- 27 Feb, 2020 23 commits
-
-
Taehee Yoo authored
rmnet_get_port() internally calls rcu_dereference_rtnl(), which checks RTNL. But rmnet_get_port() could be called by packet path. The packet path is not protected by RTNL. So, the suspicious RCU usage problem occurs. Test commands: modprobe rmnet ip netns add nst ip link add veth0 type veth peer name veth1 ip link set veth1 netns nst ip link add rmnet0 link veth0 type rmnet mux_id 1 ip netns exec nst ip link add rmnet1 link veth1 type rmnet mux_id 1 ip netns exec nst ip link set veth1 up ip netns exec nst ip link set rmnet1 up ip netns exec nst ip a a 192.168.100.2/24 dev rmnet1 ip link set veth0 up ip link set rmnet0 up ip a a 192.168.100.1/24 dev rmnet0 ping 192.168.100.2 Splat looks like: [ 146.630958][ T1174] WARNING: suspicious RCU usage [ 146.631735][ T1174] 5.6.0-rc1+ #447 Not tainted [ 146.632387][ T1174] ----------------------------- [ 146.633151][ T1174] drivers/net/ethernet/qualcomm/rmnet/rmnet_config.c:386 suspicious rcu_dereference_check() ! [ 146.634742][ T1174] [ 146.634742][ T1174] other info that might help us debug this: [ 146.634742][ T1174] [ 146.645992][ T1174] [ 146.645992][ T1174] rcu_scheduler_active = 2, debug_locks = 1 [ 146.646937][ T1174] 5 locks held by ping/1174: [ 146.647609][ T1174] #0: ffff8880c31dea70 (sk_lock-AF_INET){+.+.}, at: raw_sendmsg+0xab8/0x2980 [ 146.662463][ T1174] #1: ffffffff93925660 (rcu_read_lock_bh){....}, at: ip_finish_output2+0x243/0x2150 [ 146.671696][ T1174] #2: ffffffff93925660 (rcu_read_lock_bh){....}, at: __dev_queue_xmit+0x213/0x2940 [ 146.673064][ T1174] #3: ffff8880c19ecd58 (&dev->qdisc_running_key#7){+...}, at: ip_finish_output2+0x714/0x2150 [ 146.690358][ T1174] #4: ffff8880c5796898 (&dev->qdisc_xmit_lock_key#3){+.-.}, at: sch_direct_xmit+0x1e2/0x1020 [ 146.699875][ T1174] [ 146.699875][ T1174] stack backtrace: [ 146.701091][ T1174] CPU: 0 PID: 1174 Comm: ping Not tainted 5.6.0-rc1+ #447 [ 146.705215][ T1174] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 146.706565][ T1174] Call Trace: [ 146.707102][ T1174] dump_stack+0x96/0xdb [ 146.708007][ T1174] rmnet_get_port.part.9+0x76/0x80 [rmnet] [ 146.709233][ T1174] rmnet_egress_handler+0x107/0x420 [rmnet] [ 146.710492][ T1174] ? sch_direct_xmit+0x1e2/0x1020 [ 146.716193][ T1174] rmnet_vnd_start_xmit+0x3d/0xa0 [rmnet] [ 146.717012][ T1174] dev_hard_start_xmit+0x160/0x740 [ 146.717854][ T1174] sch_direct_xmit+0x265/0x1020 [ 146.718577][ T1174] ? register_lock_class+0x14d0/0x14d0 [ 146.719429][ T1174] ? dev_watchdog+0xac0/0xac0 [ 146.723738][ T1174] ? __dev_queue_xmit+0x15fd/0x2940 [ 146.724469][ T1174] ? lock_acquire+0x164/0x3b0 [ 146.725172][ T1174] __dev_queue_xmit+0x20c7/0x2940 [ ... ] Fixes: ceed73a2 ("drivers: net: ethernet: qualcomm: rmnet: Initial implementation") Signed-off-by:Taehee Yoo <ap420073@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Taehee Yoo authored
In the rmnet_changelink(), it uses IFLA_LINK without checking NULL pointer. tb[IFLA_LINK] could be NULL pointer. So, NULL-ptr-deref could occur. rmnet already has a lower interface (real_dev). So, after this patch, rmnet_changelink() does not use IFLA_LINK anymore. Test commands: modprobe rmnet ip link add dummy0 type dummy ip link add rmnet0 link dummy0 type rmnet mux_id 1 ip link set rmnet0 type rmnet mux_id 2 Splat looks like: [ 90.578726][ T1131] general protection fault, probably for non-canonical address 0xdffffc0000000000I [ 90.581121][ T1131] KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] [ 90.582380][ T1131] CPU: 2 PID: 1131 Comm: ip Not tainted 5.6.0-rc1+ #447 [ 90.584285][ T1131] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 90.587506][ T1131] RIP: 0010:rmnet_changelink+0x5a/0x8a0 [rmnet] [ 90.588546][ T1131] Code: 83 ec 20 48 c1 ea 03 80 3c 02 00 0f 85 6f 07 00 00 48 8b 5e 28 48 b8 00 00 00 00 00 0 [ 90.591447][ T1131] RSP: 0018:ffff8880ce78f1b8 EFLAGS: 00010247 [ 90.592329][ T1131] RAX: dffffc0000000000 RBX: 0000000000000000 RCX: ffff8880ce78f8b0 [ 90.593253][ T1131] RDX: 0000000000000000 RSI: ffff8880ce78f4a0 RDI: 0000000000000004 [ 90.594058][ T1131] RBP: ffff8880cf543e00 R08: 0000000000000002 R09: 0000000000000002 [ 90.594859][ T1131] R10: ffffffffc0586a40 R11: 0000000000000000 R12: ffff8880ca47c000 [ 90.595690][ T1131] R13: ffff8880ca47c000 R14: ffff8880cf545000 R15: 0000000000000000 [ 90.596553][ T1131] FS: 00007f21f6c7e0c0(0000) GS:ffff8880da400000(0000) knlGS:0000000000000000 [ 90.597504][ T1131] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 90.599418][ T1131] CR2: 0000556e413db458 CR3: 00000000c917a002 CR4: 00000000000606e0 [ 90.600289][ T1131] Call Trace: [ 90.600631][ T1131] __rtnl_newlink+0x922/0x1270 [ 90.601194][ T1131] ? lock_downgrade+0x6e0/0x6e0 [ 90.601724][ T1131] ? rtnl_link_unregister+0x220/0x220 [ 90.602309][ T1131] ? lock_acquire+0x164/0x3b0 [ 90.602784][ T1131] ? is_bpf_image_address+0xff/0x1d0 [ 90.603331][ T1131] ? rtnl_newlink+0x4c/0x90 [ 90.603810][ T1131] ? kernel_text_address+0x111/0x140 [ 90.604419][ T1131] ? __kernel_text_address+0xe/0x30 [ 90.604981][ T1131] ? unwind_get_return_address+0x5f/0xa0 [ 90.605616][ T1131] ? create_prof_cpu_mask+0x20/0x20 [ 90.606304][ T1131] ? arch_stack_walk+0x83/0xb0 [ 90.606985][ T1131] ? stack_trace_save+0x82/0xb0 [ 90.607656][ T1131] ? stack_trace_consume_entry+0x160/0x160 [ 90.608503][ T1131] ? deactivate_slab.isra.78+0x2c5/0x800 [ 90.609336][ T1131] ? kasan_unpoison_shadow+0x30/0x40 [ 90.610096][ T1131] ? kmem_cache_alloc_trace+0x135/0x350 [ 90.610889][ T1131] ? rtnl_newlink+0x4c/0x90 [ 90.611512][ T1131] rtnl_newlink+0x65/0x90 [ ... ] Fixes: 23790ef1 ("net: qualcomm: rmnet: Allow to configure flags for existing devices") Signed-off-by: -
Taehee Yoo authored
rmnet registers IFLA_LINK interface as a lower interface. But, IFLA_LINK could be NULL. In the current code, rmnet doesn't check IFLA_LINK. So, panic would occur. Test commands: modprobe rmnet ip link add rmnet0 type rmnet mux_id 1 Splat looks like: [ 36.826109][ T1115] general protection fault, probably for non-canonical address 0xdffffc0000000000I [ 36.838817][ T1115] KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] [ 36.839908][ T1115] CPU: 1 PID: 1115 Comm: ip Not tainted 5.6.0-rc1+ #447 [ 36.840569][ T1115] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 36.841408][ T1115] RIP: 0010:rmnet_newlink+0x54/0x510 [rmnet] [ 36.841986][ T1115] Code: 83 ec 18 48 c1 e9 03 80 3c 01 00 0f 85 d4 03 00 00 48 8b 6a 28 48 b8 00 00 00 00 00 c [ 36.843923][ T1115] RSP: 0018:ffff8880b7e0f1c0 EFLAGS: 00010247 [ 36.844756][ T1115] RAX: dffffc0000000000 RBX: ffff8880d14cca00 RCX: 1ffff11016fc1e99 [ 36.845859][ T1115] RDX: 0000000000000000 RSI: ffff8880c3d04000 RDI: 0000000000000004 [ 36.846961][ T1115] RBP: 0000000000000000 R08: ffff8880b7e0f8b0 R09: ffff8880b6ac2d90 [ 36.848020][ T1115] R10: ffffffffc0589a40 R11: ffffed1016d585b7 R12: ffffffff88ceaf80 [ 36.848788][ T1115] R13: ffff8880c3d04000 R14: ffff8880b7e0f8b0 R15: ffff8880c3d04000 [ 36.849546][ T1115] FS: 00007f50ab3360c0(0000) GS:ffff8880da000000(0000) knlGS:0000000000000000 [ 36.851784][ T1115] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 36.852422][ T1115] CR2: 000055871afe5ab0 CR3: 00000000ae246001 CR4: 00000000000606e0 [ 36.853181][ T1115] Call Trace: [ 36.853514][ T1115] __rtnl_newlink+0xbdb/0x1270 [ 36.853967][ T1115] ? lock_downgrade+0x6e0/0x6e0 [ 36.854420][ T1115] ? rtnl_link_unregister+0x220/0x220 [ 36.854936][ T1115] ? lock_acquire+0x164/0x3b0 [ 36.855376][ T1115] ? is_bpf_image_address+0xff/0x1d0 [ 36.855884][ T1115] ? rtnl_newlink+0x4c/0x90 [ 36.856304][ T1115] ? kernel_text_address+0x111/0x140 [ 36.856857][ T1115] ? __kernel_text_address+0xe/0x30 [ 36.857440][ T1115] ? unwind_get_return_address+0x5f/0xa0 [ 36.858063][ T1115] ? create_prof_cpu_mask+0x20/0x20 [ 36.858644][ T1115] ? arch_stack_walk+0x83/0xb0 [ 36.859171][ T1115] ? stack_trace_save+0x82/0xb0 [ 36.859710][ T1115] ? stack_trace_consume_entry+0x160/0x160 [ 36.860357][ T1115] ? deactivate_slab.isra.78+0x2c5/0x800 [ 36.860928][ T1115] ? kasan_unpoison_shadow+0x30/0x40 [ 36.861520][ T1115] ? kmem_cache_alloc_trace+0x135/0x350 [ 36.862125][ T1115] ? rtnl_newlink+0x4c/0x90 [ 36.864073][ T1115] rtnl_newlink+0x65/0x90 [ ... ] Fixes: ceed73a2 ("drivers: net: ethernet: qualcomm: rmnet: Initial implementation") Signed-off-by: -
Russell King authored
Don't attempt to interpret the PHY specific status register unless the PHY is indicating that the resolution is valid. Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Jiri Pirko authored
The current code causes problems when the unregistering netdevice could be different then the registering one. Since the check in mlx5_lag_netdev_event() does not allow any other network namespace anyway, fix this by registerting the lag notifier per init network namespace only. Fixes: d48834f9 ("mlx5: Use dev_net netdevice notifier registrations") Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Tested-by:
Aya Levin <ayal@mellanox.com> Acked-by:
Saeed Mahameed <saeedm@mellanox.com> Signed-off-by:
-
Tobias Klauser authored
Follow the pattern used with other *_show_fdinfo functions and only define unix_show_fdinfo and set it in proto_ops if CONFIG_PROCFS is set. Fixes: 3c32da19 ("unix: Show number of pending scm files of receive queue in fdinfo") Signed-off-by:
Tobias Klauser <tklauser@distanz.ch> Reviewed-by:
Kirill Tkhai <ktkhai@virtuozzo.com> Signed-off-by:
-
David S. Miller authored
Luo bin says: ==================== hinic: BugFixes the bug fixed in patch #2 has been present since the first commit. the bugs fixed in patch #1 and patch #3 have been present since the following commits: patch #1: 352f58b0 ("net-next/hinic: Set Rxq irq to specific cpu for NUMA") patch #3: 421e9526 ("hinic: add rss support") ==================== Signed-off-by:
-
Luo bin authored
should use real receive queue number to configure hw rss indirect table rather than maximal queue number Signed-off-by:
Luo bin <luobin9@huawei.com> Signed-off-by:
-
Luo bin authored
a reserved field is used to signify prime physical function index in the latest firmware version, so we must assign a value to it correctly Signed-off-by:
-
Luo bin authored
can not use a local variable as an input parameter of irq_set_affinity_hint Signed-off-by:
-
Karsten Graul authored
In smc_ib_remove_dev() check if the provided ib device was actually initialized for SMC before. Reported-by: syzbot+84484ccebdd4e5451d91@syzkaller.appspotmail.com Fixes: a4cf0443 ("smc: introduce SMC as an IB-client") Signed-off-by:
Karsten Graul <kgraul@linux.ibm.com> Signed-off-by:
-
Aaro Koskinen authored
We cannot register the same netdev notifier multiple times when probing stmmac devices. Register the notifier only once in module init, and also make debugfs creation/deletion safe against simultaneous notifier call. Fixes: 481a7d15 ("stmmac: debugfs entry name is not be changed when udev rename device name.") Signed-off-by:
Aaro Koskinen <aaro.koskinen@nokia.com> Signed-off-by:
-
Antoine Tenart authored
The firmware paths for the VSC8584 PHYs not not contain the leading 'microchip/' directory, as used in linux-firmware, resulting in an error when probing the driver. This patch fixes it. Fixes: a5afc167 ("net: phy: mscc: add support for VSC8584 PHY") Signed-off-by:
Antoine Tenart <antoine.tenart@bootlin.com> Reviewed-by:
-
Paolo Abeni authored
syzbot noted that the master MPTCP socket lacks the icsk_sync_mss callback, and was able to trigger a null pointer dereference: BUG: kernel NULL pointer dereference, address: 0000000000000000 PGD 8e171067 P4D 8e171067 PUD 93fa2067 PMD 0 Oops: 0010 [#1] PREEMPT SMP KASAN CPU: 0 PID: 8984 Comm: syz-executor066 Not tainted 5.6.0-rc2-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:0x0 Code: Bad RIP value. RSP: 0018:ffffc900020b7b80 EFLAGS: 00010246 RAX: 1ffff110124ba600 RBX: 0000000000000000 RCX: ffff88809fefa600 RDX: ffff8880994cdb18 RSI: 0000000000000000 RDI: ffff8880925d3140 RBP: ffffc900020b7bd8 R08: ffffffff870225be R09: fffffbfff140652a R10: fffffbfff140652a R11: 0000000000000000 R12: ffff8880925d35d0 R13: ffff8880925d3140 R14: dffffc0000000000 R15: 1ffff110124ba6ba FS: 0000000001a0b880(0000) GS:ffff8880aea00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffffffffffd6 CR3: 00000000a6d6f000 CR4: 00000000001406f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: cipso_v4_sock_setattr+0x34b/0x470 net/ipv4/cipso_ipv4.c:1888 netlbl_sock_setattr+0x2a7/0x310 net/netlabel/netlabel_kapi.c:989 smack_netlabel security/smack/smack_lsm.c:2425 [inline] smack_inode_setsecurity+0x3da/0x4a0 security/smack/smack_lsm.c:2716 security_inode_setsecurity+0xb2/0x140 security/security.c:1364 __vfs_setxattr_noperm+0x16f/0x3e0 fs/xattr.c:197 vfs_setxattr fs/xattr.c:224 [inline] setxattr+0x335/0x430 fs/xattr.c:451 __do_sys_fsetxattr fs/xattr.c:506 [inline] __se_sys_fsetxattr+0x130/0x1b0 fs/xattr.c:495 __x64_sys_fsetxattr+0xbf/0xd0 fs/xattr.c:495 do_syscall_64+0xf7/0x1c0 arch/x86/entry/common.c:294 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x440199 Code: 18 89 d0 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 fb 13 fc ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007ffcadc19e48 EFLAGS: 00000246 ORIG_RAX: 00000000000000be RAX: ffffffffffffffda RBX: 00000000004002c8 RCX: 0000000000440199 RDX: 0000000020000200 RSI: 00000000200001c0 RDI: 0000000000000003 RBP: 00000000006ca018 R08: 0000000000000003 R09: 00000000004002c8 R10: 0000000000000009 R11: 0000000000000246 R12: 0000000000401a20 R13: 0000000000401ab0 R14: 0000000000000000 R15: 0000000000000000 Modules linked in: CR2: 0000000000000000 Address the issue adding a dummy icsk_sync_mss callback. To properly sync the subflows mss and options list we need some additional infrastructure, which will land to net-next. Reported-by: syzbot+f4dfece964792d80b139@syzkaller.appspotmail.com Fixes: 2303f994 ("mptcp: Associate MPTCP context with TCP socket") Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Reviewed-by:
Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by:
-
Sudheesh Mavila authored
net: phy: corrected the return value for genphy_check_and_restart_aneg and genphy_c45_check_and_restart_aneg When auto-negotiation is not required, return value should be zero. Changes v1->v2: - improved comments and code as Andrew Lunn and Heiner Kallweit suggestion - fixed issue in genphy_c45_check_and_restart_aneg as Russell King suggestion. Fixes: 2a10ab04 ("net: phy: add genphy_check_and_restart_aneg()") Fixes: 1af9f168 ("net: phy: add genphy_c45_check_and_restart_aneg()") Signed-off-by:
Sudheesh Mavila <sudheesh.mavila@amd.com> Reviewed-by:
Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by:
-
yangerkun authored
As the description before netdev_run_todo, we cannot call free_netdev before rtnl_unlock, fix it by reorder the code. Signed-off-by:
yangerkun <yangerkun@huawei.com> Reviewed-by:
Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by:
-
Eric Dumazet authored
IPV6_ADDRFORM is able to transform IPv6 socket to IPv4 one. While this operation sounds illogical, we have to support it. One of the things it does for TCP socket is to switch sk->sk_prot to tcp_prot. We now have other layers playing with sk->sk_prot, so we should make sure to not interfere with them. This patch makes sure sk_prot is the default pointer for TCP IPv6 socket. syzbot reported : BUG: kernel NULL pointer dereference, address: 0000000000000000 PGD a0113067 P4D a0113067 PUD a8771067 PMD 0 Oops: 0010 [#1] PREEMPT SMP KASAN CPU: 0 PID: 10686 Comm: syz-executor.0 Not tainted 5.6.0-rc2-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:0x0 Code: Bad RIP value. RSP: 0018:ffffc9000281fce0 EFLAGS: 00010246 RAX: 1ffffffff15f48ac RBX: ffffffff8afa4560 RCX: dffffc0000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff8880a69a8f40 RBP: ffffc9000281fd10 R08: ffffffff86ed9b0c R09: ffffed1014d351f5 R10: ffffed1014d351f5 R11: 0000000000000000 R12: ffff8880920d3098 R13: 1ffff1101241a613 R14: ffff8880a69a8f40 R15: 0000000000000000 FS: 00007f2ae75db700(0000) GS:ffff8880aea00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffffffffffd6 CR3: 00000000a3b85000 CR4: 00000000001406f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: inet_release+0x165/0x1c0 net/ipv4/af_inet.c:427 __sock_release net/socket.c:605 [inline] sock_close+0xe1/0x260 net/socket.c:1283 __fput+0x2e4/0x740 fs/file_table.c:280 ____fput+0x15/0x20 fs/file_table.c:313 task_work_run+0x176/0x1b0 kernel/task_work.c:113 tracehook_notify_resume include/linux/tracehook.h:188 [inline] exit_to_usermode_loop arch/x86/entry/common.c:164 [inline] prepare_exit_to_usermode+0x480/0x5b0 arch/x86/entry/common.c:195 syscall_return_slowpath+0x113/0x4a0 arch/x86/entry/common.c:278 do_syscall_64+0x11f/0x1c0 arch/x86/entry/common.c:304 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x45c429 Code: ad b6 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 7b b6 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007f2ae75dac78 EFLAGS: 00000246 ORIG_RAX: 0000000000000036 RAX: 0000000000000000 RBX: 00007f2ae75db6d4 RCX: 000000000045c429 RDX: 0000000000000001 RSI: 000000000000011a RDI: 0000000000000004 RBP: 000000000076bf20 R08: 0000000000000038 R09: 0000000000000000 R10: 0000000020000180 R11: 0000000000000246 R12: 00000000ffffffff R13: 0000000000000a9d R14: 00000000004ccfb4 R15: 000000000076bf2c Modules linked in: CR2: 0000000000000000 ---[ end trace 82567b5207e87bae ]--- RIP: 0010:0x0 Code: Bad RIP value. RSP: 0018:ffffc9000281fce0 EFLAGS: 00010246 RAX: 1ffffffff15f48ac RBX: ffffffff8afa4560 RCX: dffffc0000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff8880a69a8f40 RBP: ffffc9000281fd10 R08: ffffffff86ed9b0c R09: ffffed1014d351f5 R10: ffffed1014d351f5 R11: 0000000000000000 R12: ffff8880920d3098 R13: 1ffff1101241a613 R14: ffff8880a69a8f40 R15: 0000000000000000 FS: 00007f2ae75db700(0000) GS:ffff8880aea00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffffffffffd6 CR3: 00000000a3b85000 CR4: 00000000001406f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Fixes: 604326b4 ("bpf, sockmap: convert to generic sk_msg interface") Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by: syzbot+1938db17e275e85dc328@syzkaller.appspotmail.com Cc: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by:
-
Ursula Braun authored
If an SMC connection to a certain peer is setup the first time, a new linkgroup is created. In case of setup failures, such a linkgroup is unusable and should disappear. As a first step the linkgroup is removed from the linkgroup list in smc_lgr_forget(). There are 2 problems: smc_listen_decline() might be called before linkgroup creation resulting in a crash due to calling smc_lgr_forget() with parameter NULL. If a setup failure occurs after linkgroup creation, the connection is never unregistered from the linkgroup, preventing linkgroup freeing. This patch introduces an enhanced smc_lgr_cleanup_early() function which * contains a linkgroup check for early smc_listen_decline() invocations * invokes smc_conn_free() to guarantee unregistering of the connection. * schedules fast linkgroup removal of the unusable linkgroup And the unused function smcd_conn_free() is removed from smc_core.h. Fixes: 3b2dec26 ("net/smc: restructure client and server code in af_smc") Fixes: 2a0674ff ("net/smc: improve abnormal termination of link groups") Signed-off-by:
Ursula Braun <ubraun@linux.ibm.com> Signed-off-by:
-
Nicolas Saenz Julienne authored
Outdated Raspberry Pi 4 firmware might configure the external PHY as rgmii although the kernel currently sets it as rgmii-rxid. This makes connections unreliable as ID_MODE_DIS is left enabled. To avoid this, explicitly clear that bit whenever we don't need it. Fixes: da388022 ("net: bcmgenet: Add RGMII_RXID support") Signed-off-by:
Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Acked-by:
-
Jiri Pirko authored
The put of the flags was added by the commit referenced in fixes tag, however the size of the message was not extended accordingly. Fix this by adding size of the flags bitfield to the message size. Fixes: e3822678 ("net: sched: update action implementations to support flags") Signed-off-by:
-
Madhuparna Bhowmik authored
list_for_each_entry_rcu() has built-in RCU and lock checking. Pass cond argument to list_for_each_entry_rcu() to silence false lockdep warning when CONFIG_PROVE_RCU_LIST is enabled. The devlink->lock is held when devlink_dpipe_table_find() is called in non RCU read side section. Therefore, pass struct devlink to devlink_dpipe_table_find() for lockdep checking. Signed-off-by:
Madhuparna Bhowmik <madhuparnabhowmik10@gmail.com> Reviewed-by:
-
Florian Fainelli authored
We are still experiencing some packet loss with the existing advanced congestion buffering (ACB) settings with the IMP port configured for 2Gb/sec, so revert to conservative link speeds that do not produce packet loss until this is resolved. Fixes: 8f1880cb ("net: dsa: bcm_sf2: Configure IMP port for 2Gb/sec") Fixes: de34d708 ("net: dsa: bcm_sf2: Only 7278 supports 2Gb/sec IMP port") Signed-off-by:
Vivien Didelot <vivien.didelot@gmail.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller authored
Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes: 1) Perform garbage collection from workqueue to fix rcu detected stall in ipset hash set types, from Jozsef Kadlecsik. 2) Fix the forceadd evaluation path, also from Jozsef. 3) Fix nft_set_pipapo selftest, from Stefano Brivio. 4) Crash when add-flush-add element in pipapo set, also from Stefano. Add test to cover this crash. 5) Remove sysctl entry under mutex in hashlimit, from Cong Wang. ==================== Signed-off-by:
-
- 26 Feb, 2020 7 commits
-
-
Jonathan Lemon authored
Add missing newlines to netdev_* format strings so the lines aren't buffered by the printk subsystem. Nitpicked-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
Jonathan Lemon <jonathan.lemon@gmail.com> Acked-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
-
Cong Wang authored
Before releasing the global mutex, we only unlink the hashtable from the hash list, its proc file is still not unregistered at this point. So syzbot could trigger a race condition where a parallel htable_create() could register the same file immediately after the mutex is released. Move htable_remove_proc_entry() back to mutex protection to fix this. And, fold htable_destroy() into htable_put() to make the code slightly easier to understand. Reported-and-tested-by: syzbot+d195fd3b9a364ddd6731@syzkaller.appspotmail.com Fixes: c4a3922d ("netfilter: xt_hashlimit: reduce hashlimit_mutex scope for htable_put()") Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org>
-
Michal Kubecek authored
Syzbot reported that ethnl_compact_sanity_checks() can be tricked into reading past the end of ETHTOOL_A_BITSET_VALUE and ETHTOOL_A_BITSET_MASK attributes and even the message by passing a value between (u32)(-31) and (u32)(-1) as ETHTOOL_A_BITSET_SIZE. The problem is that DIV_ROUND_UP(attr_nbits, 32) is 0 for such values so that zero length ETHTOOL_A_BITSET_VALUE will pass the length check but ethnl_bitmap32_not_zero() check would try to access up to 512 MB of attribute "payload". Prevent this overflow byt limiting the bitset size. Technically, compact bitset format would allow bitset sizes up to almost 2^18 (so that the nest size does not exceed U16_MAX) but bitsets used by ethtool are much shorter. S16_MAX, the largest value which can be directly used as an upper limit in policy, should be a reasonable compromise. Fixes: 10b518d4 ("ethtool: netlink bitset handling") Reported-by: syzbot+7fd4ed5b4234ab1fdccd@syzkaller.appspotmail.com Reported-by: syzbot+709b7a64d57978247e44@syzkaller.appspotmail.com Reported-by: syzbot+983cb8fb2d17a7af549d@syzkaller.appspotmail.com Signed-off-by:
Michal Kubecek <mkubecek@suse.cz> Signed-off-by:
-
Amritha Nambiar authored
Fixes the lower and upper bounds when there are multiple TCs and traffic is on the the same TC on the same device. The lower bound is represented by 'qoffset' and the upper limit for hash value is 'qcount + qoffset'. This gives a clean Rx to Tx queue mapping when there are multiple TCs, as the queue indices for upper TCs will be offset by 'qoffset'. v2: Fixed commit description based on comments. Fixes: 1b837d48 ("net: Revoke export for __skb_tx_hash, update it to just be static skb_tx_hash") Fixes: eadec877 ("net: Add support for subordinate traffic classes to netdev_pick_tx") Signed-off-by:
Amritha Nambiar <amritha.nambiar@intel.com> Reviewed-by:
Alexander Duyck <alexander.h.duyck@linux.intel.com> Reviewed-by:
Sridhar Samudrala <sridhar.samudrala@intel.com> Signed-off-by:
-
Stefano Brivio authored
Add a specific test for the crash reported by Phil Sutter and addressed in the previous patch. The test cases that, in my intention, should have covered these cases, that is, the ones from the 'concurrency' section, don't run these sequences tightly enough and spectacularly failed to catch this. While at it, define a convenient way to add these kind of tests, by adding a "reported issues" test section. It's more convenient, for this particular test, to execute the set setup in its own function. However, future test cases like this one might need to call setup functions, and will typically need no tools other than nft, so allow for this in check_tools(). The original form of the reproducer used here was provided by Phil. Reported-by:
Phil Sutter <phil@nwl.cc> Signed-off-by:
Stefano Brivio <sbrivio@redhat.com> Signed-off-by:
-
Stefano Brivio authored
Phil reports that adding elements, flushing and re-adding them right away: nft add table t '{ set s { type ipv4_addr . inet_service; flags interval; }; }' nft add element t s '{ 10.0.0.1 . 22-25, 10.0.0.1 . 10-20 }' nft flush set t s nft add element t s '{ 10.0.0.1 . 10-20, 10.0.0.1 . 22-25 }' triggers, almost reliably, a crash like this one: [ 71.319848] general protection fault, probably for non-canonical address 0x6f6b6e696c2e756e: 0000 [#1] PREEMPT SMP PTI [ 71.321540] CPU: 3 PID: 1201 Comm: kworker/3:2 Not tainted 5.6.0-rc1-00377-g2bb07f4e #192 [ 71.322746] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ?-20190711_202441-buildvm-armv7-10.arm.fedoraproject.org-2.fc31 04/01/2014 [ 71.324430] Workqueue: events nf_tables_trans_destroy_work [nf_tables] [ 71.325387] RIP: 0010:nft_set_elem_destroy+0xa5/0x110 [nf_tables] [ 71.326164] Code: 89 d4 84 c0 74 0e 8b 77 44 0f b6 f8 48 01 df e8 41 ff ff ff 45 84 e4 74 36 44 0f b6 63 08 45 84 e4 74 2c 49 01 dc 49 8b 04 24 <48> 8b 40 38 48 85 c0 74 4f 48 89 e7 4c 8b [ 71.328423] RSP: 0018:ffffc9000226fd90 EFLAGS: 00010282 [ 71.329225] RAX: 6f6b6e696c2e756e RBX: ffff88813ab79f60 RCX: ffff88813931b5a0 [ 71.330365] RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffff88813ab79f9a [ 71.331473] RBP: ffff88813ab79f60 R08: 0000000000000008 R09: 0000000000000000 [ 71.332627] R10: 000000000000021c R11: 0000000000000000 R12: ffff88813ab79fc2 [ 71.333615] R13: ffff88813b3adf50 R14: dead000000000100 R15: ffff88813931b8a0 [ 71.334596] FS: 0000000000000000(0000) GS:ffff88813bd80000(0000) knlGS:0000000000000000 [ 71.335780] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 71.336577] CR2: 000055ac683710f0 CR3: 000000013a222003 CR4: 0000000000360ee0 [ 71.337533] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 71.338557] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 71.339718] Call Trace: [ 71.340093] nft_pipapo_destroy+0x7a/0x170 [nf_tables_set] [ 71.340973] nft_set_destroy+0x20/0x50 [nf_tables] [ 71.341879] nf_tables_trans_destroy_work+0x246/0x260 [nf_tables] [ 71.342916] process_one_work+0x1d5/0x3c0 [ 71.343601] worker_thread+0x4a/0x3c0 [ 71.344229] kthread+0xfb/0x130 [ 71.344780] ? process_one_work+0x3c0/0x3c0 [ 71.345477] ? kthread_park+0x90/0x90 [ 71.346129] ret_from_fork+0x35/0x40 [ 71.346748] Modules linked in: nf_tables_set nf_tables nfnetlink 8021q [last unloaded: nfnetlink] [ 71.348153] ---[ end trace 2eaa8149ca759bcc ]--- [ 71.349066] RIP: 0010:nft_set_elem_destroy+0xa5/0x110 [nf_tables] [ 71.350016] Code: 89 d4 84 c0 74 0e 8b 77 44 0f b6 f8 48 01 df e8 41 ff ff ff 45 84 e4 74 36 44 0f b6 63 08 45 84 e4 74 2c 49 01 dc 49 8b 04 24 <48> 8b 40 38 48 85 c0 74 4f 48 89 e7 4c 8b [ 71.350017] RSP: 0018:ffffc9000226fd90 EFLAGS: 00010282 [ 71.350019] RAX: 6f6b6e696c2e756e RBX: ffff88813ab79f60 RCX: ffff88813931b5a0 [ 71.350019] RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffff88813ab79f9a [ 71.350020] RBP: ffff88813ab79f60 R08: 0000000000000008 R09: 0000000000000000 [ 71.350021] R10: 000000000000021c R11: 0000000000000000 R12: ffff88813ab79fc2 [ 71.350022] R13: ffff88813b3adf50 R14: dead000000000100 R15: ffff88813931b8a0 [ 71.350025] FS: 0000000000000000(0000) GS:ffff88813bd80000(0000) knlGS:0000000000000000 [ 71.350026] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 71.350027] CR2: 000055ac683710f0 CR3: 000000013a222003 CR4: 0000000000360ee0 [ 71.350028] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 71.350028] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 71.350030] Kernel panic - not syncing: Fatal exception [ 71.350412] Kernel Offset: disabled [ 71.365922] ---[ end Kernel panic - not syncing: Fatal exception ]--- which is caused by dangling elements that have been deactivated, but never removed. On a flush operation, nft_pipapo_walk() walks through all the elements in the mapping table, which are then deactivated by nft_flush_set(), one by one, and added to the commit list for removal. Element data is then freed. On transaction commit, nft_pipapo_remove() is called, and failed to remove these elements, leading to the stale references in the mapping. The first symptom of this, revealed by KASan, is a one-byte use-after-free in subsequent calls to nft_pipapo_walk(), which is usually not enough to trigger a panic. When stale elements are used more heavily, though, such as double-free via nft_pipapo_destroy() as in Phil's case, the problem becomes more noticeable. The issue comes from that fact that, on a flush operation, nft_pipapo_remove() won't get the actual key data via elem->key, elements to be deleted upon commit won't be found by the lookup via pipapo_get(), and removal will be skipped. Key data should be fetched via nft_set_ext_key(), instead. Reported-by: -
git://blackhole.kfki.hu/nfPablo Neira Ayuso authored
Jozsef Kadlecsik says: ==================== ipset patches for nf The first one is larger than usual, but the issue could not be solved simpler. Also, it's a resend of the patch I submitted a few days ago, with a one line fix on top of that: the size of the comment extensions was not taken into account at reporting the full size of the set. - Fix "INFO: rcu detected stall in hash_xxx" reports of syzbot by introducing region locking and using workqueue instead of timer based gc of timed out entries in hash types of sets in ipset. - Fix the forceadd evaluation path - the bug was also uncovered by the syzbot. ==================== Signed-off-by:
-
- 25 Feb, 2020 2 commits
-
-
Jason A. Donenfeld authored
The icmpv6_send function has long had a static inline implementation with an empty body for CONFIG_IPV6=n, so that code calling it doesn't need to be ifdef'd. The new icmpv6_ndo_send function, which is intended for drivers as a drop-in replacement with an identical function signature, should follow the same pattern. Without this patch, drivers that used to work with CONFIG_IPV6=n now result in a linker error. Cc: Chen Zhou <chenzhou10@huawei.com> Reported-by:
Hulk Robot <hulkci@huawei.com> Fixes: 0b41713b ("icmp: introduce helper for nat'd source address in network device context") Signed-off-by:
Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by:
-
Stefano Brivio authored
Before nftables commit fb9cea50e8b3 ("main: enforce options before commands"), 'nft list ruleset -a' happened to work, but it's wrong and won't work anymore. Replace it by 'nft -a list ruleset'. Reported-by:Chen Yi <yiche@redhat.com> Fixes: 611973c1 ("selftests: netfilter: Introduce tests for sets with range concatenation") Signed-off-by:
-
- 24 Feb, 2020 8 commits
-
-
David S. Miller authored
Merge tag 'mac80211-for-net-2020-02-24' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg ==================== A few fixes: * remove a double mutex-unlock * fix a leak in an error path * NULL pointer check * include if_vlan.h where needed * avoid RCU list traversal when not under RCU ==================== Signed-off-by:
-
Nikolay Aleksandrov authored
In br_dev_xmit() we perform vlan filtering in br_allowed_ingress() but if the packet has the vlan header inside (e.g. bridge with disabled tx-vlan-offload) then the vlan filtering code will use skb_vlan_untag() to extract the vid before filtering which in turn calls pskb_may_pull() and we may end up with a stale eth pointer. Moreover the cached eth header pointer will generally be wrong after that operation. Remove the eth header caching and just use eth_hdr() directly, the compiler does the right thing and calculates it only once so we don't lose anything. Fixes: 057658cb ("bridge: suppress arp pkts on BR_NEIGH_SUPPRESS ports") Signed-off-by:
Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by:
-
David S. Miller authored
Esben Haabendal says: ==================== net: ll_temac: Bugfixes Fix a number of bugs which have been present since the first commit. The bugs fixed in patch 1,2 and 4 have all been observed in real systems, and was relatively easy to reproduce given an appropriate stress setup. Changes since v1: - Changed error handling of of dma_map_single() in temac_start_xmit() to drop packet instead of returning NETDEV_TX_BUSY. ==================== Signed-off-by: -
Esben Haabendal authored
The SDMA engine used by TEMAC halts operation when it has finished processing of the last buffer descriptor in the buffer ring. Unfortunately, no interrupt event is generated when this happens, so we need to setup another mechanism to make sure DMA operation is restarted when enough buffers have been added to the ring. Fixes: 92744989 ("net: add Xilinx ll_temac device driver") Signed-off-by:
Esben Haabendal <esben@geanix.com> Signed-off-by:
-
Esben Haabendal authored
Failures caused by GFP_ATOMIC memory pressure have been observed, and due to the missing error handling, results in kernel crash such as [1876998.350133] kernel BUG at mm/slub.c:3952! [1876998.350141] invalid opcode: 0000 [#1] PREEMPT SMP PTI [1876998.350147] CPU: 2 PID: 0 Comm: swapper/2 Not tainted 5.3.0-scnxt #1 [1876998.350150] Hardware name: N/A N/A/COMe-bIP2, BIOS CCR2R920 03/01/2017 [1876998.350160] RIP: 0010:kfree+0x1ca/0x220 [1876998.350164] Code: 85 db 74 49 48 8b 95 68 01 00 00 48 31 c2 48 89 10 e9 d7 fe ff ff 49 8b 04 24 a9 00 00 01 00 75 0b 49 8b 44 24 08 a8 01 75 02 <0f> 0b 49 8b 04 24 31 f6 a9 00 00 01 00 74 06 41 0f b6 74 24 5b [1876998.350172] RSP: 0018:ffffc900000f0df0 EFLAGS: 00010246 [1876998.350177] RAX: ffffea00027f0708 RBX: ffff888008d78000 RCX: 0000000000391372 [1876998.350181] RDX: 0000000000000000 RSI: ffffe8ffffd01400 RDI: ffff888008d78000 [1876998.350185] RBP: ffff8881185a5d00 R08: ffffc90000087dd8 R09: 000000000000280a [1876998.350189] R10: 0000000000000002 R11: 0000000000000000 R12: ffffea0000235e00 [1876998.350193] R13: ffff8881185438a0 R14: 0000000000000000 R15: ffff888118543870 [1876998.350198] FS: 0000000000000000(0000) GS:ffff88811f300000(0000) knlGS:0000000000000000 [1876998.350203] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 s#1 Part1 [1876998.350206] CR2: 00007f8dac7b09f0 CR3: 000000011e20a006 CR4: 00000000001606e0 [1876998.350210] Call Trace: [1876998.350215] <IRQ> [1876998.350224] ? __netif_receive_skb_core+0x70a/0x920 [1876998.350229] kfree_skb+0x32/0xb0 [1876998.350234] __netif_receive_skb_core+0x70a/0x920 [1876998.350240] __netif_receive_skb_one_core+0x36/0x80 [1876998.350245] process_backlog+0x8b/0x150 [1876998.350250] net_rx_action+0xf7/0x340 [1876998.350255] __do_softirq+0x10f/0x353 [1876998.350262] irq_exit+0xb2/0xc0 [1876998.350265] do_IRQ+0x77/0xd0 [1876998.350271] common_interrupt+0xf/0xf [1876998.350274] </IRQ> In order to handle such failures more graceful, this change splits the receive loop into one for consuming the received buffers, and one for allocating new buffers. When GFP_ATOMIC allocations fail, the receive will continue with the buffers that is still there, and with the expectation that the allocations will succeed in a later call to receive. Fixes: 92744989 ("net: add Xilinx ll_temac device driver") Signed-off-by:
-
Esben Haabendal authored
This adds error handling to the remaining dma_map_single() calls, so that behavior is well defined if/when we run out of DMA memory. Fixes: 92744989 ("net: add Xilinx ll_temac device driver") Signed-off-by:
-
Esben Haabendal authored
It is possible that the interrupt handler fires and frees up space in the TX ring in between checking for sufficient TX ring space and stopping the TX queue in temac_start_xmit. If this happens, the queue wake from the interrupt handler will occur before the queue is stopped, causing a lost wakeup and the adapter's transmit hanging. To avoid this, after stopping the queue, check again whether there is sufficient space in the TX ring. If so, wake up the queue again. This is a port of the similar fix in axienet driver, commit 7de44285 ("net: axienet: Fix race condition causing TX hang"). Fixes: 23ecc4bd ("net: ll_temac: fix checksum offload logic") Signed-off-by:
-
Madhuparna Bhowmik authored
local->sta_mtx is held in __ieee80211_check_fast_rx_iface(). No need to use list_for_each_entry_rcu() as it also requires a cond argument to avoid false lockdep warnings when not used in RCU read-side section (with CONFIG_PROVE_RCU_LIST). Therefore use list_for_each_entry(); Signed-off-by:
Johannes Berg <johannes.berg@intel.com>
-
