- 04 May, 2018 11 commits
-
-
Rob Taglang authored
Currently, skb->len and skb->data_len are set to the page size, not the packet size. This causes the frame check sequence to not be located at the "end" of the packet resulting in ethernet frame check errors. The driver does work currently, but stricter kernel facing networking solutions like OpenVSwitch will drop these packets as invalid. These changes set the packet size correctly so that these errors no longer occur. The length does not include the frame check sequence, so that subtraction was removed. Tested on Oracle/SUN Multithreaded 10-Gigabit Ethernet Network Controller [108e:abcd] and validated in wireshark. Signed-off-by:
Rob Taglang <rob@taglang.io> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
YU Bo authored
Making sure the headers line up properly with the actual value output of the command `cat /proc/net/netlink` Before the patch: <sk Eth Pid Groups Rmem Wmem Dump Locks Drops Inode <ffff8cd2c2f7b000 0 909 00000550 0 0 0 2 0 18946 After the patch: >sk Eth Pid Groups Rmem Wmem Dump Locks Drops Inode >0000000033203952 0 897 00000113 0 0 0 2 0 14906 Signed-off-by:
Bo YU <tsu.yubo@gmail.com> Signed-off-by:
-
Michael Chan authored
tg3_free_consistent() calls dma_free_coherent() to free tp->hw_stats under spinlock and can trigger BUG_ON() in vunmap() because vunmap() may sleep. Fix it by removing the spinlock and relying on the TG3_FLAG_INIT_COMPLETE flag to prevent race conditions between tg3_get_stats64() and tg3_free_consistent(). TG3_FLAG_INIT_COMPLETE is always cleared under tp->lock before tg3_free_consistent() and therefore tg3_get_stats64() can safely access tp->hw_stats under tp->lock if TG3_FLAG_INIT_COMPLETE is set. Fixes: f5992b72 ("tg3: Fix race condition in tg3_get_stats64().") Reported-by:
Zumeng Chen <zumeng.chen@gmail.com> Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
-
Eric Dumazet authored
syzbot caught an infinite recursion in nsh_gso_segment(). Problem here is that we need to make sure the NSH header is of reasonable length. BUG: MAX_LOCK_DEPTH too low! turning off the locking correctness validator. depth: 48 max: 48! 48 locks held by syz-executor0/10189: #0: (ptrval) (rcu_read_lock_bh){....}, at: __dev_queue_xmit+0x30f/0x34c0 net/core/dev.c:3517 #1: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #1: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #2: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #2: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #3: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #3: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #4: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #4: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #5: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #5: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #6: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #6: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #7: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #7: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #8: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #8: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #9: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #9: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #10: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #10: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #11: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #11: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #12: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #12: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #13: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #13: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #14: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #14: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #15: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #15: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #16: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #16: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #17: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #17: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #18: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #18: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #19: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #19: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #20: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #20: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #21: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #21: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #22: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #22: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #23: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #23: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #24: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #24: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #25: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #25: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #26: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #26: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #27: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #27: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #28: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #28: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #29: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #29: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #30: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #30: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #31: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #31: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 dccp_close: ABORT with 65423 bytes unread #32: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #32: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #33: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #33: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #34: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #34: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #35: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #35: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #36: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #36: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #37: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #37: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #38: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #38: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #39: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #39: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #40: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #40: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #41: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #41: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #42: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #42: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #43: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #43: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #44: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #44: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #45: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #45: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #46: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #46: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #47: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #47: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 INFO: lockdep is turned off. CPU: 1 PID: 10189 Comm: syz-executor0 Not tainted 4.17.0-rc2+ #26 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x1b9/0x294 lib/dump_stack.c:113 __lock_acquire+0x1788/0x5140 kernel/locking/lockdep.c:3449 lock_acquire+0x1dc/0x520 kernel/locking/lockdep.c:3920 rcu_lock_acquire include/linux/rcupdate.h:246 [inline] rcu_read_lock include/linux/rcupdate.h:632 [inline] skb_mac_gso_segment+0x25b/0x720 net/core/dev.c:2789 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 __skb_gso_segment+0x3bb/0x870 net/core/dev.c:2865 skb_gso_segment include/linux/netdevice.h:4025 [inline] validate_xmit_skb+0x54d/0xd90 net/core/dev.c:3118 validate_xmit_skb_list+0xbf/0x120 net/core/dev.c:3168 sch_direct_xmit+0x354/0x11e0 net/sched/sch_generic.c:312 qdisc_restart net/sched/sch_generic.c:399 [inline] __qdisc_run+0x741/0x1af0 net/sched/sch_generic.c:410 __dev_xmit_skb net/core/dev.c:3243 [inline] __dev_queue_xmit+0x28ea/0x34c0 net/core/dev.c:3551 dev_queue_xmit+0x17/0x20 net/core/dev.c:3616 packet_snd net/packet/af_packet.c:2951 [inline] packet_sendmsg+0x40f8/0x6070 net/packet/af_packet.c:2976 sock_sendmsg_nosec net/socket.c:629 [inline] sock_sendmsg+0xd5/0x120 net/socket.c:639 __sys_sendto+0x3d7/0x670 net/socket.c:1789 __do_sys_sendto net/socket.c:1801 [inline] __se_sys_sendto net/socket.c:1797 [inline] __x64_sys_sendto+0xe1/0x1a0 net/socket.c:1797 do_syscall_64+0x1b1/0x800 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x49/0xbe Fixes: c411ed85 ("nsh: add GSO support") Signed-off-by:Eric Dumazet <edumazet@google.com> Cc: Jiri Benc <jbenc@redhat.com> Reported-by:
syzbot <syzkaller@googlegroups.com> Acked-by:
Jiri Benc <jbenc@redhat.com> Signed-off-by:
-
Gustavo A. R. Silva authored
ioc_data.dev_num can be controlled by user-space, hence leading to a potential exploitation of the Spectre variant 1 vulnerability. This issue was detected with the help of Smatch: net/atm/lec.c:702 lec_vcc_attach() warn: potential spectre issue 'dev_lec' Fix this by sanitizing ioc_data.dev_num before using it to index dev_lec. Also, notice that there is another instance in which array dev_lec is being indexed using ioc_data.dev_num at line 705: lec_vcc_added(netdev_priv(dev_lec[ioc_data.dev_num]), Notice that given that speculation windows are large, the policy is to kill the speculation on the first load and not worry if it can be completed with a dependent load/store [1]. [1] https://marc.info/?l=linux-kernel&m=152449131114778&w=2 Cc: stable@vger.kernel.org Signed-off-by:
Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by:
-
Gustavo A. R. Silva authored
pool can be indirectly controlled by user-space, hence leading to a potential exploitation of the Spectre variant 1 vulnerability. This issue was detected with the help of Smatch: drivers/atm/zatm.c:1462 zatm_ioctl() warn: potential spectre issue 'zatm_dev->pool_info' (local cap) Fix this by sanitizing pool before using it to index zatm_dev->pool_info Notice that given that speculation windows are large, the policy is to kill the speculation on the first load and not worry if it can be completed with a dependent load/store [1]. [1] https://marc.info/?l=linux-kernel&m=152449131114778&w=2 Cc: stable@vger.kernel.org Signed-off-by:
-
Stefano Brivio authored
If an OVS_ATTR_NESTED attribute type is found while walking through netlink attributes, we call nlattr_set() recursively passing the length table for the following nested attributes, if different from the current one. However, once we're done with those sub-nested attributes, we should continue walking through attributes using the current table, instead of using the one related to the sub-nested attributes. For example, given this sequence: 1 OVS_KEY_ATTR_PRIORITY 2 OVS_KEY_ATTR_TUNNEL 3 OVS_TUNNEL_KEY_ATTR_ID 4 OVS_TUNNEL_KEY_ATTR_IPV4_SRC 5 OVS_TUNNEL_KEY_ATTR_IPV4_DST 6 OVS_TUNNEL_KEY_ATTR_TTL 7 OVS_TUNNEL_KEY_ATTR_TP_SRC 8 OVS_TUNNEL_KEY_ATTR_TP_DST 9 OVS_KEY_ATTR_IN_PORT 10 OVS_KEY_ATTR_SKB_MARK 11 OVS_KEY_ATTR_MPLS we switch to the 'ovs_tunnel_key_lens' table on attribute #3, and we don't switch back to 'ovs_key_lens' while setting attributes #9 to #11 in the sequence. As OVS_KEY_ATTR_MPLS evaluates to 21, and the array size of 'ovs_tunnel_key_lens' is 15, we also get this kind of KASan splat while accessing the wrong table: [ 7654.586496] ================================================================== [ 7654.594573] BUG: KASAN: global-out-of-bounds in nlattr_set+0x164/0xde9 [openvswitch] [ 7654.603214] Read of size 4 at addr ffffffffc169ecf0 by task handler29/87430 [ 7654.610983] [ 7654.612644] CPU: 21 PID: 87430 Comm: handler29 Kdump: loaded Not tainted 3.10.0-866.el7.test.x86_64 #1 [ 7654.623030] Hardware name: Dell Inc. PowerEdge R730/072T6D, BIOS 2.1.7 06/16/2016 [ 7654.631379] Call Trace: [ 7654.634108] [<ffffffffb65a7c50>] dump_stack+0x19/0x1b [ 7654.639843] [<ffffffffb53ff373>] print_address_description+0x33/0x290 [ 7654.647129] [<ffffffffc169b37b>] ? nlattr_set+0x164/0xde9 [openvswitch] [ 7654.654607] [<ffffffffb53ff812>] kasan_report.part.3+0x242/0x330 [ 7654.661406] [<ffffffffb53ff9b4>] __asan_report_load4_noabort+0x34/0x40 [ 7654.668789] [<ffffffffc169b37b>] nlattr_set+0x164/0xde9 [openvswitch] [ 7654.676076] [<ffffffffc167ef68>] ovs_nla_get_match+0x10c8/0x1900 [openvswitch] [ 7654.684234] [<ffffffffb61e9cc8>] ? genl_rcv+0x28/0x40 [ 7654.689968] [<ffffffffb61e7733>] ? netlink_unicast+0x3f3/0x590 [ 7654.696574] [<ffffffffc167dea0>] ? ovs_nla_put_tunnel_info+0xb0/0xb0 [openvswitch] [ 7654.705122] [<ffffffffb4f41b50>] ? unwind_get_return_address+0xb0/0xb0 [ 7654.712503] [<ffffffffb65d9355>] ? system_call_fastpath+0x1c/0x21 [ 7654.719401] [<ffffffffb4f41d79>] ? update_stack_state+0x229/0x370 [ 7654.726298] [<ffffffffb4f41d79>] ? update_stack_state+0x229/0x370 [ 7654.733195] [<ffffffffb53fe4b5>] ? kasan_unpoison_shadow+0x35/0x50 [ 7654.740187] [<ffffffffb53fe62a>] ? kasan_kmalloc+0xaa/0xe0 [ 7654.746406] [<ffffffffb53fec32>] ? kasan_slab_alloc+0x12/0x20 [ 7654.752914] [<ffffffffb53fe711>] ? memset+0x31/0x40 [ 7654.758456] [<ffffffffc165bf92>] ovs_flow_cmd_new+0x2b2/0xf00 [openvswitch] [snip] [ 7655.132484] The buggy address belongs to the variable: [ 7655.138226] ovs_tunnel_key_lens+0xf0/0xffffffffffffd400 [openvswitch] [ 7655.145507] [ 7655.147166] Memory state around the buggy address: [ 7655.152514] ffffffffc169eb80: 00 00 00 00 00 00 00 00 00 00 fa fa fa fa fa fa [ 7655.160585] ffffffffc169ec00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 7655.168644] >ffffffffc169ec80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 fa fa [ 7655.176701] ^ [ 7655.184372] ffffffffc169ed00: fa fa fa fa 00 00 00 00 fa fa fa fa 00 00 00 05 [ 7655.192431] ffffffffc169ed80: fa fa fa fa 00 00 00 00 00 00 00 00 00 00 00 00 [ 7655.200490] ================================================================== Reported-by:
Hangbin Liu <liuhangbin@gmail.com> Fixes: 982b5270 ("openvswitch: Fix mask generation for nested attributes.") Signed-off-by:
Stefano Brivio <sbrivio@redhat.com> Reviewed-by:
Sabrina Dubroca <sd@queasysnail.net> Signed-off-by:
-
Bhadram Varka authored
It adds support for BCM89610 (Single-Port 10/100/1000BASE-T) transceiver which is used in P3310 Tegra186 platform. Signed-off-by:
Bhadram Varka <vbhadram@nvidia.com> Signed-off-by:
-
Linus Torvalds authored
Merge tag 'linux-kselftest-4.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull kselftest fixes from Shuah Khan: "This Kselftest update for 4.17-rc4 consists of a fix for a syntax error in the script that runs selftests. Mathieu Desnoyers found this bug in the script on systems running GNU Make 3.8 or older" * tag 'linux-kselftest-4.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: selftests: Fix lib.mk run_tests target shell script
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Various sockmap fixes from John Fastabend (pinned map handling, blocking in recvmsg, double page put, error handling during redirect failures, etc.) 2) Fix dead code handling in x86-64 JIT, from Gianluca Borello. 3) Missing device put in RDS IB code, from Dag Moxnes. 4) Don't process fast open during repair mode in TCP< from Yuchung Cheng. 5) Move address/port comparison fixes in SCTP, from Xin Long. 6) Handle add a bond slave's master into a bridge properly, from Hangbin Liu. 7) IPv6 multipath code can operate on unitialized memory due to an assumption that the icmp header is in the linear SKB area. Fix from Eric Dumazet. 8) Don't invoke do_tcp_sendpages() recursively via TLS, from Dave Watson. 9) Fix memory leaks in x86-64 JIT, from Daniel Borkmann. 10) RDS leaks kernel memory to userspace, from Eric Dumazet. 11) DCCP can invoke a tasklet on a freed socket, take a refcount. Also from Eric Dumazet. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (78 commits) dccp: fix tasklet usage smc: fix sendpage() call net/smc: handle unregistered buffers net/smc: call consolidation qed: fix spelling mistake: "offloded" -> "offloaded" net/mlx5e: fix spelling mistake: "loobpack" -> "loopback" tcp: restore autocorking rds: do not leak kernel memory to user land qmi_wwan: do not steal interfaces from class drivers ipv4: fix fnhe usage by non-cached routes bpf: sockmap, fix error handling in redirect failures bpf: sockmap, zero sg_size on error when buffer is released bpf: sockmap, fix scatterlist update on error path in send with apply net_sched: fq: take care of throttled flows before reuse ipv6: Revert "ipv6: Allow non-gateway ECMP for IPv6" bpf, x64: fix memleak when not converging on calls bpf, x64: fix memleak when not converging after image net/smc: restrict non-blocking connect finish 8139too: Use disable_irq_nosync() in rtl8139_poll_controller() sctp: fix the issue that the cookie-ack with auth can't get processed ... -
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linuxLinus Torvalds authored
Pull parisc fixes from Helge Deller: "Fix two section mismatches, convert to read_persistent_clock64(), add further documentation regarding the HPMC crash handler and make bzImage the default build target" * 'parisc-4.17-4' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Fix section mismatches parisc: drivers.c: Fix section mismatches parisc: time: Convert read_persistent_clock() to read_persistent_clock64() parisc: Document rules regarding checksum of HPMC handler parisc: Make bzImage default build target
-
- 03 May, 2018 16 commits
-
-
Eric Dumazet authored
syzbot reported a crash in tasklet_action_common() caused by dccp. dccp needs to make sure socket wont disappear before tasklet handler has completed. This patch takes a reference on the socket when arming the tasklet, and moves the sock_put() from dccp_write_xmit_timer() to dccp_write_xmitlet() kernel BUG at kernel/softirq.c:514! invalid opcode: 0000 [#1] SMP KASAN Dumping ftrace buffer: (ftrace buffer empty) Modules linked in: CPU: 1 PID: 17 Comm: ksoftirqd/1 Not tainted 4.17.0-rc3+ #30 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:tasklet_action_common.isra.19+0x6db/0x700 kernel/softirq.c:515 RSP: 0018:ffff8801d9b3faf8 EFLAGS: 00010246 dccp_close: ABORT with 65423 bytes unread RAX: 1ffff1003b367f6b RBX: ffff8801daf1f3f0 RCX: 0000000000000000 RDX: ffff8801cf895498 RSI: 0000000000000004 RDI: 0000000000000000 RBP: ffff8801d9b3fc40 R08: ffffed0039f12a95 R09: ffffed0039f12a94 dccp_close: ABORT with 65423 bytes unread R10: ffffed0039f12a94 R11: ffff8801cf8954a3 R12: 0000000000000000 R13: ffff8801d9b3fc18 R14: dffffc0000000000 R15: ffff8801cf895490 FS: 0000000000000000(0000) GS:ffff8801daf00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000001b2bc28000 CR3: 00000001a08a9000 CR4: 00000000001406e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: tasklet_action+0x1d/0x20 kernel/softirq.c:533 __do_softirq+0x2e0/0xaf5 kernel/softirq.c:285 dccp_close: ABORT with 65423 bytes unread run_ksoftirqd+0x86/0x100 kernel/softirq.c:646 smpboot_thread_fn+0x417/0x870 kernel/smpboot.c:164 kthread+0x345/0x410 kernel/kthread.c:238 ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:412 Code: 48 8b 85 e8 fe ff ff 48 8b 95 f0 fe ff ff e9 94 fb ff ff 48 89 95 f0 fe ff ff e8 81 53 6e 00 48 8b 95 f0 fe ff ff e9 62 fb ff ff <0f> 0b 48 89 cf 48 89 8d e8 fe ff ff e8 64 53 6e 00 48 8b 8d e8 RIP: tasklet_action_common.isra.19+0x6db/0x700 kernel/softirq.c:515 RSP: ffff8801d9b3faf8 Fixes: dc841e30 ("dccp: Extend CCID packet dequeueing interface") Signed-off-by:
-
David S. Miller authored
Ursula Braun says: ==================== net/smc: fixes 2018/05/03 here are smc fixes for 2 problems: * receive buffers in SMC must be registered. If registration fails these buffers must not be kept within the link group for reuse. Patch 1 is a preparational patch; patch 2 contains the fix. * sendpage: do not hold the sock lock when calling kernel_sendpage() or sock_no_sendpage() ==================== Signed-off-by: -
Stefan Raspl authored
The sendpage() call grabs the sock lock before calling the default implementation - which tries to grab it once again. Signed-off-by:
Stefan Raspl <raspl@linux.ibm.com> Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>< Signed-off-by:
-
Karsten Graul authored
When smc_wr_reg_send() fails then tag (regerr) the affected buffer and free it in smc_buf_unuse(). Signed-off-by:
Karsten Graul <kgraul@linux.ibm.com> Signed-off-by:
Ursula Braun <ubraun@linux.ibm.com> Signed-off-by:
-
Karsten Graul authored
Consolidate the call to smc_wr_reg_send() in a new function. No functional changes. Signed-off-by:
-
Colin Ian King authored
Trivial fix to spelling mistake in DP_NOTICE message Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Colin Ian King authored
Trivial fix to spelling mistake in netdev_err error message Signed-off-by:
-
git://git.infradead.org/users/hch/dma-mappingLinus Torvalds authored
Pull dma-mapping fix from Christoph Hellwig: "Fix an incorrect warning selection introduced in the last merge window" * tag 'dma-mapping-4.17-4' of git://git.infradead.org/users/hch/dma-mapping: swiotlb: fix inversed DMA_ATTR_NO_WARN test
-
Eric Dumazet authored
When adding rb-tree for TCP retransmit queue, we inadvertently broke TCP autocorking. tcp_should_autocork() should really check if the rtx queue is not empty. Tested: Before the fix : $ nstat -n;./netperf -H 10.246.7.152 -Cc -- -m 500;nstat | grep AutoCork MIGRATED TCP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 10.246.7.152 () port 0 AF_INET Recv Send Send Utilization Service Demand Socket Socket Message Elapsed Send Recv Send Recv Size Size Size Time Throughput local remote local remote bytes bytes bytes secs. 10^6bits/s % S % S us/KB us/KB 540000 262144 500 10.00 2682.85 2.47 1.59 3.618 2.329 TcpExtTCPAutoCorking 33 0.0 // Same test, but forcing TCP_NODELAY $ nstat -n;./netperf -H 10.246.7.152 -Cc -- -D -m 500;nstat | grep AutoCork MIGRATED TCP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 10.246.7.152 () port 0 AF_INET : nodelay Recv Send Send Utilization Service Demand Socket Socket Message Elapsed Send Recv Send Recv Size Size Size Time Throughput local remote local remote bytes bytes bytes secs. 10^6bits/s % S % S us/KB us/KB 540000 262144 500 10.00 1408.75 2.44 2.96 6.802 8.259 TcpExtTCPAutoCorking 1 0.0 After the fix : $ nstat -n;./netperf -H 10.246.7.152 -Cc -- -m 500;nstat | grep AutoCork MIGRATED TCP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 10.246.7.152 () port 0 AF_INET Recv Send Send Utilization Service Demand Socket Socket Message Elapsed Send Recv Send Recv Size Size Size Time Throughput local remote local remote bytes bytes bytes secs. 10^6bits/s % S % S us/KB us/KB 540000 262144 500 10.00 5472.46 2.45 1.43 1.761 1.027 TcpExtTCPAutoCorking 361293 0.0 // With TCP_NODELAY option $ nstat -n;./netperf -H 10.246.7.152 -Cc -- -D -m 500;nstat | grep AutoCork MIGRATED TCP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 10.246.7.152 () port 0 AF_INET : nodelay Recv Send Send Utilization Service Demand Socket Socket Message Elapsed Send Recv Send Recv Size Size Size Time Throughput local remote local remote bytes bytes bytes secs. 10^6bits/s % S % S us/KB us/KB 540000 262144 500 10.00 5454.96 2.46 1.63 1.775 1.174 TcpExtTCPAutoCorking 315448 0.0 Fixes: 75c119af ("tcp: implement rb-tree based retransmit queue") Signed-off-by:
Michael Wenig <mwenig@vmware.com> Tested-by:
Neal Cardwell <ncardwell@google.com> Acked-by:
Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by:
-
Eric Dumazet authored
syzbot/KMSAN reported an uninit-value in put_cmsg(), originating from rds_cmsg_recv(). Simply clear the structure, since we have holes there, or since rx_traces might be smaller than RDS_MSG_RX_DGRAM_TRACE_MAX. BUG: KMSAN: uninit-value in copy_to_user include/linux/uaccess.h:184 [inline] BUG: KMSAN: uninit-value in put_cmsg+0x600/0x870 net/core/scm.c:242 CPU: 0 PID: 4459 Comm: syz-executor582 Not tainted 4.16.0+ #87 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:17 [inline] dump_stack+0x185/0x1d0 lib/dump_stack.c:53 kmsan_report+0x142/0x240 mm/kmsan/kmsan.c:1067 kmsan_internal_check_memory+0x135/0x1e0 mm/kmsan/kmsan.c:1157 kmsan_copy_to_user+0x69/0x160 mm/kmsan/kmsan.c:1199 copy_to_user include/linux/uaccess.h:184 [inline] put_cmsg+0x600/0x870 net/core/scm.c:242 rds_cmsg_recv net/rds/recv.c:570 [inline] rds_recvmsg+0x2db5/0x3170 net/rds/recv.c:657 sock_recvmsg_nosec net/socket.c:803 [inline] sock_recvmsg+0x1d0/0x230 net/socket.c:810 ___sys_recvmsg+0x3fb/0x810 net/socket.c:2205 __sys_recvmsg net/socket.c:2250 [inline] SYSC_recvmsg+0x298/0x3c0 net/socket.c:2262 SyS_recvmsg+0x54/0x80 net/socket.c:2257 do_syscall_64+0x309/0x430 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x3d/0xa2 Fixes: 3289025a ("RDS: add receive message trace used by application") Signed-off-by:
-
Bjørn Mork authored
The USB_DEVICE_INTERFACE_NUMBER matching macro assumes that the { vendorid, productid, interfacenumber } set uniquely identifies one specific function. This has proven to fail for some configurable devices. One example is the Quectel EM06/EP06 where the same interface number can be either QMI or MBIM, without the device ID changing either. Fix by requiring the vendor-specific class for interface number based matching. Functions of other classes can and should use class based matching instead. Fixes: 03304bcb ("net: qmi_wwan: use fixed interface number matching") Signed-off-by:Bjørn Mork <bjorn@mork.no> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-traceLinus Torvalds authored
Pull tracing fixes from Steven Rostedt: "Various fixes in tracing: - Tracepoints should not give warning on OOM failures - Use special field for function pointer in trace event - Fix igrab issues in uprobes - Fixes to the new histogram triggers" * tag 'trace-v4.17-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracepoint: Do not warn on ENOMEM tracing: Add field modifier parsing hist error for hist triggers tracing: Add field parsing hist error for hist triggers tracing: Restore proper field flag printing when displaying triggers tracing: initcall: Ordered comparison of function pointers tracing: Remove igrab() iput() call from uprobes.c tracing: Fix bad use of igrab in trace_uprobe.c
-
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/inputLinus Torvalds authored
Pull input updates from Dmitry Torokhov: "Just a few driver fixes" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: atmel_mxt_ts - add missing compatible strings to OF device table Input: atmel_mxt_ts - fix the firmware update Input: atmel_mxt_ts - add touchpad button mapping for Samsung Chromebook Pro MAINTAINERS: Rakesh Iyer can't be reached anymore Input: hideep_ts - fix a typo in Kconfig Input: alps - fix reporting pressure of v3 trackstick Input: leds - fix out of bound access Input: synaptics-rmi4 - fix an unchecked out of memory error path
-
Julian Anastasov authored
Allow some non-cached routes to use non-expired fnhe: 1. ip_del_fnhe: moved above and now called by find_exception. The 4.5+ commit deed49df expires fnhe only when caching routes. Change that to: 1.1. use fnhe for non-cached local output routes, with the help from (2) 1.2. allow __mkroute_input to detect expired fnhe (outdated fnhe_gw, for example) when do_cache is false, eg. when itag!=0 for unicast destinations. 2. __mkroute_output: keep fi to allow local routes with orig_oif != 0 to use fnhe info even when the new route will not be cached into fnhe. After commit 839da4d9 ("net: ipv4: set orig_oif based on fib result for local traffic") it means all local routes will be affected because they are not cached. This change is used to solve a PMTU problem with IPVS (and probably Netfilter DNAT) setups that redirect local clients from target local IP (local route to Virtual IP) to new remote IP target, eg. IPVS TUN real server. Loopback has 64K MTU and we need to create fnhe on the local route that will keep the reduced PMTU for the Virtual IP. Without this change fnhe_pmtu is updated from ICMP but never exposed to non-cached local routes. This includes routes with flowi4_oif!=0 for 4.6+ and with flowi4_oif=any for 4.14+). 3. update_or_create_fnhe: make sure fnhe_expires is not 0 for new entries Fixes: 839da4d9 ("net: ipv4: set orig_oif based on fib result for local traffic") Fixes: d6d5e999 ("route: do not cache fib route info on local routes with oif") Fixes: deed49df ("route: check and remove route cache when we get route") Cc: David Ahern <dsahern@gmail.com> Cc: Xin Long <lucien.xin@gmail.com> Signed-off-by:
Julian Anastasov <ja@ssi.bg> Acked-by:
David Ahern <dsahern@gmail.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull SCSI fixes from James Bottomley: "Three small bug fixes: an illegally overlapping memcmp in target code, a potential infinite loop in isci under certain rare phy conditions and an ATA queue depth (performance) correction for storvsc" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: target: Fix fortify_panic kernel exception scsi: isci: Fix infinite loop in while loop scsi: storvsc: Set up correct queue depth values for IDE devices
-
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller authored
Daniel Borkmann says: ==================== pull-request: bpf 2018-05-03 The following pull-request contains BPF updates for your *net* tree. The main changes are: 1) Several BPF sockmap fixes mostly related to bugs in error path handling, that is, a bug in updating the scatterlist length / offset accounting, a missing sk_mem_uncharge() in redirect error handling, and a bug where the outstanding bytes counter sg_size was not zeroed, from John. 2) Fix two memory leaks in the x86-64 BPF JIT, one in an error path where we still don't converge after image was allocated and another one where BPF calls are used and JIT passes don't converge, from Daniel. 3) Minor fix in BPF selftests where in test_stacktrace_build_id() we drop useless args in urandom_read and we need to add a missing newline in a CHECK() error message, from Song. ==================== Signed-off-by:
-
- 02 May, 2018 13 commits
-
-
Alexei Starovoitov authored
John Fastabend says: ==================== When I added the test_sockmap to selftests I mistakenly changed the test logic a bit. The result of this was on redirect cases we ended up choosing the wrong sock from the BPF program and ended up sending to a socket that had no receive handler. The result was the actual receive handler, running on a different socket, is timing out and closing the socket. This results in errors (-EPIPE to be specific) on the sending side. Typically happening if the sender does not complete the send before the receive side times out. So depending on timing and the size of the send we may get errors. This exposed some bugs in the sockmap error path handling. This series fixes the errors. The primary issue is we did not do proper memory accounting in these cases which resulted in missing a sk_mem_uncharge(). This happened in the redirect path and in one case on the normal send path. See the three patches for the details. The other take-away from this is we need to fix the test_sockmap and also add more negative test cases. That will happen in bpf-next. Finally, I tested this using the existing test_sockmap program, the older sockmap sample test script, and a few real use cases with Cilium. All of these seem to be in working correctly. v2: fix compiler warning, drop iterator variable 'i' that is no longer used in patch 3. ==================== Signed-off-by:Alexei Starovoitov <ast@kernel.org>
-
John Fastabend authored
When a redirect failure happens we release the buffers in-flight without calling a sk_mem_uncharge(), the uncharge is called before dropping the sock lock for the redirecte, however we missed updating the ring start index. When no apply actions are in progress this is OK because we uncharge the entire buffer before the redirect. But, when we have apply logic running its possible that only a portion of the buffer is being redirected. In this case we only do memory accounting for the buffer slice being redirected and expect to be able to loop over the BPF program again and/or if a sock is closed uncharge the memory at sock destruct time. With an invalid start index however the program logic looks at the start pointer index, checks the length, and when seeing the length is zero (from the initial release and failure to update the pointer) aborts without uncharging/releasing the remaining memory. The fix for this is simply to update the start index. To avoid fixing this error in two locations we do a small refactor and remove one case where it is open-coded. Then fix it in the single function. Signed-off-by:
John Fastabend <john.fastabend@gmail.com> Signed-off-by:
-
John Fastabend authored
When an error occurs during a redirect we have two cases that need to be handled (i) we have a cork'ed buffer (ii) we have a normal sendmsg buffer. In the cork'ed buffer case we don't currently support recovering from errors in a redirect action. So the buffer is released and the error should _not_ be pushed back to the caller of sendmsg/sendpage. The rationale here is the user will get an error that relates to old data that may have been sent by some arbitrary thread on that sock. Instead we simple consume the data and tell the user that the data has been consumed. We may add proper error recovery in the future. However, this patch fixes a bug where the bytes outstanding counter sg_size was not zeroed. This could result in a case where if the user has both a cork'ed action and apply action in progress we may incorrectly call into the BPF program when the user expected an old verdict to be applied via the apply action. I don't have a use case where using apply and cork at the same time is valid but we never explicitly reject it because it should work fine. This patch ensures the sg_size is zeroed so we don't have this case. In the normal sendmsg buffer case (no cork data) we also do not zero sg_size. Again this can confuse the apply logic when the logic calls into the BPF program when the BPF programmer expected the old verdict to remain. So ensure we set sg_size to zero here as well. And additionally to keep the psock state in-sync with the sk_msg_buff release all the memory as well. Previously we did this before returning to the user but this left a gap where psock and sk_msg_buff states were out of sync which seems fragile. No additional overhead is taken here except for a call to check the length and realize its already been freed. This is in the error path as well so in my opinion lets have robust code over optimized error paths. Signed-off-by:
-
John Fastabend authored
When the call to do_tcp_sendpage() fails to send the complete block requested we either retry if only a partial send was completed or abort if we receive a error less than or equal to zero. Before returning though we must update the scatterlist length/offset to account for any partial send completed. Before this patch we did this at the end of the retry loop, but this was buggy when used while applying a verdict to fewer bytes than in the scatterlist. When the scatterlist length was being set we forgot to account for the apply logic reducing the size variable. So the result was we chopped off some bytes in the scatterlist without doing proper cleanup on them. This results in a WARNING when the sock is tore down because the bytes have previously been charged to the socket but are never uncharged. The simple fix is to simply do the accounting inside the retry loop subtracting from the absolute scatterlist values rather than trying to accumulate the totals and subtract at the end. Reported-by:
-
Eric Dumazet authored
Normally, a socket can not be freed/reused unless all its TX packets left qdisc and were TX-completed. However connect(AF_UNSPEC) allows this to happen. With commit fc59d5bd ("pkt_sched: fq: clear time_next_packet for reused flows") we cleared f->time_next_packet but took no special action if the flow was still in the throttled rb-tree. Since f->time_next_packet is the key used in the rb-tree searches, blindly clearing it might break rb-tree integrity. We need to make sure the flow is no longer in the rb-tree to avoid this problem. Fixes: fc59d5bd ("pkt_sched: fq: clear time_next_packet for reused flows") Signed-off-by:
-
Ido Schimmel authored
This reverts commit edd7ceb7 ("ipv6: Allow non-gateway ECMP for IPv6"). Eric reported a division by zero in rt6_multipath_rebalance() which is caused by above commit that considers identical local routes to be siblings. The division by zero happens because a nexthop weight is not set for local routes. Revert the commit as it does not fix a bug and has side effects. To reproduce: # ip -6 address add 2001:db8::1/64 dev dummy0 # ip -6 address add 2001:db8::1/64 dev dummy1 Fixes: edd7ceb7 ("ipv6: Allow non-gateway ECMP for IPv6") Signed-off-by:
Ido Schimmel <idosch@mellanox.com> Reported-by:
Eric Dumazet <eric.dumazet@gmail.com> Tested-by:
-
Helge Deller authored
Fix three section mismatches: 1) Section mismatch in reference from the function ioread8() to the function .init.text:pcibios_init_bridge() 2) Section mismatch in reference from the function free_initmem() to the function .init.text:map_pages() 3) Section mismatch in reference from the function ccio_ioc_init() to the function .init.text:count_parisc_driver() Signed-off-by:Helge Deller <deller@gmx.de>
-
Helge Deller authored
Fix two section mismatches in drivers.c: 1) Section mismatch in reference from the function alloc_tree_node() to the function .init.text:create_tree_node(). 2) Section mismatch in reference from the function walk_native_bus() to the function .init.text:alloc_pa_dev(). Signed-off-by: -
Alexei Starovoitov authored
Daniel Borkmann says: ==================== Fix two memory leaks in x86 JIT. For details, please see individual patches in this series. Thanks! ==================== Signed-off-by: -
Daniel Borkmann authored
The JIT logic in jit_subprogs() is as follows: for all subprogs we allocate a bpf_prog_alloc(), populate it (prog->is_func = 1 here), and pass it to bpf_int_jit_compile(). If a failure occurred during JIT and prog->jited is not set, then we bail out from attempting to JIT the whole program, and punt to the interpreter instead. In case JITing went successful, we fixup BPF call offsets and do another pass to bpf_int_jit_compile() (extra_pass is true at that point) to complete JITing calls. Given that requires to pass JIT context around addrs and jit_data from x86 JIT are freed in the extra_pass in bpf_int_jit_compile() when calls are involved (if not, they can be freed immediately). However, if in the original pass, the JIT image didn't converge then we leak addrs and jit_data since image itself is NULL, the prog->is_func is set and extra_pass is false in that case, meaning both will become unreachable and are never cleaned up, therefore we need to free as well on !image. Only x64 JIT is affected. Fixes: 1c2a088a ("bpf: x64: add JIT support for multi-function programs") Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Acked-by:
-
Daniel Borkmann authored
While reviewing x64 JIT code, I noticed that we leak the prior allocated JIT image in the case where proglen != oldproglen during the JIT passes. Prior to the commit e0ee9c12 ("x86: bpf_jit: fix two bugs in eBPF JIT compiler") we would just break out of the loop, and using the image as the JITed prog since it could only shrink in size anyway. After e0ee9c12, we would bail out to out_addrs label where we free addrs and jit_data but not the image coming from bpf_jit_binary_alloc(). Fixes: e0ee9c12 ("x86: bpf_jit: fix two bugs in eBPF JIT compiler") Signed-off-by:
-
Ursula Braun authored
The smc_poll code tries to finish connect() if the socket is in state SMC_INIT and polling of the internal CLC-socket returns with EPOLLOUT. This makes sense for a select/poll call following a connect call, but not without preceding connect(). With this patch smc_poll starts connect logic only, if the CLC-socket is no longer in its initial state TCP_CLOSE. In addition, a poll error on the internal CLC-socket is always propagated to the SMC socket. With this patch the code path mentioned by syzbot https://syzkaller.appspot.com/bug?extid=03faa2dc16b8b64be396 is no longer possible. Signed-off-by:
-
Ingo Molnar authored
Use disable_irq_nosync() instead of disable_irq() as this might be called in atomic context with netpoll. Signed-off-by:
Ingo Molnar <mingo@elte.hu> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by:
-
