- 23 Sep, 2006 2 commits
-
-
malahal@us.ibm.com authored
Signed-off-by:
Malahal Naineni <malahal@us.ibm.com> Signed-off-by:
James Bottomley <James.Bottomley@SteelEye.com>
-
Alexis Bruemmer authored
This patch removes the reliance on FLASH Manufacture IDs for validation. Signed-off-by:
Alexis Bruemmer <alexisb@us.ibm.com> Signed-off-by:
-
- 12 Sep, 2006 2 commits
-
-
Henrik Kretzschmar authored
Changes obsolete typedef'd Scsi_Cmnd to struct scsi_cmnd. Signed-off-by:
Henrik Kretzschmar <henne@nachtwindheim.de> Signed-off-by:
-
Daniel Walker authored
LD .tmp_vmlinux1 drivers/built-in.o(.text+0x8e1f9): In function `scsi_device_put': drivers/scsi/scsi.c:887: undefined reference to `module_refcount' make: *** [.tmp_vmlinux1] Error 1 There are only two users of module_refcount() outside of kernel/module.c and the other one uses ifdef's similar to this. Signed-Off-By:
Daniel Walker <dwalker@mvista.com> Signed-off-by:
-
- 07 Sep, 2006 7 commits
-
-
James Bottomley authored
CONFIG_SCSI_NETLINK can become a bool since the item its selecting (CONFIG_NET) cannot be a module. Signed-off-by: -
James Bottomley authored
This patch implements the ability to set the minimum and maximum linkrates for both libsas (for expanders) and aic94xx (for the host phys). It also tidies up the setting of the hardware min and max to make sure they're updated when the expander emits a change broadcast. Signed-off-by: -
James Bottomley authored
According to SPEC, the minimum_linkrate and maximum_linkrate should be settable by the user. This patch introduces a callback that allows the sas class to pass these settings on to the driver. Signed-off-by: -
James Bottomley authored
At the moment we have two separate linkspeed enumerations covering roughly the same values. This patch consolidates on a single one enum sas_linkspeed in scsi_transport_sas.h and uses it everywhere in the aic94xx driver. Eventually I'll get around to removing the duplicated fields in asd_sas_phy and sas_phy ... Signed-off-by: -
Henrik Kretzschmar authored
Signed-off-by:
-
James Bottomley authored
The recent change to the way scsi_device_get()/put() work broke the non modular build (we do a module_refcount on a NULL). Fix this by checking for non-null before checking module_refcount(). Signed-off-by: -
James Bottomley authored
Spotted by: Dan Aloni <da-xx@monatomic.org> The problem is there's inconsistent locking semantic usage of scsi_alloc_target(). Two callers assume the target comes back with reference unincremented and the third assumes its incremented. Fix by always making the reference incremented on return. Also fix path in target alloc that could consistently increment the parent lock. Finally document scsi_alloc_target() so its callers know what the expectations are. Signed-off-by:
-
- 05 Sep, 2006 4 commits
-
-
James Smart authored
Change version number to 8.1.10 Signed-off-by:
James Smart <James.Smart@emulex.com> Signed-off-by:
-
James Smart authored
Add support for a new lpfc soft_wwpn sysfs attribute Signed-off-by:
-
James Smart authored
Add support for new dev_loss_tmo callback Goodness is that it removes code for a parallel nodev timer that existed in the driver Add support for the new fast_io_fail callback Signed-off-by:
-
James Smart authored
This patch adds the following functionality to the FC transport: - dev_loss_tmo LLDD callback : Called to essentially confirm the deletion of an rport. Thus, it is called whenever the dev_loss_tmo fires, or when the rport is deleted due to other circumstances (module unload, etc). It is expected that the callback will initiate the termination of any outstanding i/o on the rport. - fast_io_fail_tmo and LLD callback: There are some cases where it may take a long while to truly determine device loss, but the system is in a multipathing configuration that if the i/o was failed quickly (faster than dev_loss_tmo), it could be redirected to a different path and completed sooner. Many thanks to Mike Reed who cleaned up the initial RFC in support of this post. The original RFC is at: http://marc.theaimsgroup.com/?l=linux-scsi&m=115505981027246&w=2Signed-off-by:
-
- 02 Sep, 2006 21 commits
-
-
James Smart authored
Add support to return adapter symbolic name (now that attribute is dynamic) Signed-off-by:
-
James Smart authored
Add support to post events via new FC event interfaces Signed-off-by:
-
James Smart authored
During discussions with Mike Christie, I became convinced that we needed a larger vendor id. This patch extends the id from 32 to 64 bits. This applies on top of the prior patches that add SCSI transport events via netlink. Signed-off-by:
-
James Smart authored
This patch formally adds support for the posting of FC events via netlink. It is a followup to the original RFC at: http://marc.theaimsgroup.com/?l=linux-scsi&m=114530667923464&w=2 and the initial posting at: http://marc.theaimsgroup.com/?l=linux-scsi&m=115507374832500&w=2 The patch has been updated to optimize the send path, per the discussions in the initial posting. Per discussions at the Storage Summit and at OLS, we are to use netlink for async events from transports. Also per discussions, to avoid a netlink protocol per transport, I've create a single NETLINK_SCSITRANSPORT protocol, which can then be used by all transports. This patch: - Creates new files scsi_netlink.c and scsi_netlink.h, which contains the single and shared definitions for the SCSI Transport. It is tied into the base SCSI subsystem intialization. Contains a single interface routine, scsi_send_transport_event(), for a transport to send an event (via multicast to a protocol specific group). - Creates a new scsi_netlink_fc.h file, which contains the FC netlink event messages - Adds 3 new routines to the fc transport: fc_get_event_number() - to get a FC event # fc_host_post_event() - to send a simple FC event (32 bits of data) fc_host_post_vendor_event() - to send a Vendor unique event, with arbitrary amounts of data. Note: the separation of event number allows for a LLD to send a standard event, followed by vendor-specific data for the event. Note: This patch assumes 2 prior fc transport patches have been installed: http://marc.theaimsgroup.com/?l=linux-scsi&m=115555807316329&w=2 http://marc.theaimsgroup.com/?l=linux-scsi&m=115581614930261&w=2 Sorry - next time I'll do something like making these individual patches of the same posting when I know they'll be posted closely together. Signed-off-by:
-
James Bottomley authored
And use it in the stex driver. Signed-off-by: -
Ed Lin authored
Use block shared tags entirely within the driver. In the case of shutdown, assume that there are no other outstanding commands, so tag 0 is fine. Signed-off-by:
Ed Lin <ed.lin@promise.com> Signed-off-by:
-
Jeff Garzik authored
Add Promise SuperTrak 'stex' driver, supporting SuperTrak EX8350/8300/16350/16300 controllers. The controller's firmware accepts SCSI commands, handing them to the underlying RAID or JBOD disks. The driver consisted of the following cleanups and fixes, beyond its initial submission: Ed Lin: stex: cleanup and minor fixes stex: add new device ids stex: update internal copy code path stex: add hard reset function stex: adjust command timeout in slave_config routine stex: use more efficient method for unload/shutdown flush Jeff Garzik: [SCSI] Add Promise SuperTrak 'shasta' driver. Rename drivers/scsi/shasta.c to stex.c ("SuperTrak EX"). [SCSI] stex: update with community comments from 'Promise SuperTrak' thread [SCSI] stex: Fix warning, trim trailing whitespace. [SCSI] stex: remove last remnants of "shasta" project code name [SCSI] stex: removed 6-byte command emulation [SCSI] stex: minor cleanups [SCSI] stex: minor fixes: irq flag, error return value [SCSI] stex: use dma_alloc_coherent() Signed-off-by:Jeff Garzik <jeff@garzik.org> Signed-off-by:
-
Hannes Reinecke authored
When accessing a device with disabled read access the capacity is set randomly to 1GB. This makes it impossible to userspace tools to detect invalid device capacities. Signed-off-by:
Mike Anderson <andmike@us.ibm.com> Acked-by:
Chris Mason <mason@suse.com> Signed-off-by:
Hannes Reinecke <hare@suse.de> Signed-off-by:
-
Mike Christie authored
Signed-off-by:
Mike Christie <michaelc@cs.wisc.edu> Signed-off-by:
-
Mike Christie authored
In the normal IO path we should not be calling back into the LLD since the LLD will have cleaned up the task before or after calling complete pdu. For the fail_command path we still need to do this to force the cleanup. Signed-off-by:
-
Mike Christie authored
If the scsi eh sends a TUR and the session is down we could return SCSI_ML_HOST_BUSY. scsi eh will ignore this and send ask us to abort the command and we blindly accesst the command ptr. Signed-off-by:
-
Mike Christie authored
When a digest is spread across two network buffers, we currently ignore this and try to check the digest with the partial buffer. Or course this fails. This patch has use iscsi_tcp_copy to copy the whole digest before testing it. Signed-off-by:
-
Mike Christie authored
The first burst length is only relevant if immedate data = Yes or if Initial R2T is No Signed-off-by:
-
Mike Christie authored
When we relogin to a target, we have not yet negotiated digests so we must reset the hdr_size var. Signed-off-by:
-
Mike Christie authored
This patch built over the last ones fixes a bug in the partial header resend code, where we add on another 4 bytes to the send length on the resend. We want just the header plus digest. Signed-off-by:
-
Mike Christie authored
We currently allocated seperate tfms for data and header digests. There is no reason for this since we can never calculate a rx header and digest at the same time. Same for sends. So this patch removes the data tfms and has the send and recv sides use the rx_tfm or tx_tfm. I also made the connection creation code preallocate the tfms because I thought I hit a bug where I changed the digests settings during a relogin but could not allocate the tfm and then we just failed. Signed-off-by:
-
Mike Christie authored
iscsi_tcp calculates padding by using the expected transfer length. This has the problem where if we have immediate data = no and initial R2T = yes, and the transfer length ended up needing padding then we send: 1. header 2. padding which should have gone after data 3. data Besides this bug, we also assume the target will always ask for nice transfer lengths and the first burst length will always be a nice value. As far as I can tell form the RFC this is not a requirement. It would be silly to do this, but if someone did it we will end doing bad things. Finally the last bug in that bit of code is in our handling of the recalculation of data digests when we do not send a whole iscsi_buf in one try. The bug here is that we call crypto_digest_final on a iscsi_sendpage error, then when we send the rest of the iscsi_buf, we doiscsi_data_digest_init and this causes the previous data digest to be lost. And to make matters worse, some of these bugs are replicated over and over and over again for immediate data, solicited data and unsolicited data. So the attached patch made over the iscsi git tree (see kernel.org/git for details) which I updated today to include the patches I said I merged, consolidates the sending of data, padding and digests and calculation of data digests and fixes the above bugs. Signed-off-by:
-
Mike Christie authored
A couple targets like string bean and MDS, send r2ts with a data len greater than the max burst we agreed to. We were being strict in our enforcing of the iscsi rfc in that code path, but there is no driver limitation that prevents us from fullfilling the request. To allow those targets to work we will ignore the max_burst length and send as much data as the target asks for assuming it has consciously decided to override its max burst length. Signed-off-by:
-
Mike Christie authored
It is possible that a ctask could be completing and getting cleaned up at the same time, we are finishing up the last data transfer. This could then result in the data transfer code using stale or invalid values. This patch adds a refcount to the ctask. When the count goes to zero then we know the transmit thread and recv thread or softirq are not touching it and we can safely release it. The eh should not need to grab a reference because it only cleans up a task if it has both the xmit mutex and recv lock (or recv side suspended). Signed-off-by:
-
Mike Christie authored
iSCSI RFC states that the first burst length must be smaller than the max burst length. We currently assume targets will be good, but that may not be the case, so this patch adds a check. This patch also moves the unsol data out offset to the lib so the LLDs do not have to track it. Signed-off-by:
-
Alan Stern authored
Sanitize the Vendor, Product, and Revision strings contained in an INQUIRY result by setting all non-graphic or non-ASCII characters to ' '. Since the standard disallows such characters, this will affect only non-compliant devices. To help maintain backward compatibility, NUL characters are treated specially. They are taken as string terminators; they and all the following characters are set to ' '. If some valid characters get erased as a result... well, we weren't seeing them before so we haven't lost anything. The primary purpose of this change is to allow blacklist entries to match devices with illegal Vendor or Product strings. In addition, the patch updates a couple of function prototypes, giving inq_result its correct type (unsigned char *). Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
-
- 01 Sep, 2006 1 commit
-
-
James Bottomley authored
The fix isn't actually in sd: it's in scsi_device_get(). I modified it to allow devices to be returned in SDEV_CANCEL, but not SDEV_DEL. This means that the device_remove_driver, which occurs in device_del() in scsi_remove_device() after the device has gone into SDEV_CANCEL is now effective at flushing the cache. Signed-off-by:
-
- 31 Aug, 2006 2 commits
-
-
James Bottomley authored
This patch adds support for sharing tag maps at the host level (i.e. either every queue [LUN] has its own tag map or there's a single one for the entire host). This formulation is primarily intended to help single issue queue hardware, like the aic7xxx Signed-off-by: -
James Bottomley authored
The current block queue implementation already contains most of the machinery for shared tag maps. The only remaining pieces are a way to allocate and destroy a tag map independently of the queues (so that the maps can be managed on the life cycle of the overseeing entity) Acked-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
- 30 Aug, 2006 1 commit
-
-
Darrick J. Wong authored
This patch sets can_queue in the aic94xx driver's scsi_host to better performing values than what's there currently. It seems that asd_ha->seq.can_queue reflects the number of requests that can be queued per controller; so long as there's one scsi_host per controller, it seems logical that the scsi_host ought to have the same can_queue value. To the best of my (still limited) knowledge, this method provides the correct value. The effect of leaving this value set to 1 is terrible performance in the case of either (a) certain Maxtor SAS drives flying solo or (b) flooding several disks with I/O simultaneously (md-raid). There may be more scenarios where we see similar problems that I haven't uncovered. Signed-off-by:
Darrick J. Wong <djwong@us.ibm.com> Signed-off-by:
-
