identify_descriptor() doesn't return 0 anymore and so we don't need to check the
returned value against 0.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

We are calculating descriptors expected size differently based on the type of
descriptor, that's fine but at few places we aren't taking size of the header
into account. And that looks wrong.

Lets make sure it is atleast as big as descriptor's header.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

On AP module (form factor), we don't have access to APBridge JTAG or UART.
But sometime, we still need to get log from APBridge. Add a new request in control endpoint
to get APBridge logs.
Logs can be accessed using debugfs (greybus/apb1_log).
Signed-off-by: Alexandre Bailon <abailon@baylibre.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add error messages on failures to deactivate, set and get operation
handlers as any errors would not be detected by the upper layers (either
because the callbacks are declared void or expected to return a boolean
value).
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

Add warning and refuse to set output value for pin configured as input,
as the result of such an operation is undefined.

Remove incorrect todo-comment suggesting that the driver could
implicitly switch direction as part of the call.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

Clean up allocation of line-state array.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

Use the more informative dev_err and dev_warn for messages, and make the
messages more uniform.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

Make sure to propagate any errors detected up the call chain.

This specifically means that we will detect failed connection init,
something which is now handled more gracefully by greybus core.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

Rename all struct gb_gpio_controller-pointer variables "ggc" for
consistency and readability reason.

This also fixes a bunch of lines that exceeded the 80 columns limit.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

Remove unnecessary explicit cast of line value.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

Remove overly defensive argument verification in gpio-chip callbacks. We
should trust gpiolib to get this right (or we would not even get any
callback) just like the other gpio drivers do.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

Remove redundant verification of gpio numbers (which have already been
verified in the gpio-chip callbacks) from greybus-operation helpers.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

The module reference count is incremented by gpiolib when a gpio is
requested, and the driver callbacks certainly do sleep.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

Fix set_debounce, which silently truncated the time argument to 255us
even though we support 16-bit values.

Also remove the unnecessary explicit cast when verifying the argument.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

Remove unnecessary cast of the message size in gb_connection_recv.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

Use the more informative dev_err in gb_operation_sync, which includes
the connection device name in the error message (which in turn encodes
the module, interface, bundle and cport ids).

Add missing braces to conditional-construct branches while at it.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

Remove custom connection error function and replace it with dev_err.

The standard error function provides more information in the message
prefix (e.g. includes the interface id), has a well-known semantics
(e.g. does does not add newlines to messages), and is even somewhat
shorter to type.

Note that some uses of the custom function were already adding double
newlines due to the non-standard semantics.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

Return immediately on bundle-init failure when processing SVC link up.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

Fix typo in svc_hotplug comment.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

Fix incorrect SVC handshake protocol check, which would only bail out if
both major and minor protocol versions supported by the SVC differed.

Since we currently only support one version of the protocol, upgrade the
debug message to warning and bail unless the protocol versions match
perfectly for now.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

This driver is being rewritten, but let's silence a pointer-to-int-cast
compiler warning meanwhile.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

There is no interrupt channel as such and so no need to support
->output_report().
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

To follow coding guidelines a bit :)
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

Also bring * closer to gb_interface_get_drvdata :)
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

Add gb_debugfs_get method to access to gb_debug_root dentry,
in order to use it from other greybus modules.
Signed-off-by: Alexandre Bailon <abailon@baylibre.com>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

Remove packed-attribute from line-coding struct, whose members are all
naturally aligned.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

Fix alignment of the duty and period-fields in the config request,
which should follow the which-field without any inserted padding.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

Fix alignment of the usec-field in the set-debounce request, which
should follow the which-field without any inserted padding.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

Make sure not to call connection_exit for connections that have never
been initialised (e.g. due to failure to init).

This fixes oopses due to null-dereferences and use-after-free in
connection_exit callbacks (e.g. trying to remove a gpio-chip that has
never been added) when the bundle and interface are ultimately
destroyed.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

Fix memory leak in connection_init error path.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

Fix memory leak in connection_init error path.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

This adds HID transport layer driver for Greybus. Most of the stuff is
implemented, but is untested.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

Fix unconditional re-enabling of interrupts in gb_hd_connection_find,
which can be called with local interrupts disabled from the USB
completion handler.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

When it receive an interrupt, the function gb_gpio_request_recv doesn't
use the good gpio number to get the irq number. Then, the expected irq is never fired.
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

Fix unconditional re-enabling of interrupts in various operation
functions that can all be called with local interrupts disabled from USB
completion handlers.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

We don't want to bind to the ES1 device, that would be bad.
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>