- 02 Sep, 2008 10 commits
-
-
Senthil Balasubramanian authored
Updating sc_keytype multiple times when groupwise and pairwise ciphers are different results in incorrect pairwise key type assumed for TX control and normal ping fails. This works fine for cases where both groupwise and pairwise ciphers are same. Also use mac80211 provided enums for key length calculation. Signed-off-by: Senthil Balasubramanian <senthilkumar@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Boaz Harrosh authored
A "Set" to a sign-bit in an "&" operation causes a compiler warning. Make calculations unsigned. [ The warning was masked by the old definition of BUILD_BUG_ON() ] Also remove __builtin_constant_p from FIELD_CHECK since BUILD_BUG_ON no longer permits non-const values. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> CC: Ingo Molnar <mingo@elte.hu> CC: Rusty Russell <rusty@rustcorp.com.au> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Jouni Malinen authored
debugfs union in struct ieee80211_sub_if_data is misused by including a common default_key dentry as a union member. This ends occupying the same memory area with the first dentry in other union members (structures; usually drop_unencrypted). Consequently, debugfs operations on default_key symlinks and drop_unencrypted entry are using the same dentry pointer even though they are supposed to be separate ones. This can lead to removing entries incorrectly or potentially leaving something behind since one of the dentry pointers gets lost. Fix this by moving the default_key dentry to a new struct (common_debugfs) that contains dentries (more to be added in future) that are shared by all vif types. The debugfs union must only be used for vif type-specific entries to avoid this type of pointer corruption. Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Adrian Bunk authored
The leak in if_cs_prog_helper() is obvious. It looks a bit as if not freeing "fw" in if_cs_prog_real() was done intentionally, but I'm not seeing why it shouldn't be freed. Reported-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Adrian Bunk <bunk@kernel.org> Acked-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
David Kilroy authored
When multicasting the driver sets the number of group addresses using the count from the previous set multicast command. In general this means you have to set the multicast addresses twice to get the behaviour you want. If we were multicasting, and reduce the number of addresses we are multicasting to, then the driver would write uninitialised data from the stack into the group addresses to multicast to. Only write the multicast addresses we have specifically set. Signed-off-by: David Kilroy <kilroyd@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Tomas Winkler authored
This patch fixes loading firmware from memory above 32bit. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Acked-by: Marcel Holtmann <holtmann@linux.intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Mohamed Abbas authored
The patch fixes CSR_GP_CNTRL_REG_FLAG_INIT_DONE was set instead of cleared which disabled moving device to D0U state. Signed-off-by: Mohamed Abbas <mohamed.abbas@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Tomas Winkler authored
This patch adds workaround for an interrupt related hardware bug on some platforms. (Apparently these platforms boot-up w/ INTX_DISABLED set. -- JWL) Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
John W. Linville authored
GFP_DMA is not necessary for the iwlwifi hardware and it can cause allocation failures and/or invoke the OOM killer on lots of systems. For reference: https://bugzilla.redhat.com/show_bug.cgi?id=459709Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Florian Mickler authored
Current setup with hal and NetworkManager will fail to work without newest hal version with this config option disabled. Although this will solve itself by time, at the moment it is dishonest to say that we don't know any software that uses it, if there are many many people relying on old hal versions. Signed-off-by: Florian Mickler <florian@mickler.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
- 29 Aug, 2008 3 commits
-
-
David S. Miller authored
Nothing in linux/pim.h should be exported to userspace. This should fix the XORP build failure reported by Jose Calhariz, the debain package maintainer. Nothing originally in linux/mroute.h was exported to userspace ever, but some of this stuff started to be when it was moved into this new linux/pim.h, and that was wrong. If we didn't provide these definitions for 10 years we can reasonably expect that applications defined this stuff locally or used GLIBC headers providing the protocol definitions. And as such the only result of this can be conflict and userland build breakage. Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jarek Poplawski authored
Use qdisc_root_sleeping_lock() instead of qdisc_root_lock() where appropriate. The only difference is while dev is deactivated, when currently we can use a sleeping qdisc with the lock of noop_qdisc. This shouldn't be dangerous since after deactivation root lock could be used only by gen_estimator code, but looks wrong anyway. Signed-off-by: Jarek Poplawski <jarkao2@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Yang Hongyang authored
Signed-off-by: Yang Hongyang <yanghy@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 27 Aug, 2008 27 commits
-
-
Vlad Yasevich authored
The number of identifiers needs to be checked against the option length. Also, the identifier index provided needs to be verified to make sure that it doesn't exceed the bounds of the array. Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Vlad Yasevich authored
The bonds check to prevent buffer overlflow was not exactly right. It still allowed overflow of up to 8 bytes which is sizeof(struct sctp_authkey). Since optlen is already checked against the size of that struct, we are guaranteed not to cause interger overflow either. Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eugene Teo authored
There are missing capability checks in the following code: 1300 static int 1301 sbni_ioctl( struct net_device *dev, struct ifreq *ifr, int cmd) 1302 { [...] 1319 case SIOCDEVRESINSTATS : 1320 if( current->euid != 0 ) /* root only */ 1321 return -EPERM; [...] 1336 case SIOCDEVSHWSTATE : 1337 if( current->euid != 0 ) /* root only */ 1338 return -EPERM; [...] 1357 case SIOCDEVENSLAVE : 1358 if( current->euid != 0 ) /* root only */ 1359 return -EPERM; [...] 1372 case SIOCDEVEMANSIPATE : 1373 if( current->euid != 0 ) /* root only */ 1374 return -EPERM; Here's my proposed fix: Missing capability checks. Signed-off-by: Eugene Teo <eugeneteo@kernel.sg> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
-
Jiri Slaby authored
There were 2 omitted readb's used on an iomap space. eliminate them by using ioread8 instead. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Cc: Jesse Brandeburg <jesse.brandeburg@intel.com> Cc: Bruce Allan <bruce.w.allan@intel.com> Cc: PJ Waskiewicz <peter.p.waskiewicz.jr@intel.com> Cc: John Ronciak <john.ronciak@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
-
Frank Blaschka authored
When a preallocated header qdio buffer is filled we have to account the offset for the data length. Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
-
Frank Blaschka authored
In case the netdev unicast list contains additional entries we have to register/deregister them. Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
-
Ursula Braun authored
return value -ENOTSUPP is not valid in userspace context, use -EOPNOTSUPP instead. Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
-
Benjamin Herrenschmidt authored
We must not call dev_mc_add() from within our HW configure which happens before we initialize and register the netdev. Do it in open() instead. Thanks to Sebastian Siewior for tracking it down. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
-
Sebastian Siewior authored
I got the following backtrace while network was unavailble: |NETDEV WATCHDOG: eth0: transmit timed out |BUG: sleeping function called from invalid context at /home/bigeasy/git/linux-2.6-powerpc/kernel/mutex.c:87 |in_atomic():1, irqs_disabled():0 |Call Trace: |[c0383d90] [c0006dd8] show_stack+0x48/0x184 (unreliable) |[c0383db0] [c001e938] __might_sleep+0xe0/0xf4 |[c0383dc0] [c025a43c] mutex_lock+0x24/0x3c |[c0383de0] [c019005c] phy_stop+0x20/0x70 |[c0383df0] [c018d4ec] stop_gfar+0x28/0xf4 |[c0383e10] [c018e8c4] gfar_timeout+0x30/0x60 |[c0383e20] [c01fe7c0] dev_watchdog+0xa8/0x144 |[c0383e30] [c002f93c] run_timer_softirq+0x148/0x1c8 |[c0383e60] [c002b084] __do_softirq+0x5c/0xc4 |[c0383e80] [c00046fc] do_softirq+0x3c/0x54 |[c0383e90] [c002ac60] irq_exit+0x3c/0x5c |[c0383ea0] [c000b378] timer_interrupt+0xe0/0xf8 |[c0383ec0] [c000e5ac] ret_from_except+0x0/0x18 |[c0383f80] [c000804c] cpu_idle+0xcc/0xdc |[c0383fa0] [c025c07c] etext+0x7c/0x90 |[c0383fc0] [c0338960] start_kernel+0x294/0x2a8 |[c0383ff0] [c00003dc] skpinv+0x304/0x340 |------------[ cut here ]------------ The phylock was once a spinlock but got changed into a mutex via commit 35b5f6b1 aka [PHYLIB: Locking fixes for PHY I/O potentially sleeping] Signed-off-by: Sebastian Siewior <bigeasy@linutronix.de> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
-
Ayaz Abdulla authored
Fix the checksum feature advertised in device flags. The hardware support TCP/UDP over IPv4 and TCP/UDP over IPv6 (without IPv6 extension headers). However, the kernel feature flags do not distinguish IPv6 with/without extension headers. Therefore, the driver needs to use NETIF_F_IP_CSUM instead of NETIF_F_HW_CSUM since the latter includes all IPv6 packets. A future patch can be created to check for extension headers and perform software checksum calculation. Signed-off-by: Ayaz Abdulla <aabdulla@nvidia.com> Cc: Jeff Garzik <jgarzik@pobox.com> Cc: Manfred Spraul <manfred@colorfullife.com Cc: <stable@kernel.org> [2.6.25.x, 2.6.26.x] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
-
Oliver Martin authored
Implement set_mac_address for mcs7830. This enables me to use it with my cable modem. Signed-off-by: Oliver Martin <oliver.martin@student.tuwien.ac.at> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
-
Arnd Bergmann authored
This adds USB device IDs for MosChip 7730 and Sitecom LN030 to the mcs7830 driver. The IDs have been reported to work without further modifications. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: David Brownell <david-b@pacbell.net> Cc: Viktor Horvath <ViktorHorvath@gmx.net> Cc: Robbert Wethmar <robbert@wethmar.nl> Cc: Bart van der Klip <bklip@xs4all.nl> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
-
Jeff Garzik authored
Properly handle resource cleanup on unplug/exit. Spotted by Jonathan Cameron Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
-
Santiago Leon authored
This patch fixes a ibmveth bug where bad UDP checksums are being transmitted when checksum offloading is enabled. The hypervisor does checksum offloading only on TCP packets, so ibmveth calls skb_checksum_help() for any other protocol. The bug happens because the packet is being modified after the DMA map, so we would need a memory barrier before making the hypervisor call. Reordering the code so that the DMA map happens after skb_checksum_help() has the additional advantage of fixing a DMA map leak if skb_checksum_help() where to fail. Signed-off-by: Santiago Leon <santil@us.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
-
Denis Joseph Barrow authored
Fixes dev_kfree_skb happening too many times when hso_start_net_device is called from hso_resume. Signed-off-by: Denis Joseph Barrow <D.Barow@option.com> Cc: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
-
Denis Joseph Barrow authored
Fixes Icon-322 detection. Signed-off-by: Denis Joseph Barrow <D.Barow@option.com> Cc: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
-
Jay Cliburn authored
The atl1 driver is causing stalled connections and file corruption whenever TSO is enabled. Two examples are here: http://lkml.org/lkml/2008/7/15/325 http://lkml.org/lkml/2008/8/18/543 Disable TSO by default until we can determine the source of the problem. Signed-off-by: Jay Cliburn <jacliburn@bellsouth.net> cc: stable@kernel.org Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
-
Ilpo Järvinen authored
Doesn't cause problems (yet) because err gets zeroed earlier. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
-
Alexander Duyck authored
Disable support for device 8086:10E8. Currently the result of loading the driver with the device present causes system instability. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
-
Takashi Iwai authored
CC [M] drivers/net/skfp/ess.o drivers/net/skfp/ess.c: In function 'ess_send_response': drivers/net/skfp/ess.c:513: warning: cast from pointer to integer of different size drivers/net/skfp/ess.c: In function 'ess_send_alc_req': drivers/net/skfp/ess.c:609: warning: cast from pointer to integer of different size drivers/net/skfp/ess.c:639: warning: cast from pointer to integer of different size Signed-off-by: Takashi Iwai <tiwai@suse.de> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
-
Hugh Dickins authored
vpnc on today's kernel says Cannot open "/proc/sys/net/ipv4/route/flush": d--------- 0 root root 0 2008-08-26 11:32 /proc/sys/net/ipv4/route d--------- 0 root root 0 2008-08-26 19:16 /proc/sys/net/ipv4/neigh Signed-off-by: Hugh Dickins <hugh@veritas.com> Acked-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Philip Love authored
The size of the TCP header is miscalculated when the window scale ends up being 0. Additionally, this can be induced by sending a SYN to a passive open port with a window scale option with value 0. Signed-off-by: Philip Love <love_phil@emc.com> Signed-off-by: Adam Langley <agl@imperialviolet.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jarek Poplawski authored
Use new qdisc_root_sleeping_lock() instead of qdisc_root_lock() as sch_tree_lock() because this lock could be used while dev is deactivated, but we never need to use this with noop_qdisc as a root. Signed-off-by: Jarek Poplawski <jarkao2@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jarek Poplawski authored
While passing a qdisc root lock to gen_new_estimator() and gen_replace_estimator() dev could be deactivated or even before grafting proper root qdisc as qdisc_sleeping (e.g. qdisc_create), so using qdisc_root_lock() is not enough. This patch adds qdisc_root_sleeping_lock() for this, plus additional checks, where necessary. Signed-off-by: Jarek Poplawski <jarkao2@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jarek Poplawski authored
These pointers are RCU protected, so proper primitives should be used. Signed-off-by: Jarek Poplawski <jarkao2@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-