- 18 Oct, 2018 13 commits
-
-
Petr Machata authored
A switchdev-capable driver that is aware of VXLAN may need to query VXLAN FDB. In the particular case of mlxsw, this functionality is limited to querying UC FDBs. Those being easier to deal with than the general case of RDST chain traversal, introduce an interface to query specifically UC FDBs: vxlan_fdb_find_uc(). Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Petr Machata authored
When offloading VXLAN devices, drivers need to know about events in VXLAN FDB database. Since VXLAN models a bridge, it is natural to distribute the VXLAN FDB notifications using the pre-existing switchdev notification mechanism. To that end, introduce two new notification types: SWITCHDEV_VXLAN_FDB_ADD_TO_DEVICE and SWITCHDEV_VXLAN_FDB_DEL_TO_DEVICE. Introduce a new function, vxlan_fdb_switchdev_call_notifiers() to send the new notifier types, and a struct switchdev_notifier_vxlan_fdb_info to communicate the details of the FDB entry under consideration. Invoke the new function from vxlan_fdb_notify(). Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ido Schimmel authored
Add the ability to determine whether a netdev is a VxLAN netdev by calling the above mentioned function that checks the netdev's rtnl_link_ops. This will allow modules to identify netdev events involving a VxLAN netdev and act accordingly. For example, drivers capable of VxLAN offload will need to configure the underlying device when a VxLAN netdev is being enslaved to an offloaded bridge. Convert nfp to use the newly introduced helper. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ido Schimmel authored
When a local route that matches the source IP of an offloaded NVE tunnel is notified, the driver needs to program it to perform NVE decapsulation instead of merely trapping packets to the CPU. This patch complements "mlxsw: spectrum_router: Enable local routes promotion to perform NVE decap" where existing local routes were promoted to perform NVE decapsulation. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ido Schimmel authored
802.1D FIDs are used to represent VLAN-unaware bridges and currently this is the only type of FID that supports NVE configuration. Since the NVE tunnel device does not take a reference on the FID, it is possible for the FID to be destroyed when it still has NVE configuration. Therefore, when destroying the FID make sure to disable its NVE configuration. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ido Schimmel authored
The common NVE core expects each encapsulation type to implement a certain set of operations that are specific to this type and the currently used ASIC. These operations include things such as the ability to determine whether a certain NVE configuration can be offloaded and ASIC-specific initialization for this type. Implement these operations for VxLAN on the Spectrum ASIC. Spectrum-2 support will be added by a future patchset. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ido Schimmel authored
The Spectrum ASIC supports different types of NVE encapsulations (e.g., VxLAN, NVGRE) with more types to be supported by future ASICs. Despite being different, all these encapsulations share some common functionality such as the enablement of NVE encapsulation on a given filtering identifier (FID) and the addition of remote VTEPs to the linked-list of VTEPs that traffic should be flooded to. Implement this common core and allow different ASICs to register different operations for different encapsulation types. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ido Schimmel authored
Drivers that support tunnel decapsulation (IPinIP or NVE) need to configure the underlying device to conform to the behavior outlined in RFC 6040 with respect to the ECN bits. This behavior is implemented by INET_ECN_decapsulate() which requires an skb to be passed where the ECN CE bit can be potentially set. Since these drivers do not need to mark an skb, but only configure the device to do so, factor out the business logic to __INET_ECN_decapsulate() and potentially perform the marking in INET_ECN_decapsulate(). This allows drivers to invoke __INET_ECN_decapsulate() and configure the device. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Suggested-by: Petr Machata <petrm@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ido Schimmel authored
Drivers that support VxLAN offload need to be able to sanitize the configuration of the VxLAN device and accept / reject its offload. For example, mlxsw requires that the local IP of the VxLAN device be set and that packets be flooded to unicast IP(s) and not to a multicast group. Expose the functions that perform such checks. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ido Schimmel authored
In the device, different VRFs (routing tables) are represented using different virtual routers (VRs) and thus the kernel's table IDs are mapped to VR IDs. Allow internal users of the IP router to query the VR ID based on a kernel table ID. This is needed - for example - when configuring the underlay VR where VxLAN encapsulated packets will undergo an L3 lookup. In this case, the kernel's table ID is derived from the VxLAN device's configuration. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ido Schimmel authored
When an NVE tunnel with an IP underlay (e.g., VxLAN) is configured the local route to the tunnel's source IP needs to be promoted to perform NVE decapsulation. Expose an API in the unicast IP router to promote / demote local routes. The case where a local route is configured after the creation of the NVE tunnel will be handled in a subsequent patch in the set. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ido Schimmel authored
Current APIs only allow looking for a FID and creating it in case it does not exist. With VxLAN, in case the bridge to which the VxLAN device was enslaved does not already have a corresponding FID, then it means that something went wrong that we need to be aware of. Add an API to look up a FID, but without creating it in order to catch above-mentioned situation. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ido Schimmel authored
In the device, the VNI and the list of remote VTEPs a packet should be flooded to is a property of the filtering identifier (FID). During encapsulation, the VNI is taken from the FID the packet was classified to. During decapsulation, the overlay packet is injected into a bridge and classified to a FID based on the VNI it came with. Allow NVE configuration for a FID. Currently, this is only supported with 802.1D FIDs which are used for VLAN-unaware bridges. However, NVE configuration is going to be supported with 802.1Q FIDs which is why the related fields are placed in the common FID struct. Since the device requires a 1:1 mapping between FID and VNI, the driver maintains a hashtable keyed by VNI and checks if the VNI is already associated with an existing FID. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 16 Oct, 2018 27 commits
-
-
Daniel Borkmann authored
Eric reported that syzkaller triggered a splat in tcp_cleanup_ulp() where assertion sock_owned_by_me() failed. This happened through inet_csk_prepare_forced_close() first releasing the socket lock, then calling into tcp_done(newsk) which is called after the inet_csk_prepare_forced_close() and therefore without the socket lock held. The sock_owned_by_me() assertion can generally be removed as the only place where tcp_cleanup_ulp() is called from now is out of inet_csk_destroy_sock() -> sk->sk_prot->destroy() where socket is in dead state and unreachable. Therefore, add a comment why the check is not needed instead. Fixes: 8b9088f8 ("tcp, ulp: enforce sock_owned_by_me upon ulp init and cleanup") Reported-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Yunsheng Lin says: ==================== Some cleanup and bugfix for desc filling When retransmiting packets, skb_cow_head which is called in hns3_set_tso may clone a new header. And driver will clear the checksum of the header after doing DMA map, so HW will read the old header whose L3 checksum is not cleared and calculate a wrong L3 checksum. Also When sending a big fragment using multiple buffer descriptor, hns3 does one maping, but do multiple unmapping when tx is done, which may cause unmapping problem. This patchset does some cleanup before fixing the above problem. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Fuyun Liang authored
When sending a big fragment using multiple buffer descriptor, hns3 does one maping, but do multiple unmapping when tx is done, which may cause unmapping problem. To fix it, this patch makes sure the value of desc_cb.length of the non-first bd is zero. If desc_cb.length is zero, we do not unmap the buffer. Fixes: 76ad4f0e ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC") Signed-off-by: Fuyun Liang <liangfuyun1@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Fuyun Liang authored
To keep symmetrical, this patch renames hns_nic_dma_unmap to hns3_clear_desc. Signed-off-by: Fuyun Liang <liangfuyun1@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Fuyun Liang authored
This patch unifies big tx fragment handling for tso and non-tso case. Signed-off-by: Fuyun Liang <liangfuyun1@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Peng Li authored
To solve the L3 checksum error problem which happens when driver does not clear L3 checksum, DMA map should be done after calling skb_cow_head. This patch moves DMA map into hns3_fill_desc to ensure that DMA map is done after calling skb_cow_head. Fixes: 76ad4f0e ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC") Signed-off-by: Fuyun Liang <liangfuyun1@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Peng Li authored
This patch removes hns3_fill_desc_tso in preparation for fixing some desc filling bug, because for tso or non-tso case, we will use the unified hns3_fill_desc. Signed-off-by: Fuyun Liang <liangfuyun1@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Rahul Verma says: ==================== Align PTT and add various link modes. This series aligns the ptt propagation as local ptt or global ptt. Adds new transceiver modes, speed capabilities and board config, which is utilized to display the enhanced link modes, media types and speed. Enhances the link with detailed information. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Rahul Verma authored
Newly added link modes are required to be added during setting link modes. If the new link mode is not available during qed_set_link, it may cause link getting down due to empty supported capability, being passed to MFW, after setting autoneg off/on with current/supported speed. Signed-off-by: Rahul Verma <Rahul.Verma@cavium.com> Signed-off-by: Ariel Elior <ariel.elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Rahul Verma authored
Set link mode after checking available "supported" link caps of the port. Signed-off-by: Rahul Verma <Rahul.Verma@cavium.com> Signed-off-by: Ariel Elior <ariel.elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Rahul Verma authored
Added transceiver type, speed capability and board types in HSI, are utilizing to display the accurate link information in ethtool. Signed-off-by: Rahul Verma <Rahul.Verma@cavium.com> Signed-off-by: Ariel Elior <ariel.elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Rahul Verma authored
Added transceiver modes with different speed and media type, speed capability and supported board types in HSI, which will be utilizing to display correct specification of link modes and speed type. Signed-off-by: Rahul Verma <Rahul.Verma@cavium.com> Signed-off-by: Ariel Elior <ariel.elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Rahul Verma authored
Align the use of local PTT to propagate through the qed_mcp* API's. Global ptt should not be used. Register access should be done through layers. Register address is mapped into a PTT, PF translation table. Several interface functions require a PTT to direct read/write into register. There is a pool of PTT maintained, and several PTT are used simultaneously to access device registers in different flows. Same PTT should not be used in flows that can run concurrently. To avoid running out of PTT resources, too many PTT should not be acquired without releasing them. Every PF has a global PTT, which is used throughout the life of PF, in most important flows for register access. Generic functions acquire the PTT locally and release after the use. This patch aligns the use of Global PTT and Local PTT accordingly. Signed-off-by: Rahul Verma <rahul.verma@cavium.com> Signed-off-by: Ariel Elior <ariel.elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
YueHaibing authored
Fixes the following sparse warning: drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_utils_fw2x.c:282:5: warning: symbol 'aq_fw2x_update_stats' was not declared. Should it be static? Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
David Ahern says: ==================== net: Kernel side filtering for route dumps Implement kernel side filtering of route dumps by protocol (e.g., which routing daemon installed the route), route type (e.g., unicast), table id and nexthop device. iproute2 has been doing this filtering in userspace for years; pushing the filters to the kernel side reduces the amount of data the kernel sends and reduces wasted cycles on both sides processing unwanted data. These initial options provide a huge improvement for efficiently examining routes on large scale systems. v2 - better handling of requests for a specific table. Rather than walking the hash of all tables, lookup the specific table and dump it - refactor mr_rtm_dumproute moving the loop over the table into a helper that can be invoked directly - add hook to return NLM_F_DUMP_FILTERED in DONE message to ensure it is returned even when the dump returns nothing ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
David Ahern authored
Unlike IPv6, IPv4 does not have routes marked with RTF_PREFIX_RT. If the flag is set in the dump request, just return. In the process of this change, move the CLONE check to use the new filter flags. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David Ahern authored
Similar to IPv4, IPv6 fib no longer contains cloned routes. If a user requests a route dump for only cloned entries, no sense walking the FIB and returning everything. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David Ahern authored
Update the dump request parsing in MPLS for the non-INET case to enable kernel side filtering. If INET is disabled the only filters that make sense for MPLS are protocol and nexthop device. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David Ahern authored
Update parsing of route dump request to enable kernel side filtering. Allow filtering results by protocol (e.g., which routing daemon installed the route), route type (e.g., unicast), table id and nexthop device. These amount to the low hanging fruit, yet a huge improvement, for dumping routes. ip_valid_fib_dump_req is called with RTNL held, so __dev_get_by_index can be used to look up the device index without taking a reference. From there filter->dev is only used during dump loops with the lock still held. Set NLM_F_DUMP_FILTERED in the answer_flags so the user knows the results have been filtered should no entries be returned. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David Ahern authored
Implement kernel side filtering of routes by egress device index and table id. If the table id is given in the filter, lookup table and call mr_table_dump directly for it. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David Ahern authored
Move per-table loops from mr_rtm_dumproute to mr_table_dump and export mr_table_dump for dumps by specific table id. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David Ahern authored
Implement kernel side filtering of routes by egress device index and protocol. MPLS uses only a single table and route type. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David Ahern authored
Implement kernel side filtering of routes by table id, egress device index, protocol, and route type. If the table id is given in the filter, lookup the table and call fib6_dump_table directly for it. Move the existing route flags check for prefix only routes to the new filter. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David Ahern authored
Implement kernel side filtering of routes by table id, egress device index, protocol and route type. If the table id is given in the filter, lookup the table and call fib_table_dump directly for it. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David Ahern authored
Add struct fib_dump_filter for options on limiting which routes are returned in a dump request. The current list is table id, protocol, route type, rtm_flags and nexthop device index. struct net is needed to lookup the net_device from the index. Declare the filter for each route dump handler and plumb the new arguments from dump handlers to ip_valid_fib_dump_req. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David Ahern authored
With dump filtering we need a way to ensure the NLM_F_DUMP_FILTERED flag is set on a message back to the user if the data returned is influenced by some input attributes. Normally this can be done as messages are added to the skb, but if the filter results in no data being returned, the user could be confused as to why. This patch adds answer_flags to the netlink_callback allowing dump handlers to set the NLM_F_DUMP_FILTERED at a minimum in the NLMSG_DONE message ensuring the flag gets back to the user. The netlink_callback space is initialized to 0 via a memset in __netlink_dump_start, so init of the new answer_flags is covered. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller authored
Daniel Borkmann says: ==================== pull-request: bpf-next 2018-10-16 The following pull-request contains BPF updates for your *net-next* tree. The main changes are: 1) Convert BPF sockmap and kTLS to both use a new sk_msg API and enable sk_msg BPF integration for the latter, from Daniel and John. 2) Enable BPF syscall side to indicate for maps that they do not support a map lookup operation as opposed to just missing key, from Prashant. 3) Add bpftool map create command which after map creation pins the map into bpf fs for further processing, from Jakub. 4) Add bpftool support for attaching programs to maps allowing sock_map and sock_hash to be used from bpftool, from John. 5) Improve syscall BPF map update/delete path for map-in-map types to wait a RCU grace period for pending references to complete, from Daniel. 6) Couple of follow-up fixes for the BPF socket lookup to get it enabled also when IPv6 is compiled as a module, from Joe. 7) Fix a generic-XDP bug to handle the case when the Ethernet header was mangled and thus update skb's protocol and data, from Jesper. 8) Add a missing BTF header length check between header copies from user space, from Wenwen. 9) Minor fixups in libbpf to use __u32 instead u32 types and include proper perf_event.h uapi header instead of perf internal one, from Yonghong. 10) Allow to pass user-defined flags through EXTRA_CFLAGS and EXTRA_LDFLAGS to bpftool's build, from Jiri. 11) BPF kselftest tweaks to add LWTUNNEL to config fragment and to install with_addr.sh script from flow dissector selftest, from Anders. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-