- 16 May, 2018 40 commits
-
-
Sergei Shtylyov authored
Add the initial device tree for the V3H Starter Kit board. The board has 1 debug serial port (SCIF0); include support for it, so that the serial console can work. Based on the original (and large) patch by Vladimir Barinov. Signed-off-by:
Vladimir Barinov <vladimir.barinov@cogentembedded.com> Signed-off-by:
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by:
Simon Horman <horms+renesas@verge.net.au>
-
Sergei Shtylyov authored
When adding the R8A77980 EtherAVB device I failed to notice that it does not have the usual "status" property disabling the described devices in anticipation that the board device trees enable the devices according to their needs. This causes the EtherAVB driver to successfully probe despite e.g. the needed pins not having been configured -- luckily, "eth<n>" device can't be opened anyway... Fixes: bf6f9083 ("arm64: dts: renesas: r8a77980: add EtherAVB support") Signed-off-by:
-
Sergei Shtylyov authored
When adding the R8A77970 EtherAVB device I failed to notice that it does not have the usual "status" property disabling the described devices in anticipation that the board device trees enable the devices according to their needs. This causes the EtherAVB driver to successfully probe despite e.g. the needed pins not having been configured -- luckily, "eth<n>" device can't be opened anyway... Fixes: bea2ab13 ("arm64: dts: renesas: r8a77970: add EtherAVB support") Signed-off-by:
-
Jacopo Mondi authored
Describe VIN4 interface for R-Car D3 R8A77995 SoC. Signed-off-by:
Jacopo Mondi <jacopo+renesas@jmondi.org> Acked-by:
Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> [simon: sorted node by bus address] Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com>
-
Simon Horman authored
Add resets property to CAN-FD node to describe it in the reset topology of on-SoC devices. This allows to reset the CAN-FD device using the Reset Controller API. Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be>
-
Geert Uytterhoeven authored
Enable the performance monitor unit for the Cortex-A53 cores on the R-Car V3M (r8a77970) SoC. Signed-off-by:
-
Geert Uytterhoeven authored
Add a device node for the second Cortex-A53 CPU core on the Renesas R-Car V3M (r8a77970) SoC, and adjust the interrupt delivery masks for ARM Generic Interrupt Controller and Architectured Timer. Signed-off-by:
-
Takeshi Kihara authored
Add SDHI nodes to the DT of the r8a77965 SoC. Based on several similar patches of the R8A7796 device tree by Simon Horman <horms+renesas@verge.net.au>. Signed-off-by:
Takeshi Kihara <takeshi.kihara.df@renesas.com> Signed-off-by:
Yoshihiro Kaneko <ykaneko0929@gmail.com> Reviewed-by:
-
Geert Uytterhoeven authored
On the R-Car Starter Kit Premier/Pro, all of the DDR0, DDR1, DDR0C, and DDR1C power rails need to be kept powered when backup mode is enabled. Reflect this in the "rohm,ddr-backup-power" property for the BD9571MWV PMIC node. The accessory power switch (SW8) is a momentary switch, hense specify "rohm,rstbmode-pulse". Signed-off-by:
-
Geert Uytterhoeven authored
On Salvator-X(S), all of the DDR0, DDR1, DDR0C, and DDR1C power rails need to be kept powered when backup mode is enabled. Reflect this in the "rohm,ddr-backup-power" property for the BD9571MWV PMIC node. The accessory power switch (SW23) is a toggle switch, hence specify "rohm,rstbmode-level". Signed-off-by:
-
Geert Uytterhoeven authored
Add a device node for the ROHM BD9571MWV PMIC. This was based on the example in the DT binding documentation, but using IRQ0 instead of a GPIO interrupt, as that matches the schematics, and because INTC-EX is a simpler block. Signed-off-by:
-
Geert Uytterhoeven authored
Add missing space after comma. Signed-off-by:
-
Geert Uytterhoeven authored
Add missing spaces after commas. Signed-off-by:
-
Geert Uytterhoeven authored
Add missing spaces after commas. Replace 8 consecutive spaces by a TAB. Signed-off-by:
-
Yoshihiro Shimoda authored
This patch enables USB2.0 host channel 3 for r8a7795 with Salvator-XS. Signed-off-by:
Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by:
-
Yoshihiro Shimoda authored
This patch enables HS-USB channel3 node for r8a7795 with Salvator-XS. Signed-off-by:
-
Yoshihiro Shimoda authored
This patch enables usb2_phy3 node for r8a7795 with Salvator-XS. You must change the SW31 to OFF-OFF-ON-ON-ON-ON on the board. Signed-off-by:
-
Wolfram Sang authored
Add the EEPROM found on Salvator-X and -XS boards for H3, M3-W, and M3-N on the IIC_DVFS bus. Signed-off-by:
Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by:
-
Sergei Shtylyov authored
Define the Condor board dependent part of the CAN-FD device node. Based on the original (and large) patch by Vladimir Barinov. Signed-off-by:
-
Sergei Shtylyov authored
Define the generic R8A77980 part of the CAN-FD device node. Based on the original (and large) patch by Vladimir Barinov. Signed-off-by:
-
Sergei Shtylyov authored
Define the Eagle board dependent part of the CAN-FD device node. Based on the original (and large) patch by Vladimir Barinov. Signed-off-by:
Ramesh Shanmugasundaram <ramesh.shanmugasundaram@bp.renesas.com> Signed-off-by:
-
Sergei Shtylyov authored
Define the generic R8A77970 part of the CAN-FD device node. Based on the original (and large) patch by Vladimir Barinov. Signed-off-by:
-
Niklas Söderlund authored
Based on previous work by Ryo Kataoka <ryo.kataoka.wt@renesas.com>. Signed-off-by:
-
Niklas Söderlund authored
Replace the hardcoded power domain indices by R8A77965_PD_* symbols. Signed-off-by:
Jacopo Mondi <jacopo@jmondi.org> [simon: dropped hunk to include r8a77965-sysc.h which is already present] Signed-off-by:
-
Sergei Shtylyov authored
Now that the commit 7755b40d ("dt-bindings: power: add R8A77980 SYSC power domain definitions") has hit Linus' tree, we can replace the bare numbers (we had to use to avoid a cross tree dependency) with these macro definitions... Signed-off-by:
-
Sergei Shtylyov authored
Now that the commit 35b3c462 ("dt-bindings: clock: add R8A77980 CPG core clock definitions") has hit Linus' tree, we can replace the bare numbers (we had to use to avoid a cross tree dependency) with these macro definitions... Signed-off-by:
-
Simon Horman authored
The rcar_sound port nodes have unit names and thus should have register properties. This is flagged by dtc as follows: # make dtbs W=1 ... DTC arch/arm64/boot/dts/renesas/r8a77965-salvator-x.dtb arch/arm64/boot/dts/renesas/r8a77965-salvator-x.dtb: Warning (unit_address_vs_reg): /soc/sound@ec500000/ports/port@0: node has a unit name, but no reg property DTC arch/arm64/boot/dts/renesas/r8a77965-salvator-xs.dtb arch/arm64/boot/dts/renesas/r8a77965-salvator-xs.dtb: Warning (unit_address_vs_reg): /soc/sound@ec500000/ports/port@0: node has a unit name, but no reg property Prior to this patch the port nodes only defined in board DTS files. As the register properties are common this patch defines the port nodes and provides register properties in the SoC DTS file. Signed-off-by:
-
Simon Horman authored
The rcar_sound port nodes have unit names and thus should have register properties. This is flagged by dtc as follows: # make dtbs W=1 ... DTC arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dtb arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dtb: Warning (unit_address_vs_reg): /soc/sound@ec500000/ports/port@0: node has a unit name, but no reg property arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dtb: Warning (unit_address_vs_reg): /soc/sound@ec500000/ports/port@1: node has a unit name, but no reg property ... DTC arch/arm64/boot/dts/renesas/r8a7796-salvator-xs.dtb arch/arm64/boot/dts/renesas/r8a7796-salvator-xs.dtb: Warning (unit_address_vs_reg): /soc/sound@ec500000/ports/port@0: node has a unit name, but no reg property arch/arm64/boot/dts/renesas/r8a7796-salvator-xs.dtb: Warning (unit_address_vs_reg): /soc/sound@ec500000/ports/port@1: node has a unit name, but no reg property Prior to this patch the port nodes only defined in board DTS files. As the register properties are common this patch defines the port nodes and provides register properties in the SoC DTS file. Signed-off-by:
-
Simon Horman authored
The rcar_sound port nodes have unit names and thus should have register properties. This is flagged by dtc as follows: # make dtbs W=1 ... DTC arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dtb arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dtb: Warning (unit_address_vs_reg): /soc/sound@ec500000/ports/port@0: node has a unit name, but no reg property arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dtb: Warning (unit_address_vs_reg): /soc/sound@ec500000/ports/port@1: node has a unit name, but no reg property arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dtb: Warning (unit_address_vs_reg): /soc/sound@ec500000/ports/port@2: node has a unit name, but no reg property ... DTC arch/arm64/boot/dts/renesas/r8a7795-salvator-xs.dtb arch/arm64/boot/dts/renesas/r8a7795-salvator-xs.dtb: Warning (unit_address_vs_reg): /soc/sound@ec500000/ports/port@0: node has a unit name, but no reg property arch/arm64/boot/dts/renesas/r8a7795-salvator-xs.dtb: Warning (unit_address_vs_reg): /soc/sound@ec500000/ports/port@1: node has a unit name, but no reg property arch/arm64/boot/dts/renesas/r8a7795-salvator-xs.dtb: Warning (unit_address_vs_reg): /soc/sound@ec500000/ports/port@2: node has a unit name, but no reg property DTC arch/arm64/boot/dts/renesas/r8a7795-es1-salvator-x.dtb arch/arm64/boot/dts/renesas/r8a7795-es1-salvator-x.dtb: Warning (unit_address_vs_reg): /soc/sound@ec500000/ports/port@0: node has a unit name, but no reg property arch/arm64/boot/dts/renesas/r8a7795-es1-salvator-x.dtb: Warning (unit_address_vs_reg): /soc/sound@ec500000/ports/port@1: node has a unit name, but no reg property arch/arm64/boot/dts/renesas/r8a7795-es1-salvator-x.dtb: Warning (unit_address_vs_reg): /soc/sound@ec500000/ports/port@2: node has a unit name, but no reg property Prior to this patch the port nodes only defined in board DTS files. As the register properties are common this patch defines the port nodes and provides register properties in the SoC DTS file. Signed-off-by:
-
Sergei Shtylyov authored
Define the V3M Starter Kit board dependent part of the DU and LVDS device nodes. Also add the device nodes for Thine THC63LVD1024 LVDS decoder and Analog Devices ADV7511W HDMI transmitter... Based on the original (and large) patch by Vladimir Barinov. Signed-off-by:
-
Sergei Shtylyov authored
Define the Condor board dependent part of the MMC0 (connected to eMMC chip) device node along with the necessary voltage regulators... Signed-off-by:
-
Kieran Bingham authored
The DU1 external dot clock is provided by the fixed frequency clock generator X21, while the DU0 and DU3 clocks are provided by the programmable Versaclock6 clock generator. Enable the clocks, and the HDMI encoder for the M3-N Salvator-XS, and hook it up to the HDMI connector Based on patches from Takeshi Kihara <takeshi.kihara.df@renesas.com> Signed-off-by:
Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Reviewed-by:
-
Kieran Bingham authored
The DU1 external dot clock is provided by the fixed frequency clock generator X21, while the DU0 and DU3 clocks are provided by the programmable Versaclock5 clock generator. Enable the clocks, and the HDMI encoder for the M3-N Salvator-X board and hook it up to the HDMI connector. Based on patches from Takeshi Kihara <takeshi.kihara.df@renesas.com> Signed-off-by:
-
Kieran Bingham authored
Add the HDMI encoder to the R8A77965 DT in disabled state. Based on a similar patch of the R8A7796 device tree by Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>. Signed-off-by:
-
Kieran Bingham authored
The DU entity node has been previously added but only as a placeholder. Populate the node with the properties to use the device. Signed-off-by:
-
Kieran Bingham authored
The r8a77965 has 4 VSP instances. Based on a similar patch of the R8A7796 device tree by Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>. Signed-off-by:
-
Kieran Bingham authored
The FCPs handle the interface between various IP cores and memory. Add the instances related to the FDPs and VSP2s. Based on a similar patch of the R8A7796 device tree by Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>. Signed-off-by:
-
Yoshihiro Shimoda authored
The cache controller node should not have unit-addresses and reg properties. So, this patch removes them. Signed-off-by:
-
Yoshihiro Shimoda authored
The basic support patch 9491a8b17530 ("arm64: dts: renesas: Add Renesas R8A77990 SoC support") lacks the compatible "arm,psci-1.0" in the psci node. So, this patch revises it. Signed-off-by: -
Simon Horman authored
Remove 'status = "disabled"' to make sure all IPMMU devices are enabled in DT on the r8a7795 ES1.0 Soc. This is a follow up for a patch by Magnus Damm for the the r8a7795 ES2.0 and other R-Car Gen 3 SoCs. Signed-off-by:
-
