- 01 Dec, 2011 2 commits
-
-
Brian Gix authored
Some MITM scenarios require handling of the User Passkey Request event, by querying the user, and passing the response back. Signed-off-by: Brian Gix <bgix@codeaurora.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
-
Brian Gix authored
For some MITM protection pairing scenarios, the user is required to enter or accept a 6 digit passkey. Signed-off-by: Brian Gix <bgix@codeaurora.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
-
- 23 Nov, 2011 1 commit
-
-
Gustavo F. Padovan authored
I did this as a part of a testing course at university, but it might be useful upstream as well. Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
-
- 21 Nov, 2011 5 commits
-
-
Andrei Emeltchenko authored
Use queue instead of stack discipline for device list. When processing dev_list with list_for_each* devices will be prosessed in order they were added (Usually BR/EDR first and AMP later). Also output from hciconfig looks nicer :-) Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
-
Brian Gix authored
Low Energy (LE) pairing responses must be recognized and handled differently from BR/EDR pairing responses. BR/EDR responses are handled via HCI commands by the LMP layer, and LE responses are handled by the Host. Signed-off-by: Brian Gix <bgix@codeaurora.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
-
Brian Gix authored
There are 4 possible User Responses to pairing requests, and they all share the same checks and handling. This restructures the handling of the two Confirm responses in preperation for the second two. Signed-off-by: Brian Gix <bgix@codeaurora.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
-
Andrei Emeltchenko authored
Fixes bluetooth compiling when CONFIG_BT_L2CAP is not enabled net/built-in.o: In function `hci_dev_open': (.text+0xdce9a): undefined reference to `enable_hs' Reported-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
-
Brian Gix authored
Signed-off-by: Brian Gix <bgix@codeaurora.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
-
- 16 Nov, 2011 18 commits
-
-
Szymon Janc authored
Signed-off-by: Szymon Janc <szymon.janc@tieto.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
-
Szymon Janc authored
Make __l2cap_global_chan_by_addr similar to other find functions. Signed-off-by: Szymon Janc <szymon.janc@tieto.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
-
Szymon Janc authored
This make it easier to see what is the real reason for loop to exit. skb_queue_next return valid skb or garbage, not NULL. Signed-off-by: Szymon Janc <szymon.janc@tieto.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
-
Szymon Janc authored
Make it easier to see what is loop break condition. skb_queue_next return valid skb or garbage, not NULL. Signed-off-by: Szymon Janc <szymon.janc@tieto.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
-
Szymon Janc authored
Due to ERTM reliability L2CAP channel needs to be disconnected if adding to srej list failed. Signed-off-by: Szymon Janc <szymon.janc@tieto.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
-
Andrei Emeltchenko authored
Type can be changed during re-opening device /dev/vhci. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
-
Andrei Emeltchenko authored
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
-
Andrei Emeltchenko authored
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
-
Brian Gix authored
Signed-off-by: Brian Gix <bgix@codeaurora.org> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
-
Brian Gix authored
Signed-off-by: Brian Gix <bgix@codeaurora.org> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
-
Johan Hedberg authored
The mgmt_start_discovery command contains the type of discovery that should be started so this should be passed to the start_discovery function. This patch doesn't yet add any action depending on the type of the requested discovery. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
-
Johan Hedberg authored
The command complete event was completely missing for this command. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
-
Johan Hedberg authored
The management protocol uses a single byte for error codes (aka command status). In some places this value is directly copied from HCI and in other a POSIX error number is used. This makes it impossible for user-space to uniquily decipher the meaning of an error. To solve this issue a new mgmt-specific set of error codes is added along with a conversion table for HCI status values. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
-
Johan Hedberg authored
When the adapter state is already what is requested it's more friendly to user-space to simply report success than to send a EALREADY error message. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
-
Johan Hedberg authored
When possible cmd_complete should be returned instead of cmd_status since it contains the remote address (this helps user-space track what exactly failed). Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
-
Johan Hedberg authored
The kernel needs to know whether it should connect to a device over BR/EDR or over LE. This is particularly important in the future when dual-mode device may be connectable also over LE. It is also important if/when we decide to move the LE advertisement cache from the kernel into user-space. Adding the type to the mgmt command also ensures conformance with the latest mgmt API spec. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
-
Andre Guedes authored
This patches creates mgmt_stop_discovery_failed() which removes pending MGMT_OP_STOP_DISCOVERY commands and sends proper command status events. This patch also fixes the MGMT_OP_STOP_DISCOVERY command leak in case cancel inquiry fails. Signed-off-by: Andre Guedes <andre.guedes@openbossa.org> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
-
Andre Guedes authored
This patch renames the function mgmt_inquiry_failed() to mgmt_start_discovery_failed(). This function is more related to MGMT_OP_START_DISCOVERY command handling than to inquiry. Besides, this functions will be reused by LE based discovery procedures in case of failure. Signed-off-by: Andre Guedes <andre.guedes@openbossa.org> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
-
- 10 Nov, 2011 7 commits
-
-
Gustavo F. Padovan authored
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
-
Gustavo F. Padovan authored
Some incomming connections needs to increase the security level by requesting encryption for example (HID keyboard case). This change allows the userspace to change it through setsockopt with defer_setup enabled. Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
-
Gustavo F. Padovan authored
rename to l2cap_chan_check_security() to make it consistent with other l2cap_exported functions. This function will be exported in a later commit. Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
-
Johan Hedberg authored
Since disconnecting may fail the status needs to be communicated to user space. This also updates the implementation to match the latest mgmt API specification. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
-
Johan Hedberg authored
Since the command can fail we need to have a proper response with the remote address and a failure status for it. This also updates it to conform to the latest mgmt API spec. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
-
Johan Hedberg authored
The hci_conn callbacks are called with the hci_dev lock already held so no locking should be attempted in them. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
-
Johan Hedberg authored
It's necessary to know the distinction between public and random LE addresses so the mgmt interface also needs to distinguish between them. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
-
- 09 Nov, 2011 7 commits
-
-
Dan Carpenter authored
Probably we never hit this condition, but in case we do, we may as well put a return here instead of just printing a warning message and then corrupting memory. The caller doesn't check the return code. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Amitkumar Karwar authored
By default SDIO multiport aggregation is disabled. It's useful to get good throughput results. This patch enables it. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Dan Carpenter authored
We dereference adapter in the error handling code so this needed to be fixed. This function is always called like: adapter->if_ops.host_to_card(adapter, ...); so adapter can never be NULL and I've removed the NULL check. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Dan Carpenter authored
The previous if statement means this that pointer is NULL so there is no need to free it. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Julia Lawall authored
Use kstrtoul, etc instead of the now deprecated strict_strtoul, etc. A semantic patch rule for the kstrtoul case is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression a,b; {int,long} *c; @@ -strict_strtoul +kstrtoul (a,b,c) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Julia Lawall authored
Use kstrtoul, etc instead of the now deprecated strict_strtoul, etc. A semantic patch rule for the kstrtoul case is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression a,b; {int,long} *c; @@ -strict_strtoul +kstrtoul (a,b,c) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Johannes Berg authored
Implement the socket wifi TX status error queue reflection in mac80211. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-