These two functions are only called by tsc_init(), which is an __init
function during boot time, so mark them __init as well.
Signed-off-by: Dou Liyang <douly.fnst@cn.fujitsu.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1510135792-17429-1-git-send-email-douly.fnst@cn.fujitsu.comSigned-off-by: Ingo Molnar <mingo@kernel.org>

Fix build problem:

>> WARNING: vmlinux.o(.text+0x4223a): Section mismatch in
   reference from the function uv_tsc_check_sync() to the function
   .init.text:uv_early_read_mmr() The function uv_tsc_check_sync()
   references the function __init uv_early_read_mmr().  This is often
   because uv_tsc_check_sync lacks a __init
Signed-off-by: Mike Travis <mike.travis@hpe.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Dimitri Sivanich <dimitri.sivanich@hpe.com>
Cc: Russ Anderson <russ.anderson@hpe.com>
Cc: Andrew Banman <andrew.banman@hpe.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Bin Gao <bin.gao@linux.intel.com>
Link: https://lkml.kernel.org/r/20171023191841.985614692@stormcage.americas.sgi.com

tsc_async_resets is only available when CONFIG_X86_TSC=y. So a build with
CONFIG_X86_TSC=n breaks:

arch/x86/kernel/tsc.o: In function `tsc_init':
(.init.text+0x87b): undefined reference to `tsc_async_resets'

Add a stub define for the TSC=n case.

Side note: This config switch should simply be removed.
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Fixes: 341102c3 ("x86/tsc: Add option that TSC on Socket 0 being non-zero is valid")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Mike Travis <mike.travis@hpe.com>

Insert a check early in UV system startup that checks whether BIOS was
able to obtain satisfactory TSC Sync stability.  If not, it usually
is caused by an error in the external TSC clock generation source.
In this case the best fallback is to use the builtin hardware RTC
as the kernel will not be able to set an accurate TSC sync either.
Signed-off-by: Mike Travis <mike.travis@hpe.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Dimitri Sivanich <dimitri.sivanich@hpe.com>
Reviewed-by: Russ Anderson <russ.anderson@hpe.com>
Reviewed-by: Andrew Banman <andrew.abanman@hpe.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Andrew Banman <andrew.banman@hpe.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Bin Gao <bin.gao@linux.intel.com>
Link: https://lkml.kernel.org/r/20171012163202.406294490@stormcage.americas.sgi.com

On systems where multiple chassis are reset asynchronously, and thus
the TSC counters are started asynchronously, the offset needed to
convert to TSC to ART would be different.  Disable ART in that case
and rely on the TSC counters to supply the accurate time.
Signed-off-by: Mike Travis <mike.travis@hpe.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Dimitri Sivanich <dimitri.sivanich@hpe.com>
Cc: Russ Anderson <russ.anderson@hpe.com>
Cc: Andrew Banman <andrew.banman@hpe.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Bin Gao <bin.gao@linux.intel.com>
Link: https://lkml.kernel.org/r/20171012163202.289397994@stormcage.americas.sgi.com

Prior to the TSC ADJUST MSR being available, the method to set TSC's in
sync with each other naturally caused a small skew between cpu threads.
This was NOT a firmware bug at the time so introducing a whole avalanche
of alarming warning messages might cause unnecessary concern and customer
complaints. (Example: >3000 msgs in a 32 socket Skylake system.)

Simply report the warning condition, if possible do the necessary fixes,
and move on.
Signed-off-by: Mike Travis <mike.travis@hpe.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Dimitri Sivanich <dimitri.sivanich@hpe.com>
Reviewed-by: Russ Anderson <russ.anderson@hpe.com>
Reviewed-by: Peter Zijlstra <peterz@infradead.org>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Andrew Banman <andrew.banman@hpe.com>
Cc: Bin Gao <bin.gao@linux.intel.com>
Link: https://lkml.kernel.org/r/20171012163202.175062400@stormcage.americas.sgi.com

If the TSC has already been determined to be unstable, then checking
TSC ADJUST values is a waste of time and generates unnecessary error
messages.
Signed-off-by: Mike Travis <mike.travis@hpe.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Dimitri Sivanich <dimitri.sivanich@hpe.com>
Reviewed-by: Russ Anderson <russ.anderson@hpe.com>
Reviewed-by: Peter Zijlstra <peterz@infradead.org>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Andrew Banman <andrew.banman@hpe.com>
Cc: Bin Gao <bin.gao@linux.intel.com>
Link: https://lkml.kernel.org/r/20171012163202.060777495@stormcage.americas.sgi.com

Add a flag to indicate and process that TSC counters are on chassis
that reset at different times during system startup.  Therefore which
TSC ADJUST values should be zero is not predictable.
Signed-off-by: Mike Travis <mike.travis@hpe.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Dimitri Sivanich <dimitri.sivanich@hpe.com>
Reviewed-by: Russ Anderson <russ.anderson@hpe.com>
Reviewed-by: Andrew Banman <andrew.abanman@hpe.com>
Reviewed-by: Peter Zijlstra <peterz@infradead.org>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Andrew Banman <andrew.banman@hpe.com>
Cc: Bin Gao <bin.gao@linux.intel.com>
Link: https://lkml.kernel.org/r/20171012163201.944370012@stormcage.americas.sgi.com

simple_udelay_calibration() relies on x86_platform's calibration ops.
For KVM these ops are set late in setup_arch() and so
simple_udelay_calibration() ends up using native version.

Besides being possibly incorrect, this significantly increases kernel
boot time. For example, on my laptop executing start_kernel() by a guest
takes ~10 times more than when KVM's ops are used.

Since early_xdbc_setup_hardware() relies on calibration having been
performed move it too.
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: baolu.lu@linux.intel.com
Link: https://lkml.kernel.org/r/20170911185111.20636-1-boris.ostrovsky@oracle.comSigned-off-by: Thomas Gleixner <tglx@linutronix.de>

recalibrate_cpu_khz() is called from powernow K7 and Pentium 4/Xeon
CPU freq driver. It recalibrates cpu frequency in case of SMP = n
and doesn't need to return anything.

Mark it void, also remove the #else branch.
Signed-off-by: Dou Liyang <douly.fnst@cn.fujitsu.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/1500003247-17368-2-git-send-email-douly.fnst@cn.fujitsu.com

Commit dd759d93 ("x86/timers: Add simple udelay calibration") adds
an static function in x86 boot-time initializations.

But, this function is actually related to TSC, so it should be maintained
in tsc.c, not in setup.c.

Move simple_udelay_calibration() from setup.c to tsc.c and rename it to
tsc_early_delay_calibrate for more readability.
Signed-off-by: Dou Liyang <douly.fnst@cn.fujitsu.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/1500003247-17368-1-git-send-email-douly.fnst@cn.fujitsu.com

Pull DeviceTree fixes from Rob Herring:

 - fix build for !OF providing empty of_find_device_by_node

 - fix Abracon vendor prefix

 - sync dtx_diff include paths (again)

 - a stm32h7 clock binding doc fix

* tag 'devicetree-fixes-for-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  dt-bindings: clk: stm32h7: fix clock-cell size
  scripts/dtc: dtx_diff - 2nd update of include dts paths to match build
  dt-bindings: fix vendor prefix for Abracon
  of: provide inline helper for of_find_device_by_node

Pull x86 fixes from Ingo Molnar:
 "Another round of CR3/PCID related fixes (I think this addresses all
  but one of the known problems with PCID support), an objtool fix plus
  a Clang fix that (finally) solves all Clang quirks to build a bootable
  x86 kernel as-is"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/asm: Fix inline asm call constraints for Clang
  objtool: Handle another GCC stack pointer adjustment bug
  x86/mm/32: Load a sane CR3 before cpu_init() on secondary CPUs
  x86/mm/32: Move setup_clear_cpu_cap(X86_FEATURE_PCID) earlier
  x86/mm/64: Stop using CR3.PCID == 0 in ASID-aware code
  x86/mm: Factor out CR3-building code

Pull timer fix from Ingo Molnar:
 "A clocksource driver section mismatch fix"

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  clocksource/integrator: Fix section mismatch warning

Pull irq fixes from Ingo Molnar:
 "Three irqchip driver fixes, and an affinity mask helper function bug
  fix affecting x86"

* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  Revert "genirq: Restrict effective affinity to interrupts actually using it"
  irqchip.mips-gic: Fix shared interrupt mask writes
  irqchip/gic-v4: Fix building with ancient gcc
  irqchip/gic-v3: Iterate over possible CPUs by for_each_possible_cpu()

Pull address-limit checking fixes from Ingo Molnar:
 "This fixes a number of bugs in the address-limit (USER_DS) checks that
  got introduced in the merge window, (mostly) affecting the ARM and
  ARM64 platforms"

* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  arm64/syscalls: Move address limit check in loop
  arm/syscalls: Optimize address limit check
  Revert "arm/syscalls: Check address limit on user-mode return"
  syscalls: Use CHECK_DATA_CORRUPTION for addr_limit_user_check

Pull misc security layer update from James Morris:
 "This is the remaining 'general' change in the security tree for v4.14,
  following the direct merging of SELinux (+ TOMOYO), AppArmor, and
  seccomp.

  That's everything now for the security tree except IMA, which will
  follow shortly (I've been traveling for the past week with patchy
  internet)"

* 'next-general' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
  security: fix description of values returned by cap_inode_need_killpriv

Pull TPM updates from James Morris:
 "Here are the TPM updates from Jarkko for v4.14, which I've placed in
  their own branch (next-tpm). I ended up cherry-picking them as other
  changes had been made in Jarkko's branch after he sent me his original
  pull request.

  I plan on maintaining a separate branch for TPM (and other security
  subsystems) from now on.

  From Jarkko: 'Not much this time except a few fixes'"

* 'next-tpm' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
  tpm: ibmvtpm: simplify crq initialization and document crq format
  tpm: replace msleep() with  usleep_range() in TPM 1.2/2.0 generic drivers
  Documentation: tpm: add powered-while-suspended binding documentation
  tpm: tpm_crb: constify acpi_device_id.
  tpm: vtpm: constify vio_device_id

The crq is passed in registers and is the same on BE and LE hosts.
However, current implementation allocates a structure on-stack to
represent the crq, initializes the members swapping them to BE, and
loads the structure swapping it from BE. This is pointless and causes
GCC warnings about ununitialized members. Get rid of the structure and
the warnings.
Signed-off-by: Michal Suchanek <msuchanek@suse.de>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>

The patch simply replaces all msleep function calls with usleep_range calls
in the generic drivers.

Tested with an Infineon TPM 1.2, using the generic tpm-tis module, for a
thousand PCR extends, we see results going from 1m57s unpatched to 40s
with the new patch. We obtain similar results when using the original and
patched tpm_infineon driver, which is also part of the patch.
Similarly with a STM TPM 2.0, using the CRB driver, it takes about 20ms per
extend unpatched and around 7ms with the new patch.

Note that the PCR consistency is untouched with this patch, each TPM has
been tested with 10 million extends and the aggregated PCR value is
continuously verified to be correct.

As an extension of this work, this could potentially and easily be applied
to other vendor's drivers. Still, these changes are not included in the
proposed patch as they are untested.
Signed-off-by: Hamza Attak <hamza@hpe.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>

Add a new powered-while-suspended property to control the behavior of the
TPM suspend/resume.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Sonny Rao <sonnyrao@chromium.org>
Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>

acpi_device_id are not supposed to change at runtime. All functions
working with acpi_device_id provided by <acpi/acpi_bus.h> work with
const acpi_device_id. So mark the non-const structs as const.

File size before:
   text	   data	    bss	    dec	    hex	filename
   4198	    608	      0	   4806	   12c6	drivers/char/tpm/tpm_crb.o

File size After adding 'const':
   text	   data	    bss	    dec	    hex	filename
   4262	    520	      0	   4782	   12ae	drivers/char/tpm/tpm_crb.o
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>

vio_device_id are not supposed to change at runtime. All functions
working with vio_device_id provided by <asm/vio.h> work with
const vio_device_id. So mark the non-const structs as const.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>

cap_inode_need_killpriv returns 1 if security.capability exists and
has a value and inode_killpriv() is required, 0 otherwise. Fix the
description of the return value to reflect this.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: Serge Hallyn <serge@hallyn.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>

Pull parisc fixes from Helge Deller:

 - Unbreak parisc bootloader by avoiding a gcc-7 optimization to convert
   multiple byte-accesses into one word-access.

 - Add missing HWPOISON page fault handler code. I completely missed
   that when I added HWPOISON support during this merge window and it
   only showed up now with the madvise07 LTP test case.

 - Fix backtrace unwinding to stop when stack start has been reached.

 - Issue warning if initrd has been loaded into memory regions with
   broken RAM modules.

 - Fix HPMC handler (parisc hardware fault handler) to comply with
   architecture specification.

 - Avoid compiler warnings about too large frame sizes.

 - Minor init-section fixes.

* 'parisc-4.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc: Unbreak bootloader due to gcc-7 optimizations
  parisc: Reintroduce option to gzip-compress the kernel
  parisc: Add HWPOISON page fault handler code
  parisc: Move init_per_cpu() into init section
  parisc: Check if initrd was loaded into broken RAM
  parisc: Add PDCE_CHECK instruction to HPMC handler
  parisc: Add wrapper for pdc_instr() firmware function
  parisc: Move start_parisc() into init section
  parisc: Stop unwinding at start of stack
  parisc: Fix too large frame size warnings

Pull rdma fixes from Doug Ledford:

 - Smattering of miscellanous fixes

 - A five patch series for i40iw that had a patch (5/5) that was larger
   than I would like, but I took it because it's needed for large scale
   users

 - An 8 patch series for bnxt_re that landed right as I was leaving on
   PTO and so had to wait until now...they are all appropriate fixes for
   -rc IMO

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (22 commits)
  bnxt_re: Don't issue cmd to delete GID for QP1 GID entry before the QP is destroyed
  bnxt_re: Fix memory leak in FRMR path
  bnxt_re: Remove RTNL lock dependency in bnxt_re_query_port
  bnxt_re: Fix race between the netdev register and unregister events
  bnxt_re: Free up devices in module_exit path
  bnxt_re: Fix compare and swap atomic operands
  bnxt_re: Stop issuing further cmds to FW once a cmd times out
  bnxt_re: Fix update of qplib_qp.mtu when modified
  i40iw: Add support for port reuse on active side connections
  i40iw: Add missing VLAN priority
  i40iw: Call i40iw_cm_disconn on modify QP to disconnect
  i40iw: Prevent multiple netdev event notifier registrations
  i40iw: Fail open if there are no available MSI-X vectors
  RDMA/vmw_pvrdma: Fix reporting correct opcodes for completion
  IB/bnxt_re: Fix frame stack compilation warning
  IB/mlx5: fix debugfs cleanup
  IB/ocrdma: fix incorrect fall-through on switch statement
  IB/ipoib: Suppress the retry related completion errors
  iw_cxgb4: remove the stid on listen create failure
  iw_cxgb4: drop listen destroy replies if no ep found
  ...

Pull networking fixes from David Miller:

 1) Fix NAPI poll list corruption in enic driver, from Christian
    Lamparter.

 2) Fix route use after free, from Eric Dumazet.

 3) Fix regression in reuseaddr handling, from Josef Bacik.

 4) Assert the size of control messages in compat handling since we copy
    it in from userspace twice. From Meng Xu.

 5) SMC layer bug fixes (missing RCU locking, bad refcounting, etc.)
    from Ursula Braun.

 6) Fix races in AF_PACKET fanout handling, from Willem de Bruijn.

 7) Don't use ARRAY_SIZE on spinlock array which might have zero
    entries, from Geert Uytterhoeven.

 8) Fix miscomputation of checksum in ipv6 udp code, from Subash Abhinov
    Kasiviswanathan.

 9) Push the ipv6 header properly in ipv6 GRE tunnel driver, from Xin
    Long.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (75 commits)
  inet: fix improper empty comparison
  net: use inet6_rcv_saddr to compare sockets
  net: set tb->fast_sk_family
  net: orphan frags on stand-alone ptype in dev_queue_xmit_nit
  MAINTAINERS: update git tree locations for ieee802154 subsystem
  net: prevent dst uses after free
  net: phy: Fix truncation of large IRQ numbers in phy_attached_print()
  net/smc: no close wait in case of process shut down
  net/smc: introduce a delay
  net/smc: terminate link group if out-of-sync is received
  net/smc: longer delay for client link group removal
  net/smc: adapt send request completion notification
  net/smc: adjust net_device refcount
  net/smc: take RCU read lock for routing cache lookup
  net/smc: add receive timeout check
  net/smc: add missing dev_put
  net: stmmac: Cocci spatch "of_table"
  lan78xx: Use default values loaded from EEPROM/OTP after reset
  lan78xx: Allow EEPROM write for less than MAX_EEPROM_SIZE
  lan78xx: Fix for eeprom read/write when device auto suspend
  ...

Merge tag 'apparmor-pr-2017-09-22' of git://git.kernel.org/pub/scm/linux/kernel/git/jj/linux-apparmor

Pull apparmor updates from John Johansen:
 "This is the apparmor pull request, similar to SELinux and seccomp.

  It's the same series that I was sent to James' security tree + one
  regression fix that was found after the series was sent to James and
  would have been sent for v4.14-rc2.

  Features:
  - in preparation for secid mapping add support for absolute root view
    based labels
  - add base infastructure for socket mediation
  - add mount mediation
  - add signal mediation

  minor cleanups and changes:
  - be defensive, ensure unconfined profiles have dfas initialized
  - add more debug asserts to apparmorfs
  - enable policy unpacking to audit different reasons for failure
  - cleanup conditional check for label in label_print
  - Redundant condition: prev_ns. in [label.c:1498]

  Bug Fixes:
  - fix regression in apparmorfs DAC access permissions
  - fix build failure on sparc caused by undeclared signals
  - fix sparse report of incorrect type assignment when freeing label proxies
  - fix race condition in null profile creation
  - Fix an error code in aafs_create()
  - Fix logical error in verify_header()
  - Fix shadowed local variable in unpack_trans_table()"

* tag 'apparmor-pr-2017-09-22' of git://git.kernel.org/pub/scm/linux/kernel/git/jj/linux-apparmor:
  apparmor: fix apparmorfs DAC access permissions
  apparmor: fix build failure on sparc caused by undeclared signals
  apparmor: fix incorrect type assignment when freeing proxies
  apparmor: ensure unconfined profiles have dfas initialized
  apparmor: fix race condition in null profile creation
  apparmor: move new_null_profile to after profile lookup fns()
  apparmor: add base infastructure for socket mediation
  apparmor: add more debug asserts to apparmorfs
  apparmor: make policy_unpack able to audit different info messages
  apparmor: add support for absolute root view based labels
  apparmor: cleanup conditional check for label in label_print
  apparmor: add mount mediation
  apparmor: add the ability to mediate signals
  apparmor: Redundant condition: prev_ns. in [label.c:1498]
  apparmor: Fix an error code in aafs_create()
  apparmor: Fix logical error in verify_header()
  apparmor: Fix shadowed local variable in unpack_trans_table()

For inline asm statements which have a CALL instruction, we list the
stack pointer as a constraint to convince GCC to ensure the frame
pointer is set up first:

  static inline void foo()
  {
	register void *__sp asm(_ASM_SP);
	asm("call bar" : "+r" (__sp))
  }

Unfortunately, that pattern causes Clang to corrupt the stack pointer.

The fix is easy: convert the stack pointer register variable to a global
variable.

It should be noted that the end result is different based on the GCC
version.  With GCC 6.4, this patch has exactly the same result as
before:

	defconfig	defconfig-nofp	distro		distro-nofp
 before	9820389		9491555		8816046		8516940
 after	9820389		9491555		8816046		8516940

With GCC 7.2, however, GCC's behavior has changed.  It now changes its
behavior based on the conversion of the register variable to a global.
That somehow convinces it to *always* set up the frame pointer before
inserting *any* inline asm.  (Therefore, listing the variable as an
output constraint is a no-op and is no longer necessary.)  It's a bit
overkill, but the performance impact should be negligible.  And in fact,
there's a nice improvement with frame pointers disabled:

	defconfig	defconfig-nofp	distro		distro-nofp
 before	9796316		9468236		9076191		8790305
 after	9796957		9464267		9076381		8785949

So in summary, while listing the stack pointer as an output constraint
is no longer necessary for newer versions of GCC, it's still needed for
older versions.
Suggested-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Reported-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Miguel Bernal Marin <miguel.bernal.marin@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/3db862e970c432ae823cf515c52b54fec8270e0e.1505942196.git.jpoimboe@redhat.comSigned-off-by: Ingo Molnar <mingo@kernel.org>

The kbuild bot reported the following warning with GCC 4.4 and a
randconfig:

  net/socket.o: warning: objtool: compat_sock_ioctl()+0x1083: stack state mismatch: cfa1=7+160 cfa2=-1+0

This is caused by another GCC non-optimization, where it backs up and
restores the stack pointer for no apparent reason:

    2f91:       48 89 e0                mov    %rsp,%rax
    2f94:       4c 89 e7                mov    %r12,%rdi
    2f97:       4c 89 f6                mov    %r14,%rsi
    2f9a:       ba 20 00 00 00          mov    $0x20,%edx
    2f9f:       48 89 c4                mov    %rax,%rsp

This issue would have been happily ignored before the following commit:

  dd88a0a0 ("objtool: Handle GCC stack pointer adjustment bug")

But now that objtool is paying attention to such stack pointer writes
to/from a register, it needs to understand them properly.  In this case
that means recognizing that the "mov %rsp, %rax" instruction is
potentially a backup of the stack pointer.
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matthias Kaehlcke <mka@chromium.org>
Cc: Miguel Bernal Marin <miguel.bernal.marin@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: dd88a0a0 ("objtool: Handle GCC stack pointer adjustment bug")
Link: http://lkml.kernel.org/r/8c7aa8e9a36fbbb6655d9d8e7cea58958c912da8.1505942196.git.jpoimboe@redhat.comSigned-off-by: Ingo Molnar <mingo@kernel.org>

Pull ACPI fixes from Rafael Wysocki:
 "These fix the initialization of resources in the ACPI WDAT watchdog
  driver, a recent regression in the ACPI device properties handling, a
  recent change in behavior causing the ACPI_HANDLE() macro to only work
  for GPL code and create a MAINTAINERS entry for ACPI PMIC drivers in
  order to specify the official reviewers for that code.

  Specifics:

   - Fix the initialization of resources in the ACPI WDAT watchdog
     driver that uses unititialized memory which causes compiler
     warnings to be triggered (Arnd Bergmann).

   - Fix a recent regression in the ACPI device properties handling that
     causes some device properties data to be skipped during enumeration
     (Sakari Ailus).

   - Fix a recent change in behavior that caused the ACPI_HANDLE() macro
     to stop working for non-GPL code which is a problem for the NVidia
     binary graphics driver, for example (John Hubbard).

   - Add a MAINTAINERS entry for the ACPI PMIC drivers to specify the
     official reviewers for that code (Rafael Wysocki)"

* tag 'acpi-4.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI: properties: Return _DSD hierarchical extension (data) sub-nodes correctly
  ACPI / bus: Make ACPI_HANDLE() work for non-GPL code again
  ACPI / watchdog: properly initialize resources
  ACPI / PMIC: Add code reviewers to MAINTAINERS

Josef Bacik says:

====================
net: fix reuseaddr regression

I introduced a regression when reworking the fastreuse port stuff that allows
bind conflicts to occur once a reuseaddr successfully opens on an existing tb.
The root cause is I reversed an if statement which caused us to set the tb as if
there were no owners on the socket if there were, which obviously is not
correct.

Dave could you please queue these changes up for -stable, I've run them through
the net tests and added another test to check for this problem specifically.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

When doing my reuseport rework I screwed up and changed a

if (hlist_empty(&tb->owners))

to

if (!hlist_empty(&tb->owners))

This is obviously bad as all of the reuseport/reuse logic was reversed,
which caused weird problems like allowing an ipv4 bind conflict if we
opened an ipv4 only socket on a port followed by an ipv6 only socket on
the same port.

Fixes: b9470c27 ("inet: kill smallest_size and smallest_port")
Reported-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In ipv6_rcv_saddr_equal() we need to use inet6_rcv_saddr(sk) for the
ipv6 compare with the fast socket information to make sure we're doing
the proper comparisons.

Fixes: 637bc8bb ("inet: reset tb->fastreuseport when adding a reuseport sk")
Reported-and-tested-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We need to set the tb->fast_sk_family properly so we can use the proper
comparison function for all subsequent reuseport bind requests.

Fixes: 637bc8bb ("inet: reset tb->fastreuseport when adding a reuseport sk")
Reported-and-tested-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Zerocopy skbs frags are copied when the skb is looped to a local sock.
Commit 1080e512 ("net: orphan frags on receive") introduced calls
to skb_orphan_frags to deliver_skb and __netif_receive_skb for this.

With msg_zerocopy, these skbs can also exist in the tx path and thus
loop from dev_queue_xmit_nit. This already calls deliver_skb in its
loop. But it does not orphan before a separate pt_prev->func().

Add the missing skb_orphan_frags_rx.

Changes
  v1->v2: handle skb_orphan_frags_rx failure

Fixes: 1f8b977a ("sock: enable MSG_ZEROCOPY")
Signed-off-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull power management fixes from Rafael Wysocki:
 "These fix a cpufreq regression introduced by recent changes related to
  the generic DT driver, an initialization time memory leak in cpuidle
  on ARM, a PM core bug that may cause system suspend/resume to fail on
  some systems, a request type validation issue in the PM QoS framework
  and two documentation-related issues.

  Specifics:

   - Fix a regression in cpufreq on systems using DT as the source of
     CPU configuration information where two different code paths
     attempt to create the cpufreq-dt device object (there can be only
     one) and fix up the "compatible" matching for some TI platforms on
     top of that (Viresh Kumar, Dave Gerlach).

   - Fix an initialization time memory leak in cpuidle on ARM which
     occurs if the cpuidle driver initialization fails (Stefan Wahren).

   - Fix a PM core function that checks whether or not there are any
     system suspend/resume callbacks for a device, but forgets to check
     legacy callbacks which then may be skipped incorrectly and the
     system may crash and/or the device may become unusable after a
     suspend-resume cycle (Rafael Wysocki).

   - Fix request type validation for latency tolerance PM QoS requests
     which may lead to unexpected behavior (Jan Schönherr).

   - Fix a broken link to PM documentation from a header file and a typo
     in a PM document (Geert Uytterhoeven, Rafael Wysocki)"

* tag 'pm-4.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  cpufreq: ti-cpufreq: Support additional am43xx platforms
  ARM: cpuidle: Avoid memleak if init fail
  cpufreq: dt-platdev: Add some missing platforms to the blacklist
  PM: core: Fix device_pm_check_callbacks()
  PM: docs: Drop an excess character from devices.rst
  PM / QoS: Use the correct variable to check the QoS request type
  driver core: Fix link to device power management documentation

Pull input fixes from Dmitry Torokhov:

 - fixes for two long standing issues (lock up and a crash) in force
   feedback handling in uinput driver

 - tweak to firmware update timing in Elan I2C touchpad driver.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: elan_i2c - extend Flash-Write delay
  Input: uinput - avoid crash when sending FF request to device going away
  Input: uinput - avoid FF flush when destroying device

Pull seccomp updates from Kees Cook:
 "Major additions:

   - sysctl and seccomp operation to discover available actions
     (tyhicks)

   - new per-filter configurable logging infrastructure and sysctl
     (tyhicks)

   - SECCOMP_RET_LOG to log allowed syscalls (tyhicks)

   - SECCOMP_RET_KILL_PROCESS as the new strictest possible action

   - self-tests for new behaviors"

[ This is the seccomp part of the security pull request during the merge
  window that was nixed due to unrelated problems   - Linus ]

* tag 'seccomp-v4.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  samples: Unrename SECCOMP_RET_KILL
  selftests/seccomp: Test thread vs process killing
  seccomp: Implement SECCOMP_RET_KILL_PROCESS action
  seccomp: Introduce SECCOMP_RET_KILL_PROCESS
  seccomp: Rename SECCOMP_RET_KILL to SECCOMP_RET_KILL_THREAD
  seccomp: Action to log before allowing
  seccomp: Filter flag to log all actions except SECCOMP_RET_ALLOW
  seccomp: Selftest for detection of filter flag support
  seccomp: Sysctl to configure actions that are allowed to be logged
  seccomp: Operation for checking if an action is available
  seccomp: Sysctl to display available actions
  seccomp: Provide matching filter for introspection
  selftests/seccomp: Refactor RET_ERRNO tests
  selftests/seccomp: Add simple seccomp overhead benchmark
  selftests/seccomp: Add tests for basic ptrace actions