbd_get_client() is so its
rbd_client field can get assigned.  Instead, just return the
rbd_client pointer as a result and have the caller do the
assignment.

Change rbd_put_client() so it takes an rbd_client structure,
so follows the more typical symmetry with rbd_get_client().
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>

Pass the address of an rbd_spec structure to rbd_add_parse_args().
Use it to hold the information defining the rbd image to be mapped
in an rbd_add() call.

Use the result in the caller to initialize the rbd_dev->id field.

This means rbd_dev is no longer needed in rbd_add_parse_args(),
so get rid of it.

Now that this transformation of rbd_add_parse_args() is complete,
correct and expand on the its header documentation to reflect the
new reality.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>

With layered images we'll share rbd_spec structures, so add a
reference count to it.  It neatens up some code also.

A silly get/put pair is added to the alloc routine just to avoid
"defined but not used" warnings.  It will go away soon.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>

Group the fields that uniquely specify an rbd image into a new
reference-counted rbd_spec structure.  This structure will be used
to describe the desired image when mapping an image, and when
probing parent images in layered rbd devices.  Replace the set of
fields in the rbd device structure with a pointer to a dynamically
allocated rbd_spec.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>