- 30 Nov, 2015 16 commits
-
-
David Hildenbrand authored
Let's always set and clear the sda when enabling/disabling a VCPU. Dealing with sda being set to something else makes no sense anymore as we enable a VCPU in the SCA now after it has been registered at the VM. Signed-off-by:
David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by:
Christian Borntraeger <borntraeger@de.ibm.com>
-
David Hildenbrand authored
If something goes wrong in kvm_arch_vcpu_create, the VCPU has already been added to the sca but will never be removed. Trying to create VCPUs with duplicate ids (e.g. after a failed attempt) is problematic. Also, when creating multiple VCPUs in parallel, we could theoretically forget to set the correct SCA when the switch to ESCA happens just before the VCPU is registered. Let's add the VCPU to the SCA in kvm_arch_vcpu_postcreate, where we can be sure that no duplicate VCPU with the same id is around and the VCPU has already been registered at the VM. We also have to make sure to update ECB at that point. Signed-off-by:
-
David Hildenbrand authored
Having no sca can never happen, even when something goes wrong when switching to ESCA. Otherwise we would have a serious bug. Let's remove this superfluous check. Acked-by:
Dominik Dingel <dingel@linux.vnet.ibm.com> Signed-off-by:
-
David Hildenbrand authored
If CPUSTAT_ECALL_PEND isn't set, we can't have an external call pending, so we can directly avoid taking the lock. Acked-by:
-
Eugene (jno) Dvurechenski authored
This patch allows s390 to have more than 64 VCPUs for a guest (up to 248 for memory usage considerations), if supported by the underlaying hardware (sclp.has_esca). Signed-off-by:
Eugene (jno) Dvurechenski <jno@linux.vnet.ibm.com> Signed-off-by:
-
Eugene (jno) Dvurechenski authored
This patch adds code that performs transparent switch to Extended SCA on addition of 65th VCPU in a VM. Disposal of ESCA is added too. The entier ESCA functionality, however, is still not enabled. The enablement will be provided in a separate patch. This patch also uses read/write lock protection of SCA and its subfields for possible disposal at the BSCA-to-ESCA transition. While only Basic SCA needs such a protection (for the swap), any SCA access is now guarded. Signed-off-by:
-
Eugene (jno) Dvurechenski authored
This patch updates the routines (sca_*) to provide transparent access to and manipulation on the data for both Basic and Extended SCA in use. The kvm.arch.sca is generalized to (void *) to handle BSCA/ESCA cases. Also the kvm.arch.use_esca flag is provided. The actual functionality is kept the same. Signed-off-by:
-
Eugene (jno) Dvurechenski authored
This patch adds new structures and updates some existing ones to provide the base for Extended SCA functionality. The old sca_* structures were renamed to bsca_* to keep things uniform. The access to fields of SIGP controls were turned into bitfields instead of hardcoded bitmasks. Signed-off-by:
-
Eugene (jno) Dvurechenski authored
This patch provides SCA-aware helpers to create/delete a VCPU. This is to prepare for upcoming introduction of Extended SCA support. Signed-off-by:
-
Eugene (jno) Dvurechenski authored
This patch generalizes access to the SIGP controls, which is a part of SCA. This is to prepare for upcoming introduction of Extended SCA support. Signed-off-by:
-
Eugene (jno) Dvurechenski authored
This patch generalizes access to the IPTE controls, which is a part of SCA. This is to prepare for upcoming introduction of Extended SCA support. Signed-off-by:
-
Eugene (jno) Dvurechenski authored
Introduce sclp.has_hvs and sclp.has_esca to provide a way for kvm to check whether the extended-SCA and the home-virtual-SCA facilities are available. Signed-off-by:
-
David Hildenbrand authored
Let's rewrite this function to better reflect how we actually handle exit_code. By dropping out early we can save a few cycles. This especially speeds up sie exits caused by host irqs. Also, let's move the special -EOPNOTSUPP for intercepts to the place where it belongs and convert it to -EREMOTE. Reviewed-by:
Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by:
-
Janosch Frank authored
KVM creates debugfs files to export VM statistics to userland. To be able to remove them on kvm exit it tracks the files' dentries. Since their parent directory is also tracked and since each parent direntry knows its children we can easily remove them by using debugfs_remove_recursive(kvm_debugfs_dir). Therefore we don't need the extra tracking in the kvm_stats_debugfs_item anymore. Signed-off-by:
Janosch Frank <frankja@linux.vnet.ibm.com> Reviewed-By:
Sascha Silbe <silbe@linux.vnet.ibm.com> Acked-by:
-
David Hildenbrand authored
Usually, VCPU ids match the array index. So let's try a fast lookup first before falling back to the slow iteration. Suggested-by:
-
David Hildenbrand authored
Let's reuse the new common function for VPCU lookup by id. Reviewed-by:
-
- 26 Nov, 2015 3 commits
-
-
Takuya Yoshikawa authored
Signed-off-by:
Takuya Yoshikawa <yoshikawa_takuya_b1@lab.ntt.co.jp> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Takuya Yoshikawa authored
As kvm_mmu_get_page() was changed so that every parent pointer would not get into the sp->parent_ptes chain before the entry pointed to by it was set properly, we can use the for_each_rmap_spte macro instead of pte_list_walk(). Signed-off-by:
-
Takuya Yoshikawa authored
Every time kvm_mmu_get_page() is called with a non-NULL parent_pte argument, link_shadow_page() follows that to set the parent entry so that the new mapping will point to the returned page table. Moving parent_pte handling there allows to clean up the code because parent_pte is passed to kvm_mmu_get_page() just for mark_unsync() and mmu_page_add_parent_pte(). In addition, the patch avoids calling mark_unsync() for other parents in the sp->parent_ptes chain than the newly added parent_pte, because they have been there since before the current page fault handling started. Signed-off-by:
-
- 25 Nov, 2015 21 commits
-
-
Takuya Yoshikawa authored
Make kvm_mmu_alloc_page() do just what its name tells to do, and remove the extra allocation error check and zero-initialization of parent_ptes: shadow page headers allocated by kmem_cache_zalloc() are always in the per-VCPU pools. Signed-off-by:
-
Takuya Yoshikawa authored
At some call sites of rmap_get_first() and rmap_get_next(), BUG_ON is placed right after the call to detect unrelated sptes which must not be found in the reverse-mapping list. Move this check in rmap_get_first/next() so that all call sites, not just the users of the for_each_rmap_spte() macro, will be checked the same way. One thing to keep in mind is that kvm_mmu_unlink_parents() also uses rmap_get_first() to handle parent sptes. The change will not break it because parent sptes are present, at least until drop_parent_pte() actually unlinks them, and not mmio-sptes. Signed-off-by:
-
Takuya Yoshikawa authored
is_rmap_spte(), originally named is_rmap_pte(), was introduced when the simple reverse mapping was implemented by commit cd4a4e53 ("[PATCH] KVM: MMU: Implement simple reverse mapping"). At that point, its role was clear and only rmap_add() and rmap_remove() were using it to select sptes that need to be reverse-mapped. Independently of that, is_shadow_present_pte() was first introduced by commit c7addb90 ("KVM: Allow not-present guest page faults to bypass kvm") to do bypass_guest_pf optimization, which does not exist any more. These two seem to have changed their roles somewhat, and is_rmap_spte() just calls is_shadow_present_pte() now. Since using both of them without clear distinction just makes the code confusing, remove is_rmap_spte(). Signed-off-by:
-
Takuya Yoshikawa authored
mmu_set_spte()'s code is based on the assumption that the emulate parameter has a valid pointer value if set_spte() returns true and write_fault is not zero. In other cases, emulate may be NULL, so a NULL-check is needed. Stop passing emulate pointer and make mmu_set_spte() return the emulate value instead to clean up this complex interface. Prefetch functions can just throw away the return value. Signed-off-by:
-
Takuya Yoshikawa authored
Both __mmu_unsync_walk() and mmu_pages_clear_parents() have three line code which clears a bit in the unsync child bitmap; the former places it inside a loop block and uses a few goto statements to jump to it. A new helper function, clear_unsync_child_bit(), makes the code cleaner. Signed-off-by:
-
Takuya Yoshikawa authored
Signed-off-by:
-
Takuya Yoshikawa authored
New struct kvm_rmap_head makes the code type-safe to some extent. Signed-off-by:
-
Yaowei Bai authored
In another patch kvm_is_visible_gfn is maken return bool due to this function only returns zero or one as its return value, let's also make kvmppc_visible_gpa return bool to keep consistent. No functional change. Signed-off-by:
Yaowei Bai <baiyaowei@cmss.chinamobile.com> Signed-off-by:
-
Yaowei Bai authored
This patch makes kvm_para_has_feature return bool due to this particular function only using either one or zero as its return value. No functional change. Signed-off-by:
-
Yaowei Bai authored
This patch makes kvm_is_visible_gfn return bool due to this particular function only using either one or zero as its return value. No functional change. Signed-off-by:
-
Markus Elfring authored
The kmem_cache_destroy() function tests whether its argument is NULL and then returns immediately. Thus the test around the call is not needed. This issue was detected by using the Coccinelle software. Signed-off-by:
Markus Elfring <elfring@users.sourceforge.net> Signed-off-by:
-
Paolo Bonzini authored
Commit 7a1638ce ("nEPT: Redefine EPT-specific link_shadow_page()", 2013-08-05) says: Since nEPT doesn't support A/D bit, we should not set those bit when building the shadow page table. but this is not necessary. Even though nEPT doesn't support A/D bits, and hence the vmcs12 EPT pointer will never enable them, we always use them for shadow page tables if available (see construct_eptp in vmx.c). So we can set the A/D bits freely in the shadow page table. This patch hence basically reverts commit 7a1638ce. Cc: Yang Zhang <yang.z.zhang@Intel.com> Cc: Takuya Yoshikawa <yoshikawa_takuya_b1@lab.ntt.co.jp> Signed-off-by:
-
Paolo Bonzini authored
Poor #AC was so unimportant until a few days ago that we were not even tracing its name correctly. But now it's all over the place. Cc: stable@vger.kernel.org Signed-off-by: -
Paolo Bonzini authored
RDTSCP was never supported for AMD CPUs, which nobody noticed because Linux does not use it. But exactly the fact that Linux does not use it makes the implementation very simple; we can freely trash MSR_TSC_AUX while running the guest. Cc: Joerg Roedel <joro@8bytes.org> Signed-off-by: -
Paolo Bonzini authored
If we do not do this, it is not properly saved and restored across migration. Windows notices due to its self-protection mechanisms, and is very upset about it (blue screen of death). Cc: Radim Krcmar <rkrcmar@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: -
Andrey Smetanin authored
A new vcpu exit is introduced to notify the userspace of the changes in Hyper-V SynIC configuration triggered by guest writing to the corresponding MSRs. Changes v4: * exit into userspace only if guest writes into SynIC MSR's Changes v3: * added KVM_EXIT_HYPERV types and structs notes into docs Signed-off-by:
Andrey Smetanin <asmetanin@virtuozzo.com> Reviewed-by:
Roman Kagan <rkagan@virtuozzo.com> Signed-off-by:
Denis V. Lunev <den@openvz.org> CC: Gleb Natapov <gleb@kernel.org> CC: Paolo Bonzini <pbonzini@redhat.com> CC: Roman Kagan <rkagan@virtuozzo.com> CC: Denis V. Lunev <den@openvz.org> CC: qemu-devel@nongnu.org Signed-off-by:
-
Andrey Smetanin authored
SynIC (synthetic interrupt controller) is a lapic extension, which is controlled via MSRs and maintains for each vCPU - 16 synthetic interrupt "lines" (SINT's); each can be configured to trigger a specific interrupt vector optionally with auto-EOI semantics - a message page in the guest memory with 16 256-byte per-SINT message slots - an event flag page in the guest memory with 16 2048-bit per-SINT event flag areas The host triggers a SINT whenever it delivers a new message to the corresponding slot or flips an event flag bit in the corresponding area. The guest informs the host that it can try delivering a message by explicitly asserting EOI in lapic or writing to End-Of-Message (EOM) MSR. The userspace (qemu) triggers interrupts and receives EOM notifications via irqfd with resampler; for that, a GSI is allocated for each configured SINT, and irq_routing api is extended to support GSI-SINT mapping. Changes v4: * added activation of SynIC by vcpu KVM_ENABLE_CAP * added per SynIC active flag * added deactivation of APICv upon SynIC activation Changes v3: * added KVM_CAP_HYPERV_SYNIC and KVM_IRQ_ROUTING_HV_SINT notes into docs Changes v2: * do not use posted interrupts for Hyper-V SynIC AutoEOI vectors * add Hyper-V SynIC vectors into EOI exit bitmap * Hyper-V SyniIC SINT msr write logic simplified Signed-off-by:
-
Andrey Smetanin authored
The decision on whether to use hardware APIC virtualization used to be taken globally, based on the availability of the feature in the CPU and the value of a module parameter. However, under certain circumstances we want to control it on per-vcpu basis. In particular, when the userspace activates HyperV synthetic interrupt controller (SynIC), APICv has to be disabled as it's incompatible with SynIC auto-EOI behavior. To achieve that, introduce 'apicv_active' flag on struct kvm_vcpu_arch, and kvm_vcpu_deactivate_apicv() function to turn APICv off. The flag is initialized based on the module parameter and CPU capability, and consulted whenever an APICv-specific action is performed. Signed-off-by:
-
Andrey Smetanin authored
The function to determine if the vector is handled by ioapic used to rely on the fact that only ioapic-handled vectors were set up to cause vmexits when virtual apic was in use. We're going to break this assumption when introducing Hyper-V synthetic interrupts: they may need to cause vmexits too. To achieve that, introduce a new bitmap dedicated specifically for ioapic-handled vectors, and populate EOI exit bitmap from it for now. Signed-off-by:
-
Andrey Smetanin authored
Actually kvm_arch_irq_routing_update() should be kvm_arch_post_irq_routing_update() as it's called at the end of irq routing update. This renaming frees kvm_arch_irq_routing_update function name. kvm_arch_irq_routing_update() weak function which will be used to update mappings for arch-specific irq routing entries (in particular, the upcoming Hyper-V synthetic interrupts). Signed-off-by:
-
Haozhong Zhang authored
This patch removes the vpid check when emulating nested invvpid instruction of type all-contexts invalidation. The existing code is incorrect because: (1) According to Intel SDM Vol 3, Section "INVVPID - Invalidate Translations Based on VPID", invvpid instruction does not check vpid in the invvpid descriptor when its type is all-contexts invalidation. (2) According to the same document, invvpid of type all-contexts invalidation does not require there is an active VMCS, so/and get_vmcs12() in the existing code may result in a NULL-pointer dereference. In practice, it can crash both KVM itself and L1 hypervisors that use invvpid (e.g. Xen). Signed-off-by:Haozhong Zhang <haozhong.zhang@intel.com> Signed-off-by:
-
