- 02 Jun, 2008 4 commits
-
-
Andrew Victor authored
Convert the following AT91RM9200-based boards to the new-style UART initialization: - Conitec ARM&EVA - Atmel AT91RM9200-DK - Embest ATEB9200 - Atmel AT91RM9200-EK - KwikByte KB920x Signed-off-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
Andrew Victor authored
Default config files for the three AT91-based boards available from Calao Systems: USB_A9260, USB_A9263 and QIL_A9260. Signed-off-by: Grégory Hermant <gregory.hermant@calao-systems.com> Signed-off-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
Andrew Victor authored
Add support for three AT91-based boards available from Calao Systems: USB_A9260, USB_A9263 and QIL_A9260. Signed-off-by: Grégory Hermant <gregory.hermant@calao-systems.com> Signed-off-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
Andrew Victor authored
Cleanup the YL9200 board-support file. Other things fixed are: - Use new-style UART initialization - Register all LEDs as gpio_leds. - NOR Flash error noted in comments fixed by increasing YL9200_FLASH_SIZE - The only I2C device is the AT24C eeprom. - Setup of NWAIT pin and programming of SMC controller for the LCD/VGA. - Configure touchscreen interrupt pin. Also adding the board to the KConfig and Makefile. Signed-off-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
- 18 May, 2008 28 commits
-
-
Linus Torvalds authored
-
git://jdelvare.pck.nerim.net/jdelvare-2.6Linus Torvalds authored
* 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6: i2c/max6875: Really prevent 24RF08 corruption i2c-amd756: Fix functionality flags i2c: Kill the old driver matching scheme i2c: Convert remaining new-style drivers to use module aliasing i2c: Switch pasemi to the new device/driver matching scheme i2c: Clean up Blackfin BF527 I2C device declarations i2c-nforce2: Disable the second SMBus channel on the DFI Lanparty NF4 Expert i2c: New co-maintainer
-
Geert Uytterhoeven authored
Add multi_defconfig, to build a kernel for all supported m68k platforms, excluding Sun 3 (Sun 3 kernels are incompatible with all other m68k platforms) Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Geert Uytterhoeven authored
Update the m68k defconfigs Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Geert Uytterhoeven authored
m68k: Correctly handle multi-ISA at runtime in multi-platform kernels Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Geert Uytterhoeven authored
The *_ISA type defines are quite generic and cause namespace conflicts (e.g. with `AMIGAHW_DECLARE(GG2_ISA)' in <asm/amigahw.h>) for some kernel configurations. Use ISA_TYPE_* to avoid such conflicts. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Geert Uytterhoeven authored
UIO needs m68k_mmutype: ERROR: "m68k_mmutype" [drivers/uio/uio.ko] undefined! (noticed by Christian T. Steigies) Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Geert Uytterhoeven authored
Mark Q40/Q60 floppy support broken: arch/m68k/q40/q40ints.c: In function 'q40_irq_handler': arch/m68k/q40/q40ints.c:214: error: implicit declaration of function 'floppy_hardint' Including <asm/floppy.h> doesn't help, as it causes a lot of additional error messages (cfr. Sun 3x). Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Geert Uytterhoeven authored
According to the tests in do_initcalls(), the proper error code in case no device is found is -ENODEV, not -ENXIO or -EIO. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Geert Uytterhoeven authored
Some input drivers do not check whether they're actually running on the correct platform, causing multi-platform kernels to crash if they are not. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Geert Uytterhoeven authored
Some network drivers do not check whether they're actually running on the correct platform, causing multi-platform kernels to crash if they are not. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Geert Uytterhoeven authored
The Apollo frame buffer device driver (dnfb) doesn't check whether it's actually running on Apollo hardware, causing a crash if it isn't. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Geert Uytterhoeven authored
The Macintosh IDE driver (macide) doesn't check whether it's actually running on Mac hardware, causing a crash if it isn't. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Geert Uytterhoeven authored
When running a HP300-enabled kernel on non-HP300 hardware, a test in the early startup code jumps to the wrong label, causing a double bus fault. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Geert Uytterhoeven authored
Use `__builtin_trap()' instead of `asm volatile("illegal")' in the m68k BUG() macros (as suggested by Andrew Pinski), to kill warnings in code that assumes BUG() does not return. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Geert Uytterhoeven authored
m68k vme_scc: - make scc_ports[] static - kill unused global scc_initialized Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Geert Uytterhoeven authored
The Hisoft Whippet PCMCIA serial driver has been removed a long time ago, but it's Kconfig symbol still existed. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Geert Uytterhoeven authored
Correct FB_HP300 dependencies: - FB_HP300 doesn't depend only on HP300, but also on DIO (which depends on HP300) - FB_HP300 does not need FB_CFB_FILLRECT Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Geert Uytterhoeven authored
CONFIG_FB_DAFB is a leftover from pre-Kconfig Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Geert Uytterhoeven authored
Convert access_ok() from a macro to an inline function, so the compiler no longer complains about unused variables: fs/read_write.c: In function 'rw_copy_check_uvector': fs/read_write.c:556: warning: unused variable 'buf' Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Jean Delvare authored
i2c-core takes care of the possible corruption of 24RF08 chips for quite some times, so device devices no longer need to do it. And they really should not, as applying the prevention twice voids it. I thought that I had fixed all drivers long ago but apparently I had missed that one. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Ben Gardner <bgardner@wabtec.com>
-
Jean Delvare authored
The i2c-amd756 driver pretends to support SMBus process call transactions but actually does not. Fix it. Signed-off-by: Jean Delvare <khali@linux-fr.org>
-
Jean Delvare authored
Remove the old driver_name/type scheme for i2c driver matching. Only the standard aliasing model will be used from now on. Signed-off-by: Jean Delvare <khali@linux-fr.org>
-
Jean Delvare authored
Update all the remaining new-style i2c drivers to use standard module aliasing instead of the old driver_name/type driver matching scheme. Note that the tuner driver is a bit quirky at the moment, as it overwrites i2c_client.name with arbitrary strings. We write "tuner" back on remove, to make sure that driver cycling will work properly, but there may still be troublesome corner cases. Signed-off-by: Jean Delvare <khali@linux-fr.org>
-
Jean Delvare authored
The old device/driver matching scheme is going away so stop using it. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Olof Johansson <olof@lixom.net>
-
Jean Delvare authored
I2C_BOARD_INFO() now sets the type field so no need to set it separatetly. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Bryan Wu <cooloney@kernel.org>
-
Jean Delvare authored
There is a strange chip at 0x2e on the second SMBus channel of the DFI Lanparty NF4 Expert motherboard. Accessing the chip reboots the system. As there's nothing interesting on this SMBus channel, the easiest and safest thing to do is to disable it on that board. This is a better fix to bug #5889 than the it87 driver update that was done originally: http://bugzilla.kernel.org/show_bug.cgi?id=5889Signed-off-by: Jean Delvare <khali@linux-fr.org>
-
Jean Delvare authored
Ben Dooks agreed to become my co-maintainer for the i2c subsystem. In particular, Ben will help with drivers for embedded systems, of which my experience is inexistent. Thanks Ben and welcome on board! Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Ben Dooks <ben-linux@fluff.org>
-
- 17 May, 2008 8 commits
-
-
Linus Torvalds authored
* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] pxa: spitz wants PXA27x UDC definitions [ARM] pxa: fix pxafb build when cpufreq is enabled [ARM] fix parenthesis in include/asm-arm/arch-omap/control.h [ARM] colibri: fix support for DM9000 ethernet device [ARM] arm/kernel/arthur.c: add MODULE_LICENSE [ARM] 5037/1: Orion: fix DNS323/Kurobox Pro PCI initialisation [ARM] 5034/1: fix arm{925,926,940,946} dma_flush_range() in WT mode [ARM] export copy_page [ARM] 5026/1: locomo: add .settype for gpio and several small fixes ARM: OMAP: Fixed comments on global PRM register usage ARM: OMAP: Add PARENT_CONTROLS_CLOCK flag to dpll5_m2_ck ARM: OMAP: PRCM fixes to ssi clock handling ARM: OMAP: Add fuctional clock enabler for iva2 ARM: OMAP: Fix 34xx to use correct shift values for gpio2-6 fclks ARM: OMAP: Keymap fix for palmte and palmz71 ARM: OMAP: Fix Unbalanced enable for IRQ in omap mailbox ARM: OMAP: DMA: Fix incorrect channel linking ARM: OMAP: Warn on disabling clocks with no users ARM: OMAP: Add calls to omap2_set_globals_*() ARM: OMAP: Update MMC header to fix compile
-
Russell King authored
-
Russell King authored
... so include the header file. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
Russell King authored
If cpufreq is enabled, pxafb wants to call the removed get_clk_frequency_khz() function for a debug printk. Remove this reference. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
Mariusz Kozlowski authored
Parenthesis fix in include/asm-arm/arch-omap/control.h Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl> Cc: Paul Walmsley <paul@pwsan.com> Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
Michael Abbott authored
Two changes are necessary to enable proper operation of the DM9000 device with the Colibri PXA 270 board: firstly, the IRQ type needs to be configured for rising edge interrupts, and secondly this configuration needs to be communicated through to the DM9000. [akpm@linux-foundation.org: remove set_irq_type() call as per ben-linux request] Signed-off-by: Michael Abbott <michael.abbott@diamond.ac.uk> Cc: Daniel Mack <daniel@caiaq.org> Cc: Jeff Garzik <jeff@garzik.org> Cc: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
Adrian Bunk authored
This patch adds the missing MODULE_LICENSE("GPL"). Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-