- 06 Nov, 2005 40 commits
-
-
Kyungmin Park authored
Now we can use the generic platform driver Signed-off-by:
Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de>
-
Kyungmin Park authored
Signed-off-by:
-
David Vrabel authored
- Intel chip driver has a reboot notifier so no need to reset the chip here. - Don't play with chip selects (platform code should do this if necessary). Signed-off-by:
David Vrabel <dvrabel@arcom.com> Signed-off-by:
-
Ferenc Havasi authored
Signed-off-by:
Ferenc Havasi <havasi@inf.u-szeged.hu> Signed-off-by:
-
Ferenc Havasi authored
The goal of summary is to speed up the mount time. Erase block summary (EBS) stores summary information at the end of every (closed) erase block. It is no longer necessary to scan all nodes separetly (and read all pages of them) just read this "small" summary, where every information is stored which is needed at mount time. This summary information is stored in a JFFS2_FEATURE_RWCOMPAT_DELETE. During the mount process if there is no summary info the orignal scan process will be executed. EBS works with NAND and NOR flashes, too. There is a user space tool called sumtool to generate this summary information for a JFFS2 image. Signed-off-by:
-
Kyungmin Park authored
Signed-off-by:
-
Kyungmin Park authored
- Remove unused block, page parameters - Add constant instead of runtime value Signed-off-by:
-
Kyungmin Park authored
Signed-off-by:
-
Kyungmin Park authored
- Update OMAP OneNAND mapping file using device driver model - Remove board specific macro and values. Signed-off-by:
-
Kyungmin Park authored
Based on NAND memory bad block table code Signed-off-by:
-
Kyungmin Park authored
Add OneNAND Sync. Burst Read support Tested with OMAP platform Signed-off-by:
-
Kyungmin Park authored
OneNAND is a new flash technology from Samsung with integrated SRAM buffers and logic interface. Signed-off-by:
-
Ferenc Havasi authored
Remove support for virtual blocks, which are build by concatenation of multiple physical erase blocks. For more information please read the MTD mailing list thread "[PATCH] remove support for virtual blocks" Signed-off-by:
-
Artem B. Bityutskiy authored
Signed-off-by:
Artem B. Bityutskiy <dedekind@infradead.org> Signed-off-by:
-
Artem B. Bityutskiy authored
When data starts from the beginning of NAND page, 'len' must be zero, not c->wbuf_page. Thanks to Zoltan Sogor for reporting this problem. Signed-off-by:
-
Artem B. Bityutskiy authored
Signed-off-by:
-
Artem B. Bityutskiy authored
From: David Woodhouse <dwmw2@infradead.org> Signed-off-by:
-
Artem B. Bityutskiy authored
Signed-off-by:
-
Thomas Gleixner authored
The bit mask used for oob size calculation was using 2 bits instead of one. Fortunately the next bit has been 0 all the time. Thanks to Nathan H. for pointing this out Signed-off-by: -
Thomas Gleixner authored
Signed-off-by: -
David Woodhouse authored
Signed-off-by:
Youssef Hmamouche <hyoussef@gmail.com> Signed-off-by:
David Woodhouse <dwmw2@infradead.org> Signed-off-by:
-
Nicolas Pitre authored
Intels Sibley flash needs JFFS2 write buffer functionality Signed-off-by:
Nicolas Pitre <nico@cam.org> Signed-off-by:
-
Nicolas Pitre authored
While this might be useful for all supported flash types, it is mandatory for proper JFFS2 support with Sibley flash. Signed-off-by:
-
Nicolas Pitre authored
This updates the Primary Vendor-Specific Extended Query parsing to version 1.4 in order to get the information about the Configurable Programming Mode regions implemented in the Sibley flash, as well as selecting the appropriate write command code. This flash does not behave like traditional NOR flash when writing data. While mtdblock should just work, further changes are needed for JFFS2 use. Signed-off-by:
-
Nicolas Pitre authored
This includes improved error handling/reporting plus some other message cleanups. Signed-off-by:
-
Sean Young authored
This type of flash translation layer (FTL) is used by the Embedded BIOS by General Software. It is known as the Resident Flash Disk (RFD), see: http://www.gensw.com/pages/prod/bios/rfd.htmSigned-off-by:
Sean Young <sean@mess.org> Signed-off-by:
-
Artem B. Bityutskiy authored
Remove more noisy debugs. Add current->pid to debug messages. Remove bogus includes. Signed-off-by:
-
Artem B. Bityutskiy authored
The previous changes introduced wrong length calculations. Signed-off-by:
-
Artem B. Bityutskiy authored
Remove extra noisy debugs Signed-off-by:
-
Artem B. Bityutskiy authored
Instead of building fragtree starting from node with the smallest version number, start from the highest. This helps to avoid reading and checking obsolete nodes. Signed-off-by:
-
Artem B. Bityutskiy authored
Signed-off-by:
-
Artem B. Bityutskiy authored
Signed-off-by:
-
Andrew Lunn authored
The debug code cleanup broke the eCos build. Signed-off-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
Artem B. Bityutskiy authored
Replace the D1(printk()) style debugging with the new debug macros Signed-off-by:
-
Artem B. Bityutskiy authored
Move functions to read inodes into readinode.c Move functions to handle fragtree and dentry lists into nodelist.[ch] Signed-off-by:
-
Artem B. Bityutskiy authored
Small comment cleanups. Remove a unused macro Signed-off-by:
-
Ferenc Havasi authored
Remove unused compressor code Signed-off-by:
-
Artem B. Bityutskiy authored
Rename functions to a name matching the functionality. Remove stall debug code Signed-off-by:
-
Artem B. Bityutskiy authored
Various simplifiactions. printk format corrections. Convert more code to use the new debug functions. Signed-off-by:
-
Artem B. Bityutskiy authored
When JFFS22 is unable to read the root inode, the bad root inode object is not freed and remains sticked in the jffs2_i slab cache. When we further try to free the slab cache (e.g., on rmmod jffs2), slab allocator subsystem panics. Fix this bug. Signed-off-by:
-
