- 01 Dec, 2019 32 commits
-
-
Wei Yang authored
Just make the code a little easier to read. Link: http://lkml.kernel.org/r/20191006012636.31521-3-richardw.yang@linux.intel.comSigned-off-by:
Wei Yang <richardw.yang@linux.intel.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Oscar Salvador <osalvador@suse.de> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Wei Yang authored
The third parameter of __vma_unlink_common() could differentiate these two types. __vma_unlink_prev() is not necessary now. Link: http://lkml.kernel.org/r/20191006012636.31521-2-richardw.yang@linux.intel.comSigned-off-by:
-
Wei Yang authored
Currently __vma_unlink_common handles two cases: * has_prev * or not When has_prev is false, it is obvious prev is calculated from vma->vm_prev in __vma_unlink_common. When has_prev is true, the prev is passed through from __vma_unlink_prev in __vma_adjust for non-case 8. And at the beginning next is calculated from vma->vm_next, which implies vma is next->vm_prev. The above statement sounds a little complicated, while to think in another point of view, no matter whether vma and next is swapped, the mmap link list still preserves its property. It is proper to access vma->vm_prev. Link: http://lkml.kernel.org/r/20191006012636.31521-1-richardw.yang@linux.intel.comSigned-off-by:
-
Konstantin Khlebnikov authored
This is a very slow operation. Right now POSIX_FADV_DONTNEED is the top user because it has to freeze page references when removing it from the cache. invalidate_bdev() calls it for the same reason. Both are triggered from userspace, so it's easy to generate a storm. mlock/mlockall no longer calls lru_add_drain_all - I've seen here serious slowdown on older kernels. There are some less obvious paths in memory migration/CMA/offlining which shouldn't call frequently. The worst case requires a non-trivial workload because lru_add_drain_all() skips cpus where vectors are empty. Something must constantly generate a flow of pages for each cpu. Also cpus must be busy to make scheduling per-cpu works slower. And the machine must be big enough (64+ cpus in our case). In our case that was a massive series of mlock calls in map-reduce while other tasks write logs (and generates flows of new pages in per-cpu vectors). Mlock calls were serialized by mutex and accumulated latency up to 10 seconds or more. The kernel does not call lru_add_drain_all on mlock paths since 4.15, but the same scenario could be triggered by fadvise(POSIX_FADV_DONTNEED) or any other remaining user. There is no reason to do the drain again if somebody else already drained all the per-cpu vectors while we waited for the lock. Piggyback on a drain starting and finishing while we wait for the lock: all pages pending at the time of our entry were drained from the vectors. Callers like POSIX_FADV_DONTNEED retry their operations once after draining per-cpu vectors when pages have unexpected references. Link: http://lkml.kernel.org/r/157019456205.3142.3369423180908482020.stgit@buzzSigned-off-by:
Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Reviewed-by:
-
Wei Yang authored
The upper level of "if" makes sure (end >= next->vm_end), which means there are only two possibilities: 1) end == next->vm_end 2) end > next->vm_end remove_next is assigned to be (1 + end > next->vm_end). This means if remove_next is 1, end must equal to next->vm_end. The VM_WARN_ON will never trigger. Link: http://lkml.kernel.org/r/20190912063126.13250-1-richardw.yang@linux.intel.comSigned-off-by:
-
Joel Fernandes (Google) authored
When a process updates the RSS of a different process, the rss_stat tracepoint appears in the context of the process doing the update. This can confuse userspace that the RSS of process doing the update is updated, while in reality a different process's RSS was updated. This issue happens in reclaim paths such as with direct reclaim or background reclaim. This patch adds more information to the tracepoint about whether the mm being updated belongs to the current process's context (curr field). We also include a hash of the mm pointer so that the process who the mm belongs to can be uniquely identified (mm_id field). Also vsprintf.c is refactored a bit to allow reuse of hashing code. [akpm@linux-foundation.org: remove unused local `str'] [joelaf@google.com: inline call to ptr_to_hashval] Link: http://lore.kernel.org/r/20191113153816.14b95acd@gandalf.local.home Link: http://lkml.kernel.org/r/20191114164622.GC233237@google.com Link: http://lkml.kernel.org/r/20191106024452.81923-1-joel@joelfernandes.orgSigned-off-by:
Joel Fernandes (Google) <joel@joelfernandes.org> Reported-by:
Ioannis Ilkos <ilkos@google.com> Acked-by: Petr Mladek <pmladek@suse.com> [lib/vsprintf.c] Cc: Tim Murray <timmurray@google.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Carmen Jackson <carmenjackson@google.com> Cc: Mayank Gupta <mayankgupta@google.com> Cc: Daniel Colascione <dancol@google.com> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Minchan Kim <minchan@kernel.org> Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Steven Rostedt <rostedt@goodmis.org> Signed-off-by:
-
Joel Fernandes (Google) authored
Useful to track how RSS is changing per TGID to detect spikes in RSS and memory hogs. Several Android teams have been using this patch in various kernel trees for half a year now. Many reported to me it is really useful so I'm posting it upstream. Initial patch developed by Tim Murray. Changes I made from original patch: o Prevent any additional space consumed by mm_struct. Regarding the fact that the RSS may change too often thus flooding the traces - note that, there is some "hysterisis" with this already. That is - We update the counter only if we receive 64 page faults due to SPLIT_RSS_ACCOUNTING. However, during zapping or copying of pte range, the RSS is updated immediately which can become noisy/flooding. In a previous discussion, we agreed that BPF or ftrace can be used to rate limit the signal if this becomes an issue. Also note that I added wrappers to trace_rss_stat to prevent compiler errors where linux/mm.h is included from tracing code, causing errors such as: CC kernel/trace/power-traces.o In file included from ./include/trace/define_trace.h:102, from ./include/trace/events/kmem.h:342, from ./include/linux/mm.h:31, from ./include/linux/ring_buffer.h:5, from ./include/linux/trace_events.h:6, from ./include/trace/events/power.h:12, from kernel/trace/power-traces.c:15: ./include/trace/trace_events.h:113:22: error: field `ent' has incomplete type struct trace_entry ent; \ Link: http://lore.kernel.org/r/20190903200905.198642-1-joel@joelfernandes.org Link: http://lkml.kernel.org/r/20191001172817.234886-1-joel@joelfernandes.orgCo-developed-by:Tim Murray <timmurray@google.com> Signed-off-by:
Michal Hocko <mhocko@suse.com> Cc: Carmen Jackson <carmenjackson@google.com> Cc: Mayank Gupta <mayankgupta@google.com> Cc: Daniel Colascione <dancol@google.com> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Minchan Kim <minchan@kernel.org> Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by:
-
Kirill A. Shutemov authored
syzbot found the following crash: BUG: KASAN: use-after-free in perf_trace_lock_acquire+0x401/0x530 include/trace/events/lock.h:13 Read of size 8 at addr ffff8880a5cf2c50 by task syz-executor.0/26173 CPU: 0 PID: 26173 Comm: syz-executor.0 Not tainted 5.3.0-rc6 #146 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: perf_trace_lock_acquire+0x401/0x530 include/trace/events/lock.h:13 trace_lock_acquire include/trace/events/lock.h:13 [inline] lock_acquire+0x2de/0x410 kernel/locking/lockdep.c:4411 __raw_spin_lock include/linux/spinlock_api_smp.h:142 [inline] _raw_spin_lock+0x2f/0x40 kernel/locking/spinlock.c:151 spin_lock include/linux/spinlock.h:338 [inline] shmem_fault+0x5ec/0x7b0 mm/shmem.c:2034 __do_fault+0x111/0x540 mm/memory.c:3083 do_shared_fault mm/memory.c:3535 [inline] do_fault mm/memory.c:3613 [inline] handle_pte_fault mm/memory.c:3840 [inline] __handle_mm_fault+0x2adf/0x3f20 mm/memory.c:3964 handle_mm_fault+0x1b5/0x6b0 mm/memory.c:4001 do_user_addr_fault arch/x86/mm/fault.c:1441 [inline] __do_page_fault+0x536/0xdd0 arch/x86/mm/fault.c:1506 do_page_fault+0x38/0x590 arch/x86/mm/fault.c:1530 page_fault+0x39/0x40 arch/x86/entry/entry_64.S:1202 It happens if the VMA got unmapped under us while we dropped mmap_sem and inode got freed. Pinning the file if we drop mmap_sem fixes the issue. Link: http://lkml.kernel.org/r/20190927083908.rhifa4mmaxefc24r@boxSigned-off-by:Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reported-by: syzbot+03ee87124ee05af991bd@syzkaller.appspotmail.com Acked-by:
Johannes Weiner <hannes@cmpxchg.org> Reviewed-by:
Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Hillf Danton <hdanton@sina.com> Cc: Hugh Dickins <hughd@google.com> Cc: Josef Bacik <josef@toxicpanda.com> Signed-off-by:
-
Johannes Weiner authored
One of our services is observing hanging ps/top/etc under heavy write IO, and the task states show this is an mmap_sem priority inversion: A write fault is holding the mmap_sem in read-mode and waiting for (heavily cgroup-limited) IO in balance_dirty_pages(): balance_dirty_pages+0x724/0x905 balance_dirty_pages_ratelimited+0x254/0x390 fault_dirty_shared_page.isra.96+0x4a/0x90 do_wp_page+0x33e/0x400 __handle_mm_fault+0x6f0/0xfa0 handle_mm_fault+0xe4/0x200 __do_page_fault+0x22b/0x4a0 page_fault+0x45/0x50 Somebody tries to change the address space, contending for the mmap_sem in write-mode: call_rwsem_down_write_failed_killable+0x13/0x20 do_mprotect_pkey+0xa8/0x330 SyS_mprotect+0xf/0x20 do_syscall_64+0x5b/0x100 entry_SYSCALL_64_after_hwframe+0x3d/0xa2 The waiting writer locks out all subsequent readers to avoid lock starvation, and several threads can be seen hanging like this: call_rwsem_down_read_failed+0x14/0x30 proc_pid_cmdline_read+0xa0/0x480 __vfs_read+0x23/0x140 vfs_read+0x87/0x130 SyS_read+0x42/0x90 do_syscall_64+0x5b/0x100 entry_SYSCALL_64_after_hwframe+0x3d/0xa2 To fix this, do what we do for cache read faults already: drop the mmap_sem before calling into anything IO bound, in this case the balance_dirty_pages() function, and return VM_FAULT_RETRY. Link: http://lkml.kernel.org/r/20190924194238.GA29030@cmpxchg.orgSigned-off-by: -
Chris Down authored
This has confused a significant number of people using cgroups inside Facebook, and some of those outside as well judging by posts like this[0] (although it's not a problem unique to cgroup v2). If shmem handling in particular becomes more coherent at some point in the future -- although that seems unlikely now -- we can change the wording here. [0]: https://unix.stackexchange.com/q/525092/10762 Link: http://lkml.kernel.org/r/20191111144958.GA11914@chrisdown.nameSigned-off-by:
Chris Down <chris@chrisdown.name> Acked-by:
-
Shakeel Butt authored
Since commit 1ba6fc9a ("mm: vmscan: do not share cgroup iteration between reclaimers"), the memcg reclaim does not bail out earlier based on sc->nr_reclaimed and will traverse all the nodes. All the reclaimable pages of the memcg on all the nodes will be scanned relative to the reclaim priority. So, there is no need to maintain state regarding which node to start the memcg reclaim from. This patch effectively reverts the commit 889976db ("memcg: reclaim memory from nodes in round-robin order") and commit 453a9bf3 ("memcg: fix numa scan information update to be triggered by memory event"). [shakeelb@google.com: v2] Link: http://lkml.kernel.org/r/20191030204232.139424-1-shakeelb@google.com Link: http://lkml.kernel.org/r/20191029234753.224143-1-shakeelb@google.comSigned-off-by:
Shakeel Butt <shakeelb@google.com> Acked-by:
Roman Gushchin <guro@fb.com> Acked-by:
-
Hao Lee authored
These comments should be updated as memcg limit enforcement has been moved from zones to nodes. Link: http://lkml.kernel.org/r/20191022150618.GA15519@haolee.github.ioSigned-off-by:
Hao Lee <haolee.swjtu@gmail.com> Acked-by:
-
Johannes Weiner authored
Setting a memory.high limit below the usage makes almost no effort to shrink the cgroup to the new target size. While memory.high is a "soft" limit that isn't supposed to cause OOM situations, we should still try harder to meet a user request through persistent reclaim. For example, after setting a 10M memory.high on an 800M cgroup full of file cache, the usage shrinks to about 350M: + cat /cgroup/workingset/memory.current 841568256 + echo 10M + cat /cgroup/workingset/memory.current 355729408 This isn't exactly what the user would expect to happen. Setting the value a few more times eventually whittles the usage down to what we are asking for: + echo 10M + cat /cgroup/workingset/memory.current 104181760 + echo 10M + cat /cgroup/workingset/memory.current 31801344 + echo 10M + cat /cgroup/workingset/memory.current 10440704 To improve this, add reclaim retry loops to the memory.high write() callback, similar to what we do for memory.max, to make a reasonable effort that the usage meets the requested size after the call returns. Afterwards, a single write() to memory.high is enough in all but extreme cases: + cat /cgroup/workingset/memory.current 841609216 + echo 10M + cat /cgroup/workingset/memory.current 10182656 790M is not a reasonable reclaim target to ask of a single reclaim invocation. And it wouldn't be reasonable to optimize the reclaim code for it. So asking for the full size but retrying is not a bad choice here: we express our intent, and benefit if reclaim becomes better at handling larger requests, but we also acknowledge that some of the deltas we can encounter in memory_high_write() are just too ridiculously big for a single reclaim invocation to manage. Link: http://lkml.kernel.org/r/20191022201518.341216-2-hannes@cmpxchg.orgSigned-off-by:
-
Johannes Weiner authored
When the reclaim loop in memory_max_write() is ^C'd or similar, we set err to -EINTR. But we don't return err. Once the limit is set, we always return success (nbytes). Delete the dead code. Link: http://lkml.kernel.org/r/20191022201518.341216-1-hannes@cmpxchg.orgSigned-off-by:
-
Yafang Shao authored
The mem_cgroup_reclaim_cookie is only used in memcg softlimit reclaim now, and the priority of the reclaim is always 0. We don't need to define the iter in struct mem_cgroup_per_node as an array any more. That could make the code more clear and save some space. Link: http://lkml.kernel.org/r/1569897728-1686-1-git-send-email-laoar.shao@gmail.comSigned-off-by:
Yafang Shao <laoar.shao@gmail.com> Acked-by:
-
Fengguang Wu authored
This avoids duplicated PageReferenced() calls. No behavior change. Link: http://lkml.kernel.org/r/20191016225326.GB12497@wfg-t540p.sh.intel.comSigned-off-by:
Fengguang Wu <fengguang.wu@intel.com> Reviewed-by:
Vlastimil Babka <vbabka@suse.cz> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Liu Jingqi <jingqi.liu@intel.com> Signed-off-by:
-
Naohiro Aota authored
A zoned block device consists of a number of zones. Zones are either conventional and accepting random writes or sequential and requiring that writes be issued in LBA order from each zone write pointer position. For the write restriction, zoned block devices are not suitable for a swap device. Disallow swapon on them. [akpm@linux-foundation.org: reflow and reword comment, per Christoph] Link: http://lkml.kernel.org/r/20191015085814.637837-1-naohiro.aota@wdc.comSigned-off-by:
Naohiro Aota <naohiro.aota@wdc.com> Reviewed-by:
Christoph Hellwig <hch@lst.de> Cc: Matthew Wilcox <willy@infradead.org> Cc: "Theodore Y. Ts'o" <tytso@mit.edu> Cc: Hannes Reinecke <hare@suse.de> Cc: Hugh Dickins <hughd@google.com> Signed-off-by:
-
Liu Xiang authored
Fix comments of __get_user_pages() and get_user_pages_remote(), make them more clear. Link: http://lkml.kernel.org/r/1572443533-3118-1-git-send-email-liuxiang_1999@126.comSigned-off-by:
Liu Xiang <liuxiang_1999@126.com> Suggested-by:
John Hubbard <jhubbard@nvidia.com> Reviewed-by:
David Hildenbrand <david@redhat.com> Reviewed-by:
-
zhong jiang authored
check_and_migrate_cma_pages() was recording the result of __get_user_pages_locked() in an unsigned "nr_pages" variable. Because __get_user_pages_locked() returns a signed value that can include negative errno values, this had the effect of hiding errors. Change check_and_migrate_cma_pages() implementation so that it uses a signed variable instead, and propagates the results back to the caller just as other gup internal functions do. This was discovered with the help of unsigned_lesser_than_zero.cocci. Link: http://lkml.kernel.org/r/1571671030-58029-1-git-send-email-zhongjiang@huawei.comSigned-off-by:
zhong jiang <zhongjiang@huawei.com> Suggested-by:
Ira Weiny <ira.weiny@intel.com> Signed-off-by:
-
Konstantin Khlebnikov authored
generic_file_direct_write() tries to invalidate pagecache after O_DIRECT write. Unlike to similar code in dio_complete() this silently ignores error returned from invalidate_inode_pages2_range(). According to comment this code here because not all filesystems call dio_complete() to do proper invalidation after O_DIRECT write. Noticeable example is a blkdev_direct_IO(). This patch calls dio_warn_stale_pagecache() if invalidation fails. Link: http://lkml.kernel.org/r/157270038294.4812.2238891109785106069.stgit@buzzSigned-off-by:
Jan Kara <jack@suse.cz> Cc: Jens Axboe <axboe@kernel.dk> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Konstantin Khlebnikov authored
This helper prints warning if direct I/O write failed to invalidate cache, and set EIO at inode to warn usersapce about possible data corruption. See also commit 5a9d929d ("iomap: report collisions between directio and buffered writes to userspace"). Direct I/O is supported by non-disk filesystems, for example NFS. Thus generic code needs this even in kernel without CONFIG_BLOCK. Link: http://lkml.kernel.org/r/157270038074.4812.7980855544557488880.stgit@buzzSigned-off-by:
-
Konstantin Khlebnikov authored
generic_file_direct_write() invalidates cache at entry. Second time this should be done when request completes. But this function calls second invalidation at exit unconditionally even for async requests. This patch skips second invalidation for async requests (-EIOCBQUEUED). Link: http://lkml.kernel.org/r/157270037850.4812.15036239021726025572.stgit@buzzSigned-off-by:
-
Yu Zhao authored
The function doesn't need to return any value, and the check can be done in one pass. There is a behavior change: before the patch, we stop at the first invalid free object; after the patch, we stop at the first invalid object, free or in use. This shouldn't matter because the original behavior isn't intended anyway. Link: http://lkml.kernel.org/r/20191108193958.205102-1-yuzhao@google.comSigned-off-by:
Yu Zhao <yuzhao@google.com> Acked-by:
-
Yu Zhao authored
Slub doesn't use PG_active and PG_error anymore. Link: http://lkml.kernel.org/r/20191007222023.162256-1-yuzhao@google.comSigned-off-by:
David Rientjes <rientjes@google.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by:
-
Miles Chen authored
With commit ad67b74d ("printk: hash addresses printed with %p"), it is a little bit harder to match the fault addresses printed by check_bytes_and_report() or slab_pad_check() in the dump because the fault addresses may not show up in the dump. Print the offset of the fault addresses to make it easier to match the incorrect poison or padding values in the dump. Before: We have to search the "63" in the dump. If we want to get the offset of 63, we have to count it from the start of Object dump. ============================================================= BUG kmalloc-128 (Not tainted): Poison overwritten ------------------------------------------------------------- Disabling lock debugging due to kernel taint INFO: 0x00000000570da294-0x00000000570da294. First byte 0x63 instead of 0x6b ... INFO: Object 0x000000006ebb3b9e @offset=14208 fp=0x0000000065862488 Redzone 00000000a6abccff: bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb Redzone 00000000741c16f0: bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb Redzone 0000000061ad278f: bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb Redzone 000000000467c1bd: bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb Redzone 000000008812766b: bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb Redzone 000000003d9b8f25: bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb Redzone 0000000000d80c33: bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb Redzone 00000000867b0d90: bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb Object 000000006ebb3b9e: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b Object 000000005ea59a9f: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b Object 000000003ef8bddc: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b Object 000000008190375d: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b Object 000000006df7fb32: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b Object 0000000069474eae: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b Object 0000000008073b7d: 6b 6b 6b 6b 63 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b Object 00000000b45ae74d: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b a5 After: We know the fault address is at @offset=1508, and the Object is at @offset=1408, so we know the fault address is at offset=100 within the object. ========================================================= BUG kmalloc-128 (Not tainted): Poison overwritten --------------------------------------------------------- Disabling lock debugging due to kernel taint INFO: 0x00000000638ec1d1-0x00000000638ec1d1 @offset=1508. First byte 0x63 instead of 0x6b ... INFO: Object 0x000000008171818d @offset=1408 fp=0x0000000066dae230 Redzone 00000000e2697ab6: bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb Redzone 0000000064b6a381: bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb Redzone 00000000e413a234: bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb Redzone 0000000004c1dfeb: bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb Redzone 000000009ad24d42: bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb Redzone 000000002a196a23: bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb Redzone 00000000a7b8468a: bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb Redzone 0000000088db6da3: bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb Object 000000008171818d: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b Object 000000007c4035d4: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b Object 000000004dd281a4: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b Object 0000000079121dff: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b Object 00000000756682a9: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b Object 0000000053b7e541: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b Object 0000000091f8d530: 6b 6b 6b 6b 63 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b Object 000000009c76035c: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b a5 Link: http://lkml.kernel.org/r/20190925140807.20490-1-miles.chen@mediatek.comSigned-off-by:
Miles Chen <miles.chen@mediatek.com> Reviewed-by:
-
Pengfei Li authored
The type of local variable *type* of new_kmalloc_cache() should be enum kmalloc_cache_type instead of int, so correct it. Link: http://lkml.kernel.org/r/1569241648-26908-4-git-send-email-lpf.vector@gmail.comSigned-off-by:
Pengfei Li <lpf.vector@gmail.com> Acked-by:
-
Pengfei Li authored
The size of kmalloc can be obtained from kmalloc_info[], so remove kmalloc_size() that will not be used anymore. Link: http://lkml.kernel.org/r/1569241648-26908-3-git-send-email-lpf.vector@gmail.comSigned-off-by:
-
Pengfei Li authored
Patch series "mm, slab: Make kmalloc_info[] contain all types of names", v6. There are three types of kmalloc, KMALLOC_NORMAL, KMALLOC_RECLAIM and KMALLOC_DMA. The name of KMALLOC_NORMAL is contained in kmalloc_info[].name, but the names of KMALLOC_RECLAIM and KMALLOC_DMA are dynamically generated by kmalloc_cache_name(). Patch1 predefines the names of all types of kmalloc to save the time spent dynamically generating names. These changes make sense, and the time spent by new_kmalloc_cache() has been reduced by approximately 36.3%. Time spent by new_kmalloc_cache() (CPU cycles) 5.3-rc7 66264 5.3-rc7+patch 42188 This patch (of 3): There are three types of kmalloc, KMALLOC_NORMAL, KMALLOC_RECLAIM and KMALLOC_DMA. The name of KMALLOC_NORMAL is contained in kmalloc_info[].name, but the names of KMALLOC_RECLAIM and KMALLOC_DMA are dynamically generated by kmalloc_cache_name(). This patch predefines the names of all types of kmalloc to save the time spent dynamically generating names. Besides, remove the kmalloc_cache_name() that is no longer used. Link: http://lkml.kernel.org/r/1569241648-26908-2-git-send-email-lpf.vector@gmail.comSigned-off-by: -
Ben Dooks authored
The declarations of __block_write_begin_int and guard_bio_eod are needed from internal.h so include it to fix the following sparse warnings: fs/buffer.c:1930:5: warning: symbol '__block_write_begin_int' was not declared. Should it be static? fs/buffer.c:2994:6: warning: symbol 'guard_bio_eod' was not declared. Should it be static? Link: http://lkml.kernel.org/r/20191011170039.16100-1-ben.dooks@codethink.co.ukSigned-off-by:
Ben Dooks <ben.dooks@codethink.co.uk> Reviewed-by:
-
Saurav Girepunje authored
Use true/false for bool return type of has_bh_in_lru(). Link: http://lkml.kernel.org/r/20191029040529.GA7625@sauravSigned-off-by:
Saurav Girepunje <saurav.girepunje@gmail.com> Reviewed-by:
-
Ding Xiang authored
Fix a static code checker warning: fs/ocfs2/acl.c:331 ocfs2_acl_chmod() warn: passing zero to 'PTR_ERR' Link: http://lkml.kernel.org/r/1dee278b-6c96-eec2-ce76-fe6e07c6e20f@linux.alibaba.com Fixes: 5ee0fbd5 ("ocfs2: revert using ocfs2_acl_chmod to avoid inode cluster lock hang") Signed-off-by:
Ding Xiang <dingxiang@cmss.chinamobile.com> Reviewed-by:
Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Gang He <ghe@suse.com> Cc: Jun Piao <piaojun@huawei.com> Signed-off-by:
-
Colin Ian King authored
Here are some of the more common spelling mistakes and typos that I've found while fixing up spelling mistakes in the kernel since July 2019. Link: http://lkml.kernel.org/r/20191112092142.97989-1-colin.king@canonical.comSigned-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
- 30 Nov, 2019 8 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fsLinus Torvalds authored
Pull fsnotify updates from Jan Kara: "Three fsnotify cleanups" * tag 'fsnotify_for_v5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: fsnotify: Add git tree reference to MAINTAINERS fsnotify/fdinfo: exportfs_encode_inode_fh() takes pointer as 4th argument fsnotify: move declaration of fsnotify_mark_connector_cachep to fsnotify.h
-
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fsLinus Torvalds authored
Pull ext2, quota, reiserfs cleanups and fixes from Jan Kara: - Refactor the quota on/off kernel internal interfaces (mostly for ubifs quota support as ubifs does not want to have inodes holding quota information) - A few other small quota fixes and cleanups - Various small ext2 fixes and cleanups - Reiserfs xattr fix and one cleanup * tag 'for_v5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: (28 commits) ext2: code cleanup for descriptor_loc() fs/quota: handle overflows of sysctl fs.quota.* and report as unsigned long ext2: fix improper function comment ext2: code cleanup for ext2_try_to_allocate() ext2: skip unnecessary operations in ext2_try_to_allocate() ext2: Simplify initialization in ext2_try_to_allocate() ext2: code cleanup by calling ext2_group_last_block_no() ext2: introduce new helper ext2_group_last_block_no() reiserfs: replace open-coded atomic_dec_and_mutex_lock() ext2: check err when partial != NULL quota: Handle quotas without quota inodes in dquot_get_state() quota: Make dquot_disable() work without quota inodes quota: Drop dquot_enable() fs: Use dquot_load_quota_inode() from filesystems quota: Rename vfs_load_quota_inode() to dquot_load_quota_inode() quota: Simplify dquot_resume() quota: Factor out setup of quota inode quota: Check that quota is not dirty before release quota: fix livelock in dquot_writeback_dquots ext2: don't set *count in the case of failure in ext2_try_to_allocate() ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofsLinus Torvalds authored
Pull erofs updates from Gao Xiang: "No major kernel updates for this round since I'm fully diving into LZMA algorithm internals now to provide high CR XZ algorihm support. That needs more work and time for me to get a better compression time. Summary: - Introduce superblock checksum support - Set iowait when waiting I/O for sync decompression path - Several code cleanups" * tag 'erofs-for-5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs: erofs: remove unnecessary output in erofs_show_options() erofs: drop all vle annotations for runtime names erofs: support superblock checksum erofs: set iowait for sync decompression erofs: clean up decompress queue stuffs erofs: get rid of __stagingpage_alloc helper erofs: remove dead code since managed cache is now built-in erofs: clean up collection handling routines
-
git://git.samba.org/sfrench/cifs-2.6Linus Torvalds authored
Pull cifs updates from Steve French: "Various smb3 fixes (including 12 for stable) and also features (addition of multichannel support)" * tag '5.5-rc-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6: (41 commits) CIFS: fix a white space issue in cifs_get_inode_info() cifs: update internal module version number cifs: Always update signing key of first channel cifs: Fix retrieval of DFS referrals in cifs_mount() cifs: Fix potential softlockups while refreshing DFS cache cifs: Fix lookup of root ses in DFS referral cache cifs: Fix use-after-free bug in cifs_reconnect() cifs: dump channel info in DebugData smb3: dump in_send and num_waiters stats counters by default cifs: try harder to open new channels CIFS: Properly process SMB3 lease breaks cifs: move cifsFileInfo_put logic into a work-queue cifs: try opening channels after mounting CIFS: refactor cifs_get_inode_info() cifs: switch servers depending on binding state cifs: add server param cifs: add multichannel mount options and data structs cifs: sort interface list by speed CIFS: Fix SMB2 oplock break processing cifs: don't use 'pre:' for MODULE_SOFTDEP ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fsLinus Torvalds authored
Pull f2fs updates from Jaegeuk Kim: "In this round, we've introduced fairly small number of patches as below. Enhancements: - improve the in-place-update IO flow - allocate segment to guarantee no GC for pinned files Bug fixes: - fix updatetime in lazytime mode - potential memory leak in f2fs_listxattr - record parent inode number in rename2 correctly - fix deadlock in f2fs_gc along with atomic writes - avoid needless data migration in GC" * tag 'f2fs-for-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: f2fs: stop GC when the victim becomes fully valid f2fs: expose main_blkaddr in sysfs f2fs: choose hardlimit when softlimit is larger than hardlimit in f2fs_statfs_project() f2fs: Fix deadlock in f2fs_gc() context during atomic files handling f2fs: show f2fs instance in printk_ratelimited f2fs: fix potential overflow f2fs: fix to update dir's i_pino during cross_rename f2fs: support aligned pinned file f2fs: avoid kernel panic on corruption test f2fs: fix wrong description in document f2fs: cache global IPU bio f2fs: fix to avoid memory leakage in f2fs_listxattr f2fs: check total_segments from devices in raw_super f2fs: update multi-dev metadata in resize_fs f2fs: mark recovery flag correctly in read_raw_super_block() f2fs: fix to update time in lazytime mode
-
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fsLinus Torvalds authored
Pull AFS updates from David Howells: "Minor cleanups and fix: - Minor fix to make some debugging statements display information from the correct iov_iter. - Rename some members and variables to make things more obvious or consistent. - Provide a helper to wrap increments of the usage count on the afs_read struct. - Use scnprintf() to print into a stack buffer rather than sprintf(). - Remove some set but unused variables" * tag 'afs-next-20191121' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs: afs: Remove set but not used variable 'ret' afs: Remove set but not used variables 'before', 'after' afs: xattr: use scnprintf afs: Introduce an afs_get_read() refcount helper afs: Rename desc -> req in afs_fetch_data() afs: Switch the naming of call->iter and call->_iter afs: Use call->_iter not &call->iter in debugging statements -
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4Linus Torvalds authored
Pull ext4 updates from Ted Ts'o: "This merge window saw the the following new featuers added to ext4: - Direct I/O via iomap (required the iomap-for-next branch from Darrick as a prereq). - Support for using dioread-nolock where the block size < page size. - Support for encryption for file systems where the block size < page size. - Rework of journal credits handling so a revoke-heavy workload will not cause the journal to run out of space. - Replace bit-spinlocks with spinlocks in jbd2 Also included were some bug fixes and cleanups, mostly to clean up corner cases from fuzzed file systems and error path handling" * tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (59 commits) ext4: work around deleting a file with i_nlink == 0 safely ext4: add more paranoia checking in ext4_expand_extra_isize handling jbd2: make jbd2_handle_buffer_credits() handle reserved handles ext4: fix a bug in ext4_wait_for_tail_page_commit ext4: bio_alloc with __GFP_DIRECT_RECLAIM never fails ext4: code cleanup for get_next_id ext4: fix leak of quota reservations ext4: remove unused variable warning in parse_options() ext4: Enable encryption for subpage-sized blocks fs/buffer.c: support fscrypt in block_read_full_page() ext4: Add error handling for io_end_vec struct allocation jbd2: Fine tune estimate of necessary descriptor blocks jbd2: Provide trace event for handle restarts ext4: Reserve revoke credits for freed blocks jbd2: Make credit checking more strict jbd2: Rename h_buffer_credits to h_total_credits jbd2: Reserve space for revoke descriptor blocks jbd2: Drop jbd2_space_needed() jbd2: Account descriptor blocks into t_outstanding_credits jbd2: Factor out common parts of stopping and restarting a handle ... -
git://git.kernel.org/pub/scm/fs/xfs/xfs-linuxLinus Torvalds authored
Pull splice fix from Darrick Wong: "Fix another place in the splice code where a pipe could ask a filesystem for a longer read than the pipe actually has free buffer space" * tag 'vfs-5.5-merge-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: splice: only read in as much information as there is pipe buffer space
-
