There's a race window (small for hpd, 10s large for polled outputs)
where userspace could sneak in with an unrelated connnector probe
ioctl call and eat the hotplug event (since neither the hpd nor the
poll code see a state change).

To avoid this, check whether the connector state changes in all other
->detect calls (in the current helper code that's only probe_single)
and if that's the case, fire off a hotplug event. Note that we can't
directly call the hotplug event handler, since that expects that no
locks are held (due to reentrancy with the fb code to update the kms
console).

Also, this requires that drivers using the probe_single helper
function set up the poll work. All current drivers do that already,
and with the reworked hpd handling there'll be no downside to
unconditionally setting up the poll work any more.

v2: Review from Rob Clark
- Don't bail out of the output poll work immediately if it's disabled
  to make sure we deliver the delayed hoptplug events. Instead just
  jump to the tail.
- Don't scheduel the work when it's not set up. Would be a driver bug
  since using probe helpers for anything dynamic without them
  initialized makes them all noops.

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> (v1)
Cc: Rob Clark <robdclark@gmail.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Tested-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

Copying 64 bit data from user space using get_user is not supported
on all architectures, and may result in the following build error.

ERROR: "__get_user_bad" [drivers/gpu/drm/drm.ko] undefined!

Avoid the problem by using copy_from_user.

Fixes: d34f20d6 ("drm: Atomic modeset ioctl")
Cc: Rob Clark <robdclark@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

The current implementation of drm_read() faces a number of issues:

1. Upon an error, it consumes the event which may lead to the client
blocking.
2. Upon an error, it forgets about events already copied
3. If it fails to copy a single event with O_NONBLOCK it falls into a
infinite loop of reporting EAGAIN.
3. There is a race between multiple waiters and blocking reads of the
events list.

Here, we inline drm_dequeue_event() into drm_read() so that we can take
the spinlock around the list walking and event copying, and importantly
reorder the error handling to avoid the issues above.

Cc: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Testcase: igt/drm_read
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

Make drm_fb_helper_initial_config() return an int rather than a bool so
that the error can be properly propagated. While at it, update drivers
to propagate errors further rather than just ignore them.

v2:
- cirrus: No cleanup is required, the top-level cirrus_driver_load()
  will do it as part of cirrus_driver_unload() in its cleanup path.
Reported-by: Fengguang Wu <fengguang.wu@intel.com>

Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
[danvet: Squash in simplification patch from kbuild.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

commit 765d5b9c ("fbdev: fbcon: select VT_HW_CONSOLE_BINDING")
made FRAMEBUFFER_CONSOLE always select VT_HW_CONSOLE_BINDING, but forgot
to remove

	select VT_HW_CONSOLE_BINDING if FRAMEBUFFER_CONSOLE

from the individual drivers' sections that already did this before.

Remove it, also from new drivers.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

imx-drm mode fixup support, imx-hdmi bridge conversion and imx-drm cleanup

- Implement mode_fixup for a DI vertical timing limitation
- Use generic DRM OF helpers in DRM core
- Convert imx-hdmi to dw_hdmi drm_bridge and add rockchip
  driver
- Add DC use counter to fix multi-display support
- Simplify handling of DI clock flags
- A few small fixes and cleanup

* tag 'imx-drm-next-2015-01-09' of git://git.pengutronix.de/git/pza/linux: (26 commits)
  imx-drm: core: handling of DI clock flags to ipu_crtc_mode_set()
  gpu: ipu-di: Switch to DIV_ROUND_CLOSEST for DI clock divider calc
  gpu: ipu-v3: Use videomode in struct ipu_di_signal_cfg
  imx-drm: encoder prepare/mode_set must use adjusted mode
  imx-drm: ipuv3-crtc: Implement mode_fixup
  drm_modes: add drm_display_mode_to_videomode
  gpu: ipu-di: remove some non-functional code
  gpu: ipu-di: Add ipu_di_adjust_videomode()
  drm: rockchip: export functions needed by rockchip dw_hdmi bridge driver
  drm: bridge/dw_hdmi: request interrupt only after initializing the mutes
  drm: bridge/dw_hdmi: add rockchip rk3288 support
  dt-bindings: Add documentation for rockchip dw hdmi
  drm: bridge/dw_hdmi: add function dw_hdmi_phy_enable_spare
  drm: bridge/dw_hdmi: clear i2cmphy_stat0 reg in hdmi_phy_wait_i2c_done
  drm: bridge/dw_hdmi: add mode_valid support
  drm: bridge/dw_hdmi: add support for multi-byte register width access
  dt-bindings: add document for dw_hdmi
  drm: imx: imx-hdmi: move imx-hdmi to bridge/dw_hdmi
  drm: imx: imx-hdmi: split phy configuration to platform driver
  drm: imx: imx-hdmi: convert imx-hdmi to drm_bridge mode
  ...

* 'drm/next/du' of git://linuxtv.org/pinchartl/fbdev:
  drm: rcar-du: Implement support for interlaced modes
  drm: rcar-du: Clamp DPMS states to on and off
  drm: rcar-du: Enable hotplug detection on HDMI connector
  drm: rcar-du: Output HSYNC instead of CSYNC
  drm: rcar-du: Add support for external pixel clock
  drm: rcar-du: Refactor DEFR8 feature
  drm: rcar-du: Remove LVDS and HDMI encoders chaining restriction
  drm: rcar-du: Configure pitch for chroma plane of multiplanar formats
  drm: rcar-du: Don't fail probe in case of partial encoder init error
  drm: adv7511: Remove interlaced mode check

- Add support for SDMA usermode queues
- Replace logic of sub-allocating from GART buffer in amdkfd. Instead
  of using radeon_sa module, use a new module that is more suited for
  this purpose
- Add the number of watch points to amdkfd topology
- Split a function that did two things into two seperate functions.

* tag 'drm-amdkfd-next-2015-01-09' of git://people.freedesktop.org/~gabbayo/linux:
  drm/amd: Remove old radeon_sa funcs from kfd-->kgd interface
  drm/radeon: Remove old radeon_sa usage from kfd-->kgd interface
  drm/amdkfd: Using new gtt sa in amdkfd
  drm/amdkfd: Allocate gart memory using new interface
  drm/amdkfd: Fixed calculation of gart buffer size
  drm/amdkfd: Add kfd gtt sub-allocator functions
  drm/amdkfd: Add gtt sa related data to kfd_dev struct
  drm/radeon: Impl. new gtt allocate/free functions
  drm/amd: Add new kfd-->kgd interface for gart usage
  drm/radeon: Enable sdma preemption
  drm/amdkfd: Pass queue type to pqm_create_queue()
  drm/amdkfd: Identify SDMA queue in create queue ioctl
  drm/amdkfd: Add SDMA user-mode queues support to QCM
  drm/amdkfd: Add SDMA mqd support
  drm/radeon: Implement SDMA interface functions
  drm/amd: Add SDMA functions to kfd-->kgd interface
  drm/amdkfd: Process-device data creation and lookup split
  drm/amdkfd: Add number of watch points to topology

Daniel merged two things in 72a36970,
but he merged this code twice, Dan's static checker spotted it.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

- plane handling refactoring from Matt Roper and Gustavo Padovan in prep for
  atomic updates
- fixes and more patches for the seqno to request transformation from John
- docbook for fbc from Rodrigo
- prep work for dual-link dsi from Gaurav Signh
- crc fixes from Ville
- special ggtt views infrastructure from Tvrtko Ursulin
- shadow patch copying for the cmd parser from Brad Volkin
- execlist and full ppgtt by default on gen8, for testing for now

* tag 'drm-intel-next-2014-12-19' of git://anongit.freedesktop.org/drm-intel: (131 commits)
  drm/i915: Update DRIVER_DATE to 20141219
  drm/i915: Hold runtime PM during plane commit
  drm/i915: Organize bind_vma funcs
  drm/i915: Organize INSTDONE report for future.
  drm/i915: Organize PDP regs report for future.
  drm/i915: Organize PPGTT init
  drm/i915: Organize Fence registers for future enablement.
  drm/i915: tame the chattermouth (v2)
  drm/i915: Warn about missing context state workarounds only once
  drm/i915: Use true PPGTT in Gen8+ when execlists are enabled
  drm/i915: Skip gunit save/restore for cherryview
  drm/i915/chv: Use timeout mode for RC6 on chv
  drm/i915: Add GPGPU_THREADS_DISPATCHED to the register whitelist
  drm/i915: Tidy up execbuffer command parsing code
  drm/i915: Mark shadow batch buffers as purgeable
  drm/i915: Use batch length instead of object size in command parser
  drm/i915: Use batch pools with the command parser
  drm/i915: Implement a framework for batch buffer pools
  drm/i915: fix use after free during eDP encoder destroying
  drm/i915/skl: Skylake also supports DP MST
  ...

Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
Reviewed-by: Alexey Skidanov <Alexey.skidanov@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>

Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
Reviewed-by: Alexey Skidanov <Alexey.skidanov@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>

This patch change the calls throughout the amdkfd driver from the old kfd-->kgd
interface to the new kfd gtt sa inside amdkfd

v2: change the new call in sdma code that appeared because of the sdma feature
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
Reviewed-by: Alexey Skidanov <Alexey.skidanov@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>

This patch changes the calls to allocate the gart memory for amdkfd from the
old interface (radeon_sa) to the new one (kfd_gtt_sa)

The new gart sub-allocator is initialized with chunk size equal to 512 bytes.
This is because the KV MQD is 512 Bytes and most of the sub-allocations are
MQDs.
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
Reviewed-by: Alexey Skidanov <Alexey.skidanov@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>

This patch makes the gart's buffer size calculation more accurate. This buffer
is needed per GPU.

It takes into account maximum number of MQDs, runlist packets, kernel queues
and reserves 512KB for other misc allocations.

The total size is just shy of 4MB, for 32 processes and 128 queues per
process, which are the defaults for amdkfd kernel module parameters.
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
Reviewed-by: Alexey Skidanov <Alexey.skidanov@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>

This patch adds new kfd gtt sub-allocator functions that service the amdkfd
driver when it wants to use gtt memory.

The sub-allocator uses a bitmap to handle the memory area that was transferred
to it during init. It divides the memory area into chunks, according to chunk
size parameter.

The allocation function will allocate contiguous chunks from that memory area,
according to the requested size. If the requested size is smaller than the
chunk size, a single chunk will be allocated.

v2: Do some more verifications on parameters that are passed into
kfd_gtt_sa_init()
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
Reviewed-by: Alexey Skidanov <Alexey.skidanov@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>

This patch adds new fields to kfd_dev struct that are necessary for the new kfd
gtt sa module
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
Reviewed-by: Alexey Skidanov <Alexey.skidanov@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>

This patch adds the implementation of the gtt interface functions.

The allocate function will allocate a single bo, pin and map it to kernel
memory. It will return the gpu address and cpu ptr as arguments.

v2:

The bulk of the allocations in the GART is for MQDs. MQDs represent active
user-mode queues, which are on the current runlist. It is important to
remember that active queues doesn't necessarily mean scheduled/running
queues, especially if there is over-subscription of queues or more than a
single HSA process.

Because the scheduling of the user-mode queues is done by the CP firmware,
amdkfd doesn't have any indication if the queue is scheduled or not. If the
CP will try to schedule a queue, and its MQD is not present, this will
probably stuck the CP permanently, as it will load garbage from the GART
(the address of the MQD is given to the CP inside the runlist packet).

In addition, there are a couple of small allocations which also should
always be pinned - runlist packets (2 packets) and HPDs. runlist packets can
be quite large, depending on number of processes and queues.

This new allocate function represents the short/mid-term solution of limiting
the total memory consumption to around 4MB by default.

The long-term solution is to create a mechanism through which radeon/ttm can
ask amdkfd to clear GART/VRAM memory due to memory pressure.
Then, amdkfd will preempt the running queues and wait until the memory pressure
is over. After that, amdkfd will reschedule the queues.
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
Reviewed-by: Alexey Skidanov <Alexey.skidanov@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>

This patch adds two new functions to the kfd-->kgd interface:

init_gtt_mem_allocation, which allocate a large enough buffer on the amdkfd
needs, such as mqds, hpds, kernel queue, fence and runlists. This function
is only called once per GPU device. The size of the allocated buffer is
based on the maximum number of HSA processes and maximum number of queues
per HSA process (two amdkfd kernel module parameters).

free_gtt_mem, which frees a buffer that was allocated on the gart aperture.
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
Reviewed-by: Alexey Skidanov <Alexey.skidanov@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>

This patch adds to radeon the enablement of sdma preemption.
This is needed to support HWS of SDMA user-mode queues.
Signed-off-by: Ben Goz <ben.goz@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>

This patch passes the correct queue type to pqm_create_queue() instead of a
fixed KFD_QUEUE_TYPE_COMPUTE type.
Signed-off-by: Ben Goz <ben.goz@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>

This patch adds a check to the create queue ioctl path, which identifies SDMA
queue type that is sent by userspace.
Signed-off-by: Ben Goz <ben.goz@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>

This patch adds support for SDMA user-mode queues to the QCM - the Queue
management system that manages queues-per-device and queues-per-process.

v2: Remove calls to interface function that initializes sdma engines.

v3: Use the new names of some of the defines.
Signed-off-by: Ben Goz <ben.goz@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>

This patch adds support for SDMA mqd operations:
- init_mqd_sdma
- uninit_mqd_sdma
- load_mqd_sdma
- update_mqd_sdma
- destroy_mqd_sdma
- is_occupied_sdma

It also adds SDMA queue information to some private structures of amdkfd.

v3: Use the new names of some of the defines.
Signed-off-by: Ben Goz <ben.goz@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>

This patch implements the new SDMA interface functions. It also adds defines
and structures related to SDMA registers.

v2: Removed init_sdma_engines() from interface. Initialization is done in
radeon.

v3:
- Removed unused defines.
- Added SDMA_ prefix to defines that didn't have them.
Signed-off-by: Ben Goz <ben.goz@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>

This patch adds three new functions to the kfd2kgd interface:

- hqd_sdma_load() - Loads SDMA mqd to a H/W SDMA hqd slot. Used only in no HWS
                    mode.

- hqd_sdma_is_occupied() - Checks if an SDMA hqd slot is occupied. Used only
                           in no HWS mode.

- hqd_sdma_destroy() - Destructs and preempts the SDMA queue assigned to
                       that SDMA hqd slot. Used only in no HWS mode.

These functions are needed to support SDMA queues scheduling when using no HWS
mode (used for debug or bring-up).

v2: Removed init_sdma_engines() from interface. Initialization is done in
radeon.
Signed-off-by: Ben Goz <ben.goz@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>

This patch splits the current kfd_get_process_device_data() to two
functions, one that specifically creates a pdd and another one which
just do lookup.

This is done to enhance the readability and maintainability of the code.
Signed-off-by: Alexey Skidanov <Alexey.Skidanov@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>

This patch adds the number of watch points to the node capabilities in the
topology module
Signed-off-by: Alexey Skidanov <Alexey.Skidanov@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>

Next batch of atomic work. Most important is the propertification from Rob
and the nth iteration of the actual atomic ioctl originally from Ville.
Big differences compared to earlier revisions:
- Core properties are now fully handled by the core, drivers can only
  handle driver-specific properties.
- Atomic props&ioctl are opt-in per file_priv, userspace needs to
  explicitly ask for it (like universal plane support).
- For now all hidden behind the atomic module option until this has
  settled a bit.
- Atomic modesets are currently not possible since the exact abi for how
  to handle the mode property is still under discussion.

Besides this some cleanup patches from me and the addition of per-object
state to global state backpointers to simplify drivers.

* tag 'topic/atomic-core-2015-01-05' of git://anongit.freedesktop.org/drm-intel:
  drm: Ensure universal_planes is set for atomic
  drm/atomic: Hide drm.ko internal interfaces
  drm: Atomic modeset ioctl
  drm/atomic: atomic connector properties
  drm/atomic: atomic plane properties
  drm: small property creation cleanup
  drm/atomic: atomic_check functions
  drm: add atomic properties
  drm: refactor getproperties/getconnector
  drm: tweak getconnector locking
  drm: add atomic_get_property
  drm: add atomic_set_property wrappers
  drm: get rid of direct property value access
  drm: store property instead of id in obj attachment
  drm: allow property validation for refcnted props
  drm/atomic: Introduce state->obj backpointers
  drm/atomic-helper: Again check modeset *before* plane states
  drm/atomic-helper: Export both plane and modeset check helpers

Misc drm patches with mostly polish patches from Thierry, with a bit of
generic mode validation from Ville and a few other oddball things.

* tag 'topic/core-stuff-2014-12-19' of git://anongit.freedesktop.org/drm-intel: (25 commits)
  drm: Include drm_crtc_helper.h in DocBook
  drm: Make drm_crtc_helper.h standalone includible
  drm: Move IRQ related fields to proper section
  drm: Remove stale comment
  drm: Do basic sanity checks for user modes
  drm: Perform basic sanity checks on probed modes
  drm: Reorganize probed mode validation
  drm/doc: Remove duplicate "by"
  drm/info: Remove unused code
  drm/cache: Use wbinvd helpers
  drm/plane-helper: Test for plane disable earlier
  drm/doc: Document drm_add_modes_noedid() usage
  drm: bit of spell-check / editorializing.
  drm: Prefer sizeof(type) over sizeof type
  drm: Remove useless else block
  drm: Remove unneeded braces for single statement blocks
  drm: Do not assign in if condition
  drm: Prefer kmalloc_array() over kmalloc() with multiply
  drm: Prefer kcalloc() over kzalloc() with multiply
  drm: Miscellaneous checkpatch whitespace cleanups
  ...

We do not need to track the state of the IPU DI's clock flags by having
each display bridge calling back into imx-drm-core, and then back out
into ipuv3-crtc.c.

ipuv3-crtc can instead just scan the list of encoders to retrieve their
type, and build up a picture of which types of encoders are attached.
We can then use this information to configure the IPU DI clocking mode
without any uncertainty - if we have multiple bridges connected to the
same DI, if one of them requires a synchronous DI clock, that's what we
must use.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>

We can use the DIV_ROUND_CLOSEST() macro when calculating the DI
clock divider, rounded to nearest int.
Suggested-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>

This patch changes struct ipu_di_signal_cfg to use struct videomode
to define video timings and flags.
Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>

The encoder ->prepare() and ->mode_set() methods need to use the
hw adjusted mode, not the original mode.
Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>

Ask the IPU display interface, via ipu_di_adjust_videomode(), to
adjust a video mode to meet any DI restrictions. The function takes
a subsystem independent videomode, so the drm_display_mode must be
converted to videomode first, and then the adjusted mode converted
back to a drm_display_mode.
Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>

Add conversion from drm_display_mode to videomode.
Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>

h_total and v_total were calculated in ipu_di_init_sync_panel()
but never actually used. Remove.
Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>

On some monitors, high resolution modes are not working, exhibiting
pixel column truncation problems (for example, 1280x1024 displays as
1280x1022).

The function ipu_di_adjust_videomode() aims to fix these issues by
adjusting a passed videomode to IPU restrictions. The function can
be called from the drm_crtc_helper_funcs->mode_fixup() methods.
Signed-off-by: Jiada Wang <jiada_wang@mentor.com>
Signed-off-by: Deepak Das <deepak_das@mentor.com>
Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>

To build the rockchip dw_hdmi driver as a module, the
rockchip_drm_encoder_get_mux_id and rockchip_drm_crtc_mode_config
functions need to be exported.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>

Otherwise a spurious interrupt might trigger (and crash) the interrupt handler
before probing finished.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>