- 21 Mar, 2006 40 commits
-
-
Patrick McHardy authored
This allows to make decisions based on the revision (and address family with a follow-up patch) at runtime. Signed-off-by:
Patrick McHardy <kaber@trash.net> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Patrick McHardy authored
Signed-off-by:
-
Patrick McHardy authored
Signed-off-by:
-
Patrick McHardy authored
Signed-off-by:
-
Patrick McHardy authored
Signed-off-by:
-
Patrick McHardy authored
Signed-off-by:
-
Patrick McHardy authored
Introduce new functions for common match/target checks (private data size, valid hooks, valid tables and valid protocols) to get more consistent error reporting and to avoid each module duplicating them. Signed-off-by:
-
Yasuyuki Kozakai authored
Signed-off-by:
Yasuyuki Kozakai <yasuyuki.kozakai@toshiba.co.jp> Signed-off-by:
-
Holger Eitzenberger authored
The recent (kernel 2.6.15.1) fix for PPTP NAT helper introduced a bug - which only appears if DEBUGP is enabled though. The calculation of the CID offset into a PPTP request struct is not correct, so that at least not the correct CID is displayed if DEBUGP is enabled. This patch corrects CID offset calculation and introduces a #define for that. Signed-off-by:
Holger Eitzenberger <heitzenberger@astaro.com> Signed-off-by:
-
Andrea Bittau authored
There was a hybrid use of standard timers and sk_timers. This caused the reference count of the sock to be incorrect when resetting the RTO timer. The sock reference count should now be correct, enabling its destruction, and allowing the DCCP module to be unloaded. Signed-off-by:
Andrea Bittau <a.bittau@cs.ucl.ac.uk> Signed-off-by:
Arnaldo Carvalho de Melo <acme@mandriva.com>
-
Ian McDonald authored
Now CCID2 is the default, as stated in the RFC drafts, but we allow a config where just CCID3 is built, where CCID3 becomes the default. Signed-off-by:
Ian McDonald <imcdnzl@gmail.com> Signed-off-by:
-
Harald Welte authored
This patch moves all helper related data fields of 'struct nf_conn' into a separate structure 'struct nf_conn_help'. This new structure is only present in conntrack entries for which we actually have a helper loaded. Also, this patch cleans up the nf_conntrack 'features' mechanism to resemble what the original idea was: Just glue the feature-specific data structures at the end of 'struct nf_conn', and explicitly re-calculate the pointer to it when needed rather than keeping pointers around. Saves 20 bytes per conntrack on my x86_64 box. A non-helped conntrack is 276 bytes. We still need to save another 20 bytes in order to fit into to target of 256bytes. Signed-off-by:
Harald Welte <laforge@netfilter.org> Signed-off-by:
-
Michael Chan authored
Include <linux/vmalloc.h> so that it compiles properly on all archs. Update version to 1.4.38. Signed-off-by:
Michael Chan <mchan@broadcom.com> Signed-off-by:
-
John Heffner authored
Implementation of packetization layer path mtu discovery for TCP, based on the internet-draft currently found at <http://www.ietf.org/internet-drafts/draft-ietf-pmtud-method-05.txt>. Signed-off-by:
John Heffner <jheffner@psc.edu> Signed-off-by:
-
Michael Chan authored
Update version to 1.4.37. Add missing flush_scheduled_work() in bnx2_suspend as noted by Jeff Garzik. Signed-off-by:
-
Michael Chan authored
Support bigger rx ring sizes (up to 1020) in the rx fast path. Signed-off-by:
-
Michael Chan authored
Increase maximum receive ring size from 255 to 1020 by supporting up to 4 linked pages of receive descriptors. To accomodate the higher memory usage, each physical descriptor page is allocated separately and the software ring that keeps track of the SKBs and the DMA addresses is allocated using vmalloc. Some of the receive-related fields in the bp structure are re- organized a bit for better locality of reference. The max. was reduced to 1020 from 4080 after discussion with David Miller. This patch contains ring init code changes only. This next patch contains rx data path code changes. Signed-off-by:
-
Michael Chan authored
Fix the rx code path that does not handle the full rx ring correctly. When the rx ring is set to the max. size (i.e. 255), the consumer and producer indices will be the same when completing an rx packet. Fix the rx code to handle this condition properly. Signed-off-by:
-
Michael Chan authored
Add ETHTOOL_GREGS support. Signed-off-by:
-
Michael Chan authored
Eliminate some of the registers in ethtool register test to reduce driver size. Signed-off-by:
-
Michael Chan authored
Update version to 3.50. Signed-off-by:
-
Michael Chan authored
Support WoL during shutdown by calling tg3_set_power_state(tp, PCI_D3hot) during tg3_close(). Change the power state parameter to pci_power_t type and use constants defined in pci.h. Certain ethtool operations cannot be performed after tg3_close() because the device will go to low power state. Add return -EAGAIN in such cases where appropriate. Signed-off-by:
-
Michael Chan authored
Enable TSO by default on newer chips that support TSO in hardware. Leave TSO off by default on older chips that do firmware TSO because performance is slightly lower. Signed-off-by:
-
Michael Chan authored
Add support for 5714S and 5715S. Signed-off-by:
-
Adrian Bunk authored
struct fib_rules became global for no good reason. Signed-off-by:
Adrian Bunk <bunk@stusta.de> Signed-off-by:
-
Jesper Juhl authored
vfree does it's own NULL checking, so checking a pointer before handing it to vfree is pointless. Signed-off-by:
Jesper Juhl <jesper.juhl@gmail.com> Signed-off-by:
-
Andrea Bittau authored
Still needs more work, but boots and doesn't crashes, even does some negotiation! 18:38:52.174934 127.0.0.1.43458 > 127.0.0.1.5001: request <change_l ack_ratio 2, change_r ccid 2, change_l ccid 2> 18:38:52.218526 127.0.0.1.5001 > 127.0.0.1.43458: response <nop, nop, change_l ack_ratio 2, confirm_r ccid 2 2, confirm_l ccid 2 2, confirm_r ack_ratio 2> 18:38:52.185398 127.0.0.1.43458 > 127.0.0.1.5001: <nop, confirm_r ack_ratio 2, ack_vector0 0x00, elapsed_time 212> :-) Signed-off-by:
-
Andrea Bittau authored
Original work by Andrea Bittau, Arnaldo Melo cleaned up and fixed several issues on the merge process. For now CCID2 was turned the default for all SOCK_DCCP connections, but this will be remedied soon with the merge of the feature negotiation code. Signed-off-by:
-
Arnaldo Carvalho de Melo authored
Signed-off-by:
-
Arnaldo Carvalho de Melo authored
Signed-off-by:
-
Arnaldo Carvalho de Melo authored
Signed-off-by:
-
Arnaldo Carvalho de Melo authored
Testing if the ccid being instantiated has these methods in ccid_init(). Signed-off-by:
-
Andrea Bittau authored
Based on a patch by Andrea Bittau. Signed-off-by:
-
Arnaldo Carvalho de Melo authored
For iterating over list of given type continuing from existing point. Signed-off-by:
-
Robert Olsson authored
Signed-off-by:
Robert Olsson <robert.olsson@its.uu.se> Signed-off-by:
-
Arnaldo Carvalho de Melo authored
For iterate over list of given type from existing point safe against removal of list entry. Signed-off-by:
-
Arnaldo Carvalho de Melo authored
Signed-off-by:
-
Arnaldo Carvalho de Melo authored
Signed-off-by:
-
Arnaldo Carvalho de Melo authored
Simplifying the code a bit as we're always using DCCP_MAX_ACKVEC_LEN. Signed-off-by:
-
Harald Welte authored
By using a sequence number for every logged netfilter event, we can determine from userspace whether logging information was lots somewhere downstream. The user has a choice of either having per-instance local sequence counters, or using a global sequence counter, or both. Signed-off-by:
-
