- 02 Jan, 2013 1 commit
-
-
Ariel Elior authored
To support probing and removing of a bnx2x virtual function the following were added: 1. add bnx2x_vfpf.h: defines the VF to PF channel 2. add bnx2x_sriov.h: header for bnx2x SR-IOV functionality 3. enumerate VF hw types (identify VFs) 4. if driving a VF, map VF bar 5. if driving a VF, allocate Vf to PF channel 6. refactor interrupt flows to include VF Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 30 Dec, 2012 6 commits
-
-
Flavio Leitner authored
This patch adds few ethtool operations to team driver. Signed-off-by: Flavio Leitner <fbl@redhat.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
veth is lacking most modern facilities, like SG, checksums, TSO. It makes sense to extend dev->features to get them, or GRO aggregation is defeated by a forced segmentation. Reported-by: Andrew Vagin <avagin@parallels.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
veth stats are a bit bloated. There is no need to account transmit and receive stats, since they are absolutely symmetric. Also use a per device atomic64_t for the dropped counter, as it should never be used in fast path. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Flavio Leitner authored
The user space teamd daemon may need to control the master's carrier state depending on the selected mode. Signed-off-by: Flavio Leitner <fbl@redhat.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
-
stephen hemminger authored
The bridge link detection should follow the operational state of the lower device, rather than the carrier bit. This allows devices like tunnels that are controlled by userspace control plane to work with bridge STP link management. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Reviewed-by: Flavio Leitner <fbl@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Daniel Borkmann authored
Currently, we return -EINVAL for malformed or wrong BPF filters. However, this is not done for BPF_S_ANC* operations, which makes it more difficult to detect if it's actually supported or not by the BPF machine. Therefore, we should also return -EINVAL if K is within the SKF_AD_OFF universe and the ancillary operation did not match. Why exactly is it needed? If tools such as libpcap/tcpdump want to make use of new ancillary operations (like filtering VLAN in kernel space), there is currently no sane way to test if this feature / BPF_S_ANC* op is present or not, since no error is returned. This patch will make life easier for that and allow for a proper usage for user space applications. There was concern, if this patch will break userland. Short answer: Yes and no. Long answer: It will "break" only for code that calls ... { BPF_LD | BPF_(W|H|B) | BPF_ABS, 0, 0, <K> }, ... where <K> is in [0xfffff000, 0xffffffff] _and_ <K> is *not* an ancillary. And here comes the BUT: assuming some *old* code will have such an instruction where <K> is between [0xfffff000, 0xffffffff] and it doesn't know ancillary operations, then this will give a non-expected / unwanted behavior as well (since we do not return the BPF machine with 0 after a failed load_pointer(), which was the case before introducing ancillary operations, but load sth. into the accumulator instead, and continue with the next instruction, for instance). Thus, user space code would already have been broken by introducing ancillary operations into the BPF machine per se. Code that does such a direct load, e.g. "load word at packet offset 0xffffffff into accumulator" ("ld [0xffffffff]") is quite broken, isn't it? The whole assumption of ancillary operations is that no-one intentionally calls things like "ld [0xffffffff]" and expect this word to be loaded from such a packet offset. Hence, we can also safely make use of this feature testing patch and facilitate application development. Therefore, at least from this patch onwards, we have *for sure* a check whether current or in future implemented BPF_S_ANC* ops are supported in the kernel. Patch was tested on x86_64. (Thanks to Eric for the previous review.) Cc: Eric Dumazet <eric.dumazet@gmail.com> Reported-by: Ani Sinha <ani@aristanetworks.com> Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 29 Dec, 2012 3 commits
-
-
stephen hemminger authored
Sparse detected case where this local function should be static. It may even allow some compiler optimizations. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
stephen hemminger authored
Detected by sparse. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
stephen hemminger authored
Fix sparse warning about local function that should be static. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 28 Dec, 2012 6 commits
-
-
Eric Dumazet authored
Use the new per task frag allocator in skb_append_datato_frags(), to reduce number of frags and page allocator overhead. Tested: ifconfig lo mtu 16436 perf record netperf -t UDP_STREAM ; perf report before : Throughput: 32928 Mbit/s 51.79% netperf [kernel.kallsyms] [k] copy_user_generic_string 5.98% netperf [kernel.kallsyms] [k] __alloc_pages_nodemask 5.58% netperf [kernel.kallsyms] [k] get_page_from_freelist 5.01% netperf [kernel.kallsyms] [k] __rmqueue 3.74% netperf [kernel.kallsyms] [k] skb_append_datato_frags 1.87% netperf [kernel.kallsyms] [k] prep_new_page 1.42% netperf [kernel.kallsyms] [k] next_zones_zonelist 1.28% netperf [kernel.kallsyms] [k] __inc_zone_state 1.26% netperf [kernel.kallsyms] [k] alloc_pages_current 0.78% netperf [kernel.kallsyms] [k] sock_alloc_send_pskb 0.74% netperf [kernel.kallsyms] [k] udp_sendmsg 0.72% netperf [kernel.kallsyms] [k] zone_watermark_ok 0.68% netperf [kernel.kallsyms] [k] __cpuset_node_allowed_softwall 0.67% netperf [kernel.kallsyms] [k] fib_table_lookup 0.60% netperf [kernel.kallsyms] [k] memcpy_fromiovecend 0.55% netperf [kernel.kallsyms] [k] __udp4_lib_lookup after: Throughput: 47185 Mbit/s 61.74% netperf [kernel.kallsyms] [k] copy_user_generic_string 2.07% netperf [kernel.kallsyms] [k] prep_new_page 1.98% netperf [kernel.kallsyms] [k] skb_append_datato_frags 1.02% netperf [kernel.kallsyms] [k] sock_alloc_send_pskb 0.97% netperf [kernel.kallsyms] [k] enqueue_task_fair 0.97% netperf [kernel.kallsyms] [k] udp_sendmsg 0.91% netperf [kernel.kallsyms] [k] __ip_route_output_key 0.88% netperf [kernel.kallsyms] [k] __netif_receive_skb 0.87% netperf [kernel.kallsyms] [k] fib_table_lookup 0.85% netperf [kernel.kallsyms] [k] resched_task 0.78% netperf [kernel.kallsyms] [k] __udp4_lib_lookup 0.77% netperf [kernel.kallsyms] [k] _raw_spin_lock_irqsave Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jiri Pirko authored
Signed-off-by: Jiri Pirko <jiri@resnulli.us> Acked-by: Flavio Leitner <fbl@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jiri Pirko authored
Signed-off-by: Jiri Pirko <jiri@resnulli.us> Acked-by: Flavio Leitner <fbl@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jiri Pirko authored
Make carrier writable Signed-off-by: Jiri Pirko <jiri@resnulli.us> Acked-by: Flavio Leitner <fbl@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jiri Pirko authored
This allows a driver to register change_carrier callback which will be called whenever user will like to change carrier state. This is useful for devices like dummy, gre, team and so on. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Acked-by: Flavio Leitner <fbl@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Sasha Levin authored
Signed-off-by: Sasha Levin <sasha.levin@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 27 Dec, 2012 3 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-stagingLinus Torvalds authored
Pull hwmon fixes from Guenter Roeck: - Report i2c errors to userspace in lm73 driver - Fix problem with DIV_ROUND_CLOSEST and unsigned divisors in emc6w201 driver * tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (emc6w201) Fix DIV_ROUND_CLOSEST problem with unsigned divisors hwmon: (lm73} Detect and report i2c bus errors
-
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespaceLinus Torvalds authored
Pull namespace fixes from Eric Biederman: "This tree includes two bug fixes for problems Oleg spotted on his review of the recent pid namespace work. A small fix to not enable bottom halves with irqs disabled, and a trivial build fix for f2fs with user namespaces enabled." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: f2fs: Don't assign e_id in f2fs_acl_from_disk proc: Allow proc_free_inum to be called from any context pidns: Stop pid allocation when init dies pidns: Outlaw thread creation after unshare(CLONE_NEWPID)
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) GRE tunnel drivers don't set the transport header properly, they also blindly deref the inner protocol ipv4 and needs some checks. Fixes from Isaku Yamahata. 2) Fix sleeps while atomic in netdevice rename code, from Eric Dumazet. 3) Fix double-spinlock in solos-pci driver, from Dan Carpenter. 4) More ARP bug fixes. Fix lockdep splat in arp_solicit() and then the bug accidentally added by that fix. From Eric Dumazet and Cong Wang. 5) Remove some __dev* annotations that slipped back in, as well as all HOTPLUG references. From Greg KH 6) RDS protocol uses wrong interfaces to access scatter-gather elements, causing a regression. From Mike Marciniszyn. 7) Fix build error in cpts driver, from Richard Cochran. 8) Fix arithmetic in packet scheduler, from Stefan Hasko. 9) Similarly, fix association during calculation of random backoff in batman-adv. From Akinobu Mita. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (21 commits) ipv6/ip6_gre: set transport header correctly ipv4/ip_gre: set transport header correctly to gre header IB/rds: suppress incompatible protocol when version is known IB/rds: Correct ib_api use with gs_dma_address/sg_dma_len net/vxlan: Use the underlying device index when joining/leaving multicast groups tcp: should drop incoming frames without ACK flag set netprio_cgroup: define sk_cgrp_prioidx only if NETPRIO_CGROUP is enabled cpts: fix a run time warn_on. cpts: fix build error by removing useless code. batman-adv: fix random jitter calculation arp: fix a regression in arp_solicit() net: sched: integer overflow fix CONFIG_HOTPLUG removal from networking core Drivers: network: more __dev* removal bridge: call br_netpoll_disable in br_add_if ipv4: arp: fix a lockdep splat in arp_solicit() tuntap: dont use a private kmem_cache net: devnet_rename_seq should be a seqcount ip_gre: fix possible use after free ip_gre: make ipgre_tunnel_xmit() not parse network header as IP unconditionally ...
-
- 26 Dec, 2012 14 commits
-
-
Isaku Yamahata authored
ip6gre_xmit2() incorrectly sets transport header to inner payload instead of GRE header. It seems copy-and-pasted from ipip.c. Set transport header to gre header. (In ipip case the transport header is the inner ip header, so that's correct.) Found by inspection. In practice the incorrect transport header doesn't matter because the skb usually is sent to another net_device or socket, so the transport header isn't referenced. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Isaku Yamahata authored
ipgre_tunnel_xmit() incorrectly sets transport header to inner payload instead of GRE header. It seems copy-and-pasted from ipip.c. So set transport header to gre header. (In ipip case the transport header is the inner ip header, so that's correct.) Found by inspection. In practice the incorrect transport header doesn't matter because the skb usually is sent to another net_device or socket, so the transport header isn't referenced. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Marciniszyn, Mike authored
Add an else to only print the incompatible protocol message when version hasn't been established. Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Marciniszyn, Mike authored
0b088e00 ("RDS: Use page_remainder_alloc() for recv bufs") added uses of sg_dma_len() and sg_dma_address(). This makes RDS DOA with the qib driver. IB ulps should use ib_sg_dma_len() and ib_sg_dma_address respectively since some HCAs overload ib_sg_dma* operations. Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Yan Burman authored
The socket calls from vxlan to join/leave multicast group aren't using the index of the underlying device, as a result the stack uses the first interface that is up. This results in vxlan being non functional over a device which isn't the 1st to be up. Fix this by providing the iflink field to the vxlan instance to the multicast calls. Signed-off-by: Yan Burman <yanb@mellanox.com> Acked-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
In commit 96e0bf4b (tcp: Discard segments that ack data not yet sent) John Dykstra enforced a check against ack sequences. In commit 354e4aa3 (tcp: RFC 5961 5.2 Blind Data Injection Attack Mitigation) I added more safety tests. But we missed fact that these tests are not performed if ACK bit is not set. RFC 793 3.9 mandates TCP should drop a frame without ACK flag set. " fifth check the ACK field, if the ACK bit is off drop the segment and return" Not doing so permits an attacker to only guess an acceptable sequence number, evading stronger checks. Many thanks to Zhiyun Qian for bringing this issue to our attention. See : http://web.eecs.umich.edu/~zhiyunq/pub/ccs12_TCP_sequence_number_inference.pdfReported-by: Zhiyun Qian <zhiyunq@umich.edu> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Nandita Dukkipati <nanditad@google.com> Cc: Neal Cardwell <ncardwell@google.com> Cc: John Dykstra <john.dykstra1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Christoffer Dall authored
Unfortunately with !CONFIG_PAGEFLAGS_EXTENDED, (!PageHead) is false, and (PageHead) is true, for tail pages. If this is indeed the intended behavior, which I doubt because it breaks cache cleaning on some ARM systems, then the nomenclature is highly problematic. This patch makes sure PageHead is only true for head pages and PageTail is only true for tail pages, and neither is true for non-compound pages. [ This buglet seems ancient - seems to have been introduced back in Apr 2008 in commit 6a1e7f77: "pageflags: convert to the use of new macros". And the reason nobody noticed is because the PageHead() tests are almost all about just sanity-checking, and only used on pages that are actual page heads. The fact that the old code returned true for tail pages too was thus not really noticeable. - Linus ] Signed-off-by: Christoffer Dall <cdall@cs.columbia.edu> Acked-by: Andrea Arcangeli <aarcange@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Will Deacon <Will.Deacon@arm.com> Cc: Steve Capper <Steve.Capper@arm.com> Cc: Christoph Lameter <cl@linux.com> Cc: stable@kernel.org # 2.6.26+ Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Li Zefan authored
sock->sk_cgrp_prioidx won't be used at all if CONFIG_NETPRIO_CGROUP=n. Signed-off-by: Li Zefan <lizefan@huawei.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Richard Cochran authored
This patch fixes a warning in clk_enable by calling clk_prepare_enable instead. Signed-off-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Richard Cochran authored
The cpts driver tries to obtain the input clock frequency by calling the clock's internal 'recalc' method. Since <plat/clock.h> has been removed, this code can no longer compile. However, the driver never makes use of the frequency value, so this patch fixes the issue by removing the offending code altogether. Signed-off-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Akinobu Mita authored
batadv_iv_ogm_emit_send_time() attempts to calculates a random integer in the range of 'orig_interval +- BATADV_JITTER' by the below lines. msecs = atomic_read(&bat_priv->orig_interval) - BATADV_JITTER; msecs += (random32() % 2 * BATADV_JITTER); But it actually gets 'orig_interval' or 'orig_interval - BATADV_JITTER' because '%' and '*' have same precedence and associativity is left-to-right. This adds the parentheses at the appropriate position so that it matches original intension. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Acked-by: Antonio Quartulli <ordex@autistici.org> Cc: Marek Lindner <lindner_marek@yahoo.de> Cc: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Cc: Antonio Quartulli <ordex@autistici.org> Cc: b.a.t.m.a.n@lists.open-mesh.org Cc: "David S. Miller" <davem@davemloft.net> Cc: netdev@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric W. Biederman authored
With user namespaces enabled building f2fs fails with: CC fs/f2fs/acl.o fs/f2fs/acl.c: In function ‘f2fs_acl_from_disk’: fs/f2fs/acl.c:85:21: error: ‘struct posix_acl_entry’ has no member named ‘e_id’ make[2]: *** [fs/f2fs/acl.o] Error 1 make[2]: Target `__build' not remade because of errors. e_id is a backwards compatibility field only used for file systems that haven't been converted to use kuids and kgids. When the posix acl tag field is neither ACL_USER nor ACL_GROUP assigning e_id is unnecessary. Remove the assignment so f2fs will build with user namespaces enabled. Cc: Namjae Jeon <namjae.jeon@samsung.com> Cc: Amit Sahrawat <a.sahrawat@samsung.com> Acked-by: Jaegeuk Kim <jaegeuk.kim@samsung.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
-
Eric W. Biederman authored
While testing the pid namespace code I hit this nasty warning. [ 176.262617] ------------[ cut here ]------------ [ 176.263388] WARNING: at /home/eric/projects/linux/linux-userns-devel/kernel/softirq.c:160 local_bh_enable_ip+0x7a/0xa0() [ 176.265145] Hardware name: Bochs [ 176.265677] Modules linked in: [ 176.266341] Pid: 742, comm: bash Not tainted 3.7.0userns+ #18 [ 176.266564] Call Trace: [ 176.266564] [<ffffffff810a539f>] warn_slowpath_common+0x7f/0xc0 [ 176.266564] [<ffffffff810a53fa>] warn_slowpath_null+0x1a/0x20 [ 176.266564] [<ffffffff810ad9ea>] local_bh_enable_ip+0x7a/0xa0 [ 176.266564] [<ffffffff819308c9>] _raw_spin_unlock_bh+0x19/0x20 [ 176.266564] [<ffffffff8123dbda>] proc_free_inum+0x3a/0x50 [ 176.266564] [<ffffffff8111d0dc>] free_pid_ns+0x1c/0x80 [ 176.266564] [<ffffffff8111d195>] put_pid_ns+0x35/0x50 [ 176.266564] [<ffffffff810c608a>] put_pid+0x4a/0x60 [ 176.266564] [<ffffffff8146b177>] tty_ioctl+0x717/0xc10 [ 176.266564] [<ffffffff810aa4d5>] ? wait_consider_task+0x855/0xb90 [ 176.266564] [<ffffffff81086bf9>] ? default_spin_lock_flags+0x9/0x10 [ 176.266564] [<ffffffff810cab0a>] ? remove_wait_queue+0x5a/0x70 [ 176.266564] [<ffffffff811e37e8>] do_vfs_ioctl+0x98/0x550 [ 176.266564] [<ffffffff810b8a0f>] ? recalc_sigpending+0x1f/0x60 [ 176.266564] [<ffffffff810b9127>] ? __set_task_blocked+0x37/0x80 [ 176.266564] [<ffffffff810ab95b>] ? sys_wait4+0xab/0xf0 [ 176.266564] [<ffffffff811e3d31>] sys_ioctl+0x91/0xb0 [ 176.266564] [<ffffffff810a95f0>] ? task_stopped_code+0x50/0x50 [ 176.266564] [<ffffffff81939199>] system_call_fastpath+0x16/0x1b [ 176.266564] ---[ end trace 387af88219ad6143 ]--- It turns out that spin_unlock_bh(proc_inum_lock) is not safe when put_pid is called with another spinlock held and irqs disabled. For now take the easy path and use spin_lock_irqsave(proc_inum_lock) in proc_free_inum and spin_loc_irq in proc_alloc_inum(proc_inum_lock). Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
-
Eric W. Biederman authored
Oleg pointed out that in a pid namespace the sequence. - pid 1 becomes a zombie - setns(thepidns), fork,... - reaping pid 1. - The injected processes exiting. Can lead to processes attempting access their child reaper and instead following a stale pointer. That waitpid for init can return before all of the processes in the pid namespace have exited is also unfortunate. Avoid these problems by disabling the allocation of new pids in a pid namespace when init dies, instead of when the last process in a pid namespace is reaped. Pointed-out-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
-
- 25 Dec, 2012 2 commits
-
-
Eric W. Biederman authored
The sequence: unshare(CLONE_NEWPID) clone(CLONE_THREAD|CLONE_SIGHAND|CLONE_VM) Creates a new process in the new pid namespace without setting pid_ns->child_reaper. After forking this results in a NULL pointer dereference. Avoid this and other nonsense scenarios that can show up after creating a new pid namespace with unshare by adding a new check in copy_prodcess. Pointed-out-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
-
Cong Wang authored
Sedat reported the following commit caused a regression: commit 9650388b Author: Eric Dumazet <edumazet@google.com> Date: Fri Dec 21 07:32:10 2012 +0000 ipv4: arp: fix a lockdep splat in arp_solicit This is due to the 6th parameter of arp_send() needs to be NULL for the broadcast case, the above commit changed it to an all-zero array by mistake. Reported-by: Sedat Dilek <sedat.dilek@gmail.com> Tested-by: Sedat Dilek <sedat.dilek@gmail.com> Cc: Sedat Dilek <sedat.dilek@gmail.com> Cc: Eric Dumazet <edumazet@google.com> Cc: David S. Miller <davem@davemloft.net> Cc: Julian Anastasov <ja@ssi.bg> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 23 Dec, 2012 3 commits
-
-
git://git.pengutronix.de/git/wsa/linuxLinus Torvalds authored
Pull i2c __dev* attribute removal from Wolfram Sang: "The squashed patches from Bill to get rid of the __dev* annotations in the i2c subsystem. I couldn't include it in my previous pull request due to some dependency with the mfd subsystem. I had this patch in linux-next for two days before rc1 and nothing popped up." * 'i2c-embedded/for-next' of git://git.pengutronix.de/git/wsa/linux: i2c: remove __dev* attributes from subsystem
-
Zlatko Calusic authored
Teach pgdat_balanced() about order-0 allocations so that we can simplify code in a few places in vmstat.c. Suggested-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Zlatko Calusic <zlatko.calusic@iskon.hr> Cc: Mel Gorman <mgorman@suse.de> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Rafael J. Wysocki authored
Commit f0ed2ce8 ("[media] uvcvideo: Set error_idx properly for extended controls API failures") causes user space to behave incorrectly on one of my test machines (there is no sound under KDE 4.9.4 using pulseaudio and there is a knotify4 process occupying one of the CPU cores 100% of the time). Reverting that commit entirely fixes the problem for me. However, commit f0ed2ce8 appears to do more than it follows from its changelog, because the changelog only says about the changes related to ctrls->error_idx, while the commit additionally changes error codes returned by various functions in uvc_ctrl.c and uvc_v4l2.c. It turns out that the changes of the returned error codes confuse the user spce, so it is sufficient to revert the part of commit f0ed2ce8 not mentioned in its changelog to fix the problem. [ 'ENOENT' is not a valid error return from an ioctl to begin with, and I don't understand how anybody ever even thought it would be. - Linus ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Mauro Carvalho Chehab <mchehab@redhat.com> Cc: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
- 22 Dec, 2012 2 commits
-
-
Bill Pemberton authored
CONFIG_HOTPLUG is going away as an option. As result the __dev* markings will be going away. Remove use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Acked-by: Peter Korsgaard <peter.korsgaard@barco.com> (for ocores and mux-gpio) Acked-by: Havard Skinnemoen <hskinnemoen@gmail.com> (for i2c-gpio) Acked-by: Guan Xuetao <gxt@mprc.pku.edu.cn> (for puf3) Acked-by: Barry Song <baohua.song@csr.com> (for sirf) Reviewed-by: Jean Delvare <khali@linux-fr.org> [wsa: Fixed "foo* bar" flaws while we are here] Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
-
Guenter Roeck authored
Result of DIV_ROUND_CLOSEST is undefined for negative dividends if the divisor variable type is unsigned. Fix by declaring divisor as signed variable. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Jean Delvare <khali@linux-fr.org>
-