- 28 Mar, 2015 7 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull scheduler fix from Ingo Molnar: "A single sched/rt corner case fix for RLIMIT_RTIME correctness" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched: Fix RLIMIT_RTTIME when PI-boosting to RT
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf fix from Ingo Molnar: "A perf kernel side fix for a fuzzer triggered lockup" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf: Fix irq_work 'tail' recursion
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull locking fix from Ingo Molnar: "A module unload lockdep race fix" * 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: lockdep: Fix the module unload key range freeing logic
-
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linuxLinus Torvalds authored
Pull parsic fixes from Helge Deller: "One patch from Mikulas fixes a bug on parisc by artifically incrementing the counter in pmd_free when the kernel tries to free the preallocated pmd. Other than that we now prevent that syscalls gets added without incrementing __NR_Linux_syscalls and fix the initial pmd setup code if a default page size greater than 4k has been selected" * 'parisc-4.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Fix pmd code to depend on PT_NLEVELS value, not on CONFIG_64BIT parisc: mm: don't count preallocated pmds parisc: Add compile-time check when adding new syscalls
-
git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds authored
Pull kvm ppc bugfixes from Marcelo Tosatti. * git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: PPC: Book3S HV: Fix instruction emulation KVM: PPC: Book3S HV: Endian fix for accessing VPA yield count KVM: PPC: Book3S HV: Fix spinlock/mutex ordering issue in kvmppc_set_lpcr()
-
git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arcLinus Torvalds authored
Pull ARC fixes from Vineet Gupta: "We found some issues with signal handling taking down the system. I know its late, but these are important and all marked for stable. ARC signal handling related fixes uncovered during recent testing of NPTL tools" * tag 'arc-4.0-fixes-part-2' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: ARC: signal handling robustify ARC: SA_SIGINFO ucontext regs off-by-one
-
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-securityLinus Torvalds authored
Pull selinux bugfix from James Morris. Fix broken return value. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: selinux: fix sel_write_enforce broken return value
-
- 27 Mar, 2015 6 commits
-
-
git://www.linux-watchdog.org/linux-watchdogLinus Torvalds authored
Pull watchdog fixes from Wim Van Sebroeck: - mtk_wdt: signedness bug in mtk_wdt_start() - imgpdc: Fix NULL pointer dereference during probe and fix the default heartbeat * git://www.linux-watchdog.org/linux-watchdog: watchdog: imgpdc: Fix default heartbeat watchdog: imgpdc: Fix probe NULL pointer dereference watchdog: mtk_wdt: signedness bug in mtk_wdt_start()
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/soundLinus Torvalds authored
Pull sound fixes from Takashi Iwai: "Three trivial oneliner fixes for HD-audio. Two are device-specific quirks while one is a generic fix for recent Realtek codecs" * tag 'sound-4.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda - Add one more node in the EAPD supporting candidate list ALSA: hda_intel: apply the Seperate stream_tag for Sunrise Point ALSA: hda - Add dock support for Thinkpad T450s (17aa:5036)
-
-
James Hogan authored
The IMG PDC watchdog driver heartbeat module parameter has no default so it is initialised to zero. This results in the following warning during probe: imgpdc-wdt 2006000.wdt: Initial timeout out of range! setting max timeout The module parameter description implies that the default value should be PDC_WDT_DEF_TIMEOUT, which isn't yet used, so initialise it to that. Also tweak the heartbeat module parameter description for consistency. Fixes: 93937669 ("watchdog: ImgTec PDC Watchdog Timer Driver") Signed-off-by:
James Hogan <james.hogan@imgtec.com> Cc: Ezequiel Garcia <ezequiel.garcia@imgtec.com> Cc: Naidu Tellapati <Naidu.Tellapati@imgtec.com> Cc: Jude Abraham <Jude.Abraham@imgtec.com> Cc: linux-watchdog@vger.kernel.org Reviewed-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
Wim Van Sebroeck <wim@iguana.be>
-
James Hogan authored
The IMG PDC watchdog probe function calls pdc_wdt_stop() prior to watchdog_set_drvdata(), causing a NULL pointer dereference when pdc_wdt_stop() retrieves the struct pdc_wdt_dev pointer using watchdog_get_drvdata() and reads the register base address through it. Fix by moving the watchdog_set_drvdata() call earlier, to where various other pdc_wdt->wdt_dev fields are initialised. Fixes: 93937669 ("watchdog: ImgTec PDC Watchdog Timer Driver") Signed-off-by:
-
Dan Carpenter authored
"ret" should be signed for the error handling to work correctly. This doesn't matter much in real life since mtk_wdt_set_timeout() always succeeds. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by:
Matthias Brugger <matthias.bgg@gmail.com> Reviewed-by:
-
- 26 Mar, 2015 12 commits
-
-
git://people.freedesktop.org/~airlied/linuxLinus Torvalds authored
Pull drm refcounting fixes from Dave Airlie: "Here is the complete set of i915 bug/warn/refcounting fixes" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/i915: Fixup legacy plane->crtc link for initial fb config drm/i915: Fix atomic state when reusing the firmware fb drm/i915: Keep ring->active_list and ring->requests_list consistent drm/i915: Don't try to reference the fb in get_initial_plane_config() drm: Fixup racy refcounting in plane_force_disable
-
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dmLinus Torvalds authored
Pull device mapper fix from Mike Snitzer: "Fix DM core device cleanup regression -- due to a latent race that was exposed by the bdi changes that were introduced during the 4.0 merge" * tag 'dm-4.0-fix-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm: fix add_disk() NULL pointer due to race with free_dev()
-
Linus Torvalds authored
Merge tag 'linux-kselftest-4.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull kselftest fix from Shuah Khan. * tag 'linux-kselftest-4.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: selftests: Fix build failures when invoked from kselftest target
-
git://anongit.freedesktop.org/drm-intelDave Airlie authored
This should cover the final warnings in -rc5 with two more backports from our development branch (drm-intel-next-queued). They're the ones from Daniel and Damien, with references to the reports. This is on top of drm-fixes because of the dependency on the two earlier fixes not yet in Linus' tree. There's an additional regression fix from Chris. * tag 'drm-intel-fixes-2015-03-26' of git://anongit.freedesktop.org/drm-intel: drm/i915: Fixup legacy plane->crtc link for initial fb config drm/i915: Fix atomic state when reusing the firmware fb drm/i915: Keep ring->active_list and ring->requests_list consistent
-
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linuxLinus Torvalds authored
Pull s390 fixes from Martin Schwidefsky: "A couple of bug fixes for s390. The ftrace comile fix is quite large for a -rc6 release, but it would be nice to have it in 4.0" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/smp: reenable smt after resume s390/mm: limit STACK_RND_MASK for compat tasks s390/ftrace: fix compile error if CONFIG_KPROBES is disabled s390/cpum_sf: add diagnostic sampling event only if it is authorized
-
Daniel Vetter authored
This is a very similar bug in the load detect code fixed in commit 9128b040 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Tue Mar 3 17:31:21 2015 +0100 drm/i915: Fix modeset state confusion in the load detect code But this time around it was the initial fb code that forgot to update the plane->crtc pointer. Otherwise it's the exact same bug, with the exact same restrains (any set_config call/ioctl that doesn't disable the pipe papers over the bug for free, so fairly hard to hit in normal testing). So if you want the full explanation just go read that one over there - it's rather long ... Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Josh Boyer <jwboyer@fedoraproject.org> Cc: Jani Nikula <jani.nikula@linux.intel.com> Reported-and-tested-by:
Josh Boyer <jwboyer@fedoraproject.org> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> [Jani: backported to drm-intel-fixes for v4.0-rc] Reference: http://mid.gmane.org/CA+5PVA7ChbtJrknqws1qvZcbrg1CW2pQAFkSMURWWgyASRyGXg@mail.gmail.comSigned-off-by:
Jani Nikula <jani.nikula@intel.com>
-
Damien Lespiau authored
Right now, we get a warning when taking over the firmware fb: [drm:drm_atomic_plane_check] FB set but no CRTC with the following backtrace: [<ffffffffa010339d>] drm_atomic_check_only+0x35d/0x510 [drm] [<ffffffffa0103567>] drm_atomic_commit+0x17/0x60 [drm] [<ffffffffa00a6ccd>] drm_atomic_helper_plane_set_property+0x8d/0xd0 [drm_kms_helper] [<ffffffffa00f1fed>] drm_mode_plane_set_obj_prop+0x2d/0x90 [drm] [<ffffffffa00a8a1b>] restore_fbdev_mode+0x6b/0xf0 [drm_kms_helper] [<ffffffffa00aa969>] drm_fb_helper_restore_fbdev_mode_unlocked+0x29/0x80 [drm_kms_helper] [<ffffffffa00aa9e2>] drm_fb_helper_set_par+0x22/0x50 [drm_kms_helper] [<ffffffffa050a71a>] intel_fbdev_set_par+0x1a/0x60 [i915] [<ffffffff813ad444>] fbcon_init+0x4f4/0x580 That's because we update the plane state with the fb from the firmware, but we never associate the plane to that CRTC. We don't quite have the full DRM take over from HW state just yet, so fake enough of the plane atomic state to pass the checks. v2: Fix the state on which we set the CRTC in the case we're sharing the initial fb with another pipe. (Matt) Signed-off-by:Damien Lespiau <damien.lespiau@intel.com> Reviewed-by:
Matt Roper <matthew.d.roper@intel.com> Signed-off-by:
-
Hui Wang authored
We have a HP machine which use the codec node 0x17 connecting the internal speaker, and from the node capability, we saw the EAPD, if we don't set the EAPD on for this node, the internal speaker can't output any sound. Cc: <stable@vger.kernel.org> BugLink: https://bugs.launchpad.net/bugs/1436745Signed-off-by:
Hui Wang <hui.wang@canonical.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de>
-
Chris Wilson authored
If we retire requests last, we may use a later seqno and so clear the requests lists without clearing the active list, leading to confusion. Hence we should retire requests first for consistency with the early return. The order used to be important as the lifecycle for the object on the active list was determined by request->seqno. However, the requests themselves are now reference counted removing the constraint from the order of retirement. Fixes regression from commit 1b5a433a Author: John Harrison <John.C.Harrison@Intel.com> Date: Mon Nov 24 18:49:42 2014 +0000 drm/i915: Convert 'i915_seqno_passed' calls into 'i915_gem_request_completed ' and a WARNING: CPU: 0 PID: 1383 at drivers/gpu/drm/i915/i915_gem_evict.c:279 i915_gem_evict_vm+0x10c/0x140() WARN_ON(!list_empty(&vm->active_list)) Identified by updating WATCH_LISTS: [drm:i915_verify_lists] *ERROR* blitter ring: active list not empty, but no requests WARNING: CPU: 0 PID: 681 at drivers/gpu/drm/i915/i915_gem.c:2751 i915_gem_retire_requests_ring+0x149/0x230() WARN_ON(i915_verify_lists(ring->dev)) Note that this is only a problem in evict_vm where the following happens after a retire_request has cleaned out all requests, but not all active bo: - intel_ring_idle called from i915_gpu_idle notices that no requests are outstanding and immediately returns. - i915_gem_retire_requests_ring called from i915_gem_retire_requests also immediately returns when there's no request, still leaving the bo on the active list. - evict_vm hits the WARN_ON(!list_empty(&vm->active_list)) after evicting all active objects that there's still stuff left that shouldn't be there. Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: John Harrison <John.C.Harrison@Intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by:
-
Libin Yang authored
The total stream number of Sunrise Point's input and output stream exceeds 15, which will cause some streams do not work because of the overflow on SDxCTL.STRM field if using the legacy stream tag allocation method. This patch uses the new stream tag allocation method by add the flag AZX_DCAPS_SEPARATE_STREAM_TAG for Skylake platform. Signed-off-by:
Libin Yang <libin.yang@intel.com> Signed-off-by:
-
Vineet Gupta authored
A malicious signal handler / restorer can DOS the system by fudging the user regs saved on stack, causing weird things such as sigreturn returning to user mode PC but cpu state still being kernel mode.... Ensure that in sigreturn path status32 always has U bit; any other bogosity (gargbage PC etc) will be taken care of by normal user mode exceptions mechanisms. Reproducer signal handler: void handle_sig(int signo, siginfo_t *info, void *context) { ucontext_t *uc = context; struct user_regs_struct *regs = &(uc->uc_mcontext.regs); regs->scratch.status32 = 0; } Before the fix, kernel would go off to weeds like below: --------->8----------- [ARCLinux]$ ./signal-test Path: /signal-test CPU: 0 PID: 61 Comm: signal-test Not tainted 4.0.0-rc5+ #65 task: 8f177880 ti: 5ffe6000 task.ti: 8f15c000 [ECR ]: 0x00220200 => Invalid Write @ 0x00000010 by insn @ 0x00010698 [EFA ]: 0x00000010 [BLINK ]: 0x2007c1ee [ERET ]: 0x10698 [STAT32]: 0x00000000 : <-------- BTA: 0x00010680 SP: 0x5ffe7e48 FP: 0x00000000 LPS: 0x20003c6c LPE: 0x20003c70 LPC: 0x00000000 ... --------->8----------- Reported-by:Alexey Brodkin <abrodkin@synopsys.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Vineet Gupta <vgupta@synopsys.com>
-
Vineet Gupta authored
The regfile provided to SA_SIGINFO signal handler as ucontext was off by one due to pt_regs gutter cleanups in 2013. Before handling signal, user pt_regs are copied onto user_regs_struct and copied back later. Both structs are binary compatible. This was all fine until commit 2fa91904 (ARC: pt_regs update #2) which removed the empty stack slot at top of pt_regs (corresponding to first pad) and made the corresponding fixup in struct user_regs_struct (the pad in there was moved out of @scratch - not removed altogether as it is part of ptrace ABI) struct user_regs_struct { + long pad; struct { - long pad; long bta, lp_start, lp_end,.... } scratch; ... } This meant that now user_regs_struct was off by 1 reg w.r.t pt_regs and signal code needs to user_regs_struct.scratch to reflect it as pt_regs, which is what this commit does. This problem was hidden for 2 years, because both save/restore, despite using wrong location, were using the same location. Only an interim inspection (reproducer below) exposed the issue. void handle_segv(int signo, siginfo_t *info, void *context) { ucontext_t *uc = context; struct user_regs_struct *regs = &(uc->uc_mcontext.regs); printf("regs %x %x\n", <=== prints 7 8 (vs. 8 9) regs->scratch.r8, regs->scratch.r9); } int main() { struct sigaction sa; sa.sa_sigaction = handle_segv; sa.sa_flags = SA_SIGINFO; sigemptyset(&sa.sa_mask); sigaction(SIGSEGV, &sa, NULL); asm volatile( "mov r7, 7 \n" "mov r8, 8 \n" "mov r9, 9 \n" "mov r10, 10 \n" :::"r7","r8","r9","r10"); *((unsigned int*)0x10) = 0; } Fixes: 2fa91904 "ARC: pt_regs update #2: Remove unused gutter at start of pt_regs" CC: <stable@vger.kernel.org> Signed-off-by:
-
- 25 Mar, 2015 15 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/metagLinus Torvalds authored
Pull arch/metag fix from James Hogan: "Another metag architecture fix for v4.0 This is another single fix, for an include dependency problem when using ioremap_wc() from asm/io.h without also including asm/pgtable.h" * tag 'metag-fixes-v4.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/metag: metag: Fix ioremap_wc/ioremap_cached build errors
-
Linus Torvalds authored
Merge misc fixes from Andrew Morton: "15 fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: mm: numa: mark huge PTEs young when clearing NUMA hinting faults mm: numa: slow PTE scan rate if migration failures occur mm: numa: preserve PTE write permissions across a NUMA hinting fault mm: numa: group related processes based on VMA flags instead of page table flags hfsplus: fix B-tree corruption after insertion at position 0 MAINTAINERS: add Jan as DMI/SMBIOS support maintainer fs/affs/file.c: unlock/release page on error mm/page_alloc.c: call kernel_map_pages in unset_migrateype_isolate mm/slub: fix lockups on PREEMPT && !SMP kernels mm/memory hotplug: postpone the reset of obsolete pgdat MAINTAINERS: correct rtc armada38x pattern entry mm/pagewalk.c: prevent positive return value of walk_page_test() from being passed to callers mm: fix anon_vma->degree underflow in anon_vma endless growing prevention drivers/rtc/rtc-mrst: fix suspend/resume aoe: update aoe maintainer information
-
git://github.com/agraf/linux-2.6Marcelo Tosatti authored
Patch queue for 4.0 - 2015-03-25 A few bug fixes for Book3S HV KVM: - Fix spinlock ordering - Fix idle guests on LE hosts - Fix instruction emulation
-
Mel Gorman authored
Base PTEs are marked young when the NUMA hinting information is cleared but the same does not happen for huge pages which this patch addresses. Note that migrated pages are not marked young as the base page migration code does not assume that migrated pages have been referenced. This could be addressed but beyond the scope of this series which is aimed at Dave Chinners shrink workload that is unlikely to be affected by this issue. Signed-off-by:
Mel Gorman <mgorman@suse.de> Cc: Dave Chinner <david@fromorbit.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Aneesh Kumar <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Mel Gorman authored
Dave Chinner reported the following on https://lkml.org/lkml/2015/3/1/226 Across the board the 4.0-rc1 numbers are much slower, and the degradation is far worse when using the large memory footprint configs. Perf points straight at the cause - this is from 4.0-rc1 on the "-o bhash=101073" config: - 56.07% 56.07% [kernel] [k] default_send_IPI_mask_sequence_phys - default_send_IPI_mask_sequence_phys - 99.99% physflat_send_IPI_mask - 99.37% native_send_call_func_ipi smp_call_function_many - native_flush_tlb_others - 99.85% flush_tlb_page ptep_clear_flush try_to_unmap_one rmap_walk try_to_unmap migrate_pages migrate_misplaced_page - handle_mm_fault - 99.73% __do_page_fault trace_do_page_fault do_async_page_fault + async_page_fault 0.63% native_send_call_func_single_ipi generic_exec_single smp_call_function_single This is showing excessive migration activity even though excessive migrations are meant to get throttled. Normally, the scan rate is tuned on a per-task basis depending on the locality of faults. However, if migrations fail for any reason then the PTE scanner may scan faster if the faults continue to be remote. This means there is higher system CPU overhead and fault trapping at exactly the time we know that migrations cannot happen. This patch tracks when migration failures occur and slows the PTE scanner. Signed-off-by:
Dave Chinner <david@fromorbit.com> Tested-by:
-
Mel Gorman authored
Protecting a PTE to trap a NUMA hinting fault clears the writable bit and further faults are needed after trapping a NUMA hinting fault to set the writable bit again. This patch preserves the writable bit when trapping NUMA hinting faults. The impact is obvious from the number of minor faults trapped during the basis balancing benchmark and the system CPU usage; autonumabench 4.0.0-rc4 4.0.0-rc4 baseline preserve Time System-NUMA01 107.13 ( 0.00%) 103.13 ( 3.73%) Time System-NUMA01_THEADLOCAL 131.87 ( 0.00%) 83.30 ( 36.83%) Time System-NUMA02 8.95 ( 0.00%) 10.72 (-19.78%) Time System-NUMA02_SMT 4.57 ( 0.00%) 3.99 ( 12.69%) Time Elapsed-NUMA01 515.78 ( 0.00%) 517.26 ( -0.29%) Time Elapsed-NUMA01_THEADLOCAL 384.10 ( 0.00%) 384.31 ( -0.05%) Time Elapsed-NUMA02 48.86 ( 0.00%) 48.78 ( 0.16%) Time Elapsed-NUMA02_SMT 47.98 ( 0.00%) 48.12 ( -0.29%) 4.0.0-rc4 4.0.0-rc4 baseline preserve User 44383.95 43971.89 System 252.61 201.24 Elapsed 998.68 1000.94 Minor Faults 2597249 1981230 Major Faults 365 364 There is a similar drop in system CPU usage using Dave Chinner's xfsrepair workload 4.0.0-rc4 4.0.0-rc4 baseline preserve Amean real-xfsrepair 454.14 ( 0.00%) 442.36 ( 2.60%) Amean syst-xfsrepair 277.20 ( 0.00%) 204.68 ( 26.16%) The patch looks hacky but the alternatives looked worse. The tidest was to rewalk the page tables after a hinting fault but it was more complex than this approach and the performance was worse. It's not generally safe to just mark the page writable during the fault if it's a write fault as it may have been read-only for COW so that approach was discarded. Signed-off-by: -
Mel Gorman authored
These are three follow-on patches based on the xfsrepair workload Dave Chinner reported was problematic in 4.0-rc1 due to changes in page table management -- https://lkml.org/lkml/2015/3/1/226. Much of the problem was reduced by commit 53da3bc2 ("mm: fix up numa read-only thread grouping logic") and commit ba68bc01 ("mm: thp: Return the correct value for change_huge_pmd"). It was known that the performance in 3.19 was still better even if is far less safe. This series aims to restore the performance without compromising on safety. For the test of this mail, I'm comparing 3.19 against 4.0-rc4 and the three patches applied on top autonumabench 3.19.0 4.0.0-rc4 4.0.0-rc4 4.0.0-rc4 4.0.0-rc4 vanilla vanilla vmwrite-v5r8 preserve-v5r8 slowscan-v5r8 Time System-NUMA01 124.00 ( 0.00%) 161.86 (-30.53%) 107.13 ( 13.60%) 103.13 ( 16.83%) 145.01 (-16.94%) Time System-NUMA01_THEADLOCAL 115.54 ( 0.00%) 107.64 ( 6.84%) 131.87 (-14.13%) 83.30 ( 27.90%) 92.35 ( 20.07%) Time System-NUMA02 9.35 ( 0.00%) 10.44 (-11.66%) 8.95 ( 4.28%) 10.72 (-14.65%) 8.16 ( 12.73%) Time System-NUMA02_SMT 3.87 ( 0.00%) 4.63 (-19.64%) 4.57 (-18.09%) 3.99 ( -3.10%) 3.36 ( 13.18%) Time Elapsed-NUMA01 570.06 ( 0.00%) 567.82 ( 0.39%) 515.78 ( 9.52%) 517.26 ( 9.26%) 543.80 ( 4.61%) Time Elapsed-NUMA01_THEADLOCAL 393.69 ( 0.00%) 384.83 ( 2.25%) 384.10 ( 2.44%) 384.31 ( 2.38%) 380.73 ( 3.29%) Time Elapsed-NUMA02 49.09 ( 0.00%) 49.33 ( -0.49%) 48.86 ( 0.47%) 48.78 ( 0.63%) 50.94 ( -3.77%) Time Elapsed-NUMA02_SMT 47.51 ( 0.00%) 47.15 ( 0.76%) 47.98 ( -0.99%) 48.12 ( -1.28%) 49.56 ( -4.31%) 3.19.0 4.0.0-rc4 4.0.0-rc4 4.0.0-rc4 4.0.0-rc4 vanilla vanillavmwrite-v5r8preserve-v5r8slowscan-v5r8 User 46334.60 46391.94 44383.95 43971.89 44372.12 System 252.84 284.66 252.61 201.24 249.00 Elapsed 1062.14 1050.96 998.68 1000.94 1026.78 Overall the system CPU usage is comparable and the test is naturally a bit variable. The slowing of the scanner hurts numa01 but on this machine it is an adverse workload and patches that dramatically help it often hurt absolutely everything else. Due to patch 2, the fault activity is interesting 3.19.0 4.0.0-rc4 4.0.0-rc4 4.0.0-rc4 4.0.0-rc4 vanilla vanillavmwrite-v5r8preserve-v5r8slowscan-v5r8 Minor Faults 2097811 2656646 2597249 1981230 1636841 Major Faults 362 450 365 364 365 Note the impact preserving the write bit across protection updates and fault reduces faults. NUMA alloc hit 1229008 1217015 1191660 1178322 1199681 NUMA alloc miss 0 0 0 0 0 NUMA interleave hit 0 0 0 0 0 NUMA alloc local 1228514 1216317 1190871 1177448 1199021 NUMA base PTE updates 245706197 240041607 238195516 244704842 115012800 NUMA huge PMD updates 479530 468448 464868 477573 224487 NUMA page range updates 491225557 479886983 476207932 489222218 229950144 NUMA hint faults 659753 656503 641678 656926 294842 NUMA hint local faults 381604 373963 360478 337585 186249 NUMA hint local percent 57 56 56 51 63 NUMA pages migrated 5412140 6374899 6266530 5277468 5755096 AutoNUMA cost 5121% 5083% 4994% 5097% 2388% Here the impact of slowing the PTE scanner on migratrion failures is obvious as "NUMA base PTE updates" and "NUMA huge PMD updates" are massively reduced even though the headline performance is very similar. As xfsrepair was the reported workload here is the impact of the series on it. xfsrepair 3.19.0 4.0.0-rc4 4.0.0-rc4 4.0.0-rc4 4.0.0-rc4 vanilla vanilla vmwrite-v5r8 preserve-v5r8 slowscan-v5r8 Min real-fsmark 1183.29 ( 0.00%) 1165.73 ( 1.48%) 1152.78 ( 2.58%) 1153.64 ( 2.51%) 1177.62 ( 0.48%) Min syst-fsmark 4107.85 ( 0.00%) 4027.75 ( 1.95%) 3986.74 ( 2.95%) 3979.16 ( 3.13%) 4048.76 ( 1.44%) Min real-xfsrepair 441.51 ( 0.00%) 463.96 ( -5.08%) 449.50 ( -1.81%) 440.08 ( 0.32%) 439.87 ( 0.37%) Min syst-xfsrepair 195.76 ( 0.00%) 278.47 (-42.25%) 262.34 (-34.01%) 203.70 ( -4.06%) 143.64 ( 26.62%) Amean real-fsmark 1188.30 ( 0.00%) 1177.34 ( 0.92%) 1157.97 ( 2.55%) 1158.21 ( 2.53%) 1182.22 ( 0.51%) Amean syst-fsmark 4111.37 ( 0.00%) 4055.70 ( 1.35%) 3987.19 ( 3.02%) 3998.72 ( 2.74%) 4061.69 ( 1.21%) Amean real-xfsrepair 450.88 ( 0.00%) 468.32 ( -3.87%) 454.14 ( -0.72%) 442.36 ( 1.89%) 440.59 ( 2.28%) Amean syst-xfsrepair 199.66 ( 0.00%) 290.60 (-45.55%) 277.20 (-38.84%) 204.68 ( -2.51%) 150.55 ( 24.60%) Stddev real-fsmark 4.12 ( 0.00%) 10.82 (-162.29%) 4.14 ( -0.28%) 5.98 (-45.05%) 4.60 (-11.53%) Stddev syst-fsmark 2.63 ( 0.00%) 20.32 (-671.82%) 0.37 ( 85.89%) 16.47 (-525.59%) 15.05 (-471.79%) Stddev real-xfsrepair 6.87 ( 0.00%) 4.55 ( 33.75%) 3.46 ( 49.58%) 1.78 ( 74.12%) 0.52 ( 92.50%) Stddev syst-xfsrepair 3.02 ( 0.00%) 10.30 (-241.37%) 13.17 (-336.37%) 0.71 ( 76.63%) 5.00 (-65.61%) CoeffVar real-fsmark 0.35 ( 0.00%) 0.92 (-164.73%) 0.36 ( -2.91%) 0.52 (-48.82%) 0.39 (-12.10%) CoeffVar syst-fsmark 0.06 ( 0.00%) 0.50 (-682.41%) 0.01 ( 85.45%) 0.41 (-543.22%) 0.37 (-478.78%) CoeffVar real-xfsrepair 1.52 ( 0.00%) 0.97 ( 36.21%) 0.76 ( 49.94%) 0.40 ( 73.62%) 0.12 ( 92.33%) CoeffVar syst-xfsrepair 1.51 ( 0.00%) 3.54 (-134.54%) 4.75 (-214.31%) 0.34 ( 77.20%) 3.32 (-119.63%) Max real-fsmark 1193.39 ( 0.00%) 1191.77 ( 0.14%) 1162.90 ( 2.55%) 1166.66 ( 2.24%) 1188.50 ( 0.41%) Max syst-fsmark 4114.18 ( 0.00%) 4075.45 ( 0.94%) 3987.65 ( 3.08%) 4019.45 ( 2.30%) 4082.80 ( 0.76%) Max real-xfsrepair 457.80 ( 0.00%) 474.60 ( -3.67%) 457.82 ( -0.00%) 444.42 ( 2.92%) 441.03 ( 3.66%) Max syst-xfsrepair 203.11 ( 0.00%) 303.65 (-49.50%) 294.35 (-44.92%) 205.33 ( -1.09%) 155.28 ( 23.55%) The really relevant lines as syst-xfsrepair which is the system CPU usage when running xfsrepair. Note that on my machine the overhead was 45% higher on 4.0-rc4 which may be part of what Dave is seeing. Once we preserve the write bit across faults, it's only 2.51% higher on average. With the full series applied, system CPU usage is 24.6% lower on average. Again, the impact of preserving the write bit on minor faults is obvious and the impact of slowing scanning after migration failures is obvious on the PTE updates. Note also that the number of pages migrated is much reduced even though the headline performance is comparable. 3.19.0 4.0.0-rc4 4.0.0-rc4 4.0.0-rc4 4.0.0-rc4 vanilla vanillavmwrite-v5r8preserve-v5r8slowscan-v5r8 Minor Faults 153466827 254507978 249163829 153501373 105737890 Major Faults 610 702 690 649 724 NUMA base PTE updates 217735049 210756527 217729596 216937111 144344993 NUMA huge PMD updates 129294 85044 106921 127246 79887 NUMA pages migrated 21938995 29705270 28594162 22687324 16258075 3.19.0 4.0.0-rc4 4.0.0-rc4 4.0.0-rc4 4.0.0-rc4 vanilla vanillavmwrite-v5r8preserve-v5r8slowscan-v5r8 Mean sdb-avgqusz 13.47 2.54 2.55 2.47 2.49 Mean sdb-avgrqsz 202.32 140.22 139.50 139.02 138.12 Mean sdb-await 25.92 5.09 5.33 5.02 5.22 Mean sdb-r_await 4.71 0.19 0.83 0.51 0.11 Mean sdb-w_await 104.13 5.21 5.38 5.05 5.32 Mean sdb-svctm 0.59 0.13 0.14 0.13 0.14 Mean sdb-rrqm 0.16 0.00 0.00 0.00 0.00 Mean sdb-wrqm 3.59 1799.43 1826.84 1812.21 1785.67 Max sdb-avgqusz 111.06 12.13 14.05 11.66 15.60 Max sdb-avgrqsz 255.60 190.34 190.01 187.33 191.78 Max sdb-await 168.24 39.28 49.22 44.64 65.62 Max sdb-r_await 660.00 52.00 280.00 76.00 12.00 Max sdb-w_await 7804.00 39.28 49.22 44.64 65.62 Max sdb-svctm 4.00 2.82 2.86 1.98 2.84 Max sdb-rrqm 8.30 0.00 0.00 0.00 0.00 Max sdb-wrqm 34.20 5372.80 5278.60 5386.60 5546.15 FWIW, I also checked SPECjbb in different configurations but it's similar observations -- minor faults lower, PTE update activity lower and performance is roughly comparable against 3.19. This patch (of 3): Threads that share writable data within pages are grouped together as related tasks. This decision is based on whether the PTE is marked dirty which is subject to timing races between the PTE scanner update and when the application writes the page. If the page is file-backed, then background flushes and sync also affect placement. This is unpredictable behaviour which is impossible to reason about so this patch makes grouping decisions based on the VMA flags. Signed-off-by:
-
Sergei Antonov authored
Fix B-tree corruption when a new record is inserted at position 0 in the node in hfs_brec_insert(). In this case a hfs_brec_update_parent() is called to update the parent index node (if exists) and it is passed hfs_find_data with a search_key containing a newly inserted key instead of the key to be updated. This results in an inconsistent index node. The bug reproduces on my machine after an extents overflow record for the catalog file (CNID=4) is inserted into the extents overflow B-tree. Because of a low (reserved) value of CNID=4, it has to become the first record in the first leaf node. The resulting first leaf node is correct: ---------------------------------------------------- | key0.CNID=4 | key1.CNID=123 | key2.CNID=456, ... | ---------------------------------------------------- But the parent index key0 still contains the previous key CNID=123: ----------------------- | key0.CNID=123 | ... | ----------------------- A change in hfs_brec_insert() makes hfs_brec_update_parent() work correctly by preventing it from getting fd->record=-1 value from __hfs_brec_find(). Along the way, I removed duplicate code with unification of the if condition. The resulting code is equivalent to the original code because node is never 0. Also hfs_brec_update_parent() will now return an error after getting a negative fd->record value. However, the return value of hfs_brec_update_parent() is not checked anywhere in the file and I'm leaving it unchanged by this patch. brec.c lacks error checking after some other calls too, but this issue is of less importance than the one being fixed by this patch. Signed-off-by:
Sergei Antonov <saproj@gmail.com> Cc: Joe Perches <joe@perches.com> Reviewed-by:
Vyacheslav Dubeyko <slava@dubeyko.com> Acked-by:
Hin-Tak Leung <htl10@users.sourceforge.net> Cc: Anton Altaparmakov <aia21@cam.ac.uk> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Christoph Hellwig <hch@infradead.org> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Jean Delvare authored
I am familiar with these drivers and I care about them so let me add myself as their maintainer. Signed-off-by:
Jean Delvare <jdelvare@suse.de> Acked-by:
Matt Fleming <matt.fleming@intel.com> Signed-off-by:
-
Taesoo Kim authored
When affs_bread_ino() fails, correctly unlock the page and release the page cache with proper error value. All write_end() should unlock/release the page that was locked by write_beg(). Signed-off-by:
Taesoo Kim <tsgatesv@gmail.com> Cc: Fabian Frederick <fabf@skynet.be> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Jan Kara <jack@suse.cz> Signed-off-by:
-
Laura Abbott authored
Commit 3c605096 ("mm/page_alloc: restrict max order of merging on isolated pageblock") changed the logic of unset_migratetype_isolate to check the buddy allocator and explicitly call __free_pages to merge. The page that is being freed in this path never had prep_new_page called so set_page_refcounted is called explicitly but there is no call to kernel_map_pages. With the default kernel_map_pages this is mostly harmless but if kernel_map_pages does any manipulation of the page tables (unmapping or setting pages to read only) this may trigger a fault: alloc_contig_range test_pages_isolated(ceb00, ced00) failed Unable to handle kernel paging request at virtual address ffffffc0cec00000 pgd = ffffffc045fc4000 [ffffffc0cec00000] *pgd=0000000000000000 Internal error: Oops: 9600004f [#1] PREEMPT SMP Modules linked in: exfatfs CPU: 1 PID: 23237 Comm: TimedEventQueue Not tainted 3.10.49-gc72ad36-dirty #1 task: ffffffc03de52100 ti: ffffffc015388000 task.ti: ffffffc015388000 PC is at memset+0xc8/0x1c0 LR is at kernel_map_pages+0x1ec/0x244 Fix this by calling kernel_map_pages to ensure the page is set in the page table properly Fixes: 3c605096 ("mm/page_alloc: restrict max order of merging on isolated pageblock") Signed-off-by:
Laura Abbott <lauraa@codeaurora.org> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Mel Gorman <mgorman@suse.de> Acked-by:
Rik van Riel <riel@redhat.com> Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Cc: Xishi Qiu <qiuxishi@huawei.com> Cc: Vladimir Davydov <vdavydov@parallels.com> Acked-by:
Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Gioh Kim <gioh.kim@lge.com> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Mark Rutland authored
Commit 9aabf810 ("mm/slub: optimize alloc/free fastpath by removing preemption on/off") introduced an occasional hang for kernels built with CONFIG_PREEMPT && !CONFIG_SMP. The problem is the following loop the patch introduced to slab_alloc_node and slab_free: do { tid = this_cpu_read(s->cpu_slab->tid); c = raw_cpu_ptr(s->cpu_slab); } while (IS_ENABLED(CONFIG_PREEMPT) && unlikely(tid != c->tid)); GCC 4.9 has been observed to hoist the load of c and c->tid above the loop for !SMP kernels (as in this case raw_cpu_ptr(x) is compile-time constant and does not force a reload). On arm64 the generated assembly looks like: ldr x4, [x0,#8] loop: ldr x1, [x0,#8] cmp x1, x4 b.ne loop If the thread is preempted between the load of c->tid (into x1) and tid (into x4), and an allocation or free occurs in another thread (bumping the cpu_slab's tid), the thread will be stuck in the loop until s->cpu_slab->tid wraps, which may be forever in the absence of allocations/frees on the same CPU. This patch changes the loop condition to access c->tid with READ_ONCE. This ensures that the value is reloaded even when the compiler would otherwise assume it could cache the value, and also ensures that the load will not be torn. Signed-off-by:
Mark Rutland <mark.rutland@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Acked-by:
Christoph Lameter <cl@linux.com> Cc: David Rientjes <rientjes@google.com> Cc: Jesper Dangaard Brouer <brouer@redhat.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: Steve Capper <steve.capper@linaro.org> Signed-off-by:
-
Gu Zheng authored
Qiu Xishi reported the following BUG when testing hot-add/hot-remove node under stress condition: BUG: unable to handle kernel paging request at 0000000000025f60 IP: next_online_pgdat+0x1/0x50 PGD 0 Oops: 0000 [#1] SMP ACPI: Device does not support D3cold Modules linked in: fuse nls_iso8859_1 nls_cp437 vfat fat loop dm_mod coretemp mperf crc32c_intel ghash_clmulni_intel aesni_intel ablk_helper cryptd lrw gf128mul glue_helper aes_x86_64 pcspkr microcode igb dca i2c_algo_bit ipv6 megaraid_sas iTCO_wdt i2c_i801 i2c_core iTCO_vendor_support tg3 sg hwmon ptp lpc_ich pps_core mfd_core acpi_pad rtc_cmos button ext3 jbd mbcache sd_mod crc_t10dif scsi_dh_alua scsi_dh_rdac scsi_dh_hp_sw scsi_dh_emc scsi_dh ahci libahci libata scsi_mod [last unloaded: rasf] CPU: 23 PID: 238 Comm: kworker/23:1 Tainted: G O 3.10.15-5885-euler0302 #1 Hardware name: HUAWEI TECHNOLOGIES CO.,LTD. Huawei N1/Huawei N1, BIOS V100R001 03/02/2015 Workqueue: events vmstat_update task: ffffa800d32c0000 ti: ffffa800d32ae000 task.ti: ffffa800d32ae000 RIP: 0010: next_online_pgdat+0x1/0x50 RSP: 0018:ffffa800d32afce8 EFLAGS: 00010286 RAX: 0000000000001440 RBX: ffffffff81da53b8 RCX: 0000000000000082 RDX: 0000000000000000 RSI: 0000000000000082 RDI: 0000000000000000 RBP: ffffa800d32afd28 R08: ffffffff81c93bfc R09: ffffffff81cbdc96 R10: 00000000000040ec R11: 00000000000000a0 R12: ffffa800fffb3440 R13: ffffa800d32afd38 R14: 0000000000000017 R15: ffffa800e6616800 FS: 0000000000000000(0000) GS:ffffa800e6600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000025f60 CR3: 0000000001a0b000 CR4: 00000000001407e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: refresh_cpu_vm_stats+0xd0/0x140 vmstat_update+0x11/0x50 process_one_work+0x194/0x3d0 worker_thread+0x12b/0x410 kthread+0xc6/0xd0 ret_from_fork+0x7c/0xb0 The cause is the "memset(pgdat, 0, sizeof(*pgdat))" at the end of try_offline_node, which will reset all the content of pgdat to 0, as the pgdat is accessed lock-free, so that the users still using the pgdat will panic, such as the vmstat_update routine. process A: offline node XX: vmstat_updat() refresh_cpu_vm_stats() for_each_populated_zone() find online node XX cond_resched() offline cpu and memory, then try_offline_node() node_set_offline(nid), and memset(pgdat, 0, sizeof(*pgdat)) zone = next_zone(zone) pg_data_t *pgdat = zone->zone_pgdat; // here pgdat is NULL now next_online_pgdat(pgdat) next_online_node(pgdat->node_id); // NULL pointer access So the solution here is postponing the reset of obsolete pgdat from try_offline_node() to hotadd_new_pgdat(), and just resetting pgdat->nr_zones and pgdat->classzone_idx to be 0 rather than the memset 0 to avoid breaking pointer information in pgdat. Signed-off-by:Gu Zheng <guz.fnst@cn.fujitsu.com> Reported-by:
Xishi Qiu <qiuxishi@huawei.com> Suggested-by:
KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: David Rientjes <rientjes@google.com> Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: Taku Izumi <izumi.taku@jp.fujitsu.com> Cc: Tang Chen <tangchen@cn.fujitsu.com> Cc: Xie XiuQi <xiexiuqi@huawei.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Joe Perches authored
Commit c6a95dbe ("MAINTAINERS: add the RTC driver for the Armada38x") typoed the pattern, fix it. Signed-off-by:
Joe Perches <joe@perches.com> Acked-by:
Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by:
-
Naoya Horiguchi authored
walk_page_test() is purely pagewalk's internal stuff, and its positive return values are not intended to be passed to the callers of pagewalk. However, in the current code if the last vma in the do-while loop in walk_page_range() happens to return a positive value, it leaks outside walk_page_range(). So the user visible effect is invalid/unexpected return value (according to the reporter, mbind() causes it.) This patch fixes it simply by reinitializing the return value after checked. Another exposed interface, walk_page_vma(), already returns 0 for such cases so no problem. Fixes: fafaa426 ("pagewalk: improve vma handling") Signed-off-by:
Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Signed-off-by:
Kazutomo Yoshii <kazutomo.yoshii@gmail.com> Reported-by:
David Rientjes <rientjes@google.com> Signed-off-by:
-
