- 20 Jul, 2017 20 commits
-
-
Gustavo A. R. Silva authored
Check for i2c_algorithm structures that are only stored in the algo field of an i2c_adapter structure. This field is declared const, so i2c_algorithm structures that have this property can be declared as const also. This issue was identified using Coccinelle and the following semantic patch: @r disable optional_qualifier@ identifier i; position p; @@ static struct i2c_algorithm i@p = { ... }; @ok@ identifier r.i; struct i2c_adapter e; position p; @@ e.algo = &i@p; @bad@ position p != {r.p,ok.p}; identifier r.i; @@ i@p @depends on !bad disable optional_qualifier@ identifier r.i; @@ static +const struct i2c_algorithm i = { ... }; Signed-off-by:Gustavo A. R. Silva <garsilva@embeddedor.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
Gustavo A. R. Silva authored
Check for i2c_algorithm structures that are only stored in the algo field of an i2c_adapter structure. This field is declared const, so i2c_algorithm structures that have this property can be declared as const also. This issue was identified using Coccinelle and the following semantic patch: @r disable optional_qualifier@ identifier i; position p; @@ static struct i2c_algorithm i@p = { ... }; @ok@ identifier r.i; struct i2c_adapter e; position p; @@ e.algo = &i@p; @bad@ position p != {r.p,ok.p}; identifier r.i; @@ i@p @depends on !bad disable optional_qualifier@ identifier r.i; @@ static +const struct i2c_algorithm i = { ... }; Signed-off-by: -
Gustavo A. R. Silva authored
Check for i2c_algorithm structures that are only stored in the algo field of an i2c_adapter structure. This field is declared const, so i2c_algorithm structures that have this property can be declared as const also. This issue was identified using Coccinelle and the following semantic patch: @r disable optional_qualifier@ identifier i; position p; @@ static struct i2c_algorithm i@p = { ... }; @ok@ identifier r.i; struct i2c_adapter e; position p; @@ e.algo = &i@p; @bad@ position p != {r.p,ok.p}; identifier r.i; @@ i@p @depends on !bad disable optional_qualifier@ identifier r.i; @@ static +const struct i2c_algorithm i = { ... }; Signed-off-by: -
Daniel Scheller authored
Return 0 instead of -EINVAL in get_frontend if no demod mode is active. This fixes ie. dvb-fe-tool getting confused and assuming a DVBv3 FE on idle frontends when the FE has been put to sleep using sleep(). Also, in read_status(), don't immediately return when no demod is active, so the remaining code has a chance to clear the signal statistics. Signed-off-by:
Daniel Scheller <d.scheller@gmx.net> Signed-off-by:
-
Daniel Scheller authored
Signed-off-by:
-
Daniel Scheller authored
Adds a stv0910_single modparm which, when set, configures the stv0910 to run in single demodulator mode, currently intended for high bit rate testing. Signed-off-by:
Richard Scobie <r.scobie@clear.net.nz> Signed-off-by:
-
Daniel Scheller authored
This adds all required glue code to support - in conjunction with the new stv0910 and stv6111 demod/tuner drivers and additionally the lnbh25 LNB controller driver - all current DVB-S/S2 hardware (bridges and flex modules) from Digital Devices like the DD CineS2 V7 and V7A, current S2 V4 DuoFlex modules, and probably all upcoming devices based on this STV0910/STV6111/LNBH25 hardware stack. Signed-off-by:
-
Daniel Scheller authored
The returned value is required for further evaluation of the exact demodulator chip (stv090x or stv0910). Signed-off-by:
-
Daniel Scheller authored
This adds a frontend driver for the ST STV6111 DVB-S/S2 tuners. Like the stv0910 demod frontend driver, this driver originates from the Digital Devices' dddvb vendor driver package as of version 0.9.29, and was cleaned up aswell. No functionality had to be removed though. Any camel case has been converted to kernel_case, fixup patch has been proposed upstream. Permission to reuse and mainline the driver code was formally granted by Ralph Metzler <rjkm@metzlerbros.de>. Signed-off-by:
-
Daniel Scheller authored
This was missing from the frontend_ops. Signed-off-by:
-
Daniel Scheller authored
Original code at least has some signed/unsigned issues, resulting in values like 32dBm. Implement signal strength readout to work without asking the attached tuner, and use a lookup table instead of log calc. Values reported appear plausible, gathered from feedback from several testers. Signed-off-by:
-
Daniel Scheller authored
Implements stream_id filter and scrambling code setup in start() and also sets FE_CAN_MULTISTREAM in frontend_ops. This enables the driver to properly receive and handle multistream transponders, functionality has been reported working fine by testers with access to such streams, in conjunction with VDR on the userspace side. The code snippet originates from the original vendor's dddvb driver package and has been made working properly with the current in-kernel DVB core API. Signed-off-by:
-
Daniel Scheller authored
Fixes smatch error: drivers/media/dvb-frontends/stv0910.c:715 dvbs2_nbch() error: buffer overflow 'nbch[fectype]' 2 <= 28 Also, fixes the nbch array table by adding the DUMMY_PLF element at the top to match the enums (table element order was off by one before). Patch sent upstream aswell. Cc: Ralph Metzler <rjkm@metzlerbros.de> Signed-off-by:
-
Daniel Scheller authored
This adds a multi frontend driver for the ST STV0910 DVB-S/S2 demodulator frontends. The driver code originates from the Digital Devices' dddvb vendor driver package as of version 0.9.29, and has been cleaned up from core API usage which isn't supported yet in the kernel, and additionally all obvious style issues have been resolved. All camel case and allcaps have been converted to kernel_case and lowercase. Patches have been sent to the vendor package maintainers to fix this aswell. Signal statistics acquisition has been refactored to comply with standards. Permission to reuse and mainline the driver code was formally granted by Ralph Metzler <rjkm@metzlerbros.de>. Signed-off-by:
-
Philipp Zabel authored
Now that the multiplexer framework is merged, drop the temporary mmio-mux implementation from the video-mux driver and convert it to use the multiplexer API. [mchehab@s-opensource.com: fix a merge conflict at Kconfig] Signed-off-by:
Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
-
Arnd Bergmann authored
gcc-7 notices that we copy a fixed length string into another string of the same size, with additional characters: drivers/media/usb/usbvision/usbvision-i2c.c: In function 'usbvision_i2c_register': drivers/media/usb/usbvision/usbvision-i2c.c:190:36: error: '%d' directive writing between 1 and 11 bytes into a region of size between 0 and 47 [-Werror=format-overflow=] sprintf(usbvision->i2c_adap.name, "%s-%d-%s", i2c_adap_template.name, ^~~~~~~~~~ drivers/media/usb/usbvision/usbvision-i2c.c:190:2: note: 'sprintf' output between 4 and 76 bytes into a destination of size 48 Using snprintf() makes the code more robust in general, but will still trigger a possible warning about truncation in the string. We know this won't happen as the template name is always "usbvision", so we can easily avoid the warning as well by using this as the format string directly. Signed-off-by:Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Todor Tomov authored
Add helper functions for mbus to/from mplane pixel format conversion. Signed-off-by:
Todor Tomov <todor.tomov@linaro.org> Signed-off-by:
-
Ulrich Hecht authored
Fixes a crash on Renesas R8A7793 Gose board that uses these "compatible" entries. Signed-off-by:
Ulrich Hecht <ulrich.hecht+renesas@gmail.com> Tested-by:
Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by:
-
Anton Sviridenko authored
This patch enables support for non-Bluecherry labeled solo6110 based PCI cards which have 3 x TW2864B chips and one TW2865. These cards are displayed by lspci -nn as "Softlogic Co., Ltd. SOLO6110 H.264 Video encoder/decoder [9413:6110]" Bluecherry cards have 4 x TW2864A. According to datasheet register 0xFF of TW2864B chips contains value 0x6A or 0x6B depending on revision which being shifted 3 bits right gives value 0x0d. Existing version of solo6x10 fails on these cards with [276582.344942] solo6x10 0000:07:00.0: Probing Softlogic 6110 [276582.402151] solo6x10 0000:07:00.0: Could not initialize any techwell chips [276582.402781] solo6x10: probe of 0000:07:00.0 failed with error -22 Signed-off-by:
Anton Sviridenko <anton@corp.bluecherry.net> Acked-by:
Andrey Utkin <andrey_utkin@fastmail.com> Signed-off-by:
-
Ramesh Shanmugasundaram authored
Add r8a7796 DRIF bindings. Signed-off-by:
Ramesh Shanmugasundaram <ramesh.shanmugasundaram@bp.renesas.com> Acked-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
- 19 Jul, 2017 20 commits
-
-
Mauro Carvalho Chehab authored
drivers/media/i2c/adv748x/adv748x-csi2.c: In function 'adv748x_csi2_init_controls': drivers/media/i2c/adv748x/adv748x-csi2.c:251:20: warning: variable 'ctrl' set but not used [-Wunused-but-set-variable] struct v4l2_ctrl *ctrl; ^~~~ Signed-off-by: -
Kieran Bingham authored
The ADV7481 is an integrated video decoder and combined HDMI/MHL receiver. Signed-off-by:
Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Acked-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Kieran Bingham authored
Provide support for the ADV7481 and ADV7482. The driver is modelled with 4 subdevices to allow simultaneous streaming from the AFE (Analog front end) and HDMI inputs though two CSI TX entities. The HDMI entity is linked to the TXA CSI bus, whilst the AFE is linked to the TXB CSI bus. The driver is based on a prototype by Koji Matsuoka in the Renesas BSP, and an earlier rework by Niklas Söderlund. Signed-off-by:
-
Kieran Bingham authored
Create device tree bindings documentation for the ADV748x. The ADV748x supports both the ADV7481 and ADV7482 chips which provide analogue decoding and HDMI receiving capabilities Signed-off-by:
-
Shy More authored
Below was the trival error flagged by checkpatch.pl: ERROR: space prohibited after that open parenthesis '(' Signed-off-by:Shy More <smklearn@gmail.com> Signed-off-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by:
-
Shy More authored
Below was the trivial wanrning flagged by checkpatch.pl WARNING: Block comments use * on subsequent lines Signed-off-by:
-
Philipp Guendisch authored
This patch fixed code alignment to open paranthesis. Semantic should not be affected by this patch. It has been rebased on top of media_tree atomisp branch Signed-off-by:
Philipp Guendisch <philipp.guendisch@fau.de> Signed-off-by:
Chris Baller <chris.baller@gmx.de> Signed-off-by:
-
Philipp Guendisch authored
This patch fixed comment style. Semantic should not be affected. There are also two warnings left about too long lines, which reduce readability if changed. Signed-off-by:
-
Amitoj Kaur Chawla authored
Conditionally calling kfree()/vfree() can be replaced by a call to kvfree() which handles both kmalloced memory and vmalloced memory. The resulting wrapper function has been replaced with direct calls to kvfree(). This change was made with the help of the following Coccinelle semantic patch: //<smpl> @@ expression a; @@ - if(...) { vfree(a); } - else { kfree(a); } + kvfree(a); // </smpl> Signed-off-by:Amitoj Kaur Chawla <amitoj1606@gmail.com> Signed-off-by:
-
Hari Prasath authored
kstrdup kernel primitive can be used to replace kmalloc followed by string copy. This was reported by coccinelle tool. Signed-off-by:
Hari Prasath <gehariprasath@gmail.com> Signed-off-by:
-
Arvind Yadav authored
acpi_device_id are not supposed to change at runtime. All functions working with acpi_device_id provided by <acpi/acpi_bus.h> work with const acpi_device_id. So mark the non-const structs as const. File size before: text data bss dec hex filename 10754 1360 4 12118 2f56 drivers/staging/media/atomisp/i2c/gc2235.o File size After adding 'const': text data bss dec hex filename 10818 1296 4 12118 2f56 drivers/staging/media/atomisp/i2c/gc2235.o Signed-off-by:
Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by:
-
Arvind Yadav authored
acpi_device_id are not supposed to change at runtime. All functions working with acpi_device_id provided by <acpi/acpi_bus.h> work with const acpi_device_id. So mark the non-const structs as const. File size before: text data bss dec hex filename 15148 2640 8 17796 4584 drivers/staging/media/atomisp/i2c/mt9m114.o File size After adding 'const': text data bss dec hex filename 15244 2512 8 17764 4564 drivers/staging/media/atomisp/i2c/mt9m114.o Signed-off-by:
-
Arvind Yadav authored
acpi_device_id are not supposed to change at runtime. All functions working with acpi_device_id provided by <acpi/acpi_bus.h> work with const acpi_device_id. So mark the non-const structs as const. File size before: text data bss dec hex filename 20729 3264 0 23993 5db9 drivers/staging/media/atomisp/i2c/ov5693/ov5693.o File size After adding 'const': text data bss dec hex filename 20793 3200 0 23993 5db9 drivers/staging/media/atomisp/i2c/ov5693/ov5693.o Signed-off-by:
-
Arvind Yadav authored
acpi_device_id are not supposed to change at runtime. All functions working with acpi_device_id provided by <acpi/acpi_bus.h> work with const acpi_device_id. So mark the non-const structs as const. File size before: text data bss dec hex filename 14771 1880 0 16651 410b drivers/staging/media/atomisp/i2c/ov2722.o File size After adding 'const': text data bss dec hex filename 14835 1816 0 16651 410b drivers/staging/media/atomisp/i2c/ov2722.o Signed-off-by:
-
Arvind Yadav authored
acpi_device_id are not supposed to change at runtime. All functions working with acpi_device_id provided by <acpi/acpi_bus.h> work with const acpi_device_id. So mark the non-const structs as const. File size before: text data bss dec hex filename 10297 1888 0 12185 2f99 drivers/staging/media/atomisp/i2c/gc0310.o File size After adding 'const': text data bss dec hex filename 10361 1824 0 12185 2f99 drivers/staging/media/atomisp/i2c/gc0310.o Signed-off-by:
Alan Cox <alan@linux.intel.com> Signed-off-by:
-
Arvind Yadav authored
acpi_device_id are not supposed to change at runtime. All functions working with acpi_device_id provided by <acpi/acpi_bus.h> work with const acpi_device_id. So mark the non-const structs as const. File size before: text data bss dec hex filename 23804 8448 0 32252 7dfc drivers/staging/media/atomisp/i2c/ov8858.o File size After adding 'const': text data bss dec hex filename 23868 8384 0 32252 7dfc drivers/staging/media/atomisp/i2c/ov8858.o Signed-off-by:
-
Arvind Yadav authored
acpi_device_id are not supposed to change at runtime. All functions working with acpi_device_id provided by <acpi/acpi_bus.h> work with const acpi_device_id. So mark the non-const structs as const. File size before: text data bss dec hex filename 12466 3120 8 15594 3cea drivers/staging/media/atomisp/i2c/ov2680.o File size After adding 'const': text data bss dec hex filename 12530 3056 8 15594 3cea drivers/staging/media/atomisp/i2c/ov2680.o Signed-off-by:
-
Arvind Yadav authored
acpi_device_id are not supposed to change at runtime. All functions working with acpi_device_id provided by <acpi/acpi_bus.h> work with const acpi_device_id. So mark the non-const structs as const. File size before: text data bss dec hex filename 5347 1920 24 7291 1c7b drivers/staging/media/atomisp/i2c/lm3554.o File size After adding 'const': text data bss dec hex filename 5411 1856 24 7291 1c7b drivers/staging/media/atomisp/i2c/lm3554.o Signed-off-by:
-
Ivan Menshykov authored
Fix checkpath errors Signed-off-by:
Ivan Menshykov <ivan.menshykov@gmail.com> Signed-off-by:
-
Guillermo O. Freschi authored
Several local use structs were missing declarations. Added static qualifier to clean up Sparse warning. Signed-off-by:
Guillermo O. Freschi <kedrot@gmail.com> Signed-off-by:
-
