- 05 Oct, 2012 13 commits
-
-
Paul Mackerras authored
This is printed once for every RMA or HPT region that get preallocated. If one preallocates hundreds of such regions (in order to run hundreds of KVM guests), that gets rather painful, so make it a bit quieter. Signed-off-by:
Paul Mackerras <paulus@samba.org> Signed-off-by:
Alexander Graf <agraf@suse.de>
-
Alexander Graf authored
Our mapping code assumes that TLB0 entries are always mapped. However, after calling clear_tlb_refs() this is no longer the case. Map them dynamically if we find an entry unmapped in TLB0. Signed-off-by: -
Alexander Graf authored
We're already counting remote TLB flushes in a variable, but don't export it to user space yet. Do so, so we know what's going on. Signed-off-by: -
Alexander Graf authored
Semantically, the "SYNC" cap means that we have mmu notifiers available. Express this in our #ifdef'ery around the feature, so that we can be sure we don't miss out on ppc targets when they get their implementation. Signed-off-by: -
Alexander Graf authored
We want to have tracing information on guest exits for booke as well as book3s. Since most information is identical, use a common trace point. Signed-off-by: -
Liu Yu-B13201 authored
Signed-off-by:
Liu Yu <yu.liu@freescale.com> Signed-off-by:
Stuart Yoder <stuart.yoder@freescale.com> Signed-off-by:
-
Scott Wood authored
Signed-off-by:
Scott Wood <scottwood@freescale.com> Signed-off-by:
-
Stuart Yoder authored
Signed-off-by:
-
Liu Yu-B13201 authored
Signed-off-by:
Varun Sethi <Varun.Sethi@freescale.com> Signed-off-by:
-
Liu Yu-B13201 authored
And add a new flag definition in kvm_ppc_pvinfo to indicate whether the host supports the EV_IDLE hcall. Signed-off-by:
-
Stuart Yoder authored
Signed-off-by:
-
Stuart Yoder authored
Signed-off-by:
-
Stuart Yoder authored
Signed-off-by:
-
- 27 Sep, 2012 1 commit
-
-
Christian Borntraeger authored
Recent changes (KVM: make processes waiting on vcpu mutex killable) now requires to check the return value of vcpu_load. This triggered a warning in s390 specific kvm code. Turns out that we can actually remove the put/load, since schedule will do the right thing via the preempt notifiers. Reported-by:
Fengguang Wu <fengguang.wu@intel.com> Signed-off-by:
Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by:
Avi Kivity <avi@redhat.com>
-
- 23 Sep, 2012 2 commits
-
-
Jan Kiszka authored
If we reset a vcpu on INIT, we so far overwrote dr7 as provided by KVM_SET_GUEST_DEBUG, and we also cleared switch_db_regs unconditionally. Fix this by saving the dr7 used for guest debugging and calculating the effective register value as well as switch_db_regs on any potential change. This will change to focus of the set_guest_debug vendor op to update_dp_bp_intercept. Found while trying to stop on start_secondary. Signed-off-by:
Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by:
-
Alex Williamson authored
To emulate level triggered interrupts, add a resample option to KVM_IRQFD. When specified, a new resamplefd is provided that notifies the user when the irqchip has been resampled by the VM. This may, for instance, indicate an EOI. Also in this mode, posting of an interrupt through an irqfd only asserts the interrupt. On resampling, the interrupt is automatically de-asserted prior to user notification. This enables level triggered interrupts to be posted and re-enabled from vfio with no userspace intervention. All resampling irqfds can make use of a single irq source ID, so we reserve a new one for this interface. Signed-off-by:
Alex Williamson <alex.williamson@redhat.com> Signed-off-by:
-
- 20 Sep, 2012 12 commits
-
-
Gleb Natapov authored
Most interrupt are delivered to only one vcpu. Use pre-build tables to find interrupt destination instead of looping through all vcpus. In case of logical mode loop only through vcpus in a logical cluster irq is sent to. Signed-off-by:
Gleb Natapov <gleb@redhat.com> Acked-by:
Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
-
Avi Kivity authored
* queue: KVM: MMU: Eliminate pointless temporary 'ac' KVM: MMU: Avoid access/dirty update loop if all is well KVM: MMU: Eliminate eperm temporary KVM: MMU: Optimize is_last_gpte() KVM: MMU: Simplify walk_addr_generic() loop KVM: MMU: Optimize pte permission checks KVM: MMU: Update accessed and dirty bits after guest pagetable walk KVM: MMU: Move gpte_access() out of paging_tmpl.h KVM: MMU: Optimize gpte_access() slightly KVM: MMU: Push clean gpte write protection out of gpte_access() KVM: clarify kvmclock documentation KVM: make processes waiting on vcpu mutex killable KVM: SVM: Make use of asm.h KVM: VMX: Make use of asm.h KVM: VMX: Make lto-friendly Signed-off-by: -
Avi Kivity authored
'ac' essentially reconstructs the 'access' variable we already have, except for the PFERR_PRESENT_MASK and PFERR_RSVD_MASK. As these are not used by callees, just use 'access' directly. Reviewed-by:
Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com> Signed-off-by:
-
Avi Kivity authored
Keep track of accessed/dirty bits; if they are all set, do not enter the accessed/dirty update loop. Reviewed-by:
-
Avi Kivity authored
'eperm' is no longer used in the walker loop, so we can eliminate it. Reviewed-by:
-
Avi Kivity authored
Instead of branchy code depending on level, gpte.ps, and mmu configuration, prepare everything in a bitmap during mode changes and look it up during runtime. Reviewed-by:
-
Avi Kivity authored
The page table walk is coded as an infinite loop, with a special case on the last pte. Code it as an ordinary loop with a termination condition on the last pte (large page or walk length exhausted), and put the last pte handling code after the loop where it belongs. Reviewed-by:
-
Avi Kivity authored
walk_addr_generic() permission checks are a maze of branchy code, which is performed four times per lookup. It depends on the type of access, efer.nxe, cr0.wp, cr4.smep, and in the near future, cr4.smap. Optimize this away by precalculating all variants and storing them in a bitmap. The bitmap is recalculated when rarely-changing variables change (cr0, cr4) and is indexed by the often-changing variables (page fault error code, pte access permissions). The permission check is moved to the end of the loop, otherwise an SMEP fault could be reported as a false positive, when PDE.U=1 but PTE.U=0. Noted by Xiao Guangrong. The result is short, branch-free code. Reviewed-by:
-
Avi Kivity authored
While unspecified, the behaviour of Intel processors is to first perform the page table walk, then, if the walk was successful, to atomically update the accessed and dirty bits of walked paging elements. While we are not required to follow this exactly, doing so will allow us to perform the access permissions check after the walk is complete, rather than after each walk step. (the tricky case is SMEP: a zero in any pte's U bit makes the referenced page a supervisor page, so we can't fault on a one bit during the walk itself). Reviewed-by:
-
Avi Kivity authored
We no longer rely on paging_tmpl.h defines; so we can move the function to mmu.c. Rely on zero extension to 64 bits to get the correct nx behaviour. Reviewed-by:
-
Avi Kivity authored
If nx is disabled, then is gpte[63] is set we will hit a reserved bit set fault before checking permissions; so we can ignore the setting of efer.nxe. Reviewed-by:
-
Avi Kivity authored
gpte_access() computes the access permissions of a guest pte and also write-protects clean gptes. This is wrong when we are servicing a write fault (since we'll be setting the dirty bit momentarily) but correct when instantiating a speculative spte, or when servicing a read fault (since we'll want to trap a following write in order to set the dirty bit). It doesn't seem to hurt in practice, but in order to make the code readable, push the write protection out of gpte_access() and into a new protect_clean_gpte() which is called explicitly when needed. Reviewed-by:
-
- 17 Sep, 2012 5 commits
-
-
Stefan Fritsch authored
- mention that system time needs to be added to wallclock time - positive tsc_shift means left shift, not right - mention additional 32bit right shift Signed-off-by:
Stefan Fritsch <sf@sfritsch.de> Signed-off-by:
Marcelo Tosatti <mtosatti@redhat.com>
-
Michael S. Tsirkin authored
vcpu mutex can be held for unlimited time so taking it with mutex_lock on an ioctl is wrong: one process could be passed a vcpu fd and call this ioctl on the vcpu used by another process, it will then be unkillable until the owner exits. Call mutex_lock_killable instead and return status. Note: mutex_lock_interruptible would be even nicer, but I am not sure all users are prepared to handle EINTR from these ioctls. They might misinterpret it as an error. Cleanup paths expect a vcpu that can't be used by any userspace so this will always succeed - catch bugs by calling BUG_ON. Catch callers that don't check return state by adding __must_check. Signed-off-by:
-
Avi Kivity authored
Use macros for bitness-insensitive register names, instead of rolling our own. Signed-off-by:
-
Avi Kivity authored
Use macros for bitness-insensitive register names, instead of rolling our own. Signed-off-by:
-
Avi Kivity authored
LTO (link-time optimization) doesn't like local labels to be referred to from a different function, since the two functions may be built in separate compilation units. Use an external variable instead. Signed-off-by:
-
- 12 Sep, 2012 1 commit
-
-
Takuya Yoshikawa authored
find_highest_vector() and count_vectors(): - Instead of using magic values, define and use proper macros. find_highest_vector(): - Remove likely() which is there only for historical reasons and not doing correct branch predictions anymore. Using such heuristics to optimize this function is not worth it now. Let CPUs predict things instead. - Stop checking word[0] separately. This was only needed for doing likely() optimization. - Use for loop, not while, to iterate over the register array to make the code clearer. Note that we actually confirmed that the likely() did wrong predictions by inserting debug code. Acked-by:
Takuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp> Signed-off-by:
-
- 10 Sep, 2012 2 commits
-
-
Xiao Guangrong authored
Checking the return of kvm_mmu_get_page is unnecessary since it is guaranteed by memory cache Signed-off-by:
-
Liu, Jinsong authored
KVM lapic timer and tsc deadline timer based on hrtimer, setting a leftmost node to rb tree and then do hrtimer reprogram. If hrtimer not configured as high resolution, hrtimer_enqueue_reprogram do nothing and then make kvm lapic timer and tsc deadline timer fail. Signed-off-by:
Liu, Jinsong <jinsong.liu@intel.com> Signed-off-by:
-
- 09 Sep, 2012 1 commit
-
-
Jan Kiszka authored
Signed-off-by:
-
- 06 Sep, 2012 3 commits
-
-
Michael S. Tsirkin authored
interrupt_bitmap is KVM_NR_INTERRUPTS bits in size, so just use that instead of hard-coded constants and math. Signed-off-by:
-
Gleb Natapov authored
Optimize "rep ins" by allowing emulator to write back more than one datum at a time. Introduce new operand type OP_MEM_STR which tells writeback() that dst contains pointer to an array that should be written back as opposite to just one data element. Signed-off-by:
-
Gleb Natapov authored
Remove unneeded segment argument. Address structure already has correct segment which was put there during decode. Signed-off-by:
-
