- 04 Jul, 2020 40 commits
-
-
Chuhong Yuan authored
fimc_md_get_pinctrl() misses a check for pinctrl_lookup_state(). Add the missed check to fix it. Fixes: 4163851f ("[media] s5p-fimc: Use pinctrl API for camera ports configuration]") Signed-off-by:
Chuhong Yuan <hslester96@gmail.com> Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by:
Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
Dafna Hirschfeld authored
When a size error is signaled, it is possible to read a register to see where the error comes from. So, in debugfs the general error 'pic_size_err' can be replaced with 3 more precise errors. Signed-off-by:
Dafna Hirschfeld <dafna.hirschfeld@collabora.com> Acked-by:
Helen Koike <helen.koike@collabora.com> Reviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Chuhong Yuan authored
This driver does not call media_entity_cleanup() in the error handler of tvp5150_registered() and tvp5150_remove(), while it has called media_entity_pads_init() at first. Add the missed calls to fix it. Fixes: 0556f1d5 ("media: tvp5150: add input source selection of_graph support") Signed-off-by:
Marco Felsch <m.felsch@pengutronix.de> Signed-off-by:
-
Dan Carpenter authored
It's not possible for "pcdev->mclk" to be zero because we check for that earlier and set it to 20000000 in that situation. If it were possible, that would be a problem because it could have lead to an Oops in the error handling when we call v4l2_clk_unregister(pcdev->mclk_clk); Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Acked-by:
Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by:
-
Niklas Söderlund authored
Since the driver was picked-up the starting of the PHY have changed quiet a bit. An artifact of these changes is the now poorly named callback confirm_start(). It used to confirm start of the PHY but now performs post PHY start initialization, rename it to phy_post_init() to reflect this. Signed-off-by:
Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Acked-by:
Jacopo Mondi <jacopo+renesas@jmondi.org> Signed-off-by:
-
Stanimir Varbanov authored
Add bit-depth change as one more reason which could change in the middle of the stream. For the worst case the stream is 8bit at the beginning but later in the bit-stream it changes to 10bit. That change should be propagated to the client so that it can take the appropriate action. In that case it has to stop the streaming on the capture queue, re-negotiate the pixel format, allocate new buffers and start the streaming again. Signed-off-by:
Stanimir Varbanov <stanimir.varbanov@linaro.org> Signed-off-by:
-
Gustavo A. R. Silva authored
The tpg_alloc() and vmalloc() functions have no 2-factor argument form, so multiplication factors need to be wrapped in array_size(). This issue was found with the help of Coccinelle and, audited and fixed manually. Addresses-KSPP-ID: https://github.com/KSPP/linux/issues/83Signed-off-by:
Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by:
-
John Cox authored
Check against length in v4l2_buffer rather than vb2_buffer when the buffer is a dmabuf. This makes the single plane test the same as the existing multiplanar test. Signed-off-by:
John Cox <jc@kynesim.co.uk> Signed-off-by:
-
Helen Koike authored
Resizer sink pad is limited by what the ISP can generate. The configurations describes what the resizer can produce. This was tested on a Scarlet device with ChromiumOs, where the selfpath receives 2592x1944 and produces 1600x1200 (which isn't possible without this fix). Fixes: 56e3b29f ("media: staging: rkisp1: add streaming paths") Signed-off-by:
Tomasz Figa <tfiga@chromium.org> Signed-off-by:
-
Krzysztof Kozlowski authored
Fix up inconsistent usage of upper and lowercase letters in "Samsung" and "Exynos" names. "SAMSUNG" and "EXYNOS" are not abbreviations but regular trademarked names. Therefore they should be written with lowercase letters starting with capital letter. The lowercase "Exynos" name is promoted by its manufacturer Samsung Electronics Co., Ltd., in advertisement materials and on website. Although advertisement materials usually use uppercase "SAMSUNG", the lowercase version is used in all legal aspects (e.g. on Wikipedia and in privacy/legal statements on https://www.samsung.com/semiconductor/privacy-global/). Signed-off-by:
Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by:
-
Dafna Hirschfeld authored
When setting the sink format of the 'rkisp1_resizer' the format should be supported by 'rkisp1_isp' on the video source pad. This patch checks this condition and sets the format to default if the condition is false. Fixes: 56e3b29f "media: staging: rkisp1: add streaming paths" Signed-off-by:
-
Dafna Hirschfeld authored
The macros 'RKISP1_DIR_*' are flags that indicate on which pads of the isp subdevice the media bus code is supported. So the prefix RKISP1_ISP_SD_ is better. Signed-off-by:
-
Dafna Hirschfeld authored
The macro RKISP1_DIR_SINK_SRC is a mask of two flags. The macro hides the fact that it's a mask and the code is actually more clear if we replace it the with bitwise-or explicitly. Signed-off-by:
-
Dafna Hirschfeld authored
The rkisp1_resizer's enum callback 'rkisp1_rsz_enum_mbus_code' calls the enum callback of the 'rkisp1_isp' on it's video sink pad. This is a bug, the resizer should support the same formats supported by the 'rkisp1_isp' on the source pad (not the sink pad). Fixes: 56e3b29f "media: staging: rkisp1: add streaming paths" Signed-off-by:
-
Dan Carpenter authored
The devm_ioremap() function doesn't return error pointers, it returns NULL on error. Fixes: f20387df ("media: allegro: add Allegro DVT video IP core driver") Signed-off-by:
-
Laurent Pinchart authored
When debugging issues that involve more than one video queue, messages related to multiple queues get interleaved without any easy way to tell which queue they relate to. Fix this by adding a queue name to vb2_queue, and printing it in all debug messages in the vb2 core and V4L2 layers. If the name isn't set by drivers, it is automatically filled with the queue direction and address. Signed-off-by:
Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by:
-
Benoit Parrot authored
Several drivers implement the same enclosed_rectangle() function to check if a rectangle is enclosed into another. Replace this with the newly added v4l2_rect_enclosed() helper function. Signed-off-by:
Benoit Parrot <bparrot@ti.com> Acked-by:
Andrzej Pietrasiewicz <andrzejtp2010@gmail.com> Reviewed-by:
Lad Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by:
-
Benoit Parrot authored
Add a helper function to check if one rectangle is enclosed inside another. Signed-off-by:
-
Lad Prabhakar authored
This patch adds support for MEDIA_BUS_FMT_SRGGB8_1X8 format for CSI2 input. Signed-off-by:
Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by:
-
Lad Prabhakar authored
Add support for MEDIA_BUS_FMT_SRGGB8_1X8 format in rcar-vin by setting format type to RAW8 in VNMC register and appropriately setting the bpp and bytesperline to enable V4L2_PIX_FMT_SRGGB8. Signed-off-by:
-
Lad Prabhakar authored
Up until now the VIN was capable to convert any of its supported input mbus formats to any of it's supported output pixel formats. With the addition of RAW formats this is no longer true. This patch invalidates the pipeline by adding a check if given vin input format can be converted to supported output pixel format. Signed-off-by:
-
Dinghao Liu authored
pm_runtime_get_sync() increments the runtime PM usage counter even when it returns an error code. Thus a pairing decrement is needed on the error handling path to keep the counter balanced. Signed-off-by:
Dinghao Liu <dinghao.liu@zju.edu.cn> Signed-off-by:
-
Mansur Alisha Shaik authored
Currently we are considering the instances which are available in core->inst list for load calculation in min_loaded_core() function, but this is incorrect because by the time we call decide_core() for second instance, the third instance not filled yet codec_freq_data pointer. Solve this by considering the instances whose session has started. Cc: stable@vger.kernel.org # v5.7+ Fixes: 4ebf9693 ("media: venus: introduce core selection") Tested-by:
Douglas Anderson <dianders@chromium.org> Signed-off-by:
Mansur Alisha Shaik <mansur@codeaurora.org> Signed-off-by:
-
Evgeny Novikov authored
If lirc_dev_init() fails during module initialization, rc_core_init() returns 0 denoting success. This can cause different issues during further operation of the module. The patch fixes the return value of rc_core_init() on the corresponding error handling path. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by:
Evgeny Novikov <novikov@ispras.ru> Signed-off-by:
Sean Young <sean@mess.org> Signed-off-by:
-
Sean Young authored
Found with clang: drivers/media/pci/cx23885/cx23888-ir.c:178:19: warning: unused function 'ns_to_clock_divider' [-Wunused-function] static inline u16 ns_to_clock_divider(unsigned int ns) ^ drivers/media/pci/cx23885/cx23888-ir.c:184:28: warning: unused function 'clock_divider_to_ns' [-Wunused-function] static inline unsigned int clock_divider_to_ns(unsigned int divider) ^ drivers/media/pci/cx23885/cx23888-ir.c:202:19: warning: unused function 'freq_to_clock_divider' [-Wunused-function] static inline u16 freq_to_clock_divider(unsigned int freq, ^ Cc: Andy Walls <awalls@md.metrocast.net> Signed-off-by: -
Sean Young authored
Found with clang: drivers/media/rc/fintek-cir.c:55:20: warning: unused function 'fintek_clear_reg_bit' [-Wunused-function] static inline void fintek_clear_reg_bit(struct fintek_dev *fintek, u8 val, u8 reg) Signed-off-by:
-
Sean Young authored
Since this driver could never transmit IR, setting the tx carrier makes no sense. Fixes: 87284271 ("media: rc: nuvoton: remove rudimentary transmit functionality") Signed-off-by:
-
Sean Young authored
This function has never been used. Found with clang: drivers/media/dvb-frontends/drxk_hard.c:159:19: warning: unused function 'MulDiv32' [-Wunused-function] static inline u32 MulDiv32(u32 a, u32 b, u32 c) Signed-off-by:
-
Hans Verkuil authored
After the removal of the soc_camera driver and the soc_camera.h header the SOC-CAMERA entry in the MAINTAINERS file can also be removed. Signed-off-by:
-
Hans Verkuil authored
Drop all configs with the CONFIG_SOC_CAMERA prefix since those have been removed. SOC_CAMERA support for the sh architecture was removed a long time ago. Drop it from the configs. Signed-off-by:
-
Hans Verkuil authored
Drop all configs with the CONFIG_SOC_CAMERA prefix since those have been removed. Signed-off-by:
-
Hans Verkuil authored
The soc_camera driver has been removed and all board files that used it have been fixed. This header can now be removed altogether. Signed-off-by:
-
Hans Verkuil authored
The soc_camera driver (and related soc_camera-dependent sensor drivers) is obsolete and depends on BROKEN for a long time now. Nobody is using it, so it is time to kill it off. Signed-off-by:
-
Hans Verkuil authored
The soc_camera driver is about to be removed, so drop camera support from this board. Note that the soc_camera driver itself has long since been deprecated and can't be compiled anymore (it depends on BROKEN), so camera support on this board has been broken for a long time (at least since 4.9 when the pxa_camera.c was removed from soc_camera). Note that there is a new pxa_camera.c driver that replaced the old soc_camera based driver, but using that would require these boards to be converted to use the device tree. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Hans Verkuil authored
The soc_camera driver is about to be removed, so drop camera support from this board. Note that the soc_camera driver itself has long since been deprecated and can't be compiled anymore (it depends on BROKEN), so camera support on this board has been broken for a long time (at least since 4.6 when the omap1_camera.c was removed from soc_camera). Signed-off-by:
-
Hans Verkuil authored
The soc_camera.h header driver is about to be removed, so drop camera support from this board. Note that the soc_camera driver itself has long since been deprecated and can't be compiled anymore (it depends on BROKEN), so camera support on this board has been broken for a long time (at least since 4.6 when the mx2_camera.c was removed from soc_camera). Signed-off-by:
-
Hans Verkuil authored
Remove the confusing SoC Camera reference. Signed-off-by:
-
Hans Verkuil authored
Remove the confusing SoC Camera reference. Signed-off-by:
-
Jeff Chase authored
Add a CEC device driver for the Chrontel ch7322 CEC conroller. This is an I2C device capable of sending and receiving CEC messages. Signed-off-by:
Jeff Chase <jnchase@google.com> Signed-off-by:
-
Jeff Chase authored
Use of the cec notifier framework is required to support CEC_CAP_CONNECTOR_INFO but some devices do not want physical address updates from the notifier. This adds an option to allow registering with a cec notifier without getting address updates. [hans: document the new adap_controls_phys_addr bool] Signed-off-by:
-
