- 21 Mar, 2006 40 commits
-
-
Stephen Hemminger authored
Cleanup the get/set of bridge timer value in the packets. It is clearer not to bury the conversion in macro. Signed-off-by:
Stephen Hemminger <shemminger@osdl.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Stephen Hemminger authored
Optimize the forwarding and transmit paths. Both places are called with bottom half/no preempt so there is no need to use spin_lock_bh or rcu_read_lock. Signed-off-by:
-
Stephen Hemminger authored
Move nf_bridge_alloc from header file to the one place it is used and optimize it. Signed-off-by:
-
Stephen Hemminger authored
Fix the VLAN macros in bridge netfilter code. Macros should not depend on magic variables. Signed-off-by:
-
Stephen Hemminger authored
Only use__constant_htons() for initializers and switch cases. For other uses, it is just as efficient and clearer to use htons Signed-off-by:
-
Stephen Hemminger authored
Run br_netfilter through Lindent to fix whitespace. Signed-off-by:
-
Stephen Hemminger authored
The netfilter hook that is used to receive frames doesn't need to be a stub. It is only called in two ways, both of which ignore the return value. Signed-off-by:
-
Stephen Hemminger authored
Use kzalloc versus kmalloc+memset. Also don't need to do memset() of bridge address since it is in netdev private data that is already zero'd in alloc_netdev. Signed-off-by:
-
Stephen Hemminger authored
Use kcalloc rather than kmalloc + memset. Signed-off-by:
-
Stephen Hemminger authored
Use the now standard setup_timer function. Signed-off-by:
-
Stephen Hemminger authored
The STP timers run off softirq (kernel timers), so there is no need to disable bottom half in the spin locks. Signed-off-by:
-
Andrew Morton authored
net/bridge/br_netfilter.c: In function `br_nf_pre_routing': net/bridge/br_netfilter.c:427: warning: unused variable `vhdr' net/bridge/br_netfilter.c:445: warning: unused variable `vhdr' Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
-
Andrew Morton authored
net/bridge/netfilter/ebtables.c:1481: warning: initialization makes pointer from integer without a cast Signed-off-by:
-
David S. Miller authored
Sparc64 and Sparc32 have to have identical socket call numbering in order to handle compat layer stuff properly. Signed-off-by: -
David S. Miller authored
"struct inet_csk" --> "struct inet_connection_sock" :-) Signed-off-by: -
Arnaldo Carvalho de Melo authored
This is in preparation for having a dccp_minisock embedded into dccp_request_sock so that feature negotiation can be done prior to creating the full blown dccp_sock. Signed-off-by:
Arnaldo Carvalho de Melo <acme@mandriva.com> Signed-off-by:
-
Arnaldo Carvalho de Melo authored
This will later be included in struct dccp_request_sock so that we can have per connection feature negotiation state while in the 3way handshake, when we clone the DCCP_ROLE_LISTEN socket (in dccp_create_openreq_child) we'll just copy this state from dreq_minisock to dccps_minisock. Also the feature negotiation and option parsing code will mostly touch dccps_minisock, which will simplify some stuff. Signed-off-by:
-
Catherine Zhang authored
Signed-off-by:
Catherine Zhang <cxzhang@watson.ibm.com> Signed-off-by:
-
Arnaldo Carvalho de Melo authored
No code changes, just tidying up, in some cases moving EXPORT_SYMBOLs to just after the function exported, etc. Signed-off-by:
-
Arnaldo Carvalho de Melo authored
*** Warning: "skb_pull_rcsum" [net/bridge/bridge.ko] undefined! *** Warning: "skb_pull_rcsum" [net/8021q/8021q.ko] undefined! *** Warning: "skb_pull_rcsum" [drivers/net/pppoe.ko] undefined! *** Warning: "skb_pull_rcsum" [drivers/net/ppp_generic.ko] undefined! Signed-off-by:
-
Arnaldo Carvalho de Melo authored
A recent changeset removes dummy_socket_getpeersec, replacing it with two new functions, but still references the removed function in the security_fixup_ops table, fix it by doing the replacement operation in the fixup table too. Signed-off-by:
-
Arnaldo Carvalho de Melo authored
Signed-off-by:
-
Arnaldo Carvalho de Melo authored
Signed-off-by:
-
Arnaldo Carvalho de Melo authored
Signed-off-by:
-
Dmitry Mishin authored
This patch extends {get|set}sockopt compatibility layer in order to move protocol specific parts to their place and avoid huge universal net/compat.c file in the future. Signed-off-by:Dmitry Mishin <dim@openvz.org> Signed-off-by:
-
Dave Jones authored
We've already dereferenced 'np' a dozen times at this point, so it's safe to say it's not null. Signed-off-by:
Dave Jones <davej@redhat.com> Signed-off-by:
-
Adrian Bunk authored
This option should IMHO no longer depend on EXPERIMENTAL. Signed-off-by:
Adrian Bunk <bunk@stusta.de> ACKed-by:
Jamal Hadi Salim <hadi@cyberus.ca> Signed-off-by:
-
Herbert Xu authored
We're now starting to have quite a number of places that do skb_pull followed immediately by an skb_postpull_rcsum. We can merge these two operations into one function with skb_pull_rcsum. This makes sense since most pull operations on receive skb's need to update the checksum. I've decided to make this out-of-line since it is fairly big and the fast path where hardware checksums are enabled need to call csum_partial anyway. Since this is a brand new function we get to add an extra check on the len argument. As it is most callers of skb_pull ignore its return value which essentially means that there is no check on the len argument. Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Steven Whitehouse authored
As per Robert Olsson's patch for ipv4, this is the DECnet version to keep the code "in step". It changes the list of rules to use RCU rather than an rwlock. Inspired-by:
Robert Olsson <robert.olsson@its.uu.se> Signed-off-by:
Steven Whitehouse <steve@chygwyn.com> Signed-off-by:
Patrick Caulfield <patrick@tykepenguin.com> Signed-off-by:
-
Patrick Caulfield authored
This patch means that 64bit kernel/32bit userland platforms will now work correctly with DECnet. Signed-off-by:
-
Steven Whitehouse authored
The typedef for dn_address has been removed in favour of using __le16 or __u16 directly as appropriate. All the DECnet header files are updated accordingly. The byte ordering of dn_eth2dn() and dn_dn2eth() are both changed since just about all their callers wanted network order rather than host order, so the conversion is now done in the functions themselves. Several missed endianess conversions have been picked up during the conversion process. The nh_gw field in struct dn_fib_info has been changed from a 32 bit field to 16 bits as it ought to be. One or two cases of using htons rather than dn_htons in the routing code have been found and fixed. There are still a few warnings to fix, but this patch deals with the important cases. Signed-off-by:
-
Catherine Zhang authored
This patch implements an application of the LSM-IPSec networking controls whereby an application can determine the label of the security association its TCP or UDP sockets are currently connected to via getsockopt and the auxiliary data mechanism of recvmsg. Patch purpose: This patch enables a security-aware application to retrieve the security context of an IPSec security association a particular TCP or UDP socket is using. The application can then use this security context to determine the security context for processing on behalf of the peer at the other end of this connection. In the case of UDP, the security context is for each individual packet. An example application is the inetd daemon, which could be modified to start daemons running at security contexts dependent on the remote client. Patch design approach: - Design for TCP The patch enables the SELinux LSM to set the peer security context for a socket based on the security context of the IPSec security association. The application may retrieve this context using getsockopt. When called, the kernel determines if the socket is a connected (TCP_ESTABLISHED) TCP socket and, if so, uses the dst_entry cache on the socket to retrieve the security associations. If a security association has a security context, the context string is returned, as for UNIX domain sockets. - Design for UDP Unlike TCP, UDP is connectionless. This requires a somewhat different API to retrieve the peer security context. With TCP, the peer security context stays the same throughout the connection, thus it can be retrieved at any time between when the connection is established and when it is torn down. With UDP, each read/write can have different peer and thus the security context might change every time. As a result the security context retrieval must be done TOGETHER with the packet retrieval. The solution is to build upon the existing Unix domain socket API for retrieving user credentials. Linux offers the API for obtaining user credentials via ancillary messages (i.e., out of band/control messages that are bundled together with a normal message). Patch implementation details: - Implementation for TCP The security context can be retrieved by applications using getsockopt with the existing SO_PEERSEC flag. As an example (ignoring error checking): getsockopt(sockfd, SOL_SOCKET, SO_PEERSEC, optbuf, &optlen); printf("Socket peer context is: %s\n", optbuf); The SELinux function, selinux_socket_getpeersec, is extended to check for labeled security associations for connected (TCP_ESTABLISHED == sk->sk_state) TCP sockets only. If so, the socket has a dst_cache of struct dst_entry values that may refer to security associations. If these have security associations with security contexts, the security context is returned. getsockopt returns a buffer that contains a security context string or the buffer is unmodified. - Implementation for UDP To retrieve the security context, the application first indicates to the kernel such desire by setting the IP_PASSSEC option via getsockopt. Then the application retrieves the security context using the auxiliary data mechanism. An example server application for UDP should look like this: toggle = 1; toggle_len = sizeof(toggle); setsockopt(sockfd, SOL_IP, IP_PASSSEC, &toggle, &toggle_len); recvmsg(sockfd, &msg_hdr, 0); if (msg_hdr.msg_controllen > sizeof(struct cmsghdr)) { cmsg_hdr = CMSG_FIRSTHDR(&msg_hdr); if (cmsg_hdr->cmsg_len <= CMSG_LEN(sizeof(scontext)) && cmsg_hdr->cmsg_level == SOL_IP && cmsg_hdr->cmsg_type == SCM_SECURITY) { memcpy(&scontext, CMSG_DATA(cmsg_hdr), sizeof(scontext)); } } ip_setsockopt is enhanced with a new socket option IP_PASSSEC to allow a server socket to receive security context of the peer. A new ancillary message type SCM_SECURITY. When the packet is received we get the security context from the sec_path pointer which is contained in the sk_buff, and copy it to the ancillary message space. An additional LSM hook, selinux_socket_getpeersec_udp, is defined to retrieve the security context from the SELinux space. The existing function, selinux_socket_getpeersec does not suit our purpose, because the security context is copied directly to user space, rather than to kernel space. Testing: We have tested the patch by setting up TCP and UDP connections between applications on two machines using the IPSec policies that result in labeled security associations being built. For TCP, we can then extract the peer security context using getsockopt on either end. For UDP, the receiving end can retrieve the security context using the auxiliary data mechanism of recvmsg. Signed-off-by:James Morris <jmorris@namei.org> Acked-by:
-
Patrick McHardy authored
When xfrm_user isn't loaded xfrm_nl is NULL, which makes IPsec crash because xfrm_aevent_is_on passes the NULL pointer to netlink_has_listeners as socket. A second problem is that the xfrm_nl pointer is not cleared when the socket is releases at module unload time. Protect references of xfrm_nl from outside of xfrm_user by RCU, check that the socket is present in xfrm_aevent_is_on and set it to NULL when unloading xfrm_user. Signed-off-by:
Patrick McHardy <kaber@trash.net> Signed-off-by:
-
Rick Jones authored
Back in the dark ages, we had to be conservative and only allow 15-bit window fields if the window scale option was not negotiated. Some ancient stacks used a signed 16-bit quantity for the window field of the TCP header and would get confused. Those days are long gone, so we can use the full 16-bits by default now. There is a sysctl added so that we can still interact with such old stacks Signed-off-by:
Rick Jones <rick.jones2@hp.com> Signed-off-by:
-
Neil Horman authored
As John pointed out, I had not added documentation to describe the arp_accpet sysctl that I posted in my last patch. This patch adds that documentation. Signed-off-by:
Neil Horman <nhorman@tuxdriver.com> Signed-off-by:
-
Neil Horman authored
Signed-off-by:
-
Jeff Mahoney authored
Move the netif_carrier_off() call from tg3_init_one()-> tg3_init_link_config() to tg3_open() as is the convention for most other network drivers. I was getting a panic after a tg3 device failed to initialize due to DMA failure. The oops pointed to the link watch queue with spinlock debugging enabled. Without spinlock debugging, the Oops didn't occur. I suspect that the link event was getting queued but not executed until after the DMA test had failed and the device was freed. The link event was then operating on freed memory, which could contain anything. With this patch applied, the Oops no longer occurs. [ Based upon feedback from Michael Chan, we move netif_carrier_off() to the end of tg3_init_one() instead of moving it to tg3_open() -DaveM ] Signed-off-by:
Jeff Mahoney <jeffm@suse.com> Signed-off-by:
-
Per Liden authored
Signed-off-by:
Per Liden <per.liden@ericsson.com> Signed-off-by:
-
Per Liden authored
The node_map struct can be quite large (516 bytes) and allocating two of them on the stack is not a good idea since we might only have a 4K stack to start with. Signed-off-by:
-
Adrian Bunk authored
This patch contains the following possible cleanups: - make needlessly global code static - #if 0 the following unused global functions: - name_table.c: tipc_nametbl_print() - name_table.c: tipc_nametbl_dump() - net.c: tipc_net_next_node() Signed-off-by:
-
