- 08 Feb, 2019 1 commit
-
-
Maxime Ripard authored
Since the DPHY rework, one error path doesn't set the return error code before jumping to its error label, which in turns make gcc (rightfully) complain about the variable holding the error code being uninitialized. Fix this. Fixes: bb3b6fcb ("sun6i: dsi: Convert to generic phy handling") Reported-by:
Stephen Rothwell <sfr@canb.auug.org.au> Reviewed-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190208090540.19626-1-maxime.ripard@bootlin.com
-
- 07 Feb, 2019 11 commits
-
-
Sam Ravnborg authored
With the removal of drmP.h from drm_modeset_helper.h the drmP.h are no longer included by any include files in include/drm. The drmP.h file is thus only included explicit either in .c files or in local .h files. This makes the process of deleting the drmP.h includes easier as we have a more local dependency chain. v2: - moved updates of .c files in drm/ to a dedicated patch. This allows the updates to the *.c files to be committed without the removal part. So this patch can wait if it causes build failures due to pending changes Signed-off-by:
Sam Ravnborg <sam@ravnborg.org> Reviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <maxime.ripard@bootlin.com> Cc: Sean Paul <sean@poorly.run> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Signed-off-by:
-
Sam Ravnborg authored
The use of drmP.h is discouraged and removal of it from drm_modeset_helper.h caused drm/ to fail to build. This patch introduce the necessary fixes to prepare for the drmP.h removal from drm_modeset_helper.h. Build tested on x86, arm, alpha, ia64 allmodconfig/allyesconfig. Signed-off-by:
-
Sam Ravnborg authored
The use of drmP.h is discouraged and removal of it from drm_modeset_helper.h caused rcar-du to fail to build. This patch introduce the necessary fixes to prepare for the drmP.h removal from drm_modeset_helper.h. Build tested on arm allmodconfig/allyesconfig. v2: - new patch. Changes like drm_probe_helper and other required several updates Signed-off-by:
-
Sam Ravnborg authored
The use of drmP.h is discouraged and removal of it from drm_modeset_helper.h caused i915 to fail to build. This patch introduce the necessary fixes to prepare for the drmP.h removal from drm_modeset_helper.h. In the files touched the lists of include files was grouped and sorted. Build tested on x86 and arm allmodconfig / allyesconfig. Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Signed-off-by:
-
Sam Ravnborg authored
The use of drmP.h is discouraged and removal of it from drm_modeset_helper.h caused vboxvideo to fail to build. This patch introduce the necessary fixes to prepare for the drmP.h removal from drm_modeset_helper.h. In the files touched sort the include files Build tested on x86 and arm allmodconfig / allyesconfig. Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Ville Syrjälä authored
The fuzzy drm_calc_{h,v}scale_relaxed() helpers are no longer used. Throw them in the bin. Signed-off-by:Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190206183204.21127-1-ville.syrjala@linux.intel.comAcked-by:
Alex Deucher <alexander.deucher@amd.com>
-
Daniel Vetter authored
Compared to the RFC[1] no changes to the patch itself, but igt moved forward a lot: - gitlab CI builds with: reduced configs/libraries, arm cross build and a sysroot build (should address all the build/cross platform concerns raised in the RFC discussions). - tests reorganized into subdirectories so that the i915-gem tests don't clog the main/shared tests directory anymore - quite a few more non-intel people contributing/reviewing/committing igt tests patches. I think this addresses all the concerns raised in the RFC discussions, and assuming there's enough Acks and no new issues that pop up, we can go ahead with this. v2: - Use "should" (in the usual RFC sense) to make it clear that in the end this is all up to reviewer's discretion, as usual (Jani). - Also in the title s/mandatory/strongly suggested/ (me) - Make it clear we're not going to block features if a testcase is not feasible, given hw and state of igt, both having some good gaps in what can be tested (Harry, Eric, Sean, ...). 1: https://patchwork.kernel.org/patch/10648851/ Cc: Petri Latvala <petri.latvala@intel.com> Cc: Arkadiusz Hiler <arkadiusz.hiler@intel.com> Cc: Liviu Dudau <liviu.dudau@arm.com> Cc: Sean Paul <sean@poorly.run> Cc: Eric Anholt <eric@anholt.net> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Dave Airlie <airlied@redhat.com> Cc: Daniel Stone <daniel@fooishbar.org> Cc: "Wentland, Harry" <Harry.Wentland@amd.com> Cc: Brian Starkey <Brian.Starkey@arm.com> Reviewed-by: Eric Anholt <eric@anholt.net> (v1) Acked-by:
Petri Latvala <petri.latvala@intel.com> Acked-by:
Arkadiusz Hiler <arkadiusz.hiler@intel.com> Acked-by:
Sean Paul <sean@poorly.run> Acked-by:
"Wentland, Harry" <Harry.Wentland@amd.com> Signed-off-by:
Daniel Vetter <daniel.vetter@intel.com> Acked-by:
Liviu Dudau <liviu.dudau@arm.com> Acked-by:
Brian Starkey <brian.starkey@arm.com> Acked-by:
Tomi Valkeinen <tomi.valkeinen@ti.com> Acked-by:
Boris Brezillon <boris.brezillon@collabora.com> Acked-by:
Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190128172258.9585-1-daniel.vetter@ffwll.ch
-
Maxime Ripard authored
Now that we have everything we need in the phy framework to allow to tune the phy parameters, let's convert the Cadence DSI bridge to that API instead of creating a ad-hoc driver for its phy. Acked-by:
-
Maxime Ripard authored
The current configuration of the DSI bridge and its associated D-PHY is intertwined. In order to ease the future conversion to the phy framework for the D-PHY part, let's split the configuration in two. Reviewed-by:
Paul Kocialkowski <paul.kocialkowski@bootlin.com> Signed-off-by:
-
Maxime Ripard authored
Now that our MIPI D-PHY driver has been converted to the phy framework, let's move it into the drivers/phy directory. Reviewed-by:
-
Maxime Ripard authored
Now that we have everything in place in the PHY framework to deal in a generic way with MIPI D-PHY phys, let's convert our PHY driver and its associated DSI driver to that new API. Reviewed-by:
-
- 06 Feb, 2019 6 commits
-
-
Gustavo A. R. Silva authored
One of the more common cases of allocation size calculations is finding the size of a structure that has a zero-sized array at the end, along with memory for some number of elements for that array. For example: struct foo { int stuff; void *entry[]; }; instance = kzalloc(sizeof(struct foo) + count * sizeof(struct boo), GFP_KERNEL); Instead of leaving these open-coded and prone to type mistakes, we can now use the new struct_size() helper: instance = kzalloc(struct_size(instance, entry, count), GFP_KERNEL); This code was detected with the help of Coccinelle. Signed-off-by:Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by:
Eric Anholt <eric@anholt.net> Reviewed-by:
-
Shayenne Moura authored
Remove the list of broken tests on VKMS solved by patchset https://patchwork.freedesktop.org/series/55994/Signed-off-by:
Shayenne Moura <shayenneluzmoura@gmail.com> Signed-off-by:
-
Lyude Paul authored
Looks like when making the final revision of: commit 022debad ("drm/atomic: Add drm_atomic_state->duplicated") I forgot to remove some of the comments that I had added to drm_dp_atomic_find_vcpi_slots() and drm_dp_atomic_release_vcpi_slots() that were no longer valid due to us having removed the state->duplicated checks from each function. This also introduced an error while building the docs with sphinx: ./drivers/gpu/drm/drm_dp_mst_topology.c:3100: WARNING: Inline literal start-string without end-string. So, fix that by just removing the kerneldoc comments. Signed-off-by:
Lyude Paul <lyude@redhat.com> Fixes: 022debad ("drm/atomic: Add drm_atomic_state->duplicated") Reviewed-by:
Daniel Vetter <daniel@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20190202002023.29665-5-lyude@redhat.com
-
Ard Biesheuvel authored
The DRM driver stack is designed to work with cache coherent devices only, but permits an optimization to be enabled in some cases, where for some buffers, both the CPU and the GPU use uncached mappings, removing the need for DMA snooping and allocation in the CPU caches. The use of uncached GPU mappings relies on the correct implementation of the PCIe NoSnoop TLP attribute by the platform, otherwise the GPU will use cached mappings nonetheless. On x86 platforms, this does not seem to matter, as uncached CPU mappings will snoop the caches in any case. However, on ARM and arm64, enabling this optimization on a platform where NoSnoop is ignored results in loss of coherency, which breaks correct operation of the device. Since we have no way of detecting whether NoSnoop works or not, just disable this optimization entirely for ARM and arm64. Cc: Christian Koenig <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: David Zhou <David1.Zhou@amd.com> Cc: Huang Rui <ray.huang@amd.com> Cc: Junwei Zhang <Jerry.Zhang@amd.com> Cc: Michel Daenzer <michel.daenzer@amd.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <maxime.ripard@bootlin.com> Cc: Sean Paul <sean@poorly.run> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Will Deacon <will.deacon@arm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Robin Murphy <robin.murphy@arm.com> Cc: amd-gfx list <amd-gfx@lists.freedesktop.org> Cc: dri-devel <dri-devel@lists.freedesktop.org> Reported-by:
Carsten Haitzler <Carsten.Haitzler@arm.com> Signed-off-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by:
Christian König <christian.koenig@amd.com> Reviewed-by:
-
Daniel Vetter authored
Noticed while wondering what vboxvideo is using the ->master_set/drop hooks for. v2: Polish grammar a bit (Sam). Acked-by:
-
Daniel Vetter authored
The compiler already clears this for us. More important, someone might look what this is actually used for, and freak out about the dragon staring back at them. Reviewed-by:
-
- 05 Feb, 2019 6 commits
-
-
Lyude Paul authored
Atomic checks should never modify anything outside of the state that they're passed in. Unfortunately this appears to be exactly what we're doing in nv50_msto_atomic_check() where we update mstc->pbn every time the function is called. This hasn't caused any bugs yet, but it needs to be fixed in order to ensure that when committing an artificially duplicated state (like during system resume), that we reuse the PBN of that state to perform VCPI allocations and don't recalculate a different value from the drm connector's reported bpc. Also, move the VCPI slot allocations while we're at it as well. With this, removing a topology in suspend while using nouveau no longer causes the new atomic VCPI helpers to complain. Signed-off-by:
Ben Skeggs <bskeggs@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190202002023.29665-5-lyude@redhat.com
-
Lyude Paul authored
Since commit 39b50c60 ("drm/atomic_helper: Stop modesets on unregistered connectors harder") We've been failing atomic checks if they try to enable new displays on unregistered connectors. This is fine except for the one situation that breaks atomic assumptions: suspend/resume. If a connector is unregistered before we attempt to restore the atomic state, something we end up failing the atomic check that happens when trying to restore the state during resume. Normally this would be OK: we try our best to make sure that the atomic state pre-suspend can be restored post-suspend, but failures at that point usually don't cause problems. That is of course, until we introduced the new atomic MST VCPI helpers: [drm:drm_atomic_helper_check_modeset [drm_kms_helper]] [CRTC:65:pipe B] active changed [drm:drm_atomic_helper_check_modeset [drm_kms_helper]] Updating routing for [CONNECTOR:123:DP-5] [drm:drm_atomic_helper_check_modeset [drm_kms_helper]] Disabling [CONNECTOR:123:DP-5] [drm:drm_atomic_get_private_obj_state [drm]] Added new private object 0000000025844636 state 000000009fd2899a to 000000003a13d7b8 WARNING: CPU: 6 PID: 1070 at drivers/gpu/drm/drm_dp_mst_topology.c:3153 drm_dp_atomic_release_vcpi_slots+0xb9/0x200 [drm_kms_helper] Modules linked in: fuse vfat fat snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic joydev iTCO_wdt i915(O) wmi_bmof intel_rapl btusb btrtl x86_pkg_temp_thermal btbcm btintel coretemp i2c_algo_bit drm_kms_helper(O) crc32_pclmul snd_hda_intel syscopyarea sysfillrect snd_hda_codec sysimgblt snd_hda_core bluetooth fb_sys_fops snd_pcm pcspkr drm(O) psmouse snd_timer mei_me ecdh_generic i2c_i801 mei i2c_core ucsi_acpi typec_ucsi typec wmi thinkpad_acpi ledtrig_audio snd soundcore tpm_tis rfkill tpm_tis_core video tpm acpi_pad pcc_cpufreq uas usb_storage crc32c_intel nvme serio_raw xhci_pci nvme_core xhci_hcd CPU: 6 PID: 1070 Comm: gnome-shell Tainted: G W O 5.0.0-rc2Lyude-Test+ #1 Hardware name: LENOVO 20L8S2N800/20L8S2N800, BIOS N22ET35W (1.12 ) 04/09/2018 RIP: 0010:drm_dp_atomic_release_vcpi_slots+0xb9/0x200 [drm_kms_helper] Code: 00 4c 39 6d f0 74 49 48 8d 7b 10 48 89 f9 48 c1 e9 03 42 80 3c 21 00 0f 85 d2 00 00 00 48 8b 6b 10 48 8d 5d f0 49 39 ee 75 c5 <0f> 0b 48 c7 c7 c0 78 b3 a0 48 89 c2 4c 89 ee e8 03 6c aa ff b8 ea RSP: 0018:ffff88841235f268 EFLAGS: 00010246 RAX: ffff88841bf12ab0 RBX: ffff88841bf12aa8 RCX: 1ffff110837e2557 RDX: dffffc0000000000 RSI: 0000000000000000 RDI: ffffed108246bde0 RBP: ffff88841bf12ab8 R08: ffffed1083db3c93 R09: ffffed1083db3c92 R10: ffffed1083db3c92 R11: ffff88841ed9e497 R12: ffff888419555d80 R13: ffff8883bc499100 R14: ffff88841bf12ab8 R15: 0000000000000000 FS: 00007f16fbd4cd00(0000) GS:ffff88841ed80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f1687c9f000 CR3: 00000003ba3cc003 CR4: 00000000003606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: drm_atomic_helper_check_modeset+0xf21/0x2f50 [drm_kms_helper] ? drm_atomic_helper_commit_modeset_enables+0xa90/0xa90 [drm_kms_helper] ? __printk_safe_exit+0x10/0x10 ? save_stack+0x8c/0xb0 ? vprintk_func+0x96/0x1bf ? __printk_safe_exit+0x10/0x10 intel_atomic_check+0x234/0x4750 [i915] ? printk+0x9f/0xc5 ? kmsg_dump_rewind_nolock+0xd9/0xd9 ? _raw_spin_lock_irqsave+0xa4/0x140 ? drm_atomic_check_only+0xb1/0x28b0 [drm] ? drm_dbg+0x186/0x1b0 [drm] ? drm_dev_dbg+0x200/0x200 [drm] ? intel_link_compute_m_n+0xb0/0xb0 [i915] ? drm_mode_put_tile_group+0x20/0x20 [drm] ? skl_plane_format_mod_supported+0x17f/0x1b0 [i915] ? drm_plane_check_pixel_format+0x14a/0x310 [drm] drm_atomic_check_only+0x13c4/0x28b0 [drm] ? drm_state_info+0x220/0x220 [drm] ? drm_atomic_helper_disable_plane+0x1d0/0x1d0 [drm_kms_helper] ? pick_single_encoder_for_connector+0xe0/0xe0 [drm_kms_helper] ? kasan_unpoison_shadow+0x35/0x40 drm_atomic_commit+0x3b/0x100 [drm] drm_atomic_helper_set_config+0xd5/0x100 [drm_kms_helper] drm_mode_setcrtc+0x636/0x1660 [drm] ? vprintk_func+0x96/0x1bf ? drm_dev_dbg+0x200/0x200 [drm] ? drm_mode_getcrtc+0x790/0x790 [drm] ? printk+0x9f/0xc5 ? mutex_unlock+0x1d/0x40 ? drm_mode_addfb2+0x2e9/0x3a0 [drm] ? rcu_sync_dtor+0x2e0/0x2e0 ? drm_dbg+0x186/0x1b0 [drm] ? set_page_dirty+0x271/0x4d0 drm_ioctl_kernel+0x203/0x290 [drm] ? drm_mode_getcrtc+0x790/0x790 [drm] ? drm_setversion+0x7f0/0x7f0 [drm] ? __switch_to_asm+0x34/0x70 ? __switch_to_asm+0x34/0x70 drm_ioctl+0x445/0x950 [drm] ? drm_mode_getcrtc+0x790/0x790 [drm] ? drm_getunique+0x220/0x220 [drm] ? expand_files.part.10+0x920/0x920 do_vfs_ioctl+0x1a1/0x13d0 ? ioctl_preallocate+0x2b0/0x2b0 ? __fget_light+0x2d6/0x390 ? schedule+0xd7/0x2e0 ? fget_raw+0x10/0x10 ? apic_timer_interrupt+0xa/0x20 ? apic_timer_interrupt+0xa/0x20 ? rcu_cleanup_dead_rnp+0x2c0/0x2c0 ksys_ioctl+0x60/0x90 __x64_sys_ioctl+0x6f/0xb0 do_syscall_64+0x136/0x440 ? syscall_return_slowpath+0x2d0/0x2d0 ? do_page_fault+0x89/0x330 ? __do_page_fault+0x9c0/0x9c0 ? prepare_exit_to_usermode+0x188/0x200 ? perf_trace_sys_enter+0x1090/0x1090 ? __x64_sys_sigaltstack+0x280/0x280 ? __put_user_4+0x1c/0x30 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7f16ff89a09b Code: 0f 1e fa 48 8b 05 ed bd 0c 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff ff ff c3 66 0f 1f 44 00 00 f3 0f 1e fa b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d bd bd 0c 00 f7 d8 64 89 01 48 RSP: 002b:00007fff001232b8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 00007fff001232f0 RCX: 00007f16ff89a09b RDX: 00007fff001232f0 RSI: 00000000c06864a2 RDI: 000000000000000b RBP: 00007fff001232f0 R08: 0000000000000000 R09: 000055a79d484460 R10: 000055a79d44e770 R11: 0000000000000246 R12: 00000000c06864a2 R13: 000000000000000b R14: 0000000000000000 R15: 000055a79d44e770 WARNING: CPU: 6 PID: 1070 at drivers/gpu/drm/drm_dp_mst_topology.c:3153 drm_dp_atomic_release_vcpi_slots+0xb9/0x200 [drm_kms_helper] ---[ end trace d536c05c13c83be2 ]--- [drm:drm_dp_atomic_release_vcpi_slots [drm_kms_helper]] *ERROR* no VCPI for [MST PORT:00000000f9e2b143] found in mst state 000000009fd2899a This appears to be happening because we destroy the VCPI allocations when disabling all connected displays while suspending, and those VCPI allocations don't get restored on resume due to failing to restore the atomic state. So, fix this by introducing the suspending option to drm_atomic_helper_duplicate_state() and use that to indicate in the atomic state that it's being used for suspending or resuming the system, and thus needs to be fixed up by the driver. We can then use the new state->duplicated hook to tell update_connector_routing() in drm_atomic_check_modeset() to allow for modesets on unregistered connectors, which allows us to restore atomic states that contain MST topologies that were removed after the state was duplicated and thus: mostly fixing suspend and resume. This just leaves some issues that were introduced with nouveau, that will be addressed next. Changes since v3: * Remove ->duplicated hunks that I left in the VCPI helpers by accident. These don't need to be here, that was the supposed to be the purpose of the last revision Changes since v2: * Remove the changes in this patch to the VCPI helpers, they aren't needed anymore Changes since v1: * Rename suspend_or_resume to duplicated Signed-off-by:
-
Lyude Paul authored
Since we now have an easy way of refcounting drm_dp_mst_port structs and safely accessing their contents, there isn't any good reason to keep validating ports here. It doesn't prevent us from performing modesets on branch devices that have been removed either, and we already disallow enabling new displays on unregistered connectors in update_connector_routing() in drm_atomic_check_modeset(). All it does is cause us to have to make weird special exceptions in our atomic modesetting code. So, get rid of it entirely. Signed-off-by:
-
Lyude Paul authored
In drm_dp_mst_deallocate_vcpi(), we currently unconditionally call drm_dp_mst_put_port_malloc() on the port that's passed to us, even if we never successfully allocated VCPI to it. This is contrary to what we do in drm_dp_mst_allocate_vcpi(), where we only call drm_dp_mst_get_port_malloc() on the passed port if we successfully allocated VCPI to it. As a result, if drm_dp_mst_allocate_vcpi() fails during a modeset and another successive modeset calls drm_dp_mst_deallocate_vcpi() we will end up dropping someone else's malloc reference to the port. Example: [ 962.309260] ================================================================== [ 962.309290] BUG: KASAN: use-after-free in drm_dp_mst_put_port_malloc+0x72/0x180 [drm_kms_helper] [ 962.309296] Read of size 4 at addr ffff888416c30004 by task kworker/0:1H/500 [ 962.309308] CPU: 0 PID: 500 Comm: kworker/0:1H Tainted: G W O 5.0.0-rc2Lyude-Test+ #1 [ 962.309313] Hardware name: LENOVO 20L8S2N800/20L8S2N800, BIOS N22ET35W (1.12 ) 04/09/2018 [ 962.309428] Workqueue: events_highpri intel_atomic_cleanup_work [i915] [ 962.309434] Call Trace: [ 962.309452] dump_stack+0xad/0x150 [ 962.309462] ? dump_stack_print_info.cold.0+0x1b/0x1b [ 962.309472] ? kmsg_dump_rewind_nolock+0xd9/0xd9 [ 962.309504] ? drm_dp_mst_put_port_malloc+0x72/0x180 [drm_kms_helper] [ 962.309515] print_address_description+0x6c/0x23c [ 962.309542] ? drm_dp_mst_put_port_malloc+0x72/0x180 [drm_kms_helper] [ 962.309568] ? drm_dp_mst_put_port_malloc+0x72/0x180 [drm_kms_helper] [ 962.309577] kasan_report.cold.3+0x1a/0x32 [ 962.309605] ? drm_dp_mst_put_port_malloc+0x72/0x180 [drm_kms_helper] [ 962.309631] drm_dp_mst_put_port_malloc+0x72/0x180 [drm_kms_helper] [ 962.309658] ? drm_dp_mst_put_mstb_malloc+0x180/0x180 [drm_kms_helper] [ 962.309687] drm_dp_mst_destroy_state+0xcd/0x120 [drm_kms_helper] [ 962.309745] drm_atomic_state_default_clear+0x6ee/0xcc0 [drm] [ 962.309864] intel_atomic_state_clear+0xe/0x80 [i915] [ 962.309928] __drm_atomic_state_free+0x35/0xd0 [drm] [ 962.310044] intel_atomic_cleanup_work+0x56/0x70 [i915] [ 962.310057] process_one_work+0x884/0x1400 [ 962.310067] ? drain_workqueue+0x5a0/0x5a0 [ 962.310075] ? __schedule+0x87f/0x1e80 [ 962.310086] ? __sched_text_start+0x8/0x8 [ 962.310095] ? run_rebalance_domains+0x400/0x400 [ 962.310110] ? deref_stack_reg+0xb4/0x120 [ 962.310117] ? __read_once_size_nocheck.constprop.7+0x10/0x10 [ 962.310124] ? worker_enter_idle+0x47f/0x6a0 [ 962.310134] ? schedule+0xd7/0x2e0 [ 962.310141] ? __schedule+0x1e80/0x1e80 [ 962.310148] ? _raw_spin_lock_irq+0x9f/0x130 [ 962.310155] ? _raw_write_unlock_irqrestore+0x110/0x110 [ 962.310164] worker_thread+0x196/0x11e0 [ 962.310175] ? set_load_weight+0x2e0/0x2e0 [ 962.310181] ? __switch_to_asm+0x34/0x70 [ 962.310187] ? __switch_to_asm+0x40/0x70 [ 962.310194] ? process_one_work+0x1400/0x1400 [ 962.310199] ? __switch_to_asm+0x40/0x70 [ 962.310205] ? __switch_to_asm+0x34/0x70 [ 962.310211] ? __switch_to_asm+0x34/0x70 [ 962.310216] ? __switch_to_asm+0x40/0x70 [ 962.310221] ? __switch_to_asm+0x34/0x70 [ 962.310226] ? __switch_to_asm+0x40/0x70 [ 962.310231] ? __switch_to_asm+0x34/0x70 [ 962.310236] ? __switch_to_asm+0x40/0x70 [ 962.310242] ? syscall_return_via_sysret+0xf/0x7f [ 962.310248] ? __switch_to_asm+0x34/0x70 [ 962.310253] ? __switch_to_asm+0x40/0x70 [ 962.310258] ? __switch_to_asm+0x34/0x70 [ 962.310263] ? __switch_to_asm+0x40/0x70 [ 962.310268] ? __switch_to_asm+0x34/0x70 [ 962.310273] ? __switch_to_asm+0x40/0x70 [ 962.310281] ? __schedule+0x87f/0x1e80 [ 962.310292] ? __sched_text_start+0x8/0x8 [ 962.310300] ? save_stack+0x8c/0xb0 [ 962.310308] ? __kasan_kmalloc.constprop.6+0xc6/0xd0 [ 962.310313] ? kthread+0x98/0x3a0 [ 962.310318] ? ret_from_fork+0x35/0x40 [ 962.310334] ? __wake_up_common+0x178/0x6f0 [ 962.310343] ? _raw_spin_lock_irqsave+0xa4/0x140 [ 962.310349] ? __lock_text_start+0x8/0x8 [ 962.310355] ? _raw_write_lock_irqsave+0x70/0x130 [ 962.310360] ? __lock_text_start+0x8/0x8 [ 962.310371] ? process_one_work+0x1400/0x1400 [ 962.310376] kthread+0x2e2/0x3a0 [ 962.310383] ? kthread_create_on_node+0xc0/0xc0 [ 962.310389] ret_from_fork+0x35/0x40 [ 962.310401] Allocated by task 1462: [ 962.310410] __kasan_kmalloc.constprop.6+0xc6/0xd0 [ 962.310437] drm_dp_add_port+0xd60/0x1960 [drm_kms_helper] [ 962.310464] drm_dp_send_link_address+0x4b0/0x770 [drm_kms_helper] [ 962.310491] drm_dp_check_and_send_link_address+0x197/0x1f0 [drm_kms_helper] [ 962.310515] drm_dp_mst_link_probe_work+0x2b6/0x330 [drm_kms_helper] [ 962.310522] process_one_work+0x884/0x1400 [ 962.310529] worker_thread+0x196/0x11e0 [ 962.310533] kthread+0x2e2/0x3a0 [ 962.310538] ret_from_fork+0x35/0x40 [ 962.310543] Freed by task 500: [ 962.310550] __kasan_slab_free+0x133/0x180 [ 962.310555] kfree+0x92/0x1a0 [ 962.310581] drm_dp_mst_put_port_malloc+0x14d/0x180 [drm_kms_helper] [ 962.310693] intel_connector_destroy+0xb2/0xe0 [i915] [ 962.310747] drm_mode_object_put.part.0+0x12b/0x1a0 [drm] [ 962.310802] drm_atomic_state_default_clear+0x1f2/0xcc0 [drm] [ 962.310916] intel_atomic_state_clear+0xe/0x80 [i915] [ 962.310972] __drm_atomic_state_free+0x35/0xd0 [drm] [ 962.311083] intel_atomic_cleanup_work+0x56/0x70 [i915] [ 962.311092] process_one_work+0x884/0x1400 [ 962.311098] worker_thread+0x196/0x11e0 [ 962.311103] kthread+0x2e2/0x3a0 [ 962.311108] ret_from_fork+0x35/0x40 [ 962.311116] The buggy address belongs to the object at ffff888416c30000 which belongs to the cache kmalloc-2k of size 2048 [ 962.311122] The buggy address is located 4 bytes inside of 2048-byte region [ffff888416c30000, ffff888416c30800) [ 962.311124] The buggy address belongs to the page: [ 962.311132] page:ffffea00105b0c00 count:1 mapcount:0 mapping:ffff88841d003040 index:0x0 compound_mapcount: 0 [ 962.311142] flags: 0x8000000000010200(slab|head) [ 962.311152] raw: 8000000000010200 dead000000000100 dead000000000200 ffff88841d003040 [ 962.311159] raw: 0000000000000000 00000000000f000f 00000001ffffffff 0000000000000000 [ 962.311162] page dumped because: kasan: bad access detected So, bail early if drm_dp_mst_deallocate_vcpi() is called on a port with no VCPI allocation. Additionally, clean up the surrounding kerneldoc while we're at it since the port is assumed to be kept around because the DRM driver is expected to hold a malloc reference to it, not just us. Changes since v1: * Doc changes - danvet Signed-off-by: -
Gerd Hoffmann authored
ttm_fbdev_mmap() just doesn't work. It appears to work fine, mmap() returns success, but any attempt to actually access the mapping causes a SIGBUS. We can just use drm_gem_prime_mmap() instead. Almost. We have to copy over the start offset from the ttm_buffer_object vm_node to the drm_gem_object vm_node so the offset math in drm_gem_prime_mmap() works correctly for us even though we use ttm to manage our objects. Signed-off-by:
Gerd Hoffmann <kraxel@redhat.com> Reviewed-by:
-
Gerd Hoffmann authored
Commit "f4bd542b drm/fb-helper: Scale back depth to supported maximum" uncovered a bug in the cirrus driver. It must create its own primary plane, using the correct format list, depending on the bpp module parameter, so it is consistent with mode_config->preferred_depth. Signed-off-by:
-
- 04 Feb, 2019 3 commits
-
-
Matt Roper authored
Most of these are just cases where code comments used contractions (it's, who's) where they actually mean to use a possessive pronoun (its, whose) or vice-versa. Signed-off-by:
Matt Roper <matthew.d.roper@intel.com> Signed-off-by:
-
Oleksandr Andrushchenko authored
When GEM backing storage is allocated those are normal pages, so there is no point using pgprot_writecombine while mmaping. This fixes mismatch of buffer pages' memory attributes between the frontend and backend which may cause screen artifacts. Fixes: c575b7ee ("drm/xen-front: Add support for Xen PV display frontend") Signed-off-by:
Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com> Suggested-by:
Julien Grall <julien.grall@arm.com> Acked-by:
-
YueHaibing authored
There is no need to have the 'struct drm_framebuffer *fb' variable static since new value always be assigned before use it. Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Reviewed-by:
-
- 03 Feb, 2019 3 commits
-
-
Shayenne Moura authored
When the vblank irq happens, kernel time subsystem executes `vkms_vblank_simulate`. In parallel or not, it prepares all stuff necessary to the next vblank with arm, and it must flush these stuff before the next vblank irq. However, vblank counter is ahead when arm is executed in parallel with handle vblank. CPU 0: CPU 1: | | atomic_commit_tail is ongoing | | | | hrtimer: vkms_vblank_simulate() | | | drm_crtc_handle_vblank() | | drm_crtc_arm_vblank() | | | ->get_vblank_timestamp() | | | | hrtimer_forward_now() Then, we should guarantee that the vblank interval time is correct (not changed) before finish the vblank handle. Fix the bug including the call to `hrtimer_forward_now()` in the same lock of `drm_crtc_handle_vblank()` to ensure that the timestamp update is correct when finish the vblank handle. Signed-off-by:
Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com> Signed-off-by:
-
Shayenne Moura authored
kms_flip tests are breaking on vkms when simulate vblank because vblank event sequence count returns one extra frame after arm vblank event to make a page flip. When vblank interrupt happens, userspace processes the vblank event and issues the next page flip command. Kernel calls queue_work to call commit_planes and arm the new page flip. The next vblank picks up the newly armed vblank event and vblank interrupt happens again. The arm and vblank event are asynchronous, then, on the next vblank, we receive x+2 from `get_vblank_timestamp`, instead x+1, although timestamp and vblank seqno matches. Function `get_vblank_timestamp` is reached by 2 ways: - from `drm_mode_page_flip_ioctl`: driver is doing one atomic operation to synchronize planes in the same output. There is no vblank simulation, the `drm_crtc_arm_vblank_event` function adds 1 on vblank count, and the variable in_vblank_irq is false - from `vkms_vblank_simulate`: since the driver is doing a vblank simulation, the variable in_vblank_irq is true. Fix this problem subtracting one vblank period from vblank_time when `get_vblank_timestamp` is called from trace `drm_mode_page_flip_ioctl`, i.e., is not a real vblank interrupt, and getting the timestamp and vblank seqno when it is a real vblank interrupt. The reason for all this is that get_vblank_timestamp always supplies the timestamp for the next vblank event. The hrtimer is the vblank simulator, and it needs the correct previous value to present the next vblank. Since this is how hw timestamp registers work and what the vblank core expects. Signed-off-by: -
Heiko Stuebner authored
This is a panel handled through the generic lvds-panel binding, so only needs its additional compatible specified. Signed-off-by:
Heiko Stuebner <heiko.stuebner@bq.com> Reviewed-by:
Rob Herring <robh@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20181113124205.29319-1-heiko@sntech.de
-
- 01 Feb, 2019 4 commits
-
-
Neil Armstrong authored
In order to support the HDMI2.0 YUV420 display modes, this patch adds support for the YUV420 TMDS Clock divided by 2 and the controller passthrough mode. YUV420 Synopsys PHY support will need some specific configuration table to support theses modes. This patch is based on work from Zheng Yang <zhengyang@rock-chips.com> in the Rockchip Linux 4.4 BSP at [1] [1] https://github.com/rockchip-linux/kernel/tree/release-4.4 Cc: Zheng Yang <zhengyang@rock-chips.com> Signed-off-by:
Neil Armstrong <narmstrong@baylibre.com> Tested-by:
Heiko Stuebner <heiko@sntech.de> Reviewed-by:
Andrzej Hajda <a.hajda@samsung.com> Signed-off-by:
-
Neil Armstrong authored
Now we support the TMDS Clock > 3.4GHz and support the SCDC Control operation in the DW-HDMI Controller, we can enable support for the HDMI2.0 3840x2160@60/50 RGB444 display modes. Signed-off-by:
-
Neil Armstrong authored
Add support for TMDS Clock > 3.4GHz for HDMI2.0 display modes. Signed-off-by:
-
Neil Armstrong authored
Add support for SCDC Setup for TMDS Clock > 3.4GHz and enable TMDS Scrambling when supported or mandatory. This patch also adds an helper to setup the control bit to support the high TMDS Bit Period/TMDS Clock-Period Ratio as required with TMDS Clock > 3.4GHz for HDMI2.0 3840x2160@60/50 modes. These changes were based on work done by Huicong Xu <xhc@rock-chips.com> and Nickey Yang <nickey.yang@rock-chips.com> to support HDMI2.0 modes on the Rockchip 4.4 BSP kernel at [1] [1] https://github.com/rockchip-linux/kernel/tree/release-4.4 Cc: Nickey Yang <nickey.yang@rock-chips.com> Cc: Huicong Xu <xhc@rock-chips.com> Signed-off-by:
-
- 31 Jan, 2019 1 commit
-
-
Sean Paul authored
Drivers shouldn't be using these values, add a TODO so someone removes them. Changes in v2: - Add drm_display_mode.vrefresh removal (Ville) - Add Sam's R-b and bonus points Changes in v3: - Add hsync removal todo item (Daniel) - Change vrefresh wording to make removal less optional Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Suggested-by:
Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190129192637.73296-1-sean@poorly.run
-
- 30 Jan, 2019 5 commits
-
-
Ville Syrjälä authored
Decode the NAK reply fields to make it easier to parse the logs. v2: s/STR/DP_STR/ to avoid conflict with some header stuff (0day) Use drm_dp_mst_req_type_str() more (DK) Signed-off-by:Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190122200301.18633-2-ville.syrjala@linux.intel.com
-
Ville Syrjälä authored
Make the code a bit easier to read by providing symbolic names for the reply_type (ACK vs. NAK). Also clean up some brace stuff while at it. v2: s/DP_REPLY/DP_SIDEBAND_REPLY/ (DK) Fix some checkpatch issues Signed-off-by: -
Daniel Vetter authored
It only talks about crtc, brings up intel as an example and I think is more misleading than useful really. Plus we have lots of discussion about how your standard kms driver should be initialized/cleaned up, so maybe better to document this when we have a better idea. v2: Fix typo in commit message (Nicholas). Reviewed-by:
Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by:
-
Daniel Vetter authored
.. next to all the other sink helpers. The rect library is more used for handling plane clipping, so belongs to those imo. Reviewed-by:
-
Daniel Vetter authored
I'm kinda fed up explaining why the have a confusing name :-) v2: Fix typo that Eric Engestrom spotted. Cc: Noralf Trønnes <noralf@tronnes.org> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by:
Noralf Trønnes <noralf@tronnes.org> Acked-by:
-
