- 09 Feb, 2007 22 commits
-
-
Richard Purdie authored
This patch adds ASoC support for the WM9712 codec. Supported features:- o Capture/Playback/Sidetone/Bypass. o Aux DAC. o 8k - 48k sample rates. o DAPM. Signed-off-by:
Richard Purdie <rpurdie@rpsys.net> Signed-off-by:
Liam Girdwood <liam.girdwood@wolfsonmicro.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
Jaroslav Kysela <perex@suse.cz>
-
Richard Purdie authored
This patch adds ASoC support for the WM8750 codec. Supported features:- o Capture/Playback/Sidetone/Bypass. o 16 & 24 bit audio. o 8k - 96k sample rates. o DAPM. Signed-off-by:
-
Richard Purdie authored
This patch adds ASoC support for the WM8731 codec. Supported features:- o Capture/Playback/Sidetone/Bypass. o 16 & 24 bit audio. o 8k - 96k sample rates. o DAPM. Signed-off-by:
-
Liam Girdwood authored
This patch adds documentation describing the ASoC architecture and a maintainer entry for ASoC. The documentation includes the following files:- codec.txt: Codec driver internals. DAI.txt: Description of Digital Audio Interface standards and how to configure a DAI within your codec and CPU DAI drivers. dapm.txt: Dynamic Audio Power Management. platform.txt: Platform audio DMA and DAI. machine.txt: Machine driver internals. pop_clicks.txt: How to minimise audio artifacts. clocking.txt: ASoC clocking for best power performance. Signed-off-by:
-
Liam Girdwood authored
This patch adds support for building the ASoC core and the dynamic audio power management support. Signed-off-by:
-
Richard Purdie authored
This patch adds Dynamic Audio Power Management (DAPM) to ASoC. Dynamic Audio Power Management (DAPM) is designed to allow portable and handheld Linux devices to use the minimum amount of power within the audio subsystem at all times. It is independent of other kernel PM and as such, can easily co-exist with the other PM systems. DAPM is also completely transparent to all user space applications as all power switching is done within the ASoC core. No code changes or recompiling are required for user space applications. DAPM makes power switching decisions based upon any audio stream (capture/playback) activity and audio mixer settings within the device. DAPM spans the whole machine. It covers power control within the entire audio subsystem, this includes internal codec power blocks and machine level power systems. There are 4 power domains within DAPM:- 1. Codec domain - VREF, VMID (core codec and audio power) Usually controlled at codec probe/remove and suspend/resume, although can be set at stream time if power is not needed for sidetone, etc. 2. Platform/Machine domain - physically connected inputs and outputs Is platform/machine and user action specific, is configured by the machine driver and responds to asynchronous events e.g when HP are inserted 3. Path domain - audio subsystem signal paths Automatically set when mixer and mux settings are changed by the user. e.g. alsamixer, amixer. 4. Stream domain - DAC's and ADC's. Enabled and disabled when stream playback/capture is started and stopped respectively. e.g. aplay, arecord. All DAPM power switching decisions are made automatically by consulting an audio routing map of the whole machine. This map is specific to each machine and consists of the interconnections between every audio component (including internal codec components). Signed-off-by:
-
Frank Mandarino authored
This patch is the core of ASoC functionality. The ASoC core is designed to provide the following features :- o Codec independence. Allows reuse of codec drivers on other platforms and machines. o Platform driver code reuse. Reuse of platform specific audio DMA and DAI drivers on different machines. o Easy I2S/PCM digital audio interface configuration between codec and SoC. Each SoC interface and codec registers their audio interface capabilities with the core at initialisation. The capabilities are subsequently matched and configured at run time for best power and performance when the application hw params are known. o Machine specific controls/operations: Allow machines to add controls and operations to the audio subsystem. e.g. volume control for speaker amp. To achieve all this, ASoC splits an embedded audio system into 3 components :- 1. Codec driver: The codec driver is platform independent and contains audio controls, audio interface capabilities, codec dapm and codec IO functions. 2. Platform driver: The platform driver contains the audio dma engine and audio interface drivers (e.g. I2S, AC97, PCM) for that platform. 3. Machine driver: The machine driver handles any machine specific controls and audio events. i.e. turning on an amp at start of playback. Signed-off-by:
Frank Mandarino <fmandarino@endrelia.com> Signed-off-by:
-
Richard Purdie authored
This patch adds the ASoC and DAPM headers. Features:- o Defines Digital Audio Interface (DAI) API o Defines Codec, Platform and Machine API o Defines Dynamic Audio Power Management API Signed-off-by:
-
Takashi Iwai authored
Use pci_iomap and ioread*/iowrite*() functions for accessing hardwares. pci_iomap is suitable for hardwares like ICH and compatible that have both PIO and MMIO. Signed-off-by:
-
Jaroslav Kysela authored
Users ask us many times about the maximum DMA size for PCM devices. This file gives them a hint in KB. Signed-off-by: -
Jaroslav Kysela authored
See ALSA bug#2481 . Signed-off-by: -
Takashi Iwai authored
Fixed a compile warning regarding print format for size_t. Signed-off-by:
-
Johannes Berg authored
This patch converts most uses of list_for_each to list_for_each_entry all across alsa. In some place apparently an item can be on a list with different pointers so of course that isn't compatible with list_for_each, I therefore didn't touch those places. Signed-off-by:
Johannes Berg <johannes@sipsolutions.net> Signed-off-by:
-
Johannes Berg authored
This patch changes i2sbus_attach_codec to implement a proper error handling strategy using labels to jump to the right part. Since it has an elaborate set-up sequence it also needs that tear-down, which I had hard-coded inbetween all the checks. This increases readability and should reduce .text size as well. Signed-off-by:
-
Johannes Berg authored
This patch makes a few whitespace cleanups and makes i2sbus assign the new struct device pointer in struct snd_pcm so that the proper device symlink shows up in sysfs. Signed-off-by:
-
Johannes Berg authored
This patch adds a struct device pointer to struct snd_pcm in order to be able to give it a different device than the card. It defaults to the card's device, however, so it should behave identically for drivers not touching the field. Signed-off-by:
-
Johannes Berg authored
This patch adds snd_register_device_for_dev taking a struct device pointer to link the new device to and makes snd_register_device a simple static inline wrapper around it. Signed-off-by:
-
Jochen Voss authored
Enable the analog loopback of the Revolution 5.1 card. This patch adds support for the PT2258 volume controller and modifies the Revolution 5.1 driver to make use of this facility. This allows to control the analog loopback of the card. Signed-off-by:
Jochen Voss <voss@seehuhn.de> Signed-off-by:
-
Jochen Voss authored
Enable capture from line-in and CD on the Revolution 5.1 card. This patch adds support for switching between the 5 input channels of the AK5365 ADC and modifies the Revolution 5.1 driver to make use of this facility. Previously the capture channel was fixed to channel 0 (microphone on the Revolution 5.1 card). Signed-off-by:
-
Clemens Ladisch authored
Add pause capabilities for both USB playback and capture streams. Signed-off-by:
Clemens Ladisch <clemens@ladisch.de> Signed-off-by:
-
Clemens Ladisch authored
The hardware information structures for playback and capture streams, respectively, are the same, so we can use just one structure for both streams. Signed-off-by:
-
James Courtier-Dutton authored
Signed-off-by:
James Courtier-Dutton <James@superbug.co.uk> Signed-off-by:
-
- 08 Feb, 2007 18 commits
-
-
Linus Torvalds authored
* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/mfasheh/ocfs2: (22 commits) configfs: Zero terminate data in configfs attribute writes. [PATCH] ocfs2 heartbeat: clean up bio submission code ocfs2: introduce sc->sc_send_lock to protect outbound outbound messages [PATCH] ocfs2: drop INET from Kconfig, not needed ocfs2_dlm: Add timeout to dlm join domain ocfs2_dlm: Silence some messages during join domain ocfs2_dlm: disallow a domain join if node maps mismatch ocfs2_dlm: Ensure correct ordering of set/clear refmap bit on lockres ocfs2: Binds listener to the configured ip address ocfs2_dlm: Calling post handler function in assert master handler ocfs2: Added post handler callable function in o2net message handler ocfs2_dlm: Cookies in locks not being printed correctly in error messages ocfs2_dlm: Silence a failed convert ocfs2_dlm: wake up sleepers on the lockres waitqueue ocfs2_dlm: Dlm dispatch was stopping too early ocfs2_dlm: Drop inflight refmap even if no locks found on the lockres ocfs2_dlm: Flush dlm workqueue before starting to migrate ocfs2_dlm: Fix migrate lockres handler queue scanning ocfs2_dlm: Make dlmunlock() wait for migration to complete ocfs2_dlm: Fixes race between migrate and dirty ...
-
Linus Torvalds authored
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/driver-2.6: Revert "Driver core: convert SPI code to use struct device"
-
Linus Torvalds authored
* master.kernel.org:/pub/scm/linux/kernel/git/paulus/powerpc: (116 commits) [POWERPC] Add export of vgacon_remap_base [POWERPC] Remove bogus comment about page_is_ram [POWERPC] windfarm: don't die on suspend thread signal [POWERPC] Fix comment in kernel/irq.c [POWERPC] ppc: Fix booke watchdog initialization [POWERPC] PPC: Use ARRAY_SIZE macro when appropriate [POWERPC] Use ARRAY_SIZE macro when appropriate [POWERPC] Fix ppc64's writing to struct file_operations [POWERPC] ppc: use syslog macro for the printk log level [POWERPC] ppc: cs4218_tdm remove extra brace [POWERPC] Add mpc52xx/lite5200 PCI support [POWERPC] Only use H_BULK_REMOVE if the firmware supports it [POWERPC] Fixup error handling when emulating a floating point instruction [POWERPC] Enable interrupts if we are doing fp math emulation [POWERPC] Added kprobes support to ppc32 [POWERPC] Make pSeries use the H_BULK_REMOVE hypervisor call [POWERPC] Clear RI bit in MSR before restoring r13 when returning to userspace [POWERPC] Fix performance monitor exception [POWERPC] Compile fixes for arch/powerpc dcr code [POWERPC] Maple: use mmio nvram ...
-
Linus Torvalds authored
* 'drm-patches' of master.kernel.org:/pub/scm/linux/kernel/git/airlied/drm-2.6: drm: Allow for 44 bit user-tokens (or drm_file offsets) drm/via: Disable AGP DMA for chips with the new 3D engine. drm: update core memory manager from git drm tree drm: remove drm_ioremap and drm_ioremapfree i810/i830: use drm_core_ioremap instead of drm_ioremap drm: use vmalloc_user instead of vmalloc_32 for DRM_SHM via: allow for npot texture pitch alignment via: add some new chipsets via: some PCI posting flushes
-
Linus Torvalds authored
Michal Ostrowski points out what the real problem was: the spaces at the start of the definition of the 'checker-shell' make function. Cc: Michal Ostrowski <mostrows@watson.ibm.com> Acked-by:
David Miller <davem@davemloft.net> Acked-by:
Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Acked-by:
Oleg Verych <olecom@flower.upol.cz> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Greg Kroah-Hartman authored
This reverts commit 2943ecf2. This should go through the SPI maintainer, it was my fault that it did not. Especially as it conflicts with other patches he has pending. Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Thomas Hellstrom authored
-
Mathieu Desnoyers authored
The following macro : include/asm-powerpc/vga.h:#define VGA_MAP_MEM(x,s) (x + vgacon_remap_base) is used by drivers/video/console/vgacon.c which can be compiled as a module (drivers/video/vga16fb.ko). Therefore, vgacon_remap_base should be exported. Signed-off-by:
Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Signed-off-by:
Paul Mackerras <paulus@samba.org>
-
Johannes Berg authored
arch/powerpc/mm/mem.c states that page_is_ram is called by the code that implements /dev/mem, which isn't true. Remove the comment. Signed-off-by:
-
Johannes Berg authored
When the windfarm thread gets a suspend signal it will die instead of freezing. This fixes it. Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
-
Johannes Berg authored
kernel/irq.c contains a comment that speaks of -1 and -2 as interrupt numbers, but this is actually dependent on configuration options now. Replace by NO_IRQ and NO_IRQ_ENABLED. Signed-off-by:
-
Stefan Roese authored
Fix two problems in the book-e watchdog driver. a) The 4xx default period was defined wrong b) Clear status before enabling the watchdog exception Signed-off-by:
Stefan Roese <sr@denx.de> Signed-off-by:
-
Ahmed S. Darwish authored
Use ARRAY_SIZE macro already defined in linux/kernel.h Signed-off-by:
Ahmed S. Darwish <darwish.07@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by:
Kumar Gala <galak@gate.crashing.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Ahmed S. Darwish authored
Use ARRAY_SIZE macro already defined in linux/kernel.h Signed-off-by:
-
Stephen Rothwell authored
In preparation for marking file_operations as const. Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by:
Arjan van de Ven <arjan@infradead.org> Signed-off-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
-
Robert P. J. Day authored
Use the appropriate logging macro for the priority level for that printk call. Signed-off-by:
Robert P. J. Day <rpjday@mindspring.com> Signed-off-by:
-
Mariusz Kozlowski authored
Signed-off-by:
Mariusz Kozlowski <m.kozlowski@tuxland.pl> Signed-off-by:
-
Grant Likely authored
Signed-off-by:
Grant Likely <grant.likely@secretlab.ca> Acked-by:
Sylvain Munaut <tnt@246tNt.com> Signed-off-by:
-
