- 07 May, 2019 4 commits
-
-
Fix the kbuild test rebot reported warnings: - symbol was not declared. Should it be static? - missing braces around initializer Depends on: - https://patchwork.freedesktop.org/series/58976/Reported-by:
kbuild test robot <lkp@intel.com> Signed-off-by:
james qian wang (Arm Technology China) <james.qian.wang@arm.com> Signed-off-by:
Liviu Dudau <liviu.dudau@arm.com>
-
Fixed the warnings: Function parameter or member 'xxx' not described when make htmldocs This patch depends on: - https://patchwork.freedesktop.org/series/54448/ - https://patchwork.freedesktop.org/series/54449/ - https://patchwork.freedesktop.org/series/54450/ v2: Rebase and add reporter Reported-by:
-
CHIP set bus_width according to the HW configuration, and CORE will use it as buffer alignment. v2: Rebase Signed-off-by:
-
Add two sysfs node: core_id, config_id, user can read them to fetch the HW product information. Also, use memset to initialize config_id, rather than quirky C syntax. Courtesy of Nathan Chancellor <natechancellor@gmail.com>. Signed-off-by:
Nathan Chancellor <natechancellor@gmail.com> [Merged Nathan's patch that uses memset to initialize config_id into original patch as the fixes tag changed due to rebase, reworded the commit to reference the merged patch] Signed-off-by:
-
- 29 Apr, 2019 14 commits
-
-
Implement komeda_kms_check to add all affected_planes (even unchanged) to drm_atomic_state. since komeda need to re-calculate the resources assumption in every commit. v2: Rebase Signed-off-by:
-
Added functions: - komeda_crtc_reset - komeda_crtc_vblank_enable - komeda_crtc_vblank_disable Signed-off-by:
-
Add a new komeda_dev_func->on_off_vblank to enable/disable HW vblank event Signed-off-by:
-
Pass enable/disable command to komeda and adjust komeda hardware for enable/disable a display instance. v2: Rebase Signed-off-by:
-
These two function will be used by komeda_crtc_enable/disable to do some prepartion works when enable/disable a crtc. like enable a crtc: 1. Adjust display operation mode. 2. Enable/prepare needed clk. v2: Rebase Signed-off-by:
-
komeda_crtc_mode_valid compares the input mode->clk with main engine clk and AXI clk, and reject the mode if the required pixel clk can not be satisfied by main engine clk and AXI-clk. Signed-off-by:
-
A komeda flush is comprised two steps: 1. update pipeline/component state to HW. 2. call dev_func->flush to notify HW to kickoff the update. Signed-off-by:
-
Komeda driver treats KMS-CRTC/PLANE as user which will acquire pipeline resources, but we still need to release the unclaimed resources. crtc_atomic_check is the final check stage, so beside build a display data pipeline according the crtc_state, but still needs to release/disable the unclaimed pipeline resources. v2: Rebase Signed-off-by:
-
This function builds a display output pipeline according to crtc_state. And this change only added single pipeline support, the dual pipeline with slave enabled data flow support will be added in the following change. v2: Rebase Signed-off-by:
-
Per komeda design KMS-plane maps to komeda layer input pipeline. komeda_plane_atomic_check is for building a komeda layer input pipeline. And KMS-plane is only a user of komeda resources. so there is no real HW update for plane, but all HW update will be handled in crtc->flush. v2: Rebase Signed-off-by:
-
build_layer_data_flow builds a input pipeline according to plane_state. and in this initial stage only added this simplest pipeline usage: Layer -> compiz The scaler and layer_split will be added in the future. v2: - Rebase. - Introduce struct komeda_data_flow_cfg - Add a function komeda_component_validate_private to replace the MACRO component_validate_private Signed-off-by:
-
Initialize koemda_layer, komeda_compiz, komeda_improc and komeda_timing_ctrlr as drm private object, then track komeda private component state by drm_atomic_state. v2: - Update code after Applied commit: b962a120 ("drm/atomic: integrate modeset lock with private objects") Signed-off-by:
-
get_state_and_set_user packed get_state and set_user into one function, which get pipeline/component state for a specific pipeline/component, if success set the user to it. v2: - Rebase. - Applied commit: b962a120 ("drm/atomic: integrate modeset lock with private objects") And delete our private modeset lock for pipeline. Signed-off-by:
-
This pair of functions return the old/new private object state for the given private_obj, or NULL if the private_obj is not part of the global atomic state. Reviewed-by:
Alexandru Gheorghe <alexandru-cosmin.gheorghe@arm.com> Signed-off-by:
-
- 26 Apr, 2019 2 commits
-
-
Dave Airlie authored
Merge tag 'drm-intel-next-fixes-2019-04-25' of git://anongit.freedesktop.org/drm/drm-intel into drm-next - Use after free fix during GEM_CREATE when reporting back object size - Icelake DP register programming order fix Signed-off-by:
Dave Airlie <airlied@redhat.com> From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190425061312.GA2919@jlahtine-desk.ger.corp.intel.com
-
Dave Airlie authored
Merge tag 'drm-misc-next-fixes-2019-04-24' of git://anongit.freedesktop.org/drm/drm-misc into drm-next - fb_helper: Fix NULL deref in legacy drivers (Noralf) - leases: Ensure lessees can't connect to objects outside their perview (Daniel) - leases: Enforce that lessees hold the lease for implicitly set planes (Daniel) - leases: A few non-functional cleanups (Daniel) Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Noralf Trønnes <noralf@tronnes.org> Signed-off-by:
-
- 24 Apr, 2019 20 commits
-
-
Noralf Trønnes authored
Non-atomic drivers like ast doesn't have connector->state set resulting in a NULL pointer deref: [ 29.609593] BUG: unable to handle kernel NULL pointer dereference at 0000000000000010 [ 29.609619] Call Trace: [ 29.609630] ? drm_helper_probe_single_connector_modes+0x27f/0x680 [ 29.609640] drm_setup_crtcs+0x431/0xd80 [drm_kms_helper] [ 29.753065] __drm_fb_helper_initial_config_and_unlock+0x6f/0x6a0 [ 29.753160] ? drm_modeset_unlock_all+0x31/0x50 [drm] [ 29.765758] ast_fbdev_init+0xa8/0xc0 [ast] [ 29.765762] ast_driver_load.cold.7+0x2b3/0xe11 [ast] [ 29.765775] drm_dev_register+0x111/0x150 [drm] Fix by bailing out if the driver does not support atomic modesetting. Fixes: 09ded8af ("drm/i915/fbdev: Move intel_fb_initial_config() to fbdev helper") Reported-by:
Thomas Zimmermann <tzimmermann@suse.de> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Jani Nikula <jani.nikula@linux.intel.com> Signed-off-by:
Noralf Trønnes <noralf@tronnes.org> Reviewed-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Tested-by:
-
Daniel Vetter authored
With the previous patch drm_crtc_find will return NULL when the crtc isn't in our lease, which will then disable the plane/connector. No longer an issue since the lessor can't escape their lease terms anymore, but not quite great semantics yet either. Catch this and return -EACCES, so that at least evil test cases have a better chance of making sure the kernel works correctly. Reviewed-by:
Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190228144910.26488-8-daniel.vetter@ffwll.ch
-
Daniel Vetter authored
We need this to make sure lessees can only connect their plane/connectors to crtc objects they own. And note that this is irrespective of whether the lessor is atomic or not, lessor cannot prevent lessees from enabling atomic. Cc: stable@vger.kernel.org Cc: Keith Packard <keithp@keithp.com> Reviewed-by:
-
Daniel Vetter authored
If userspace doesn't enable universal planes, then we automatically add the primary and cursor planes. But for universal userspace there's no such check (and maybe we only want to give the lessee one plane, maybe not even the primary one), hence we need to check for the implied plane. v2: don't forget setcrtc ioctl. v3: Still allow disabling of the crtc in SETCRTC. Cc: stable@vger.kernel.org Cc: Keith Packard <keithp@keithp.com> Reviewed-by:
Boris Brezillon <boris.brezillon@collabora.com> Signed-off-by:
-
Daniel Vetter authored
The lessor is invariant over a lifetime of a lease, we don't have to grab any locks for that. Speeds up the common case of not being a lease. Cc: Keith Packard <keithp@keithp.com> Reviewed-by:
-
Daniel Vetter authored
We kzalloc. Cc: Keith Packard <keithp@keithp.com> Reviewed-by:
Mika Kuoppala <mika.kuoppala@linux.intel.com> Signed-off-by:
-
Daniel Vetter authored
We disallow subleasing, so no point checking whether the master holds all the leases - it will. Spotted while typing exhaustive igt coverage for all these corner cases. Cc: Keith Packard <keithp@keithp.com> Reviewed-by:
-
Daniel Vetter authored
Not exactly sure what's the aim here, but the canonical nil object has id == 0, we don't use negative object ids for anything. Plus all object_id are valided by the object_idr, there's nothing we need to do on top of that ENOENT check a bit further down. Spotted while typing exhaustive igt coverage for all these corner-cases. Cc: Keith Packard <keithp@keithp.com> Reviewed-by:
-
git://people.freedesktop.org/~airlied/linuxDaniel Vetter authored
Pull legacy cleanups from Dave. Signed-off-by:
-
Dave Airlie authored
This code moved in here in master, so revert it the same way. This is the same revert as 9fa24625 ("Revert "drm/i915/fbdev: Actually configure untiled displays"") in drm-fixes. Signed-off-by:
-
Imre Deak authored
Fix the order of lane, port parameters passed to the register macro. Note that this was already partly fixed by commit 37fc7845 ("drm/i915: Call MG_DP_MODE() macro with the right parameters order") While at it simplify things by using the macro directly instead of an unnecessary redirection via an array. v2: - Add a note the commit message about simplifying things. (José) Fixes: 58106b7d ("drm/i915: Make MG PHY macros semantically consistent") Cc: José Roberto de Souza <jose.souza@intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Aditya Swarup <aditya.swarup@intel.com> Signed-off-by:
Imre Deak <imre.deak@intel.com> Reviewed-by:
Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190419071026.32370-1-imre.deak@intel.com (cherry picked from commit 9c11b121) Signed-off-by:
Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
-
Chris Wilson authored
We have to avoid chasing after a userspace race! <3>[ 473.114328] BUG: KASAN: use-after-free in i915_gem_create+0x1d2/0x1f0 [i915] <3>[ 473.114389] Read of size 8 at addr ffff88815bf1d840 by task gem_flink_race/1541 <4>[ 473.114464] CPU: 1 PID: 1541 Comm: gem_flink_race Tainted: G U 5.1.0-rc4-g7d07e025e786-kasan_88+ #1 <4>[ 473.114469] Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./J4205-ITX, BIOS P1.10 09/29/2016 <4>[ 473.114474] Call Trace: <4>[ 473.114488] dump_stack+0x7c/0xbb <4>[ 473.114612] ? i915_gem_create+0x1d2/0x1f0 [i915] <4>[ 473.114621] print_address_description+0x65/0x270 <4>[ 473.114728] ? i915_gem_create+0x1d2/0x1f0 [i915] <4>[ 473.114839] ? i915_gem_create+0x1d2/0x1f0 [i915] <4>[ 473.114848] kasan_report+0x149/0x18d <4>[ 473.114962] ? i915_gem_create+0x1d2/0x1f0 [i915] <4>[ 473.115069] i915_gem_create+0x1d2/0x1f0 [i915] <4>[ 473.115176] ? i915_gem_object_create.part.28+0x4b0/0x4b0 [i915] <4>[ 473.115289] ? i915_gem_dumb_create+0x1a0/0x1a0 [i915] <4>[ 473.115297] drm_ioctl_kernel+0x192/0x260 <4>[ 473.115306] ? drm_ioctl_permit+0x280/0x280 <4>[ 473.115326] drm_ioctl+0x67c/0x960 <4>[ 473.115438] ? i915_gem_dumb_create+0x1a0/0x1a0 [i915] <4>[ 473.115448] ? drm_getstats+0x20/0x20 <4>[ 473.115459] ? __lock_acquire+0xa66/0x3fe0 <4>[ 473.115474] ? _raw_spin_unlock_irqrestore+0x39/0x60 <4>[ 473.115485] ? debug_object_active_state+0x2ea/0x4e0 <4>[ 473.115496] ? debug_show_all_locks+0x2d0/0x2d0 <4>[ 473.115513] do_vfs_ioctl+0x18d/0xfa0 <4>[ 473.115522] ? check_flags.part.27+0x440/0x440 <4>[ 473.115532] ? ioctl_preallocate+0x1a0/0x1a0 <4>[ 473.115547] ? __fget+0x2ac/0x410 <4>[ 473.115561] ? __ia32_sys_dup3+0xb0/0xb0 <4>[ 473.115569] ? rwlock_bug.part.0+0x90/0x90 <4>[ 473.115590] ksys_ioctl+0x35/0x70 <4>[ 473.115597] ? lockdep_hardirqs_off+0x1cb/0x2b0 <4>[ 473.115608] __x64_sys_ioctl+0x6a/0xb0 <4>[ 473.115614] ? lockdep_hardirqs_on+0x342/0x590 <4>[ 473.115623] do_syscall_64+0x97/0x400 <4>[ 473.115633] entry_SYSCALL_64_after_hwframe+0x49/0xbe <4>[ 473.115641] RIP: 0033:0x7fce590d55d7 <4>[ 473.115649] Code: b3 66 90 48 8b 05 b1 48 2d 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 81 48 2d 00 f7 d8 64 89 01 48 <4>[ 473.115655] RSP: 002b:00007fce4d525ba8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 <4>[ 473.115662] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007fce590d55d7 <4>[ 473.115667] RDX: 00007fce4d525c10 RSI: 00000000c010645b RDI: 0000000000000007 <4>[ 473.115672] RBP: 00007fce4d525c10 R08: 00007fce4d526700 R09: 00007fce4d526700 <4>[ 473.115677] R10: 0000000000000054 R11: 0000000000000246 R12: 00000000c010645b <4>[ 473.115682] R13: 0000000000000007 R14: 0000000000000000 R15: 00007ffe0e4a7450 <3>[ 473.115731] Allocated by task 1541: <4>[ 473.115766] kmem_cache_alloc+0xce/0x290 <4>[ 473.115895] i915_gem_object_create.part.28+0x1c/0x4b0 [i915] <4>[ 473.116000] i915_gem_create+0xe3/0x1f0 [i915] <4>[ 473.116008] drm_ioctl_kernel+0x192/0x260 <4>[ 473.116013] drm_ioctl+0x67c/0x960 <4>[ 473.116020] do_vfs_ioctl+0x18d/0xfa0 <4>[ 473.116026] ksys_ioctl+0x35/0x70 <4>[ 473.116032] __x64_sys_ioctl+0x6a/0xb0 <4>[ 473.116038] do_syscall_64+0x97/0x400 <4>[ 473.116044] entry_SYSCALL_64_after_hwframe+0x49/0xbe <3>[ 473.116071] Freed by task 1542: <4>[ 473.116101] kmem_cache_free+0xb7/0x2f0 <4>[ 473.116205] __i915_gem_free_objects+0x7d4/0xe10 [i915] <4>[ 473.116311] i915_gem_create_ioctl+0xaa/0xd0 [i915] <4>[ 473.116318] drm_ioctl_kernel+0x192/0x260 <4>[ 473.116323] drm_ioctl+0x67c/0x960 <4>[ 473.116330] do_vfs_ioctl+0x18d/0xfa0 <4>[ 473.116335] ksys_ioctl+0x35/0x70 <4>[ 473.116341] __x64_sys_ioctl+0x6a/0xb0 <4>[ 473.116347] do_syscall_64+0x97/0x400 <4>[ 473.116354] entry_SYSCALL_64_after_hwframe+0x49/0xbe Testcase: igt/gem_flink_race/flink_close Fixes: e163484a ("drm/i915: Update size upon return from GEM_CREATE") Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: Michał Winiarski <michal.winiarski@intel.com> Reviewed-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190417132507.27133-1-chris@chris-wilson.co.uk (cherry picked from commit 99534023) Signed-off-by:
-
Dave Airlie authored
This should help with some of the lifetime issues, and move us away from load/unload. Acked-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Dave Airlie authored
This just makes it easier to later embed drm into udl. Reviewed-by:
-
Dave Airlie authored
Merge tag 'exynos-drm-next-for-v5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-next Log cleanups - Correct the use of log macro in error case. - Drop unnecessary messages. - Replace DRM_ERROR/DEBUG with DRM_DEV_ERROR/DEBUG. - Print out debug messages with correct device name in vidi and ipp drivers. One trivial cleanup - Just fix checkpatch error, "foo* bar" to "foo *bar" in g2d driver. Signed-off-by:
-
Dave Airlie authored
This removes these unless legacy is enabled. The lock count init is unneeded anyways since it's kzalloc. Reviewed-by:
-
Dave Airlie authored
This places a bunch of the legacy members of drm_device into only being there when legacy is enabled. Reviewed-by:
-
Dave Airlie authored
If you don't want the legacy drivers, then lets get rid of all the legacy codepaths from the core module. This drop the size of drm.ko for me by about 10%. 380515 7422 4192 392129 5fbc1 ../../drm-next-build/drivers/gpu/drm/drm.ko 351736 7298 4192 363226 58ada ../../drm-next-build/drivers/gpu/drm/drm.ko v2: drop drm_lock as well, fix some DMA->DRM typos v3: avoid ifdefs in mainline code v4: rework ioctl defs v4.1: fix nouveau Kconfig Reviewed-by:
-
Dave Airlie authored
This could probably be done with Kconfig somehow, but I failed in my first 2 minute attempt. v2: use Kconfig better. Reviewed-by:
-
Dave Airlie authored
This moves the legacy dev reinit into the legacy misc file. Reviewed-by:
-
