Commits · 11e2ede0228ee0f81ccacd15894908c3bf241f73 · nexedi / linux

30 Apr, 2008 40 commits

md: prevent duplicates in bind_rdev_to_array · 11e2ede0

Dan Williams authored Apr 30, 2008

Found when trying to reassemble an active externally managed array.  Without
this check we hit the more noisy "sysfs duplicate" warning in the later call
to kobject_add.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11e2ede0

md: remove a stray command from a copy and paste error in resync_start_store · 242b363e

Dan Williams authored Apr 30, 2008

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

242b363e

md: fix up switching md arrays between read-only and read-write · 648b629e

NeilBrown authored Apr 30, 2008

When setting an array to 'readonly' or to 'active' via sysfs, we must make the
appropriate set_disk_ro call too.

Also when switching to "read_auto" (which is like readonly, but blocks on the
first write so that metadata can be marked 'dirty') we need to be more careful
about what state we are changing from.
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

648b629e

md: fix 'safemode' handling for external metadata. · 31a59e34

NeilBrown authored Apr 30, 2008

'safemode' relates to marking an array as 'clean' if there has been no write
traffic for a while (a couple of seconds), to reduce the chance of the array
being found dirty on reboot.

->safemode is set to '1' when there have been no write for a while, and it
gets set to '0' when the superblock is updates with the 'clean' flag set.

This requires a few fixes for 'external' metadata:
 - When an array is set to 'clean' via sysfs, 'safemode' must be cleared.
 - when we write to an array that has 'safemode' set (there must have been
        some delay in updating the metadata), we need to clear safemode.
 - Don't try to update external metadata in md_check_recovery for safemode
        transitions - it won't work.

Also, don't try to support "immediate safe mode" (safemode==2) for external
metadata, it cannot really work (the safemode timeout can be set very low if
this is really needed).
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

31a59e34

md: reinitialise more mddev fields in do_md_stop. · d897dbf9

NeilBrown authored Apr 30, 2008

I keep finding problems where an mddev gets reused and some fields has a value
from a previous usage that confuses the new usage. So clear all fields that
could possible need clearing when calling do_md_stop.

Also initialise the 'level' of a new array to LEVEL_NONE (which isn't 0).
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

d897dbf9

md: skip all metadata update processing when using external metadata. · 8377bc80

NeilBrown authored Apr 30, 2008

All the metadata update processing for external metadata is on in user-space
or through the sysfs interfaces, so make "md_update_sb" a no-op in that case.
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8377bc80

md: fix use after free when removing rdev via sysfs · 6a51830e

Dan Williams authored Apr 30, 2008

rdev->mddev is no longer valid upon return from entry->store() when the
'remove' command is given.

Cc: <stable@kernel.org>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

6a51830e

pxafb: preliminary smart panel interface support (update) · 7f1133cb

Eric Miao authored Apr 30, 2008

FB_PXA_SMARTPANEL defaults to "n" and removed the cast to void *.
Signed-off-by: Daniel Mack <daniel@caiaq.de>
Acked-by: Eric Miao <eric.miao@marvell.com>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7f1133cb

pxafb: preliminary smart panel interface support · 3c42a449

Eric Miao authored Apr 30, 2008

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

3c42a449

pxafb: move parallel LCD timing setup into dedicate function · 90eabbf0

Eric Miao authored Apr 30, 2008

the new_regs stuff has been removed, and all the setup (modification to those
fbi->reg_*) is protected with IRQ disabled

   * disable IRQ is too heavy here, provided that no IRQ context will
     touch the fbi->reg_* and the only possible contending place is
     in the CPUFREQ_POSTCHANGE (task context), a mutex will be better,
     leave this for future improvement
Signed-off-by: eric miao <eric.miao@marvell.com>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

90eabbf0

pxafb: use completion for LCD disable wait code · 2ba162b9

Eric Miao authored Apr 30, 2008

Signed-off-by: eric miao <eric.miao@marvell.com>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2ba162b9

pxafb: introduce lcd_{read,write}l() to wrap the __raw_{read,write}l() · a7535ba7

Eric Miao authored Apr 30, 2008

using __raw_{read,write}l() everywhere looks messy, introduce
lcd_{read,write}l() to get this cleaned up a bit
Signed-off-by: eric miao <eric.miao@marvell.com>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

a7535ba7

pxafb: make lubbock/mainstone/zylonite/littleton to use new LCD connection type · 0454bd09