This changes the hash insertion routines to return an error instead of
calling panic() when HV refuses to insert a HPTE (the hypervisor call to
set up a hashtable PTE is H_ENTER). 

The error is now propagated upstream, and either bad_page_fault() is
called (kernel mode) or a SIGBUS signal is forced (user mode).  Some
other panic() cases are also turned into BUG_ON.

Overall, this should provide us with better debugging data if the
problem happens, and avoids errors from userland mapping /dev/mem and
trying to use forbidden IOs (XFree ?) to bring the whole kernel down.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

resource tree.

In contrast to the old "request_resource()", this allows
us to add a resource even when firmware (ACPI) has marked
part of it as being in use.

From: Roger Luethi <rl@hellgate.ch>

- remove Rhine model names (per Jeff's request)
- remove redundant calls to clear MII cmd
- fill some rhine_private fields earlier
Signed-off-by: Roger Luethi <rl@hellgate.ch>
Signed-off-by: Andrew Morton <akpm@osdl.org>

From: Roger Luethi <rl@hellgate.ch>

PHYs may come up isolated.  Make sure we can send data to them.  This code
section needs a clean-up, but I prefer to merge this fix in isolation.

Report and suggested fix by Tam, Ming Dat (Tommy).
Signed-off-by: Roger Luethi <rl@hellgate.ch>
Signed-off-by: Andrew Morton <akpm@osdl.org>

From: Roger Luethi <rl@hellgate.ch>

From: Arkadiusz Miskiewicz
Signed-off-by: Arkadiusz Miskiewicz <arekm@pld-linux.org>
Signed-off-by: Roger Luethi <rl@hellgate.ch>
Signed-off-by: Andrew Morton <akpm@osdl.org>

From: Kumar Gala <galak@somerset.sps.mot.com>

Fix usage of printk on the output of mac address.
Signed-off-by: Kumar Gala <kumar.gala@freescale.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>

From: Alexander Shatohin <ash@tsi.lv>
Signed-off-by: Andrew Morton <akpm@osdl.org>

From: Francois Romieu <romieu@fr.zoreil.com>

If the Rx buffer gets corrupted or the FIFO hangs in new interesting ways,
this code prevents the driver from looping in ksoftirqd context without
making any progress.
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>

From: Francois Romieu <romieu@fr.zoreil.com>

This patch allows to update the interrupt status register after an Rx
overflow or a Rx fifo error even when the Rx buffer contains no packet.
The update must be kept in the packet processing loop to prevent an Rx
error storm.  As an interesting behavior, the status of the interrupt
status register must not be read early.
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>

From: Francois Romieu <romieu@fr.zoreil.com>

Copy/paste abuse.
Signed-off-by: Andrew Morton <akpm@osdl.org>

From: Jesper Juhl <juhl-lkml@dif.dk>

To silence the warning in $subject, rename log2 to cycx_log2 in this file
to remove the clash, so there's no doubt that this file uses it's own
defined log2 function.
Signed-off-by: Jesper Juhl <juhl-lkml@dif.dk>
Signed-off-by: Andrew Morton <akpm@osdl.org>

From: Adrian Bunk <bunk@fs.tum.de>

drivers/net/hamradio/dmascc.c: In function `scc_isr':
drivers/net/hamradio/dmascc.c:250: sorry, unimplemented: inlining
failed in call to 'z8530_isr': function body not available
drivers/net/hamradio/dmascc.c:969: sorry, unimplemented: called from
here
drivers/net/hamradio/dmascc.c:250: sorry, unimplemented: inlining
failed in call to 'z8530_isr': function body not available
drivers/net/hamradio/dmascc.c:978: sorry, unimplemented: called from
here
Signed-off-by: Adrian Bunk <bunk@fs.tum.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>

From: Adrian Bunk <bunk@fs.tum.de>

drivers/net/sk98lin/skge.c: In function `skge_remove_one':
drivers/net/sk98lin/skge.c:5116: warning: implicit declaration of function `remove_proc_entry'
drivers/net/sk98lin/skge.c:5116: `pSkRootDir' undeclared (first use in this function)
drivers/net/sk98lin/skge.c:5116: (Each undeclared identifier is reported only once
drivers/net/sk98lin/skge.c:5116: for each function it appears in.)
drivers/net/sk98lin/skge.c: In function `skge_init':
drivers/net/sk98lin/skge.c:5188: `SK_Root_Dir_entry' undeclared (first use in this function)
Signed-off-by: Adrian Bunk <bunk@fs.tum.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>

From: Francois Romieu <romieu@fr.zoreil.com>

There is no guarantee that the event which gets passed is associated to a
via-velocity device, thus preventing to dereference dev->priv as if it
always was a struct velocity_info *.  The via-velocity devices are kept in
a module private list for comparison.
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>

From: Adrian Bunk <bunk@fs.tum.de>

drivers/net/ixgb/ixgb_main.c: In function `ixgb_up':
drivers/net/ixgb/ixgb_main.c:86: sorry, unimplemented: inlining failed
in call to 'ixgb_irq_enable': function body not available
drivers/net/ixgb/ixgb_main.c:234: sorry, unimplemented: called from here
Signed-off-by: Adrian Bunk <bunk@fs.tum.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>

From: Adrian Bunk <bunk@fs.tum.de>

  CC      drivers/net/tulip/dmfe.o
drivers/net/tulip/dmfe.c: In function `dmfe_rx_packet':
drivers/net/tulip/dmfe.c:323: sorry, unimplemented: inlining failed in
call to 'cal_CRC': function body not available
drivers/net/tulip/dmfe.c:936: sorry, unimplemented: called from here
make[3]: *** [drivers/net/tulip/dmfe.o] Error 1
Signed-off-by: Adrian Bunk <bunk@fs.tum.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>

From: Adrian Bunk <bunk@fs.tum.de>

  CC      drivers/net/rrunner.o
drivers/net/rrunner.c: In function `rr_timer':
drivers/net/rrunner.h:846: sorry, unimplemented: inlining failed in call
to 'rr_raz_tx': function body not available
drivers/net/rrunner.c:1155: sorry, unimplemented: called from here
drivers/net/rrunner.h:847: sorry, unimplemented: inlining failed in call
to 'rr_raz_rx': function body not available
drivers/net/rrunner.c:1156: sorry, unimplemented: called from here
make[2]: *** [drivers/net/rrunner.o] Error 1
Signed-off-by: Adrian Bunk <bunk@fs.tum.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>

From: Adrian Bunk <bunk@fs.tum.de>

  CC      drivers/net/hamachi.o
drivers/net/hamachi.c: In function `hamachi_interrupt':
drivers/net/hamachi.c:562: sorry, unimplemented: inlining failed in call
to 'hamachi_rx': function body not available
drivers/net/hamachi.c:1402: sorry, unimplemented: called from here
make[2]: *** [drivers/net/hamachi.o] Error 1
Signed-off-by: Adrian Bunk <bunk@fs.tum.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>

From: Adrian Bunk <bunk@fs.tum.de>

  CC      drivers/net/smc9194.o
drivers/net/smc9194.c: In function `smc_interrupt':
drivers/net/smc9194.c:278: sorry, unimplemented: inlining failed in call
to 'smc_rcv': function body not available
drivers/net/smc9194.c:1254: sorry, unimplemented: called from here
drivers/net/smc9194.c:283: sorry, unimplemented: inlining failed in call
to 'smc_tx': function body not available
drivers/net/smc9194.c:1258: sorry, unimplemented: called from here
make[2]: *** [drivers/net/smc9194.o] Error 1
Signed-off-by: Adrian Bunk <bunk@fs.tum.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>

From: Nick Orlov <bugfixer@list.ru>

e1000 fixes for gcc-3.4.1
Signed-off-by: Andrew Morton <akpm@osdl.org>

drivers/net/e1000/e1000_main.c: In function `e1000_up':
drivers/net/e1000/e1000_main.c:136: sorry, unimplemented: inlining failed
in call to 'e1000_irq_enable': function body not available
drivers/net/e1000/e1000_main.c:274: sorry, unimplemented: called from here
Signed-off-by: Andrew Morton <akpm@osdl.org>

From: Christoph Hellwig <hch@infradead.org>

sk98line tries to register a procfile with the interfacename of the struct
net_device.  The patch below (ontop of the previous one) makes it work
unless you change the interface name manually, but as Linux explicitly
allows that the interface is fundamentally broken and probably should just
go away.
Signed-off-by: Andrew Morton <akpm@osdl.org>

From: Adrian Bunk <bunk@fs.tum.de>
Signed-off-by: Adrian Bunk <bunk@fs.tum.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>

into ppc970.osdl.org:/home/torvalds/v2.6/linux

cc-version needs to use $(shell to get the gcc version.
Before if gave the following error when building the kernel:

/bin/sh: line 1: [: too many arguments

And all checks for gcc version were broken.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>

into mars.ravnborg.org:/home/sam/bk/kbuild

into mars.ravnborg.org:/home/sam/bk/kbuild

into ppc970.osdl.org:/home/torvalds/v2.6/linux

into ppc970.osdl.org:/home/torvalds/v2.6/linux

Forgot one command, GPCMD_SEND_CUE_SHEET is also ok for write open.
Signed-off-by: Jens Axboe <axboe@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

If tty_open() fails for a normal serial device, we end up doing cleanups
that should only happen for failed open of /dev/ptmx.  The results are
not pretty - devpts et.al.  end up very confused.  That's what gave
problems with ptmx.

This splits ptmx file_operations from the normal case and cleans up both
tty_open() and (new) ptmx_open().  Survived serious beating.

Update architectures for the free_area_init_node() API change.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

That conversion to nfs_fh_copy() is bogus since we're not copying into
an nfs_fh anyway. Just revert it.

The patch below replaces all occurences of two bouncing email addresses of
Alex deVries in the kernel with his current address.

It's already ACK'ed by Alex deVries.
Signed-off-by: Adrian Bunk <bunk@fs.tum.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Describe what the Intel cache descriptors actually mean in comments.  Taken
from 24151827.pdf.
Signed-off-by: Dave Jones <davej@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

The patch below fixes an interesting oddity we're seeing with fedora core
development (where we recently started using udev heavily); basically right
now filelock_init() is a module_init(), eg runs late.  However that breaks
down because there are earlier /sbin/hotplug callouts, which with udev, do
locking operations.  When that happens the kernel oopses because the slabs
for file locks aren't initialized yet.

Solution: initialize this way early.  It's only a kmem_cache_create after
all, so can happen early.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

This entry was removed during 2.5 development.
Signed-off-by: Olaf Hering <olh@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

This entry is long gone, even 2.4 doesnt have it anymore.
Signed-off-by: Olaf Hering <olh@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>