On-going operations were not aborted properly
and required locks were not taken.
Signed-off-by: Hamad Kadmany <qca_hkadmany@qca.qualcomm.com>
Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>

FW capabilities are currently retrieved only during module
initialization, but userspace can replace the firmware while
interface is down, so refresh the FW capabilities when
interface is up (after FW is loaded) to ensure driver
functionality matches the loaded FW.
Signed-off-by: Lior David <qca_liord@qca.qualcomm.com>
Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>

Upon sending/receiving WMI commands/events, print human readable
names in addition to id for easier debugging.
Signed-off-by: Dedy Lansky <qca_dlansky@qca.qualcomm.com>
Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>

Allow run-time suspend when interface is down, keep card alive when
interface is up.
If driver is in wmi only or debug_fw mode run-time PM won't suspend.
Signed-off-by: Lazar Alexei <qca_ailizaro@qca.qualcomm.com>
Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>

Handle tdls peer events from the target. TDLS events for the peer
could be discover, teardown, etc. As of now, adding the logic to
handle tdls teardown events alone.

Teardown due to peer traffic indication(PTR) timeout is one such
teardown event from the target.

Tested this change on QCA9888 with 10.4-3.5.1-00018 fw version.
Signed-off-by: Manikanta Pubbisetty <mpubbise@qti.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>

It is required to update the teardown state of the peer when
a tdls link with that peer is terminated. This information is
useful for the target to perform some cleanups wrt the tdls peer.

Without proper cleanup, target assumes that the peer is connected and
blocks future connection requests, updating the teardown state of the
peer addresses the problem.

Tested this change on QCA9888 with 10.4-3.5.1-00018 fw version.
Signed-off-by: Manikanta Pubbisetty <mpubbise@qti.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>

Commit 4ca18078 ("ath10k: disable wake_tx_queue for older devices")
disables the use of the mac80211 TXQs for some devices because of a theoretical
throughput regression. The original regression report[1] was related to
fq_codel qdisc drop performance, which was fixed in commit 9d18562a
("fq_codel: add batch ability to fq_codel_drop()"). Since then, we have not
seen the TXQ-related regression, so it should be safe to re-enable TXQs.

[1] http://lists.infradead.org/pipermail/ath10k/2016-April/007266.htmlSigned-off-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>

Make use of the swap macro and remove unnecessary variable temp.
This makes the code easier to read and maintain.

This code was detected with the help of Coccinelle.
Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>

This is not supported anymore, devices needing a MAC address
just assign one at random, it's just a driver pecularity.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

David Miller says:

====================
net: Significantly shrink the size of routes.

Through a combination of several things, our route structures are
larger than they need to be.

Mostly this stems from having members in dst_entry which are only used
by one class of routes.  So the majority of the work in this series is
about "un-commoning" these members and pushing them into the type
specific structures.

Unfortunately, IPSEC needed the most surgery.  The majority of the
changes here had to do with bundle creation and management.

The other issue is the refcount alignment in dst_entry.  Once we get
rid of the not-so-common members, it really opens the door to removing
that alignment entirely.

I think the new layout looks really nice, so I'll reproduce it here:

	struct net_device       *dev;
	struct  dst_ops	        *ops;
	unsigned long		_metrics;
	unsigned long           expires;
	struct xfrm_state	*xfrm;
	int			(*input)(struct sk_buff *);
	int			(*output)(struct net *net, struct sock *sk, struct sk_buff *skb);
	unsigned short		flags;
	short			obsolete;
	unsigned short		header_len;
	unsigned short		trailer_len;
	atomic_t		__refcnt;
	int			__use;
	unsigned long		lastuse;
	struct lwtunnel_state   *lwtstate;
	struct rcu_head		rcu_head;
	short			error;
	short			__pad;
	__u32			tclassid;

(This is for 64-bit, on 32-bit the __refcnt comes at the very end)

So, the good news:

1) struct dst_entry shrinks from 160 to 112 bytes.

2) struct rtable shrinks from 216 to 168 bytes.

3) struct rt6_info shrinks from 384 to 320 bytes.

Enjoy.

v2:
	Collapse some patches logically based upon feedback.
	Fix the strange patch #7.

v3:	xfrm_dst_path() needs inline keyword
	Properly align __refcnt on 32-bit.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

There are no more users.
Signed-off-by: David S. Miller <davem@davemloft.net>
Reviewed-by: Eric Dumazet <edumazet@google.com>

While building ipsec bundles, blocks of xfrm dsts are linked together
using dst->next from bottom to the top.

The only thing this is used for is initializing the pmtu values of the
xfrm stack, and for updating the mtu values at xfrm_bundle_ok() time.

The bundle pmtu entries must be processed in this order so that pmtu
values lower in the stack of routes can propagate up to the higher
ones.

Avoid using dst->next by simply maintaining an array of dst pointers
as we already do for the xfrm_state objects when building the bundle.
Signed-off-by: David S. Miller <davem@davemloft.net>
Reviewed-by: Eric Dumazet <edumazet@google.com>

We have padding to try and align the refcount on a separate cache
line.  But after several simplifications the padding has increased
substantially.

So now it's easy to change the layout to get rid of the padding
entirely.

We group the write-heavy __refcnt and __use with less often used
items such as the rcu_head and the error code.
Signed-off-by: David S. Miller <davem@davemloft.net>
Reviewed-by: Eric Dumazet <edumazet@google.com>

The first member of an IPSEC route bundle chain sets it's dst->path to
the underlying ipv4/ipv6 route that carries the bundle.

Stated another way, if one were to follow the xfrm_dst->child chain of
the bundle, the final non-NULL pointer would be the path and point to
either an ipv4 or an ipv6 route.

This is largely used to make sure that PMTU events propagate down to
the correct ipv4 or ipv6 route.

When we don't have the top of an IPSEC bundle 'dst->path == dst'.

Move it down into xfrm_dst and key off of dst->xfrm.
Signed-off-by: David S. Miller <davem@davemloft.net>
Reviewed-by: Eric Dumazet <edumazet@google.com>

The dst->from value is only used by ipv6 routes to track where
a route "came from".

Any time we clone or copy a core ipv6 route in the ipv6 routing
tables, we have the copy/clone's ->from point to the base route.

This is used to handle route expiration properly.

Only ipv6 uses this mechanism, and only ipv6 code references
it.  So it is safe to move it into rt6_info.
Signed-off-by: David S. Miller <davem@davemloft.net>
Reviewed-by: Eric Dumazet <edumazet@google.com>

XFRM bundle child chains look like this:

	xdst1 --> xdst2 --> xdst3 --> path_dst

All of xdstN are xfrm_dst objects and xdst->u.dst.xfrm is non-NULL.
The final child pointer in the chain, here called 'path_dst', is some
other kind of route such as an ipv4 or ipv6 one.

The xfrm output path pops routes, one at a time, via the child
pointer, until we hit one which has a dst->xfrm pointer which
is NULL.

We can easily preserve the above mechanisms with child sitting
only in the xfrm_dst structure.  All children in the chain
before we break out of the xfrm_output() loop have dst->xfrm
non-NULL and are therefore xfrm_dst objects.

Since we break out of the loop when we find dst->xfrm NULL, we
will not try to dereference 'dst' as if it were an xfrm_dst.
Signed-off-by: David S. Miller <davem@davemloft.net>

This will make a future change moving the dst->child pointer less
invasive.
Signed-off-by: David S. Miller <davem@davemloft.net>
Reviewed-by: Eric Dumazet <edumazet@google.com>

Only IPSEC routes have a non-NULL dst->child pointer.  And IPSEC
routes are identified by a non-NULL dst->xfrm pointer.
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: David S. Miller <davem@davemloft.net>
Reviewed-by: Eric Dumazet <edumazet@google.com>

Signed-off-by: David S. Miller <davem@davemloft.net>
Reviewed-by: Eric Dumazet <edumazet@google.com>

Delete it.
Signed-off-by: David S. Miller <davem@davemloft.net>
Reviewed-by: Eric Dumazet <edumazet@google.com>

In xmit, it is very impossible that TX_ERROR occurs. So using
unlikely optimizes the xmit process.

CC: Srinivas Eeda <srinivas.eeda@oracle.com>
CC: Joe Jin <joe.jin@oracle.com>
CC: Junxiao Bi <junxiao.bi@oracle.com>
Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net/atm/mpoa_* files use 'struct timeval' to store event
timestamps. struct timeval uses a 32-bit seconds field which will
overflow in the year 2038 and beyond. Morever, the timestamps are being
compared only to get seconds elapsed, so struct timeval which stores
a seconds and microseconds field is an overkill. This patch replaces
the use of struct timeval with time64_t to store a 64-bit seconds field.
Signed-off-by: Tina Ruchandani <ruchandani.tina@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

There are several statements that have incorrect indentation. Fix
these.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

timespec is deprecated because of the y2038 overflow, so let's convert
this one to ktime_get_ts64(). The code is already safe even on 32-bit
architectures, since it uses monotonic times. On 64-bit architectures,
nothing changes, while on 32-bit architectures this avoids one
type conversion.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

netxen_collect_minidump() evidently just wants to get a monotonic
timestamp. Using jiffies_to_timespec(jiffies, &ts) is not
appropriate here, since it will overflow after 2^32 jiffies,
which may be as short as 49 days of uptime.

ktime_get_seconds() is the correct interface here.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

Previously phy_id was u32 and phy_id_mask was unsigned int. As the
phy_id_mask defines the important bits of the phy_id (and is therefore
the same size) these two variables should be the same data type.
Signed-off-by: Richard Leitner <richard.leitner@skidata.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

No need to reinvent the wheel, we have bus_find_device_by_name().

Cc: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

on T81 there are only 4 cores, hence setting max queue count to 4
would leave nothing for XDP_TX. This patch fixes this by doubling
max queue count in above scenarios.
Signed-off-by: Sunil Goutham <sgoutham@cavium.com>
Signed-off-by: cjacob <cjacob@caviumnetworks.com>
Signed-off-by: Aleksey Makarov <aleksey.makarov@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch adds support for XDP_REDIRECT. Flush is not
yet supported.
Signed-off-by: Sunil Goutham <sgoutham@cavium.com>
Signed-off-by: cjacob <cjacob@caviumnetworks.com>
Signed-off-by: Aleksey Makarov <aleksey.makarov@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull nfsd fixes from Bruce Fields:
 "I screwed up my merge window pull request; I only sent half of what I
  meant to.

  There were no new features, just bugfixes of various importance and
  some very minor cleanup, so I think it's all still appropriate for
  -rc2.

  Highlights:

   - Fixes from Trond for some races in the NFSv4 state code.

   - Fix from Naofumi Honda for a typo in the blocked lock notificiation
     code

   - Fixes from Vasily Averin for some problems starting and stopping
     lockd especially in network namespaces"

* tag 'nfsd-4.15-1' of git://linux-nfs.org/~bfields/linux: (23 commits)
  lockd: fix "list_add double add" caused by legacy signal interface
  nlm_shutdown_hosts_net() cleanup
  race of nfsd inetaddr notifiers vs nn->nfsd_serv change
  race of lockd inetaddr notifiers vs nlmsvc_rqst change
  SUNRPC: make cache_detail structures const
  NFSD: make cache_detail structures const
  sunrpc: make the function arg as const
  nfsd: check for use of the closed special stateid
  nfsd: fix panic in posix_unblock_lock called from nfs4_laundromat
  lockd: lost rollback of set_grace_period() in lockd_down_net()
  lockd: added cleanup checks in exit_net hook
  grace: replace BUG_ON by WARN_ONCE in exit_net hook
  nfsd: fix locking validator warning on nfs4_ol_stateid->st_mutex class
  lockd: remove net pointer from messages
  nfsd: remove net pointer from debug messages
  nfsd: Fix races with check_stateid_generation()
  nfsd: Ensure we check stateid validity in the seqid operation checks
  nfsd: Fix race in lock stateid creation
  nfsd4: move find_lock_stateid
  nfsd: Ensure we don't recognise lock stateids after freeing them
  ...

Pull btrfs fixes from David Sterba:
 "We've collected some fixes in since the pre-merge window freeze.

  There's technically only one regression fix for 4.15, but the rest
  seems important and candidates for stable.

   - fix missing flush bio puts in error cases (is serious, but rarely
     happens)

   - fix reporting stat::st_blocks for buffered append writes

   - fix space cache invalidation

   - fix out of bound memory access when setting zlib level

   - fix potential memory corruption when fsync fails in the middle

   - fix crash in integrity checker

   - incremetnal send fix, path mixup for certain unlink/rename
     combination

   - pass flags to writeback so compressed writes can be throttled
     properly

   - error handling fixes"

* tag 'for-4.15-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  Btrfs: incremental send, fix wrong unlink path after renaming file
  btrfs: tree-checker: Fix false panic for sanity test
  Btrfs: fix list_add corruption and soft lockups in fsync
  btrfs: Fix wild memory access in compression level parser
  btrfs: fix deadlock when writing out space cache
  btrfs: clear space cache inode generation always
  Btrfs: fix reported number of inode blocks after buffered append writes
  Btrfs: move definition of the function btrfs_find_new_delalloc_bytes
  Btrfs: bail out gracefully rather than BUG_ON
  btrfs: dev_alloc_list is not protected by RCU, use normal list_del
  btrfs: add missing device::flush_bio puts
  btrfs: Fix transaction abort during failure in btrfs_rm_dev_item
  Btrfs: add write_flags for compression bio

Pull Microblaze fix from Michal Simek:
 "Add missing header to mmu_context_mm.h"

* tag 'microblaze-4.15-rc2' of git://git.monstr.eu/linux-2.6-microblaze:
  microblaze: add missing include to mmu_context_mm.h

Pull sparc fix from David Miller:
 "Sparc T4 and later cpu bootup regression fix"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
  sparc64: Fix boot on T4 and later.

Pull networking fixes from David Miller:

 1) The forcedeth conversion from pci_*() DMA interfaces to dma_*() ones
    missed one spot. From Zhu Yanjun.

 2) Missing CRYPTO_SHA256 Kconfig dep in cfg80211, from Johannes Berg.

 3) Fix checksum offloading in thunderx driver, from Sunil Goutham.

 4) Add SPDX to vm_sockets_diag.h, from Stephen Hemminger.

 5) Fix use after free of packet headers in TIPC, from Jon Maloy.

 6) "sizeof(ptr)" vs "sizeof(*ptr)" bug in i40e, from Gustavo A R Silva.

 7) Tunneling fixes in mlxsw driver, from Petr Machata.

 8) Fix crash in fanout_demux_rollover() of AF_PACKET, from Mike
    Maloney.

 9) Fix race in AF_PACKET bind() vs. NETDEV_UP notifier, from Eric
    Dumazet.

10) Fix regression in sch_sfq.c due to one of the timer_setup()
    conversions. From Paolo Abeni.

11) SCTP does list_for_each_entry() using wrong struct member, fix from
    Xin Long.

12) Don't use big endian netlink attribute read for
    IFLA_BOND_AD_ACTOR_SYSTEM, it is in cpu endianness. Also from Xin
    Long.

13) Fix mis-initialization of q->link.clock in CBQ scheduler, preventing
    adding filters there. From Jiri Pirko.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (67 commits)
  ethernet: dwmac-stm32: Fix copyright
  net: via: via-rhine: use %p to format void * address instead of %x
  net: ethernet: xilinx: Mark XILINX_LL_TEMAC broken on 64-bit
  myri10ge: Update MAINTAINERS
  net: sched: cbq: create block for q->link.block
  atm: suni: remove extraneous space to fix indentation
  atm: lanai: use %p to format kernel addresses instead of %x
  VSOCK: Don't set sk_state to TCP_CLOSE before testing it
  atm: fore200e: use %pK to format kernel addresses instead of %x
  ambassador: fix incorrect indentation of assignment statement
  vxlan: use __be32 type for the param vni in __vxlan_fdb_delete
  bonding: use nla_get_u64 to extract the value for IFLA_BOND_AD_ACTOR_SYSTEM
  sctp: use right member as the param of list_for_each_entry
  sch_sfq: fix null pointer dereference at timer expiration
  cls_bpf: don't decrement net's refcount when offload fails
  net/packet: fix a race in packet_bind() and packet_notifier()
  packet: fix crash in fanout_demux_rollover()
  sctp: remove extern from stream sched
  sctp: force the params with right types for sctp csum apis
  sctp: force SCTP_ERROR_INV_STRM with __u32 when calling sctp_chunk_fail
  ...

If we don't put the NG4fls.o object into the same part of
the link as the generic sparc64 objects for fls() and __fls()
then the relocation in the branch we use for patching will
not fit.

Move NG4fls.o into lib-y to fix this problem.

Fixes: 46ad8d2d ("sparc64: Use sparc optimized fls and __fls for T4 and above")
Signed-off-by: David S. Miller <davem@davemloft.net>
Reported-by: Anatoly Pugachev <matorola@gmail.com>
Tested-by: Anatoly Pugachev <matorola@gmail.com>

Instead, just fall back on the new '%p' behavior which hashes the
pointer.

Otherwise, '%pK' - that was intended to mark a pointer as restricted -
just ends up leaking pointers that a normal '%p' wouldn't leak.  Which
just make the whole thing pointless.

I suspect we should actually get rid of '%pK' entirely, and make it just
work as '%p' regardless, but this is the minimal obvious fix.  People
who actually use 'kptr_restrict' should weigh in on which behavior they
want.

Cc: Tobin Harding <me@tobin.cc>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The conditional kallsym hex printing used a special fixed-width '%lx'
output (KALLSYM_FMT) in preparation for the hashing of %p, but that
series ended up adding a %px specifier to help with the conversions.

Use it, and avoid the "print pointer as an unsigned long" code.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull printk pointer hashing update from Tobin Harding:
 "Here is the patch set that implements hashing of printk specifier %p.

  First we have two clean up patches then we do the hashing. Hashing is
  done via the SipHash algorithm. The next patch adds printk specifier
  %px for printing pointers when we _really_ want to see the address i.e
  %px is functionally equivalent to %lx. Final patch in the set fixes
  KASAN since we break it by hashing %p.

  For the record here is the justification for the series:

    Currently there exist approximately 14 000 places in the Kernel
    where addresses are being printed using an unadorned %p. This
    potentially leaks sensitive information about the Kernel layout in
    memory. Many of these calls are stale, instead of fixing every call
    we hash the address by default before printing. We then add %px to
    provide a way to print the actual address. Although this is
    achievable using %lx, using %px will assist us if we ever want to
    change pointer printing behaviour. %px is more uniquely grep'able
    (there are already >50 000 uses of %lx).

    The added advantage of hashing %p is that security is now opt-out,
    if you _really_ want the address you have to work a little harder
    and use %px.

  This will of course break some users, forcing code printing needed
  addresses to be updated"

[ I do expect this to be an annoyance, and a number of %px users to be
  added for debuggability. But nobody is willing to audit existing %p
  users for information leaks, and a number of places really only use
  the pointer as an object identifier rather than really 'I need the
  address'.

  IOW - sorry for the inconvenience, but it's the least inconvenient of
  the options.    - Linus ]

* tag 'printk-hash-pointer-4.15-rc2' of git://github.com/tcharding/linux:
  kasan: use %px to print addresses instead of %p
  vsprintf: add printk specifier %px
  printk: hash addresses printed with %p
  vsprintf: refactor %pK code out of pointer()
  docs: correct documentation for %pK

This reverts commit 152e93af.

It was a nice cleanup in theory, but as Nicolai Stange points out, we do
need to make the page dirty for the copy-on-write case even when we
didn't end up making it writable, since the dirty bit is what we use to
check that we've gone through a COW cycle.
Reported-by: Michal Hocko <mhocko@kernel.org>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>