- 31 Jul, 2017 2 commits
-
-
Jacopo Mondi authored
Add pin configuration subnode for SCIF2 serial debug interface. Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
-
Jacopo Mondi authored
Add pin controller node with 12 gpio controller sub-nodes to r7s72100 dtsi. Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
-
- 27 Jul, 2017 28 commits
-
-
Chris Paterson authored
Define the iwg20m board dependent part of the MMCIF0 device node. Signed-off-by: Chris Paterson <chris.paterson2@renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
-
Simon Horman authored
Use R-Car Gen 2 fallback binding for vind nodes in DT for r8a7794 SoC. This has no run-time effect for the current driver as the initialisation sequence is the same for the SoC-specific binding for r8a7794 and the fallback binding for R-Car Gen 2 Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
-
Simon Horman authored
Use R-Car Gen 2 fallback binding for vind nodes in DT for r8a7791 SoC. This has no run-time effect for the current driver as the initialisation sequence is the same for the SoC-specific binding for r8a7791 and the fallback binding for R-Car Gen 2 Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
-
Simon Horman authored
Use R-Car Gen 2 fallback binding for vind nodes in DT for r8a7790 SoC. This has no run-time effect for the current driver as the initialisation sequence is the same for the SoC-specific binding for r8a7790 and the fallback binding for R-Car Gen 2 Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
-
Chris Paterson authored
Add the MMCIF0 device to the r8a7743 device tree. Signed-off-by: Chris Paterson <chris.paterson2@renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
-
Geert Uytterhoeven authored
Reserve SRAM for the jump stub for CPU core bringup. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
-
Geert Uytterhoeven authored
Reserve SRAM for the jump stub for CPU core bringup. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
-
Geert Uytterhoeven authored
Reserve SRAM for the jump stub for CPU core bringup. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
-
Geert Uytterhoeven authored
Reserve SRAM for the jump stub for CPU core bringup. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
-
Geert Uytterhoeven authored
Reserve SRAM for the jump stub for CPU core bringup. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
-
Geert Uytterhoeven authored
Reserve SRAM for the jump stub for CPU core bringup. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
-
Geert Uytterhoeven authored
Reserve SRAM for the jump stub for CPU core bringup. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
-
Geert Uytterhoeven authored
R-Car E2 has 2 regions of Inter Connect RAM (72 + 4 KiB). Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
-
Geert Uytterhoeven authored
R-Car M2-N has 2 regions of Inter Connect RAM (72 + 4 KiB). Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
-
Geert Uytterhoeven authored
R-Car V2H has 2 regions of Inter Connect RAM (72 + 4 KiB). Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
-
Geert Uytterhoeven authored
R-Car M2-W has 2 regions of Inter Connect RAM (72 + 4 KiB). Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
-
Geert Uytterhoeven authored
R-Car H2 has 2 regions of Inter Connect RAM (72 + 4 KiB). Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
-
Geert Uytterhoeven authored
RZ/G1E has 3 regions of Inter Connect RAM (72 + 4 + 256 KiB). Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
-
Geert Uytterhoeven authored
RZ/G1M has 3 regions of Inter Connect RAM (72 + 4 + 256 KiB). Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
-
Biju Das authored
Define the iWave RainboW-G20D-Qseven board dependent part of the Ethernet AVB device node. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Chris Paterson <chris.paterson2@renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
-
Biju Das authored
Add Ethernet AVB support for r8a7743 SoC. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Chris Paterson <chris.paterson2@renesas.com> Reviewed-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
-
Biju Das authored
Adding pinctrl support for scif0 interface. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
-
Biju Das authored
Describe GPIO blocks in the R8A7743 device tree. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Chris Paterson <chris.paterson2@renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
-
Sergei Shtylyov authored
Add the (previously omitted) Ether/PHY pin data to the SK-RZG1M board's device tree. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
-
Sergei Shtylyov authored
Add the (previously omitted) SCIF0 pin data to the SK-RZG1M board's device tree. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
-
Sergei Shtylyov authored
Define the generic R8A7743 part of the PFC device node. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
-
Javier Martinez Canillas authored
The at24 driver allows to register I2C EEPROM chips using different vendor and devices, but the I2C subsystem does not take the vendor into account when matching using the I2C table since it only has device entries. But when matching using an OF table, both the vendor and device has to be taken into account so the driver defines only a set of compatible strings using the "atmel" vendor as a generic fallback for compatible I2C devices. So add this generic fallback to the device node compatible string to make the device to match the driver using the OF device ID table. Signed-off-by: Javier Martinez Canillas <javier@dowhile0.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
-
Javier Martinez Canillas authored
The at24 driver allows to register I2C EEPROM chips using different vendor and devices, but the I2C subsystem does not take the vendor into account when matching using the I2C table since it only has device entries. But when matching using an OF table, both the vendor and device has to be taken into account so the driver defines only a set of compatible strings using the "atmel" vendor as a generic fallback for compatible I2C devices. So add this generic fallback to the device node compatible string to make the device to match the driver using the OF device ID table. Signed-off-by: Javier Martinez Canillas <javier@dowhile0.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
-
- 15 Jul, 2017 10 commits
-
-
Linus Torvalds authored
-
git://git.lwn.net/linuxLinus Torvalds authored
Pull documentation format standardization from Jonathan Corbet: "This series converts a number of top-level documents to the RST format without incorporating them into the Sphinx tree. The hope is to bring some uniformity to kernel documentation and, perhaps more importantly, have our existing docs serve as an example of the desired formatting for those that will be added later. Mauro has gone through and fixed up a lot of top-level documentation files to make them conform to the RST format, but without moving or renaming them in any way. This will help when we incorporate the ones we want to keep into the Sphinx doctree, but the real purpose is to bring a bit of uniformity to our documentation and let the top-level docs serve as examples for those writing new ones" * tag 'standardize-docs' of git://git.lwn.net/linux: (84 commits) docs: kprobes.txt: Fix whitespacing tee.txt: standardize document format cgroup-v2.txt: standardize document format dell_rbu.txt: standardize document format zorro.txt: standardize document format xz.txt: standardize document format xillybus.txt: standardize document format vfio.txt: standardize document format vfio-mediated-device.txt: standardize document format unaligned-memory-access.txt: standardize document format this_cpu_ops.txt: standardize document format svga.txt: standardize document format static-keys.txt: standardize document format smsc_ece1099.txt: standardize document format SM501.txt: standardize document format siphash.txt: standardize document format sgi-ioc4.txt: standardize document format SAK.txt: standardize document format rpmsg.txt: standardize document format robust-futexes.txt: standardize document format ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/randomLinus Torvalds authored
Pull random updates from Ted Ts'o: "Add wait_for_random_bytes() and get_random_*_wait() functions so that callers can more safely get random bytes if they can block until the CRNG is initialized. Also print a warning if get_random_*() is called before the CRNG is initialized. By default, only one single-line warning will be printed per boot. If CONFIG_WARN_ALL_UNSEEDED_RANDOM is defined, then a warning will be printed for each function which tries to get random bytes before the CRNG is initialized. This can get spammy for certain architecture types, so it is not enabled by default" * tag 'random_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/random: random: reorder READ_ONCE() in get_random_uXX random: suppress spammy warnings about unseeded randomness random: warn when kernel uses unseeded randomness net/route: use get_random_int for random counter net/neighbor: use get_random_u32 for 32-bit hash random rhashtable: use get_random_u32 for hash_rnd ceph: ensure RNG is seeded before using iscsi: ensure RNG is seeded before use cifs: use get_random_u32 for 32-bit lock random random: add get_random_{bytes,u32,u64,int,long,once}_wait family random: add wait_for_random_bytes() API
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull ->s_options removal from Al Viro: "Preparations for fsmount/fsopen stuff (coming next cycle). Everything gets moved to explicit ->show_options(), killing ->s_options off + some cosmetic bits around fs/namespace.c and friends. Basically, the stuff needed to work with fsmount series with minimum of conflicts with other work. It's not strictly required for this merge window, but it would reduce the PITA during the coming cycle, so it would be nice to have those bits and pieces out of the way" * 'work.mount' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: isofs: Fix isofs_show_options() VFS: Kill off s_options and helpers orangefs: Implement show_options 9p: Implement show_options isofs: Implement show_options afs: Implement show_options affs: Implement show_options befs: Implement show_options spufs: Implement show_options bpf: Implement show_options ramfs: Implement show_options pstore: Implement show_options omfs: Implement show_options hugetlbfs: Implement show_options VFS: Don't use save/replace_mount_options if not using generic_show_options VFS: Provide empty name qstr VFS: Make get_filesystem() return the affected filesystem VFS: Clean up whitespace in fs/namespace.c and fs/super.c Provide a function to create a NUL-terminated string from unterminated data
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull more __copy_.._user elimination from Al Viro. * 'work.__copy_to_user' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: drm_dp_aux_dev: switch to read_iter/write_iter
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull uacess-unaligned removal from Al Viro: "That stuff had just one user, and an exotic one, at that - binfmt_flat on arm and m68k" * 'work.uaccess-unaligned' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: kill {__,}{get,put}_user_unaligned() binfmt_flat: flat_{get,put}_addr_from_rp() should be able to fail
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull network field-by-field copy-in updates from Al Viro: "This part of the misc compat queue was held back for review from networking folks and since davem has jus ACKed those..." * 'misc.compat' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: get_compat_bpf_fprog(): don't copyin field-by-field get_compat_msghdr(): get rid of field-by-field copyin copy_msghdr_from_user(): get rid of field-by-field copyin
-
git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds authored
Pull MIPS updates from Ralf Baechle: "Boston platform support: - Document DT bindings - Add CLK driver for board clocks CM: - Avoid per-core locking with CM3 & higher - WARN on attempt to lock invalid VP, not BUG CPS: - Select CONFIG_SYS_SUPPORTS_SCHED_SMT for MIPSr6 - Prevent multi-core with dcache aliasing - Handle cores not powering down more gracefully - Handle spurious VP starts more gracefully DSP: - Add lwx & lhx missaligned access support eBPF: - Add MIPS support along with many supporting change to add the required infrastructure Generic arch code: - Misc sysmips MIPS_ATOMIC_SET fixes - Drop duplicate HAVE_SYSCALL_TRACEPOINTS - Negate error syscall return in trace - Correct forced syscall errors - Traced negative syscalls should return -ENOSYS - Allow samples/bpf/tracex5 to access syscall arguments for sane traces - Cleanup from old Kconfig options in defconfigs - Fix PREF instruction usage by memcpy for MIPS R6 - Fix various special cases in the FPU eulation - Fix some special cases in MIPS16e2 support - Fix MIPS I ISA /proc/cpuinfo reporting - Sort MIPS Kconfig alphabetically - Fix minimum alignment requirement of IRQ stack as required by ABI / GCC - Fix special cases in the module loader - Perform post-DMA cache flushes on systems with MAARs - Probe the I6500 CPU - Cleanup cmpxchg and add support for 1 and 2 byte operations - Use queued read/write locks (qrwlock) - Use queued spinlocks (qspinlock) - Add CPU shared FTLB feature detection - Handle tlbex-tlbp race condition - Allow storing pgd in C0_CONTEXT for MIPSr6 - Use current_cpu_type() in m4kc_tlbp_war() - Support Boston in the generic kernel Generic platform: - yamon-dt: Pull YAMON DT shim code out of SEAD-3 board - yamon-dt: Support > 256MB of RAM - yamon-dt: Use serial* rather than uart* aliases - Abstract FDT fixup application - Set RTC_ALWAYS_BCD to 0 - Add a MAINTAINERS entry core kernel: - qspinlock.c: include linux/prefetch.h Loongson 3: - Add support Perf: - Add I6500 support SEAD-3: - Remove GIC timer from DT - Set interrupt-parent per-device, not at root node - Fix GIC interrupt specifiers SMP: - Skip IPI setup if we only have a single CPU VDSO: - Make comment match reality - Improvements to time code in VDSO" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (86 commits) locking/qspinlock: Include linux/prefetch.h MIPS: Fix MIPS I ISA /proc/cpuinfo reporting MIPS: Fix minimum alignment requirement of IRQ stack MIPS: generic: Support MIPS Boston development boards MIPS: DTS: img: Don't attempt to build-in all .dtb files clk: boston: Add a driver for MIPS Boston board clocks dt-bindings: Document img,boston-clock binding MIPS: Traced negative syscalls should return -ENOSYS MIPS: Correct forced syscall errors MIPS: Negate error syscall return in trace MIPS: Drop duplicate HAVE_SYSCALL_TRACEPOINTS select MIPS16e2: Provide feature overrides for non-MIPS16 systems MIPS: MIPS16e2: Report ASE presence in /proc/cpuinfo MIPS: MIPS16e2: Subdecode extended LWSP/SWSP instructions MIPS: MIPS16e2: Identify ASE presence MIPS: VDSO: Fix a mismatch between comment and preprocessor constant MIPS: VDSO: Add implementation of gettimeofday() fallback MIPS: VDSO: Add implementation of clock_gettime() fallback MIPS: VDSO: Fix conversions in do_monotonic()/do_monotonic_coarse() MIPS: Use current_cpu_type() in m4kc_tlbp_war() ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/rw/umlLinus Torvalds authored
Pull UML updates from Richard Weinberger: "Mostly fixes for UML: - First round of fixes for PTRACE_GETRESET/SETREGSET - A printf vs printk cleanup - Minor improvements" * 'for-linus-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml: um: Correctly check for PTRACE_GETRESET/SETREGSET um: v2: Use generic NOTES macro um: Add kerneldoc for userspace_tramp() and start_userspace() um: Add kerneldoc for segv_handler um: stub-data.h: remove superfluous include um: userspace - be more verbose in ptrace set regs error um: add dummy ioremap and iounmap functions um: Allow building and running on older hosts um: Avoid longjmp/setjmp symbol clashes with libpthread.a um: console: Ignore console= option um: Use os_warn to print out pre-boot warning/error messages um: Add os_warn() for pre-boot warning/error messages um: Use os_info for the messages on normal path um: Add os_info() for pre-boot information messages um: Use printk instead of printf in make_uml_dir
-
git://git.infradead.org/linux-ubifsLinus Torvalds authored
Pull UBIFS updates from Richard Weinberger: - Updates and fixes for the file encryption mode - Minor improvements - Random fixes * tag 'upstream-4.13-rc1' of git://git.infradead.org/linux-ubifs: ubifs: Set double hash cookie also for RENAME_EXCHANGE ubifs: Massage assert in ubifs_xattr_set() wrt. init_xattrs ubifs: Don't leak kernel memory to the MTD ubifs: Change gfp flags in page allocation for bulk read ubifs: Fix oops when remounting with no_bulk_read. ubifs: Fail commit if TNC is obviously inconsistent ubifs: allow userspace to map mounts to volumes ubifs: Wire-up statx() support ubifs: Remove dead code from ubifs_get_link() ubifs: Massage debug prints wrt. fscrypt ubifs: Add assert to dent_key_init() ubifs: Fix unlink code wrt. double hash lookups ubifs: Fix data node size for truncating uncompressed nodes ubifs: Don't encrypt special files on creation ubifs: Fix memory leak in RENAME_WHITEOUT error path in do_rename ubifs: Fix inode data budget in ubifs_mknod ubifs: Correctly evict xattr inodes ubifs: Unexport ubifs_inode_slab ubifs: don't bother checking for encryption key in ->mmap() ubifs: require key for truncate(2) of encrypted file
-