Let's disable all scaling that requires horizontal decimation with
higher factor than 4, until we have better estimates of what we can
and can not do. However, NV12 color format appears to work Ok with
all decimation factors.

When decimating horizontally by more that 4 the dss is not able to
fetch the data in burst mode. When this happens it is hard to tell if
there enough bandwidth. Despite what theory says this appears to be
true also for 16-bit color formats.
Signed-off-by: Jyri Sarha <jsarha@ti.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

Move drm_atomic_helper_commit_modeset_enables() call to before
drm_atomic_helper_commit_planes() call and have a
omap_atomic_wait_for_completion() call after both.

With the current dss dispc implementation we have to enable the new
modeset before we can commit planes. The dispc ovl configuration
relies on the video mode configuration been written into the HW when
the ovl configuration is calculated.

This approach is not ideal because after a mode change the plane
update is executed only after the first vblank interrupt. The dispc
implementation should be fixed so that it is able use uncommitted drm
state information.  information.
Signed-off-by: Jyri Sarha <jsarha@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

This reverts commit dadf4659.

If planes are not disabled when the they are not on any crtc anymore
they will remain active and may show as "ghosts" when the crtc they
were last on is active again.
Signed-off-by: Jyri Sarha <jsarha@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

Some additional fixes for 4.11.  Delayed a bit due to Chinese New Year. Highlights:
- Powerplay fixes
- VCE and UVD powergating fixes
- Clean up amdgpu SI gfx code to match CI and VI
- Misc bug fixes

* 'drm-next-4.11' of git://people.freedesktop.org/~agd5f/linux: (30 commits)
  drm/amdgpu: report the number of bytes moved at buffer creation
  drm/amdgpu: fix a potential deadlock in amdgpu_bo_create_restricted()
  drm/amdgpu: add support for new smc firmware on polaris
  drm/amd/powerplay: refine code to avoid potential bug that the memory not cleared.
  drm/amdgpu: shut up #warning for compile testing
  drm/amdgpu/virt: fix double kfree on bo_va
  drm/radeon: remove some dead code
  drm/radeon: avoid kernel segfault in vce when gpu fails to resume
  drm/amd/powerplay: set fan speed to max in profile peak mode only.
  drm/amd/gfx6: update gb_addr_config
  drm/amdgpu: update HAINAN_GB_ADDR_CONFIG_GOLDEN
  drm/amdgpu: update VERDE_GB_ADDR_CONFIG_GOLDEN
  drm/amdgpu: refine si_read_register
  drm/amdgpu/gfx6: clean up spi configuration
  drm/amdgpu/gfx6: clean up cu configuration
  drm/amdgpu/gfx6: clean up rb configuration
  drm/amdgpu: refine vce3.0 code and related powerplay pg code.
  drm/amdgpu: move subfunctions to the front of vce_v2_0.c.
  drm/amdgpu: enable vce pg feature on Kv.
  drm/amdgpu: refine code for VCE2.0 and related dpm code.
  ...

two minor fixes.

* tag 'drm-fsl-dcu-for-v4.11' of http://git.agner.ch/git/linux-drm-fsl-dcu:
  drm/fsl-dcu: check for clk_prepare_enable() error
  drm/fsl-dcu: remove unneeded 'ret' assignment

Merge tag 'drm-misc-next-fixes-2017-02-09' of git://anongit.freedesktop.org/git/drm-misc into drm-next

Just 3 bugfixes for 4.11 merge window:

- fbdev module unload oops fix from Chris
- patch from Dan that look really dangers, better safe than sorry

* tag 'drm-misc-next-fixes-2017-02-09' of git://anongit.freedesktop.org/git/drm-misc:
  drm/atomic: fix an error code in mode_fixup()
  drm: Cancel drm_fb_helper_resume_work on unload
  drm: Cancel drm_fb_helper_dirty_work on unload

Like ttm_bo_validate(), ttm_bo_init() might need to move BO and
the number of bytes moved by TTM should be reported. This can help
the throttle buffer migration mechanism to make a better decision.

v2: fix computation
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

When ttm_bo_init() fails, the reservation mutex should be unlocked.

In debug build, the kernel reported "possible recursive locking
detected" in this codepath. For debugging purposes, I also added
a "WARN_ON(ww_mutex_is_locked())" when ttm_bo_init() fails and the
mutex was locked as expected.

This should fix (random) GPU hangs. The easy way to reproduce the
issue is to change the "Super Sampling" option from 1.0 to 2.0 in
Hitman. It will create a huge buffer, evict a bunch of buffers
(around ~5k) and deadlock.

This regression has been introduced pretty recently.

v2: only release the mutex if resv is NULL

Fixes: 12a852219583 ("drm/amdgpu: improve AMDGPU_GEM_CREATE_VRAM_CLEARED handling (v2)")
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Some polaris variants require new smc firmware.
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

My randconfig tests on linux-next showed a newly introduced warning:

drivers/gpu/drm/amd/amdgpu/amdgpu_object.c: In function 'amdgpu_bo_create_restricted':
drivers/gpu/drm/amd/amdgpu/amdgpu_object.c:377:2: error: #warning Please enable CONFIG_MTRR and CONFIG_X86_PAT for better performance thanks to write-combining [-Werror=cpp]

Generally speaking, warnings about bad kernel configuration are not particularly
helpful. We could enforce the selection of X86_PAT through Kconfig, so the driver
cannot even be used unless it is enabled, or we could just rely on the runtime
warning that is also there.

In this version, I'm making the warning conditional on CONFIG_COMPILE_TEST, which
shuts it up for me, but not people that may actually want to run the kernel
as a compromize.

Fixes: a2e2f299 ("drm/amdgpu: Bring bo creation in line with radeon driver (v2)")
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

bo_va is being kfree'd twice, once in the call to amdgpu_vm_bo_rmv
and then a short while later. Fix this double free by removing
the 2nd kfree.

Detected by CoverityScan, CID#1399524 ("Double Free")
Reviewed-by: Monk Liu <monk.liu@amd.com>
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

If "rdev->bios" is NULL then we don't need to free it.
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

When GPU fails to resume we can not trust that value we write to GPU
memory will post and we might get garbage (more like 0xffffffff on
x86) when reading them back. This trigger out of range memory access
in the kernel inside the vce resume code path.

This patch use canonical value to compute offset instead of reading
back value from GPU memory.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Signed-off-by: Flora Cui <Flora.Cui@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Signed-off-by: Flora Cui <Flora.Cui@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Signed-off-by: Flora Cui <Flora.Cui@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Signed-off-by: Flora Cui <Flora.Cui@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Signed-off-by: Flora Cui <Flora.Cui@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Signed-off-by: Flora Cui <Flora.Cui@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Signed-off-by: Flora Cui <Flora.Cui@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

1. not start vce3.0 when hw_init
2. stop vce3.0 when vce idle.
3. pg mask used to ctrl power down/up vce.
4. change cg pg sequence in powerplay.
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

v2: clean up vce cg function.
    use sw cg when vce stoped.

1. implement vce_stop function.
2. not start vce when hw_init.
3. refine vce cg/pg code.
4. delete bypass mode.
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

1. delete redundant cg pg mask check.
   pg mask use to ctrl power on/down uvd.
   not start/stop uvd.
   cg mask will be check when enable mgcg.
2. no need to start uvd when initializ.
   when ring test/ib test/encode, uvd was enabled.
   when uvd idle, uvd was stopped.
3. chang cg pg sequence in powerplay.
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

need to start smc when dpm disabled.
otherwise, uvd can't get response from smu.
so uvd ring test and ib test will timeout.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

1. set uvd_status busy before uvd_start.
2. clear uvd_status to 0 after uvd stop.
   smu firmware may check uvd_status.
3. wait uvd idle before stop uvd.
4. not start uvd when hw_init.
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

1. no need to set cg as use hw dynamic cg.
2. when uvd idle, stop uvd. encode, start uvd.
3. if pg feature enabled, power on/down uvd by smu.
4. drm/amdgpu: dpm do not set uvd pg status.
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Having "ret" be a bool type works for everything except
ret = funcs->atomic_check().  The other functions all return zero on
error but ->atomic_check() returns negative error codes.  We want to
propagate the error code but instead we return 1.

I found this bug with static analysis and I don't know if it affects
run time.

Fixes: 4cd4df80 ("drm/atomic: Add ->atomic_check() to encoder helpers")
Cc: stable@vger.kernel.org
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170207234601.GA23981@mwanda

We can not allow the worker to run after its fbdev, or even the module,
has been removed.

Fixes: cfe63423 ("drm/fb-helper: Add drm_fb_helper_set_suspend_unlocked()")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Noralf Trønnes <noralf@tronnes.org>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v4.9+
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170207124956.14954-2-chris@chris-wilson.co.uk

We can not allow the worker to run after its fbdev, or even the module,
has been removed.

Fixes: eaa434de ("drm/fb-helper: Add fb_deferred_io support")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Noralf Trønnes <noralf@tronnes.org>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v4.7+
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170207124956.14954-1-chris@chris-wilson.co.uk

clk_prepare_enable() may fail, so we should better check its return
value.

Also place the of_node_put() function right after clk_prepare_enable(),
in order to avoid calling of_node_put() twice in case clk_prepare_enable()
fails.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Stefan Agner <stefan@agner.ch>

When devm_kzalloc() fails there is no need to assign an error code
to the 'ret' variable as it will not be used after jumping to the
'err_node_put' label, so just remove the assignment.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Reviewed-by: Gabriel Krisman Bertazi <krisman@collabora.co.uk>
Signed-off-by: Stefan Agner <stefan@agner.ch>

Merge branch 'exynos-drm-next' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-next

Summary:
   - Add UHD support on TM2/TM2E boards.
     . adding interlace mode support and 297MHz pixel clock support
       for UHD mode, setting sysreg register in case of HW trigger mode,
       and adding SiI8620 MHL bridge device support.
   - Fix trigger mode issue on Rinato board.
     . On Rinato board, HW trigger mode doesn't work so fix it.
   - Some fixup and cleanup.

* 'exynos-drm-next' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos:
  drm/exynos: fimd: Do not use HW trigger for exynos3250
  drm/exynos/hdmi: add bridge support
  drm/exynos/decon5433: signal vblank only on odd fields
  drm/exynos/decon5433: add support for interlace modes
  drm/exynos/hdmi: fix PLL for 27MHz settings
  drm/exynos/hdmi: fix VSI infoframe registers
  drm/exynos/hdmi: add 297MHz pixel clock support
  drm/exynos: g2d: change platform driver name to 'exynos-drm-g2d'
  drm/exynos/decon5433: configure sysreg in case of hardware trigger