- 19 Dec, 2017 7 commits
-
-
Sebastian Reichel authored
The wrappers have been removed in commit 5a35876e (drm: omapdrm: Remove manual update display support) and will not be reintroduced, since the normal sys functions properly call the dirty callback. Signed-off-by:
Sebastian Reichel <sebastian.reichel@collabora.co.uk> Acked-by:
Pavel Machek <pavel@ucw.cz> Signed-off-by:
Tomi Valkeinen <tomi.valkeinen@ti.com>
-
Sebastian Reichel authored
Remove driver (un)register API defines. They do not even exist anymore. Signed-off-by:
-
Peter Ujfalusi authored
If we have memory bandwidth limit configured, reject the modes which would require more bandwidth than the limit if it is used with one full resolution plane (most common use case). This filtering is not providing full protection as it is possible that application would pick smaller crtc resolution with high resolution planes and down scaling, or can enable more smaller planes where the sum of their bandwidth need would be higher than the limit. This patch only allows us to filter out modes which would need more bandwidth if they were used with one full screen plane. Signed-off-by:
Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by:
-
Peter Ujfalusi authored
The get_memory_bandwidth_limit() in dispc_ops can be used to query the memory bandwidth limit of dispc by upper layers. Signed-off-by:
-
Peter Ujfalusi authored
max-memory-bandwidth can be used to specify the maximum bandwidth dispc can use when reading display data from main memory. In some SoC (am437x for example) we have memory bandwidth limitation which causes underflow in the display subsystem. Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
H. Nikolaus Schaller authored
to make it easier to keep in sync with the OF device table. Signed-off-by:
H. Nikolaus Schaller <hns@goldelico.com> Signed-off-by:
-
H. Nikolaus Schaller authored
The vendor name was "toppoly" but other panels and the vendor list have defined it as "tpo". So let's fix it in driver and bindings. We keep the old definition in parallel to stay compatible with potential older DTB setup. Signed-off-by:
-
- 18 Dec, 2017 1 commit
-
-
git://anongit.freedesktop.org/drm/drm-miscDave Airlie authored
drm-misc-next for 4.16: Cross-subsystem Changes: - Documentation for amlogic dt dt-bindings Core Changes: - Update edid-derived drm_display_info fields at edid property set Driver Changes: - A bunch of clean up from Noralf, including the last patches to reduce fbdev emulation footprint. * tag 'drm-misc-next-2017-12-14' of git://anongit.freedesktop.org/drm/drm-misc: (30 commits) drm/atomic-helper: Make zpos property kerneldoc less misleading drm: Update edid-derived drm_display_info fields at edid property set [v2] MAINTAINERS: Remove Jani as drm-misc co-maintainer drm/tinydrm: Use drm_fb_cma_fbdev_init_with_funcs/fini() drm/arm/mali: Use drm_fb_cma_fbdev_init/fini() drm/zte: Use drm_fb_cma_fbdev_init/fini() drm/vc4: Use drm_fb_cma_fbdev_init/fini() drm/tve200: Use drm_fb_cma_fbdev_init/fini() drm/tilcdc: Use drm_fb_cma_fbdev_init/fini() drm/sun4i: Use drm_fb_cma_fbdev_init/fini() drm/stm: Use drm_fb_cma_fbdev_init/fini() drm/sti: Use drm_fb_cma_fbdev_init/fini() drm/pl111: Use drm_fb_cma_fbdev_init/fini() drm/imx: Use drm_fb_cma_fbdev_init/fini() drm/atmel-hlcdc: Use drm_fb_cma_fbdev_init/fini() drm/cma-helper: Add drm_fb_cma_fbdev_init/fini() drm/gem-fb-helper: drm_gem_fbdev_fb_create() make funcs optional drm/tegra: Use drm_fb_helper_lastclose() and _poll_changed() drm/rockchip: Use drm_fb_helper_lastclose() and _poll_changed() drm/omap: Use drm_fb_helper_lastclose() and _poll_changed() ...
-
- 14 Dec, 2017 1 commit
-
-
Thierry Reding authored
kerneldoc for drm_plane_create_zpos_property() says that the DRM core will automatically calculate the normalized zpos values, but it doesn't actually do that anymore since commit 38d868e4 ("drm: Don't force all planes to be added to the state due to zpos"). Instead, drivers are supposed to explicitly call the drm_atomic_normalize_zpos() function. Change the kerneldoc comment to reflect that. v2: reference the commit that introduced the kerneldoc unclarity Reviewed-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171120150959.26913-1-thierry.reding@gmail.com
-
- 13 Dec, 2017 2 commits
-
-
Keith Packard authored
There are a set of values in the drm_display_info structure for each connector which hold information derived from EDID. These are computed in drm_add_display_info. Before this patch, that was only called in drm_add_edid_modes. This meant that they were only set when EDID was present and never reset when EDID was not, as happened when the display was disconnected. One of these fields, non_desktop, is used from drm_mode_connector_update_edid_property, the function responsible for assigning the new edid value to the application-visible property. Various drivers call these two functions (drm_add_edid_modes and drm_mode_connector_update_edid_property) in different orders. This means that even when EDID is present, the drm_display_info fields may not have been computed at the time that drm_mode_connector_update_edid_property used the non_desktop value to set the non_desktop property. I've added a public function (drm_reset_display_info) that resets the drm_display_info field values to default values and then made the drm_add_display_info function public. These two functions are now called directly from drm_mode_connector_update_edid_property so that the drm_display_info fields are always computed from the current EDID information before being used in that function. This means that the drm_display_info values are often computed twice, once when the EDID property it set and a second time when EDID is used to compute modes for the device. The alternative would be to uniformly ensure that the values were computed once before being used, which would require that all drivers reliably invoke the two paths in the same order. The computation is inexpensive enough that it seems more maintainable in the long term to simply compute them in both paths. The API to drm_add_display_info has been changed so that it no longer takes the set of edid-based quirks as a parameter. Rather, it now computes those quirks itself and returns them for further use by drm_add_edid_modes. This patch also includes a number of 'const' additions caused by drm_mode_connector_update_edid_property taking a 'const struct edid *' parameter and wanting to pass that along to drm_add_display_info. v2: after review by Daniel Vetter <daniel.vetter@ffwll.ch> Removed EXPORT_SYMBOL_GPL for drm_reset_display_info and drm_add_display_info. Added FIXME in drm_mode_connector_update_edid_property about potentially merging that with drm_add_edid_modes to avoid the need for two driver calls. Signed-off-by:
Keith Packard <keithp@keithp.com> Reviewed-by:
-
Jani Nikula authored
I'm juggling too many things, and drm-misc maintenance is one that I keep dropping on the floor. Admit reality and remove myself as maintainer. This still leaves us with a nice team of three who are actually doing the drm-misc work, while I focus on drm-intel. Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Gustavo Padovan <gustavo@padovan.org> Cc: Sean Paul <seanpaul@chromium.org> Cc: Dave Airlie <airlied@redhat.com> Acked-by:
Sean Paul <seanpaul@chromium.org> Acked-by:
Gustavo Padovan <gustavo.padovan@collabora.com> Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171123121308.12818-1-jani.nikula@intel.com
-
- 10 Dec, 2017 1 commit
-
-
Noralf Trønnes authored
Use drm_fb_cma_fbdev_init_with_funcs() and drm_fb_cma_fbdev_fini() which relies on the fact that drm_device holds a pointer to the drm_fb_helper structure. This means that the driver doesn't have to keep track of that. Also use the drm_fb_helper functions directly. Remove todo entry. Cc: David Lechner <david@lechnology.com> Signed-off-by:
Noralf Trønnes <noralf@tronnes.org> Acked-by:
David Lechner <david@lechnology.com> Acked-by:
David Lechner <david@lechnolgy.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171208193743.34450-11-noralf@tronnes.org
-
- 08 Dec, 2017 27 commits
-
-
Noralf Trønnes authored
Use drm_fb_cma_fbdev_init() and drm_fb_cma_fbdev_fini() which relies on the fact that drm_device holds a pointer to the drm_fb_helper structure. This means that the driver doesn't have to keep track of that. Also use the drm_fb_helper functions directly. Cc: Liviu Dudau <liviu.dudau@arm.com> Cc: Brian Starkey <brian.starkey@arm.com> Signed-off-by:
Liviu Dudau <liviu.dudau@arm.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171115142001.45358-20-noralf@tronnes.org
-
Noralf Trønnes authored
Use drm_fb_cma_fbdev_init() and drm_fb_cma_fbdev_fini() which relies on the fact that drm_device holds a pointer to the drm_fb_helper structure. This means that the driver doesn't have to keep track of that. Also use the drm_fb_helper functions directly. Cc: Shawn Guo <shawnguo@kernel.org> Signed-off-by:
Shawn Guo <shawnguo@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20171115142001.45358-19-noralf@tronnes.org
-
Noralf Trønnes authored
Use drm_fb_cma_fbdev_init() and drm_fb_cma_fbdev_fini() which relies on the fact that drm_device holds a pointer to the drm_fb_helper structure. This means that the driver doesn't have to keep track of that. Also use the drm_fb_helper functions directly. Cc: Eric Anholt <eric@anholt.net> Signed-off-by:
Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/20171115142001.45358-18-noralf@tronnes.org
-
Noralf Trønnes authored
Use drm_fb_cma_fbdev_init() and drm_fb_cma_fbdev_fini() which relies on the fact that drm_device holds a pointer to the drm_fb_helper structure. This means that the driver doesn't have to keep track of that. Also use the drm_fb_helper functions directly. Cc: Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20171115142001.45358-17-noralf@tronnes.org
-
Noralf Trønnes authored
Use drm_fb_cma_fbdev_init() and drm_fb_cma_fbdev_fini() which relies on the fact that drm_device holds a pointer to the drm_fb_helper structure. This means that the driver doesn't have to keep track of that. Also use the drm_fb_helper functions directly. Cc: Jyri Sarha <jsarha@ti.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by:
Jyri Sarha <jsarha@ti.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171115142001.45358-16-noralf@tronnes.org
-
Noralf Trønnes authored
Use drm_fb_cma_fbdev_init() and drm_fb_cma_fbdev_fini() which relies on the fact that drm_device holds a pointer to the drm_fb_helper structure. This means that the driver doesn't have to keep track of that. Also use the drm_fb_helper functions directly. Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by:
Maxime Ripard <maxime.ripard@free-electrons.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171115142001.45358-15-noralf@tronnes.org
-
Noralf Trønnes authored
Use drm_fb_cma_fbdev_init() and drm_fb_cma_fbdev_fini() which relies on the fact that drm_device holds a pointer to the drm_fb_helper structure. This means that the driver doesn't have to keep track of that. Also use the drm_fb_helper functions directly. Remove duplicate ldev assignment. Cc: Yannick Fertre <yannick.fertre@st.com> Cc: Philippe Cornu <philippe.cornu@st.com> Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org> Cc: Vincent Abriou <vincent.abriou@st.com> Signed-off-by:
Philippe Cornu <philippe.cornu@st.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171115142001.45358-14-noralf@tronnes.org
-
Noralf Trønnes authored
Use drm_fb_cma_fbdev_init() and drm_fb_cma_fbdev_fini() which relies on the fact that drm_device holds a pointer to the drm_fb_helper structure. This means that the driver doesn't have to keep track of that. Also use the drm_fb_helper functions directly. Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org> Cc: Vincent Abriou <vincent.abriou@st.com> Signed-off-by:
Benjamin Gaignard <benjamin.gaignard@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20171115142001.45358-13-noralf@tronnes.org
-
Noralf Trønnes authored
Use drm_fb_cma_fbdev_init() and drm_fb_cma_fbdev_fini() which relies on the fact that drm_device holds a pointer to the drm_fb_helper structure. This means that the driver doesn't have to keep track of that. Also use the drm_fb_helper functions directly. Cc: Eric Anholt <eric@anholt.net> Signed-off-by:
-
Noralf Trønnes authored
Use drm_fb_cma_fbdev_init() and drm_fb_cma_fbdev_fini() which relies on the fact that drm_device holds a pointer to the drm_fb_helper structure. This means that the driver doesn't have to keep track of that. Also use the drm_fb_helper functions directly. Cc: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by:
Philipp Zabel <p.zabel@pengutronix.de> Link: https://patchwork.freedesktop.org/patch/msgid/20171115142001.45358-8-noralf@tronnes.org
-
Noralf Trønnes authored
Use drm_fb_cma_fbdev_init() and drm_fb_cma_fbdev_fini() which relies on the fact that drm_device holds a pointer to the drm_fb_helper structure. This means that the driver doesn't have to keep track of that. Also use the drm_fb_helper functions directly. Cc: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by:
Boris Brezillon <boris.brezillon@free-electrons.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171115142001.45358-6-noralf@tronnes.org
-
Noralf Trønnes authored
Add functions drm_fb_cma_fbdev_init(), drm_fb_cma_fbdev_fini() and drm_fb_cma_fbdev_init_with_funcs(). These functions relies on the fact that the drm_fb_helper struct is stored in dev->drm_fb_helper_private so drivers don't need to store it. Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Noralf Trønnes authored
Make the drm_framebuffer_funcs argument optional for drivers that don't need to set the dirty callback. Signed-off-by:
-
Noralf Trønnes authored
This driver can use drm_fb_helper_lastclose() as its .lastclose callback. It can also use drm_fb_helper_output_poll_changed() as its .output_poll_changed callback. Cc: Thierry Reding <thierry.reding@gmail.com> Signed-off-by:
-
Noralf Trønnes authored
This driver can use drm_fb_helper_lastclose() as its .lastclose callback. It can also use drm_fb_helper_output_poll_changed() as its .output_poll_changed callback. Cc: Mark Yao <mark.yao@rock-chips.com> Signed-off-by:
-
Noralf Trønnes authored
This driver can use drm_fb_helper_lastclose() as its .lastclose callback. It can also use drm_fb_helper_output_poll_changed() as its .output_poll_changed callback. Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by:
-
Noralf Trønnes authored
This driver can use drm_fb_helper_output_poll_changed() instead of its own nouveau_fbcon_output_poll_changed(). Cc: Ben Skeggs <bskeggs@redhat.com> Signed-off-by:
-
Noralf Trønnes authored
This driver can use drm_fb_helper_lastclose() as its .lastclose callback. It can also use drm_fb_helper_output_poll_changed() as its .output_poll_changed callback. Cc: Rob Clark <robdclark@gmail.com> Signed-off-by:
-
Noralf Trønnes authored
This driver can use drm_fb_helper_lastclose() as its .lastclose callback. It can also use drm_fb_helper_output_poll_changed() as its .output_poll_changed callback. Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Signed-off-by:
-
Noralf Trønnes authored
This driver can use drm_fb_helper_lastclose() as its .lastclose callback. It can also use drm_fb_helper_output_poll_changed() as its .output_poll_changed callback. Cc: Inki Dae <inki.dae@samsung.com> Cc: Joonyoung Shim <jy0922.shim@samsung.com> Cc: Seung-Woo Kim <sw0312.kim@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by:
Inki Dae <inki.dae@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171205182504.41923-5-noralf@tronnes.org
-
Noralf Trønnes authored
This driver can use drm_fb_helper_lastclose() as its .lastclose callback. It can also use drm_fb_helper_output_poll_changed() as its .output_poll_changed callback. Cc: Russell King <linux@armlinux.org.uk> Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk> Acked-by:
-
Neil Armstrong authored
The VPU init misses these configurations values. Signed-off-by:
Neil Armstrong <narmstrong@baylibre.com> Acked-by:
Chris Wilson <chris@chris-wilson.co.uk> Tested-by:
Jerome Brunet <jbrunet@baylibre.com> Reviewed-by:
-
Neil Armstrong authored
On reference boards and derivatives, the HDMI Logic is powered by an external 5V regulator. This regulator was set by the Vendor U-Boot, add optional support for it. Signed-off-by:
-
Neil Armstrong authored
On reference boards and derivatives, the HDMI Logic is powered by an external 5V regulator. This regulator was set by the Vendor U-Boot, add optional support for it. Acked-by:
-
Neil Armstrong authored
The Video Processing Unit power domain was setup by the Vendor U-Boot, add support for an optional Power Domain phandle to setup it from the kernel. Acked-by:
-
Ray Strode authored
QXL associates mouse state with its primary plane. Destroying a primary plane and putting a new one in place has the side effect of destroying the cursor as well. This commit changes the driver to reapply the cursor any time a new primary is created. It achieves this by keeping a reference to the cursor bo on the qxl_crtc struct. This fix is very similar to commit 4532b241 ("drm/qxl: reapply cursor after SetCrtc calls") which got implicitly reverted as part of implementing the atomic modeset feature. Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Dave Airlie <airlied@redhat.com> Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1512097 Fixes: 1277eed5 ("drm: qxl: Atomic phase 1: convert cursor to universal plane") Cc: stable@vger.kernel.org Signed-off-by:
Ray Strode <rstrode@redhat.com> Signed-off-by:
Dave Airlie <airlied@redhat.com>
-
Ray Strode authored
qxl_cursor_atomic_update allocs a bo for the cursor that it never frees up at the end of the function. This commit fixes that. Signed-off-by:
-
- 07 Dec, 2017 1 commit
-
-
git://anongit.freedesktop.org/drm/drm-intelDave Airlie authored
[airlied: fix conflict in intel_dsi.c] drm-intel-next-2017-12-01: - Init clock gate fix (Ville) - Execlists event handling corrections (Chris, Michel) - Improvements on GPU Cache invalidation and context switch (Chris) - More perf OA changes (Lionel) - More selftests improvements and fixes (Chris, Matthew) - Clean-up on modules parameters (Chris) - Clean-up around old ringbuffer submission and hw semaphore on old platforms (Chris) - More Cannonlake stabilization effort (David, James) - Display planes clean-up and improvements (Ville) - New PMU interface for perf queries... (Tvrtko) - ... and other subsequent PMU changes and fixes (Tvrtko, Chris) - Remove success dmesg noise from rotation (Chris) - New DMC for Kabylake (Anusha) - Fixes around atomic commits (Daniel) - GuC updates and fixes (Sagar, Michal, Chris) - Couple gmbus/i2c fixes (Ville) - Use exponential backoff for all our wait_for() (Chris) - Fixes for i915/fbdev (Chris) - Backlight fixes (Arnd) - Updates on shrinker (Chris) - Make Hotplug enable more robuts (Chris) - Disable huge pages (TPH) on lack of a needed workaround (Joonas) - New GuC images for SKL, KBL, BXT (Sagar) - Add HW Workaround for Geminilake performance (Valtteri) - Fixes for PPS timings (Imre) - More IPS fixes (Maarten) - Many fixes for Display Port on gen2-gen4 (Ville) - Retry GPU reset making the recover from hang more robust (Chris) * tag 'drm-intel-next-2017-12-01' of git://anongit.freedesktop.org/drm/drm-intel: (101 commits) drm/i915: Update DRIVER_DATE to 20171201 drm/i915/cnl: Mask previous DDI - PLL mapping drm/i915: Remove unsafe i915.enable_rc6 drm/i915: Sleep and retry a GPU reset if at first we don't succeed drm/i915: Interlaced DP output doesn't work on VLV/CHV drm/i915: Pass crtc state to intel_pipe_{enable,disable}() drm/i915: Wait for pipe to start on i830 as well drm/i915: Fix vblank timestamp/frame counter jumps on gen2 drm/i915: Fix deadlock in i830_disable_pipe() drm/i915: Fix has_audio readout for DDI A drm/i915: Don't add the "force audio" property to DP connectors that don't support audio drm/i915: Disable DP audio for g4x drm/i915/selftests: Wake the device before executing requests on the GPU drm/i915: Set fake_vma.size as well as fake_vma.node.size for capture drm/i915: Tidy up signed/unsigned comparison drm/i915: Enable IPS with only sprite plane visible too, v4. drm/i915: Make ips_enabled a property depending on whether IPS is enabled, v3. drm/i915: Avoid PPS HW/SW state mismatch due to rounding drm/i915: Skip switch-to-kernel-context on suspend when wedged drm/i915/glk: Apply WaProgramL3SqcReg1DefaultForPerf for GLK too ...
-
