- 09 Feb, 2016 30 commits
-
-
Geert Uytterhoeven authored
Add and enable the external crystal for the SCIF_CLK and its pinctrl, to be used by the Baud Rate Generator for External Clock (BRG) on (H)SCIF. This increases the range and accuracy of supported baud rates. Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by:
Simon Horman <horms+renesas@verge.net.au>
-
Geert Uytterhoeven authored
Add and enable the external crystal for the SCIF_CLK and its pinctrl, to be used by the Baud Rate Generator for External Clock (BRG) on (H)SCIF. This increases the range and accuracy of supported baud rates: - SCIF: - Supports now 50, 75, 110, 1152000, 1500000, 2000000, and 4000000 bps, - Perfect match for standard 50-460800, and 9216000 bps. - More accurate 576000 bps. - HSCIF: - Supports now 50, 75, 110, 134, 150, and 200 bps, - Perfect match for standard 50-460800, and 9216000 bps. - More accurate 576000, 1152000, 3000000, 3500000, and 4000000 bps. Signed-off-by:Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by:
-
Geert Uytterhoeven authored
Add and enable the external crystal for the SCIF_CLK and its pinctrl, to be used by the Baud Rate Generator for External Clock (BRG) on (H)SCIF. This increases the range and accuracy of supported baud rates. Signed-off-by:
-
Geert Uytterhoeven authored
Add and enable the external crystal for the SCIF_CLK and its pinctrl, to be used by the Baud Rate Generator for External Clock (BRG) on (H)SCIF. This increases the range and accuracy of supported baud rates. Signed-off-by:
-
Geert Uytterhoeven authored
Add and enable the external crystal for the SCIF_CLK and its pinctrl, to be used by the Baud Rate Generator for External Clock (BRG) on (H)SCIF. This increases the range and accuracy of supported baud rates. Signed-off-by:
-
Geert Uytterhoeven authored
Add the device node for the external SCIF_CLK. The presence of the SCIF_CLK crystal and its clock frequency depends on the actual board. Add the two optional clock sources (ZS_CLK and SCIF_CLK for the internal resp. external clock) for the Baud Rate Generator for External Clock (BRG) to all SCIF and HSCIF device nodes. This increases the range and accuracy of supported baud rates on (H)SCIF. Signed-off-by:
-
Geert Uytterhoeven authored
Add the device node for the external SCIF_CLK. The presence of the SCIF_CLK crystal and its clock frequency depends on the actual board. Add the two optional clock sources (ZS_CLK and SCIF_CLK for the internal resp. external clock) for the Baud Rate Generator for External Clock (BRG) to all SCIF and HSCIF device nodes. This increases the range and accuracy of supported baud rates on (H)SCIF. Signed-off-by:
-
Geert Uytterhoeven authored
Add the device node for the external SCIF_CLK. The presence of the SCIF_CLK crystal and its clock frequency depends on the actual board. Add the two optional clock sources (ZS_CLK and SCIF_CLK for the internal resp. external clock) for the Baud Rate Generator for External Clock (BRG) to all SCIF and HSCIF device nodes. This increases the range and accuracy of supported baud rates on (H)SCIF. Signed-off-by:
-
Geert Uytterhoeven authored
Add the device node for the external SCIF_CLK. The presence of the SCIF_CLK crystal and its clock frequency depends on the actual board. Add the two optional clock sources (ZS_CLK and SCIF_CLK for the internal resp. external clock) for the Baud Rate Generator for External Clock (BRG) to all SCIF and HSCIF device nodes. This increases the range and accuracy of supported baud rates on (H)SCIF. Signed-off-by:
-
Geert Uytterhoeven authored
Add the device node for the external SCIF_CLK. The presence of the SCIF_CLK crystal and its clock frequency depends on the actual board. Add the two optional clock sources (S1 and SCIF_CLK for the internal resp. external clock) for the Baud Rate Generator for External Clock (BRG) to all SCIF device nodes. This increases the range and accuracy of supported baud rates on SCIF. Signed-off-by:
-
Geert Uytterhoeven authored
Add the device node for the external SCIF_CLK. The presence of the SCIF_CLK crystal and its clock frequency depends on the actual board. Add the two optional clock sources (S1 and SCIF_CLK for the internal resp. external clock) for the Baud Rate Generator for External Clock (BRG) to all SCIF device nodes. This increases the range and accuracy of supported baud rates on SCIF. Signed-off-by:
-
Laurent Pinchart authored
The clock is really the device functional clock, not the interface clock. Rename it. Signed-off-by:
-
Laurent Pinchart authored
The clock is really the device functional clock, not the interface clock. Rename it. Signed-off-by:
-
Laurent Pinchart authored
The clock is really the device functional clock, not the interface clock. Rename it. Signed-off-by:
-
Laurent Pinchart authored
The clock is really the device functional clock, not the interface clock. Rename it. Signed-off-by:
-
Laurent Pinchart authored
The clock is really the device functional clock, not the interface clock. Rename it. Signed-off-by:
-
Laurent Pinchart authored
The clock is really the device functional clock, not the interface clock. Rename it. Signed-off-by:
-
Laurent Pinchart authored
The clock is really the device functional clock, not the interface clock. Rename it. Signed-off-by:
-
Laurent Pinchart authored
The clock is really the device functional clock, not the interface clock. Rename it. Signed-off-by:
-
Laurent Pinchart authored
The clock is really the device functional clock, not the interface clock. Rename it. Signed-off-by:
-
Laurent Pinchart authored
The clock is really the device functional clock, not the interface clock. Rename it. Signed-off-by:
-
Geert Uytterhoeven authored
Signed-off-by:
-
Geert Uytterhoeven authored
Signed-off-by:
-
Geert Uytterhoeven authored
Signed-off-by:
-
Geert Uytterhoeven authored
Signed-off-by:
-
Geert Uytterhoeven authored
Signed-off-by:
-
Geert Uytterhoeven authored
Signed-off-by:
-
Simon Horman authored
Use GIC_* defines for GIC interrupt cells in emev2 device tree. Signed-off-by:
-
Simon Horman authored
Use GIC_* defines for GIC interrupt cells in sh73a0 device tree. Signed-off-by:
-
Simon Horman authored
Use GIC_* defines for GIC interrupt cells in r7s72100 device tree. Signed-off-by:
-
- 29 Jan, 2016 10 commits
-
-
Simon Horman authored
Enable audio DMAC (= rcar-dmac) in r8a7793 device tree. Based on similar work for the r8a7791 by Kuninori Morimoto. Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by:
-
Simon Horman authored
Enable DMA transfer using DVC in r8a7793/gose device tree. DMA DMApp [MEM] -> [SRC] -> [DVC] -> [SSIU] -> [SSI] DMA DMApp [MEM] <- [DVC] <- [SRC] <- [SSIU] <- [SSI] Based on similar work for the r8a7791/koelsch by Kuninori Morimoto. Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: -
Simon Horman authored
Enable DMA transfer to/from SRC in r8a7793/gose device tree. DMA DMApp [MEM] -> [SRC] -> [SSIU] -> [SSI] DMA DMApp [MEM] <- [SRC] <- [SSIU] <- [SSI] Current sound driver is supporting SSI/SRC random connection. So, this patch is tring SSI0 -> SRC2 SSI1 <- SRC3 Based on similar work for the r8a7791/koeslch by Kuninori Morimoto. Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: -
Simon Horman authored
Enable DMA transfer to/from SSIU in gose/r8a7791 device tree. DMA [MEM] -> [SSIU] -> [SSI] DMA [MEM] <- [SSIU] <- [SSI] Based on similar work for the r8a7791/koelsch by Kuninori Morimoto. Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: -
Simon Horman authored
Enable DMA transfer to/from SSI in r8a7793/gose device tree. DMA [MEM] -> [SSI] DMA [MEM] <- [SSI] Based on similar work for the r8a7791/koelsch by Kuninori Morimoto. Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: -
Simon Horman authored
Enable sound PIO support in the r8a7793/gose device tree. Based on similar work for the r8a7791/koelsch by Kuninori Morimoto. Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by:
-
Simon Horman authored
Audio DMAC peri peri is no longer DMAEngine. it is supported by sound driver. this patch enable it. Base on work for the r8a7791 by Kuninori Morimoto. Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by:
-
Simon Horman authored
Instantiate the two Audio DMA controllers in the r8a7791 device tree. Based on similar work for the r8a7791 by Kuninori Morimoto. Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by:
-
Simon Horman authored
Instantiate Audio DMA clocks in the r8a7791 device tree. Based on similar work for the r8a7791 by Kuninori Morimoto. Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by:
-
Simon Horman authored
Add DVC support to sound node in r8a7793 device tree. Based on similar work for the r8a7791 by Kuninori Morimoto. Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by:
-
