- 11 May, 2013 6 commits
-
-
David Jeffery authored
commit ce8a5dbd upstream. When checking if an autofs mount point is busy it isn't sufficient to only check if it's a mount point. For example, if the mount of an offset mountpoint in a tree is denied for this host by its export and the dentry becomes a process working directory the check incorrectly returns the mount as not in use at expire. This can happen since the default when mounting within a tree is nostrict, which means ingnore mount fails on mounts within the tree and continue. The nostrict option is meant to allow mounting in this case. Signed-off-by:
David Jeffery <djeffery@redhat.com> Signed-off-by:
Ian Kent <raven@themaw.net> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Axel Lin authored
commit 563861cd upstream. The logic to check return value of clk_enable() and clk_prepare() is reversed, fix it. Signed-off-by:
Axel Lin <axel.lin@ingics.com> Acked-by:
Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by:
Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by:
-
Vaidyanathan Srinivasan authored
commit 7122beee upstream. The following commit breaks numa distance setup for old powerpc systems that use form0 encoding in device tree. commit 41eab6f8 powerpc/numa: Use form 1 affinity to setup node distance Device tree node /rtas/ibm,associativity-reference-points would index into /cpus/PowerPCxxxx/ibm,associativity based on form0 or form1 encoding detected by ibm,architecture-vec-5 property. All modern systems use form1 and current kernel code is correct. However, on older systems with form0 encoding, the numa distance will get hard coded as LOCAL_DISTANCE for all nodes. This causes task scheduling anomaly since scheduler will skip building numa level domain (topmost domain with all cpus) if all numa distances are same. (value of 'level' in sched_init_numa() will remain 0) Prior to the above commit: ((from) == (to) ? LOCAL_DISTANCE : REMOTE_DISTANCE) Restoring compatible behavior with this patch for old powerpc systems with device tree where numa distance are encoded as form0. Signed-off-by:
Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com> Signed-off-by:
Michael Ellerman <michael@ellerman.id.au> Signed-off-by:
-
Michael Neuling authored
commit c2fd22df upstream. Make sure that current->thread.reg exists before we deference it in flush_hash_page. Signed-off-by:
Michael Neuling <mikey@neuling.org> Reported-by:
John J Miller <millerjo@us.ibm.com> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
-
Anton Blanchard authored
commit 73d2fb75 upstream. POWER8 allows read and write of the DSCR in userspace. We added kernel emulation so applications could always use the instructions regardless of the CPU type. Unfortunately there are two SPRs for the DSCR and we only added emulation for the privileged one. Add code to match the non privileged one. A simple test was created to verify the fix: http://ozlabs.org/~anton/junkcode/user_dscr_test.c Without the patch we get a SIGILL and it passes with the patch. Signed-off-by:
Anton Blanchard <anton@samba.org> Signed-off-by:
-
Stefano Stabellini authored
commit 2798ba7d upstream. Signed-off-by:
Stefano Stabellini <stefano.stabellini@eu.citrix.com> Reviewed-by:
Ian Campbell <ian.camjpbell@citrix.com> Signed-off-by:
-
- 08 May, 2013 34 commits
-
-
Greg Kroah-Hartman authored
-
Lars-Peter Clausen authored
commit c6cc25fd upstream. The adp5520 unfortunately also clears the BL_EN bit when the nSTNDBY bit is cleared. So we need to make sure to restore it during resume if it was set before suspend. Signed-off-by:
Lars-Peter Clausen <lars@metafoo.de> Acked-by:
Michael Hennerich <michael.hennerich@analog.com> Signed-off-by:
Samuel Ortiz <sameo@linux.intel.com> Signed-off-by:
-
Al Viro authored
commit 7ee2b9e5 upstream. Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Terry Barnaby authored
commit bdbc5d0c upstream. The driver is doing, by default, multi-block reads. When a block error occurs, card/block.c instigates a single block read: "mmcblk0: retrying using single block read". It leaves the sg chain intact and just changes the length attribute for the first sg entry and the overall sg_len parameter. When atmci_read_data_pio is called to read the single block of data it ignores the sg_len and expects to read more than 512 bytes as it sees there are multiple items in the sg list. No more data comes as the controller has only been commanded to get one block. Signed-off-by:
Terry Barnaby <terry@beam.ltd.uk> Acked-by:
Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by:
Chris Ball <cjb@laptop.org> Signed-off-by:
-
Philip Rakity authored
commit 836dc2fe upstream. PARTITION_SUPPORT needs to be set before doing the compare on version number so the bit width test does not get invalid data. Before this patch, a Sandisk iNAND eMMC card would detect 1-bit width although the hardware supports 4-bit. Only affects old emmc devices - pre 4.4 devices. Reported-by:
Elad Yi <elad.yi@gmail.com> Signed-off-by:
Philip Rakity <prakity@yahoo.com> Signed-off-by:
-
Li Fei authored
commit f7b0e105 upstream. With the current implementation, kstat_cpu(cpu).irqs_sum is also increased in case of irq_mis_count increment. So there is no need to count irq_mis_count in arch_irq_stat, otherwise irq_mis_count will be counted twice in the sum of /proc/stat. Reported-by:
Liu Chuansheng <chuansheng.liu@intel.com> Signed-off-by:
Li Fei <fei.li@intel.com> Acked-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Gleb Natapov authored
commit 660696d1 upstream. Source operand for one byte mov[zs]x is decoded incorrectly if it is in high byte register. Fix that. Signed-off-by:
Gleb Natapov <gleb@redhat.com> Signed-off-by:
-
David Howells authored
commit 9e687946 upstream. Give the OID registry file module information so that it doesn't taint the kernel when compiled as a module and loaded. Reported-by:
Dros Adamson <Weston.Adamson@netapp.com> Signed-off-by:
David Howells <dhowells@redhat.com> cc: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by:
-
Johan Hovold authored
commit 91cf54fe upstream. Fix regression introduced by commit 796211b7 ("mmc: atmel-mci: add pdc support and runtime capabilities detection") which removed the need for CONFIG_MMC_ATMELMCI_DMA but kept the Kconfig-entry as well as the compile guards around dma_release_channel() in remove(). Consequently, DMA is always enabled (if supported), but the DMA-channel is not released on module unload unless the DMA-config option is selected. Remove the no longer used CONFIG_MMC_ATMELMCI_DMA option completely. Signed-off-by:
Johan Hovold <jhovold@gmail.com> Acked-by:
-
Al Viro authored
commit 0d5cadb8 upstream. Bisected-by:
Michael Leun <lkml20130126@newton.leun.net> Signed-off-by:
-
Theodore Ts'o authored
commit 7f3e3c7c upstream. Fox the Kconfig documentation for CONFIG_EXT4_DEBUG to match the change made by commit a0b30c12: ext4: use module parameters instead of debugfs for mballoc_debug Signed-off-by:
"Theodore Ts'o" <tytso@mit.edu> Signed-off-by:
-
Theodore Ts'o authored
commit c5c72d81 upstream. Commit fb0a387d restricts block allocations for indirect-mapped files to block groups less than s_blockfile_groups. However, the online resizing code wasn't setting s_blockfile_groups, so the newly added block groups were not available for non-extent mapped files. Reported-by:
Eric Sandeen <sandeen@redhat.com> Signed-off-by:
-
Dmitry Monakhov authored
commit 171a7f21 upstream. Signed-off-by:
Dmitry Monakhov <dmonakhov@openvz.org> Signed-off-by:
-
Dmitry Monakhov authored
commit a75ae78f upstream. Otherwise destroyed ext_sb_info will be part of global shinker list and result in the following OOPS: JBD2: corrupted journal superblock JBD2: recovery failed EXT4-fs (dm-2): error loading journal general protection fault: 0000 [#1] SMP Modules linked in: fuse acpi_cpufreq freq_table mperf coretemp kvm_intel kvm crc32c_intel microcode sg button sd_mod crc_t10dif ahci libahci pata_acpi ata_generic dm_mirror dm_region_hash dm_log dm_\ mod CPU 1 Pid: 2758, comm: mount Not tainted 3.8.0-rc3+ #136 /DH55TC RIP: 0010:[<ffffffff811bfb2d>] [<ffffffff811bfb2d>] unregister_shrinker+0xad/0xe0 RSP: 0000:ffff88011d5cbcd8 EFLAGS: 00010207 RAX: 6b6b6b6b6b6b6b6b RBX: 6b6b6b6b6b6b6b53 RCX: 0000000000000006 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000246 RBP: ffff88011d5cbce8 R08: 0000000000000002 R09: 0000000000000001 R10: 0000000000000001 R11: 0000000000000000 R12: ffff88011cd3f848 R13: ffff88011cd3f830 R14: ffff88011cd3f000 R15: 0000000000000000 FS: 00007f7b721dd7e0(0000) GS:ffff880121a00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 00007fffa6f75038 CR3: 000000011bc1c000 CR4: 00000000000007e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process mount (pid: 2758, threadinfo ffff88011d5ca000, task ffff880116aacb80) Stack: ffff88011cd3f000 ffffffff8209b6c0 ffff88011d5cbd18 ffffffff812482f1 00000000000003f3 00000000ffffffea ffff880115f4c200 0000000000000000 ffff88011d5cbda8 ffffffff81249381 ffff8801219d8bf8 ffffffff00000000 Call Trace: [<ffffffff812482f1>] deactivate_locked_super+0x91/0xb0 [<ffffffff81249381>] mount_bdev+0x331/0x340 [<ffffffff81376730>] ? ext4_alloc_flex_bg_array+0x180/0x180 [<ffffffff81362035>] ext4_mount+0x15/0x20 [<ffffffff8124869a>] mount_fs+0x9a/0x2e0 [<ffffffff81277e25>] vfs_kern_mount+0xc5/0x170 [<ffffffff81279c02>] do_new_mount+0x172/0x2e0 [<ffffffff8127aa56>] do_mount+0x376/0x380 [<ffffffff8127ab98>] sys_mount+0x138/0x150 [<ffffffff818ffed9>] system_call_fastpath+0x16/0x1b Code: 8b 05 88 04 eb 00 48 3d 90 ff 06 82 48 8d 58 e8 75 19 4c 89 e7 e8 e4 d7 2c 00 48 c7 c7 00 ff 06 82 e8 58 5f ef ff 5b 41 5c c9 c3 <48> 8b 4b 18 48 8b 73 20 48 89 da 31 c0 48 c7 c7 c5 a0 e4 81 e\ 8 RIP [<ffffffff811bfb2d>] unregister_shrinker+0xad/0xe0 RSP <ffff88011d5cbcd8> Signed-off-by:
-
Dmitry Monakhov authored
commit 5d3ee208 upstream. It is incorrect to use list_for_each_entry_safe() for journal callback traversial because ->next may be removed by other task: ->ext4_mb_free_metadata() ->ext4_mb_free_metadata() ->ext4_journal_callback_del() This results in the following issue: WARNING: at lib/list_debug.c:62 __list_del_entry+0x1c0/0x250() Hardware name: list_del corruption. prev->next should be ffff88019a4ec198, but was 6b6b6b6b6b6b6b6b Modules linked in: cpufreq_ondemand acpi_cpufreq freq_table mperf coretemp kvm_intel kvm crc32c_intel ghash_clmulni_intel microcode sg xhci_hcd button sd_mod crc_t10dif aesni_intel ablk_helper cryptd lrw aes_x86_64 xts gf128mul ahci libahci pata_acpi ata_generic dm_mirror dm_region_hash dm_log dm_mod Pid: 16400, comm: jbd2/dm-1-8 Tainted: G W 3.8.0-rc3+ #107 Call Trace: [<ffffffff8106fb0d>] warn_slowpath_common+0xad/0xf0 [<ffffffff8106fc06>] warn_slowpath_fmt+0x46/0x50 [<ffffffff813637e9>] ? ext4_journal_commit_callback+0x99/0xc0 [<ffffffff8148cae0>] __list_del_entry+0x1c0/0x250 [<ffffffff813637bf>] ext4_journal_commit_callback+0x6f/0xc0 [<ffffffff813ca336>] jbd2_journal_commit_transaction+0x23a6/0x2570 [<ffffffff8108aa42>] ? try_to_del_timer_sync+0x82/0xa0 [<ffffffff8108b491>] ? del_timer_sync+0x91/0x1e0 [<ffffffff813d3ecf>] kjournald2+0x19f/0x6a0 [<ffffffff810ad630>] ? wake_up_bit+0x40/0x40 [<ffffffff813d3d30>] ? bit_spin_lock+0x80/0x80 [<ffffffff810ac6be>] kthread+0x10e/0x120 [<ffffffff810ac5b0>] ? __init_kthread_worker+0x70/0x70 [<ffffffff818ff6ac>] ret_from_fork+0x7c/0xb0 [<ffffffff810ac5b0>] ? __init_kthread_worker+0x70/0x70 This patch fix the issue as follows: - ext4_journal_commit_callback() make list truly traversial safe simply by always starting from list_head - fix race between two ext4_journal_callback_del() and ext4_journal_callback_try_del() Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
-
Dmitry Monakhov authored
commit 794446c6 upstream. The following race is possible: [kjournald2] other_task jbd2_journal_commit_transaction() j_state = T_FINISHED; spin_unlock(&journal->j_list_lock); ->jbd2_journal_remove_checkpoint() ->jbd2_journal_free_transaction(); ->kmem_cache_free(transaction) ->j_commit_callback(journal, transaction); -> USE_AFTER_FREE WARNING: at lib/list_debug.c:62 __list_del_entry+0x1c0/0x250() Hardware name: list_del corruption. prev->next should be ffff88019a4ec198, but was 6b6b6b6b6b6b6b6b Modules linked in: cpufreq_ondemand acpi_cpufreq freq_table mperf coretemp kvm_intel kvm crc32c_intel ghash_clmulni_intel microcode sg xhci_hcd button sd_mod crc_t10dif aesni_intel ablk_helper cryptd lrw aes_x86_64 xts gf128mul ahci libahci pata_acpi ata_generic dm_mirror dm_region_hash dm_log dm_mod Pid: 16400, comm: jbd2/dm-1-8 Tainted: G W 3.8.0-rc3+ #107 Call Trace: [<ffffffff8106fb0d>] warn_slowpath_common+0xad/0xf0 [<ffffffff8106fc06>] warn_slowpath_fmt+0x46/0x50 [<ffffffff813637e9>] ? ext4_journal_commit_callback+0x99/0xc0 [<ffffffff8148cae0>] __list_del_entry+0x1c0/0x250 [<ffffffff813637bf>] ext4_journal_commit_callback+0x6f/0xc0 [<ffffffff813ca336>] jbd2_journal_commit_transaction+0x23a6/0x2570 [<ffffffff8108aa42>] ? try_to_del_timer_sync+0x82/0xa0 [<ffffffff8108b491>] ? del_timer_sync+0x91/0x1e0 [<ffffffff813d3ecf>] kjournald2+0x19f/0x6a0 [<ffffffff810ad630>] ? wake_up_bit+0x40/0x40 [<ffffffff813d3d30>] ? bit_spin_lock+0x80/0x80 [<ffffffff810ac6be>] kthread+0x10e/0x120 [<ffffffff810ac5b0>] ? __init_kthread_worker+0x70/0x70 [<ffffffff818ff6ac>] ret_from_fork+0x7c/0xb0 [<ffffffff810ac5b0>] ? __init_kthread_worker+0x70/0x70 In order to demonstrace this issue one should mount ext4 with mount -o discard option on SSD disk. This makes callback longer and race window becomes wider. In order to fix this we should mark transaction as finished only after callbacks have completed Signed-off-by:
-
Theodore Ts'o authored
commit d76a3a77 upstream. In the case where an inode has a very stale transaction id (tid) in i_datasync_tid or i_sync_tid, it's possible that after a very large (2**31) number of transactions, that the tid number space might wrap, causing tid_geq()'s calculations to fail. Commit deeeaf13 "jbd2: fix fsync() tid wraparound bug", later modified by commit e7b04ac0 "jbd2: don't wake kjournald unnecessarily", attempted to fix this problem, but it only avoided kjournald spinning forever by fixing the logic in jbd2_log_start_commit(). Unfortunately, in the codepaths in fs/ext4/fsync.c and fs/ext4/inode.c that might call jbd2_log_start_commit() with a stale tid, those functions will subsequently call jbd2_log_wait_commit() with the same stale tid, and then wait for a very long time. To fix this, we replace the calls to jbd2_log_start_commit() and jbd2_log_wait_commit() with a call to a new function, jbd2_complete_transaction(), which will correctly handle stale tid's. As a bonus, jbd2_complete_transaction() will avoid locking j_state_lock for writing unless a commit needs to be started. This should have a small (but probably not measurable) improvement for ext4's scalability. Signed-off-by:
Ben Hutchings <ben@decadent.org.uk> Reported-by:
George Barnett <gbarnett@atlassian.com> Signed-off-by:
-
H. Peter Anvin authored
commit 78d77df7 upstream. During early init, we would incorrectly set the NX bit even if the NX feature was not supported. Instead, only set this bit if NX is actually available and enabled. We already do very early detection of the NX bit to enable it in EFER, this simply extends this detection to the early page table mask. Reported-by:
Fernando Luis Vázquez Cao <fernando@oss.ntt.co.jp> Signed-off-by:
H. Peter Anvin <hpa@linux.intel.com> Link: http://lkml.kernel.org/r/1367476850.5660.2.camel@nexusSigned-off-by:
-
Richard Cochran authored
commit 73e3dd6b upstream. The PTP Hardware Clock settime function in the e1000e driver computes nanoseconds from a struct timespec. The code converts the seconds field .tv_sec by multiplying it with NSEC_PER_SEC. However, both operands are of type long, resulting in an unintended overflow. The patch fixes the issue by using the helper function from time.h. Signed-off-by:
Richard Cochran <richardcochran@gmail.com> Tested-by:
Aaron Brown <aaron.f.brown@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by:
-
Jacob Keller authored
commit d87d8307 upstream. Previously, the ixgbe_msix_other was writing the full 32bits of the set interrupts, instead of only the ones which the ixgbe_msix_other is handling. This resulted in a loss of performance when the X540's PPS feature is enabled due to sometimes clearing queue interrupts which resulted in the driver not getting the interrupt for cleaning the q_vector rings often enough. The fix is to simply mask the lower 16bits off so that this handler does not write them in the EICR, which causes them to remain high and be properly handled by the clean_rings interrupt routine as normal. Signed-off-by:
Jacob Keller <jacob.e.keller@intel.com> Tested-by:
Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by:
-
Robin Holt authored
commit d69f3bad upstream. Trying to run an application which was trying to put data into half of memory using shmget(), we found that having a shmall value below 8EiB-8TiB would prevent us from using anything more than 8TiB. By setting kernel.shmall greater than 8EiB-8TiB would make the job work. In the newseg() function, ns->shm_tot which, at 8TiB is INT_MAX. ipc/shm.c: 458 static int newseg(struct ipc_namespace *ns, struct ipc_params *params) 459 { ... 465 int numpages = (size + PAGE_SIZE -1) >> PAGE_SHIFT; ... 474 if (ns->shm_tot + numpages > ns->shm_ctlall) 475 return -ENOSPC; [akpm@linux-foundation.org: make ipc/shm.c:newseg()'s numpages size_t, not int] Signed-off-by:
Robin Holt <holt@sgi.com> Reported-by:
Alex Thorlton <athorlton@sgi.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Johannes Berg authored
commit 990de49f upstream. When a full scan 2.4 and 5 GHz scan is scheduled, but then the 2.4 GHz part of the scan disables a 5.2 GHz channel due to, e.g. receiving country or frequency information, that 5.2 GHz channel might already be in the list of channels to scan next. Then, when the driver checks if it should do a passive scan, that will return false and attempt an active scan. This is not only wrong but can also lead to the iwlwifi device firmware crashing since it checks regulatory as well. Fix this by not setting the channel flags to just disabled but rather OR'ing in the disabled flag. That way, even if the race happens, the channel will be scanned passively which is still (mostly) correct. Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Bryan Schumaker authored
commit bf8d9097 upstream. The seconds field of an nfstime4 structure is 64bit, but we are assuming that the first 32bits are zero-filled. So if the client tries to set atime to a value before the epoch (touch -t 196001010101), then the server will save the wrong value on disk. Signed-off-by:
Bryan Schumaker <bjschuma@netapp.com> Signed-off-by:
J. Bruce Fields <bfields@redhat.com> Signed-off-by:
-
Wei Yongjun authored
commit 2c44a234 upstream. memory allocated by kmem_cache_alloc() should be freed using kmem_cache_free(), not kfree(). Signed-off-by:
Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by:
-
fanchaoting authored
commit b022032e upstream. we should return error status directly when nfs4_preprocess_stateid_op return error. Signed-off-by:
fanchaoting <fanchaoting@cn.fujitsu.com> Signed-off-by:
-
J. Bruce Fields authored
commit 0c7c3e67 upstream. Don't actually close any opens until we don't need them at all. This means being left with write access when it's not really necessary, but that's better than putting a file that might still have posix locks held on it, as we have been. Reported-by:
Toralf Förster <toralf.foerster@gmx.de> Signed-off-by:
-
Trond Myklebust authored
commit 8b6cc4d6 upstream. A server shouldn't normally return NFS4ERR_GRACE if the client holds a delegation, since no conflicting lock reclaims can be granted, however the spec does not require the server to grant the open in this instance Signed-off-by:
Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by:
-
Trond Myklebust authored
commit dbb21c25 upstream. A server shouldn't normally return NFS4ERR_GRACE if the client holds a delegation, since no conflicting lock reclaims can be granted, however the spec does not require the server to grant the lock in this instance. Signed-off-by:
-
Shaohua Li authored
commit 32f9f570 upstream. In SSD/hard disk hybid storage, discard request should be ignored for hard disk. We used to be doing this way, but the unplug path forgets it. This is suitable for stable tree since v3.6. Reported-and-tested-by:
Markus <M4rkusXXL@web.de> Signed-off-by:
Shaohua Li <shli@fusionio.com> Signed-off-by:
NeilBrown <neilb@suse.de> Signed-off-by:
-
NeilBrown authored
commit 486adf72 upstream. Maintenance of a bad-block-list currently defaults to 'enabled' and is then disabled when it cannot be supported. This is backwards and causes problem for dm-raid which didn't know to disable it. So fix the defaults, and only enabled for v1.x metadata which explicitly has bad blocks enabled. The problem with dm-raid has been present since badblock support was added in v3.1, so this patch is suitable for any -stable from 3.1 onwards. Reported-by:
Jonathan Brassow <jbrassow@redhat.com> Signed-off-by:
-
Trond Myklebust authored
commit 1dfd89af upstream. After a server reboot, the reclaimer thread will recover all the existing locks. For locks that are blocked, however, it will change the value of block->b_status to nlm_lck_denied_grace_period in order to signal that they need to wake up and resend the original blocking lock request. Due to a bug, however, the block->b_status never gets reset after the blocked locks have been woken up, and so the process goes into an infinite loop of resends until the blocked lock is satisfied. Reported-by:
Marc Eshel <eshel@us.ibm.com> Signed-off-by:
-
Oleg Nesterov authored
commit e56fb287 upstream. threadgroup_lock() takes signal->cred_guard_mutex to ensure that thread_group_leader() is stable. This doesn't look nice, the scope of this lock in do_execve() is huge. And as Dave pointed out this can lead to deadlock, we have the following dependencies: do_execve: cred_guard_mutex -> i_mutex cgroup_mount: i_mutex -> cgroup_mutex attach_task_by_pid: cgroup_mutex -> cred_guard_mutex Change de_thread() to take threadgroup_change_begin() around the switch-the-leader code and change threadgroup_lock() to avoid ->cred_guard_mutex. Note that de_thread() can't sleep with ->group_rwsem held, this can obviously deadlock with the exiting leader if the writer is active, so it does threadgroup_change_end() before schedule(). Reported-by:
Dave Jones <davej@redhat.com> Acked-by:
Tejun Heo <tj@kernel.org> Acked-by:
Li Zefan <lizefan@huawei.com> Signed-off-by:
Oleg Nesterov <oleg@redhat.com> Signed-off-by:
-
Greg Thelen authored
commit 421348f1 upstream. Call cond_resched() in shrink_dcache_parent() to maintain interactivity. Before this patch: void shrink_dcache_parent(struct dentry * parent) { while ((found = select_parent(parent, &dispose)) != 0) shrink_dentry_list(&dispose); } select_parent() populates the dispose list with dentries which shrink_dentry_list() then deletes. select_parent() carefully uses need_resched() to avoid doing too much work at once. But neither shrink_dcache_parent() nor its called functions call cond_resched(). So once need_resched() is set select_parent() will return single dentry dispose list which is then deleted by shrink_dentry_list(). This is inefficient when there are a lot of dentry to process. This can cause softlockup and hurts interactivity on non preemptable kernels. This change adds cond_resched() in shrink_dcache_parent(). The benefit of this is that need_resched() is quickly cleared so that future calls to select_parent() are able to efficiently return a big batch of dentry. These additional cond_resched() do not seem to impact performance, at least for the workload below. Here is a program which can cause soft lockup if other system activity sets need_resched(). int main() { struct rlimit rlim; int i; int f[100000]; char buf[20]; struct timeval t1, t2; double diff; /* cleanup past run */ system("rm -rf x"); /* boost nfile rlimit */ rlim.rlim_cur = 200000; rlim.rlim_max = 200000; if (setrlimit(RLIMIT_NOFILE, &rlim)) err(1, "setrlimit"); /* make directory for files */ if (mkdir("x", 0700)) err(1, "mkdir"); if (gettimeofday(&t1, NULL)) err(1, "gettimeofday"); /* populate directory with open files */ for (i = 0; i < 100000; i++) { snprintf(buf, sizeof(buf), "x/%d", i); f[i] = open(buf, O_CREAT); if (f[i] == -1) err(1, "open"); } /* close some of the files */ for (i = 0; i < 85000; i++) close(f[i]); /* unlink all files, even open ones */ system("rm -rf x"); if (gettimeofday(&t2, NULL)) err(1, "gettimeofday"); diff = (((double)t2.tv_sec * 1000000 + t2.tv_usec) - ((double)t1.tv_sec * 1000000 + t1.tv_usec)); printf("done: %g elapsed\n", diff/1e6); return 0; } Signed-off-by:
Greg Thelen <gthelen@google.com> Signed-off-by:
Dave Chinner <david@fromorbit.com> Signed-off-by:
-
Zhao Hongjiang authored
commit 04df32fa upstream. When we run the crackerjack testsuite, the inotify_add_watch test is stalled. This is caused by the invalid mask 0 - the task is waiting for the event but it never comes. inotify_add_watch() should return -EINVAL as it did before commit 676a0675 ("inotify: remove broken mask checks causing unmount to be EINVAL"). That commit removes the invalid mask check, but that check is needed. Check the mask's ALL_INOTIFY_BITS before the inotify_arg_to_mask() call. If none are set, just return -EINVAL. Because IN_UNMOUNT is in ALL_INOTIFY_BITS, this change will not trigger the problem that above commit fixed. [akpm@linux-foundation.org: fix build] Signed-off-by:
Zhao Hongjiang <zhaohongjiang@huawei.com> Acked-by:
Jim Somerville <Jim.Somerville@windriver.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: Eric Paris <eparis@parisplace.org> Signed-off-by:
-
