- 12 May, 2019 3 commits
-
-
Vladimir Oltean authored
It's best to not expose this, due to the performance hit it may cause when calling it. Fixes: b68b0dd0 ("net: dsa: Keep private info in the skb->cb") Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Vladimir Oltean authored
This does not cause any bug now because it has no users, but its body contains two pointer definitions within a code block: struct sk_buff *clone = _clone; \ struct sk_buff *skb = _skb; \ When calling the macro as DSA_SKB_CLONE(clone, skb), these variables would obscure the arguments that the macro was called with, and the initializers would be a no-op instead of doing their job (undefined behavior, by the way, but GCC nicely puts NULL pointers instead). So simply remove this broken macro and leave users to simply call "DSA_SKB_CB(skb)->clone = clone" by hand when needed. There is one functional difference when doing what I just suggested above: the control block won't be transferred from the original skb into the clone. Since there's no foreseen need for the control block in the clone ATM, this is ok. Fixes: b68b0dd0 ("net: dsa: Keep private info in the skb->cb") Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Vladimir Oltean authored
The sk_buff control block can have any contents on xmit put there by the stack, so initialization is mandatory, since we are checking its value after the actual DSA xmit (the tagger may have changed it). The DSA_SKB_ZERO() macro could have been used for this purpose, but: - Zeroizing a 48-byte memory region in the hotpath is best avoided. - It would have triggered a warning with newer compilers since __dsa_skb_cb contains a structure within a structure, and the {0} initializer was incorrect for that purpose. So simply remove the DSA_SKB_ZERO() macro and initialize the deferred_xmit variable by hand (which should be done for all further dsa_skb_cb variables which need initialization - currently none - to avoid the performance penalty). Fixes: 97a69a0d ("net: dsa: Add support for deferred xmit") Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 11 May, 2019 2 commits
-
-
Heiner Kallweit authored
When adding missing callbacks I missed that one had them set already. Interesting that the compiler didn't complain. Fixes: daf3ddbe ("net: phy: realtek: add missing page operations") Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Nicholas Mc Guire authored
sparse was unable to verify endiannes correctness due to reassignment from le32_to_cpu to the same variable - fix this warning up by providing a proper __le32 type and initializing it. This is not actually fixing any bug - rather just addressing the sparse warning. Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 10 May, 2019 15 commits
-
-
Heiner Kallweit authored
Add missing page operation callbacks to few Realtek drivers. This also fixes a NPE after the referenced commit added code to the RTL8211E driver that uses phy_select_page(). Fixes: f81dadbc ("net: phy: realtek: Add rtl8211e rx/tx delays config") Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reported-by: Vicente Bergas <vicencb@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Petr Štetiar says: ==================== of_get_mac_address fixes this patch series is hopefuly the last series of the fixes which are related to the introduction of NVMEM support into of_get_mac_address. First patch is removing `nvmem-mac-address` property which was wrong idea as I've allocated the property with devm_kzalloc and then added it to DT, so then 2 entities would be refcounting the allocation. So if the driver unbinds, the buffer is freed, but DT code would be still referencing that memory. Second patch fixes some unwanted references to the Linux API in the DT bindings documentation. Patches 3-5 should hopefully make compilers and thus kbuild test robot happy. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Petr Štetiar authored
This patch fixes following (similar) warning reported by kbuild test robot: In function ‘memcpy’, inlined from ‘smsc75xx_init_mac_address’ at drivers/net/usb/smsc75xx.c:778:3, inlined from ‘smsc75xx_bind’ at drivers/net/usb/smsc75xx.c:1501:2: ./include/linux/string.h:355:9: warning: argument 2 null where non-null expected [-Wnonnull] return __builtin_memcpy(p, q, size); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/net/usb/smsc75xx.c: In function ‘smsc75xx_bind’: ./include/linux/string.h:355:9: note: in a call to built-in function ‘__builtin_memcpy’ I've replaced the offending memcpy with ether_addr_copy, because I'm 100% sure, that of_get_mac_address can't return NULL as it returns valid pointer or ERR_PTR encoded value, nothing else. I'm hesitant to just change IS_ERR into IS_ERR_OR_NULL check, as this would make the warning disappear also, but it would be confusing to check for impossible return value just to make a compiler happy. I'm now changing all occurencies of memcpy to ether_addr_copy after the of_get_mac_address call, as it's very likely, that we're going to get similar reports from kbuild test robot in the future. Fixes: d31a36b5 ("net: wireless: support of_get_mac_address new ERR_PTR error") Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Petr Štetiar <ynezz@true.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Petr Štetiar authored
This patch fixes following (similar) warning reported by kbuild test robot: In function ‘memcpy’, inlined from ‘smsc75xx_init_mac_address’ at drivers/net/usb/smsc75xx.c:778:3, inlined from ‘smsc75xx_bind’ at drivers/net/usb/smsc75xx.c:1501:2: ./include/linux/string.h:355:9: warning: argument 2 null where non-null expected [-Wnonnull] return __builtin_memcpy(p, q, size); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/net/usb/smsc75xx.c: In function ‘smsc75xx_bind’: ./include/linux/string.h:355:9: note: in a call to built-in function ‘__builtin_memcpy’ I've replaced the offending memcpy with ether_addr_copy, because I'm 100% sure, that of_get_mac_address can't return NULL as it returns valid pointer or ERR_PTR encoded value, nothing else. I'm hesitant to just change IS_ERR into IS_ERR_OR_NULL check, as this would make the warning disappear also, but it would be confusing to check for impossible return value just to make a compiler happy. I'm now changing all occurencies of memcpy to ether_addr_copy after the of_get_mac_address call, as it's very likely, that we're going to get similar reports from kbuild test robot in the future. Fixes: a51645f7 ("net: ethernet: support of_get_mac_address new ERR_PTR error") Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Petr Štetiar <ynezz@true.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Petr Štetiar authored
This patch fixes following (similar) warning reported by kbuild test robot: In function ‘memcpy’, inlined from ‘smsc75xx_init_mac_address’ at drivers/net/usb/smsc75xx.c:778:3, inlined from ‘smsc75xx_bind’ at drivers/net/usb/smsc75xx.c:1501:2: ./include/linux/string.h:355:9: warning: argument 2 null where non-null expected [-Wnonnull] return __builtin_memcpy(p, q, size); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/net/usb/smsc75xx.c: In function ‘smsc75xx_bind’: ./include/linux/string.h:355:9: note: in a call to built-in function ‘__builtin_memcpy’ I've replaced the offending memcpy with ether_addr_copy, because I'm 100% sure, that of_get_mac_address can't return NULL as it returns valid pointer or ERR_PTR encoded value, nothing else. I'm hesitant to just change IS_ERR into IS_ERR_OR_NULL check, as this would make the warning disappear also, but it would be confusing to check for impossible return value just to make a compiler happy. I'm now changing all occurencies of memcpy to ether_addr_copy after the of_get_mac_address call, as it's very likely, that we're going to get similar reports from kbuild test robot in the future. Fixes: ea168cdf ("powerpc: tsi108: support of_get_mac_address new ERR_PTR error") Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Petr Štetiar <ynezz@true.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Petr Štetiar authored
In commit 687e3d55 ("dt-bindings: doc: reflect new NVMEM of_get_mac_address behaviour") I've kept or added references to Linux of_get_mac_address API which is unwanted so this patch fixes that by removing those references. Fixes: 687e3d55 ("dt-bindings: doc: reflect new NVMEM of_get_mac_address behaviour") Suggested-by: Rob Herring <robh@kernel.org> Signed-off-by: Petr Štetiar <ynezz@true.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Petr Štetiar authored
In commit d01f449c ("of_net: add NVMEM support to of_get_mac_address") I've added `nvmem-mac-address` property which was wrong idea as I've allocated the property with devm_kzalloc and then added it to DT, so then 2 entities would be refcounting the allocation. So if the driver unbinds, the buffer is freed, but DT code would be still referencing that memory. I'm removing this property completely instead of fixing it, as it's not needed to have it. Fixes: d01f449c ("of_net: add NVMEM support to of_get_mac_address") Suggested-by: Rob Herring <robh@kernel.org> Signed-off-by: Petr Štetiar <ynezz@true.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Thomas Falcon authored
Only set the device carrier state to on after receiving an up link state indication from the underlying adapter. Likewise, if a down link indication is receieved, update the carrier state accordingly. This fix ensures that accurate carrier state is reported by the driver following a link state update by the underlying adapter. Signed-off-by: Thomas Falcon <tlfalcon@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Thomas Falcon authored
It was discovered in testing that the underlying hardware MAC address will revert to initial settings following a device reset, but the driver fails to resend the current OS MAC settings. This oversight can result in dropped packets should the scenario occur. Fix this by informing hardware of current MAC address settings following any adapter initialization or resets. Signed-off-by: Thomas Falcon <tlfalcon@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
YueHaibing authored
Fix gcc build error: net/dsa/tag_brcm.c:211:16: error: brcm_prepend_netdev_ops undeclared here (not in a function); did you mean brcm_netdev_ops? DSA_TAG_DRIVER(brcm_prepend_netdev_ops); ^ ./include/net/dsa.h:708:10: note: in definition of macro DSA_TAG_DRIVER .ops = &__ops, \ ^~~~~ ./include/net/dsa.h:701:36: warning: dsa_tag_driver_brcm_prepend_netdev_ops defined but not used [-Wunused-variable] #define DSA_TAG_DRIVER_NAME(__ops) dsa_tag_driver ## _ ## __ops ^ ./include/net/dsa.h:707:30: note: in expansion of macro DSA_TAG_DRIVER_NAME static struct dsa_tag_driver DSA_TAG_DRIVER_NAME(__ops) = { \ ^~~~~~~~~~~~~~~~~~~ net/dsa/tag_brcm.c:211:1: note: in expansion of macro DSA_TAG_DRIVER DSA_TAG_DRIVER(brcm_prepend_netdev_ops); Like the CONFIG_NET_DSA_TAG_BRCM case, brcm_prepend_netdev_ops and DSA_TAG_PROTO_BRCM_PREPEND should be wrappeed by CONFIG_NET_DSA_TAG_BRCM_PREPEND. Reported-by: Hulk Robot <hulkci@huawei.com> Fixes: b74b70c4 ("net: dsa: Support prepended Broadcom tag") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Tobin C. Harding authored
Currently error return from kobject_init_and_add() is not followed by a call to kobject_put(). This means there is a memory leak. We currently set p to NULL so that kfree() may be called on it as a noop, the code is arguably clearer if we move the kfree() up closer to where it is called (instead of after goto jump). Remove a goto label 'err1' and jump to call to kobject_put() in error return from kobject_init_and_add() fixing the memory leak. Re-name goto label 'put_back' to 'err1' now that we don't use err1, following current nomenclature (err1, err2 ...). Move call to kfree out of the error code at bottom of function up to closer to where memory was allocated. Add comment to clarify call to kfree(). Signed-off-by: Tobin C. Harding <tobin@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Paolo Abeni authored
This reverts commit c7e0d6cc. It was agreed a slightly different fix via the selinux tree. v1 -> v2: - use the correct reverted commit hash Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/powerpc/linuxLinus Torvalds authored
Pull powerpc updates from Michael Ellerman: "Slightly delayed due to the issue with printk() calling probe_kernel_read() interacting with our new user access prevention stuff, but all fixed now. The only out-of-area changes are the addition of a cpuhp_state, small additions to Documentation and MAINTAINERS updates. Highlights: - Support for Kernel Userspace Access/Execution Prevention (like SMAP/SMEP/PAN/PXN) on some 64-bit and 32-bit CPUs. This prevents the kernel from accidentally accessing userspace outside copy_to/from_user(), or ever executing userspace. - KASAN support on 32-bit. - Rework of where we map the kernel, vmalloc, etc. on 64-bit hash to use the same address ranges we use with the Radix MMU. - A rewrite into C of large parts of our idle handling code for 64-bit Book3S (ie. power8 & power9). - A fast path entry for syscalls on 32-bit CPUs, for a 12-17% speedup in the null_syscall benchmark. - On 64-bit bare metal we have support for recovering from errors with the time base (our clocksource), however if that fails currently we hang in __delay() and never crash. We now have support for detecting that case and short circuiting __delay() so we at least panic() and reboot. - Add support for optionally enabling the DAWR on Power9, which had to be disabled by default due to a hardware erratum. This has the effect of enabling hardware breakpoints for GDB, the downside is a badly behaved program could crash the machine by pointing the DAWR at cache inhibited memory. This is opt-in obviously. - xmon, our crash handler, gets support for a read only mode where operations that could change memory or otherwise disturb the system are disabled. Plus many clean-ups, reworks and minor fixes etc. Thanks to: Christophe Leroy, Akshay Adiga, Alastair D'Silva, Alexey Kardashevskiy, Andrew Donnellan, Aneesh Kumar K.V, Anju T Sudhakar, Anton Blanchard, Ben Hutchings, Bo YU, Breno Leitao, Cédric Le Goater, Christopher M. Riedl, Christoph Hellwig, Colin Ian King, David Gibson, Ganesh Goudar, Gautham R. Shenoy, George Spelvin, Greg Kroah-Hartman, Greg Kurz, Horia Geantă, Jagadeesh Pagadala, Joel Stanley, Joe Perches, Julia Lawall, Laurentiu Tudor, Laurent Vivier, Lukas Bulwahn, Madhavan Srinivasan, Mahesh Salgaonkar, Mathieu Malaterre, Michael Neuling, Mukesh Ojha, Nathan Fontenot, Nathan Lynch, Nicholas Piggin, Nick Desaulniers, Oliver O'Halloran, Peng Hao, Qian Cai, Ravi Bangoria, Rick Lindsley, Russell Currey, Sachin Sant, Stewart Smith, Sukadev Bhattiprolu, Thomas Huth, Tobin C. Harding, Tyrel Datwyler, Valentin Schneider, Wei Yongjun, Wen Yang, YueHaibing" * tag 'powerpc-5.2-1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (205 commits) powerpc/64s: Use early_mmu_has_feature() in set_kuap() powerpc/book3s/64: check for NULL pointer in pgd_alloc() powerpc/mm: Fix hugetlb page initialization ocxl: Fix return value check in afu_ioctl() powerpc/mm: fix section mismatch for setup_kup() powerpc/mm: fix redundant inclusion of pgtable-frag.o in Makefile powerpc/mm: Fix makefile for KASAN powerpc/kasan: add missing/lost Makefile selftests/powerpc: Add a signal fuzzer selftest powerpc/booke64: set RI in default MSR ocxl: Provide global MMIO accessors for external drivers ocxl: move event_fd handling to frontend ocxl: afu_irq only deals with IRQ IDs, not offsets ocxl: Allow external drivers to use OpenCAPI contexts ocxl: Create a clear delineation between ocxl backend & frontend ocxl: Don't pass pci_dev around ocxl: Split pci.c ocxl: Remove some unused exported symbols ocxl: Remove superfluous 'extern' from headers ocxl: read_pasid never returns an error, so make it void ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull vfs mount fix from Al Viro: "Fix for umount -l/mount --move race caught by syzbot yesterday..." * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: do_move_mount(): fix an unsafe use of is_anon_ns()
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: "Several bug fixes, many are quick merge-window regression cures: - When NLM_F_EXCL is not set, allow same fib rule insertion. From Hangbin Liu. - Several cures in sja1105 DSA driver (while loop exit condition fix, return of negative u8, etc.) from Vladimir Oltean. - Handle tx/rx delays in realtek PHY driver properly, from Serge Semin. - Double free in cls_matchall, from Pieter Jansen van Vuuren. - Disable SIOCSHWTSTAMP in macvlan/vlan containers, from Hangbin Liu. - Endainness fixes in aqc111, from Oliver Neukum. - Handle errors in packet_init properly, from Haibing Yue. - Various W=1 warning fixes in kTLS, from Jakub Kicinski" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (34 commits) nfp: add missing kdoc net/tls: handle errors from padding_length() net/tls: remove set but not used variables docs/btf: fix the missing section marks nfp: bpf: fix static check error through tightening shift amount adjustment selftests: bpf: initialize bpf_object pointers where needed packet: Fix error path in packet_init net/tcp: use deferred jump label for TCP acked data hook net: aquantia: fix undefined devm_hwmon_device_register_with_info reference aqc111: fix double endianness swap on BE aqc111: fix writing to the phy on BE aqc111: fix endianness issue in aqc111_change_mtu vlan: disable SIOCSHWTSTAMP in container macvlan: disable SIOCSHWTSTAMP in container tipc: fix hanging clients using poll with EPOLLOUT flag tuntap: synchronize through tfiles array instead of tun->numqueues tuntap: fix dividing by zero in ebpf queue selection dwmac4_prog_mtl_tx_algorithms() missing write operation ptp_qoriq: fix NULL access if ptp dt node missing net/sched: avoid double free on matchall reoffload ...
-
- 09 May, 2019 20 commits
-
-
Jakub Kicinski authored
Add missing kdoc for app member. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Jakub Kicinski says: ==================== net/tls: fix W=1 build warnings This small series cleans up two outstanding W=1 build warnings in tls code. Both are set but not used variables. The first case looks fairly straightforward. In the second I think it's better to propagate the error code, even if not doing some does not lead to a crash with current code. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
At the time padding_length() is called the record header is still part of the message. If malicious TLS 1.3 peer sends an all-zero record padding_length() will stop at the record header, and return full length of the data including the tail_size. Subsequent subtraction of prot->overhead_size from rxm->full_len will cause rxm->full_len to turn negative. skb accessors, however, will always catch resulting out-of-bounds operation, so in practice this fix comes down to returning the correct error code. It also fixes a set but not used warning. This code was added by commit 130b392c ("net: tls: Add tls 1.3 support"). CC: Dave Watson <davejwatson@fb.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
Commit 4504ab0e ("net/tls: Inform user space about send buffer availability") made us report write_space regardless whether partial record push was successful or not. Remove the now unused return value to clean up the following W=1 warning: net/tls/tls_device.c: In function ‘tls_device_write_space’: net/tls/tls_device.c:546:6: warning: variable ‘rc’ set but not used [-Wunused-but-set-variable] int rc = 0; ^~ CC: Vakul Garg <vakul.garg@nxp.com> CC: Boris Pismenny <borisp@mellanox.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller authored
Alexei Starovoitov says: ==================== pull-request: bpf 2019-05-09 The following pull-request contains BPF updates for your *net* tree. The main changes are: 1) three small fixes from Gary, Jiong and Lorenz. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Gary Lin authored
The section titles of 3.4 and 3.5 are not marked correctly. Signed-off-by: Gary Lin <glin@suse.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
-
Jiong Wang authored
NFP shift instruction has something special. If shift direction is left then shift amount of 1 to 31 is specified as 32 minus the amount to shift. But no need to do this for indirect shift which has shift amount be 0. Even after we do this subtraction, shift amount 0 will be turned into 32 which will eventually be encoded the same as 0 because only low 5 bits are encoded, but shift amount be 32 will fail the FIELD_PREP check done later on shift mask (0x1f), due to 32 is out of mask range. Such error has been observed when compiling nfp/bpf/jit.c using gcc 8.3 + O3. This issue has started when indirect shift support added after which the incoming shift amount to __emit_shf could be 0, therefore it is at that time shift amount adjustment inside __emit_shf should have been tightened. Fixes: 991f5b36 ("nfp: bpf: support logic indirect shifts (BPF_[L|R]SH | BPF_X)") Reported-by: Oleksandr Natalenko <oleksandr@natalenko.name> Reported-by: Pablo Cascón <pablo.cascon@netronome.com Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Jiong Wang <jiong.wang@netronome.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
-
Lorenz Bauer authored
There are a few tests which call bpf_object__close on uninitialized bpf_object*, which may segfault. Explicitly zero-initialise these pointers to avoid this. Signed-off-by: Lorenz Bauer <lmb@cloudflare.com> Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparcLinus Torvalds authored
Pull sparc updates from David Miller: "Here we go: - Fix various long standing issues in the sparc 32-bit IOMMU support code, from Christoph Hellwig. - Various other code cleanups and simplifications all over. From Gustavo A. R. Silva, Jagadeesh Pagadala, Masahiro Yamada, Mauro Carvalho Chehab, Mike Rapoport" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc: sparc64: simplify reduce_memory() function sparc: use struct_size() in kzalloc() docs: sparc: convert to ReST sparc/iommu: merge iommu_get_one and __sbus_iommu_map_page sparc/iommu: use __sbus_iommu_map_page to implement the map_sg path sparc/iommu: fix __sbus_iommu_map_page for highmem pages sparc/iommu: move per-page flushing into __sbus_iommu_map_page sparc/iommu: pass a physical address to iommu_get_one sparc/iommu: create a common helper for map_sg sparc/iommu: merge iommu_release_one and sbus_iommu_unmap_page sparc/iommu: use sbus_iommu_unmap_page in sbus_iommu_unmap_sg sparc/iommu: use !PageHighMem to check if a page has a kernel mapping sparc: vdso: add FORCE to the build rule of %.so arch:sparc:kernel/uprobes.c : Remove duplicate header
-
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linuxLinus Torvalds authored
Pull clk framework updates from Stephen Boyd: "We have a couple new features and changes in the core clk framework this time around because we've finally gotten around to fixing some long standing issues. There's still work to do though, so this pull request is largely laying down the foundation for all the driver changes to come in the next merge window. The first problem we're alleviating is how parents of clks are specified. With the new method, we should see lots of drivers migrate away from the current design of string comparisons on the entire clk tree to a more direct method where they can use clk_hw pointers or more localized names specified in DT or via clkdev. This should reduce our reliance on string comparisons for all the topology description logic that we've been using for years and hopefully speed some things up while avoiding problems we have with generating clk names. Beyond that we also got rid of the CLK_IS_BASIC flag because it wasn't really helping anyone and we introduced big-endian versions of the basic clk types so that we can get rid of clk_{readl,writel}(). Both of these are things that driver developers have tried to use over the years that I typically bat away during code reviews because they're not useful. It's great to see these two things go away so maintainers can save time not worrying about these things. On the driver side we got the usual collection of new SoC support and non-critical fixes and updates to existing code. The big topics that stand out are the new driver support for Mediatek MT8183 and MT8516 SoCs, Amlogic Meson8b and G12a SoCs, and the SiFive FU540 SoC. The other patches in the driver pile are mostly fixes for things that are being used for the first time or additions for clks that couldn't be tested before because there wasn't a consumer driver that exercised them. Details are below and also in the sub-maintainer tags. Core: - Remove clk_readl() and introduce BE versions of basic clk types - Rewrite how clk parents can be specified to allow DT/clkdev lookups - Removal of the CLK_IS_BASIC clk flag - Framework documentation updates and fixes New Drivers: - Support for STM32F769 - AT91 sam9x60 PMC support - SiFive FU540 PRCI and PLL support - Qualcomm QCS404 CDSP clk support - Qualcomm QCS404 Turing clk support - Mediatek MT8183 clock support - Mediatek MT8516 clock support - Milbeaut M10V clk controller support - Support for Cirrus Logic Lochnagar clks Updates: - Rework AT91 sckc DT bindings - Fix slow RC oscillator issue on sama5d3 - Mark UFS clk as critical on Hi-Silicon hi3660 SoCs - Various static analysis fixes/finds and const markings - Video Engine (ECLK) support on Aspeed SoCs - Xilinx ZynqMP Versal platform support - Convert Xilinx ZynqMP driver to be struct oriented - Fixes for Rockchip rk3328 and rk3288 SoCs - Sub-type for Rockchip SoCs where mux and divider aren't a single register - Remove SNVS clock from i.MX7UPL clock driver and bindings - Improve i.MX5 clock driver for i.MX50 support - Addition of ADC clock definition for Exynos 5410 SoC (Odroid XU) - Export a new clock for the MBUS controller on the A13 - Allwinner H6 fixes to support a finer clocking of the video and VPU engines - Add g12a support in the Amlogic axg audio clock controller - Add missing PCI USB clock on Rensas RZ/N1 - Add Z2 (Cortex-A53) clocks on Rensas R-Car E3 and RZ/G2E - A new helper DIV64_U64_ROUND_CLOSEST() in <linux/math64.h> - VPU and Video Decoder clocks on Amlogic Meson8b - Finally remove the wrong ABP Meson8b clock id - Add Video Decoder, PCIe PLL, and CPU Clocks on Amlogic G12A - Re-expose SAR_ADC_SEL and CTS_OSCIN on Amlogic G12A AO clock controller - Un-expose some Amlogic AXG-Audio input clocks IDs" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (172 commits) clk: Cache core in clk_fetch_parent_index() without names clk: imx: correct pfdv2 gate_bit/vld_bit operations clk: sifive: add a driver for the SiFive FU540 PRCI IP block clk: analogbits: add Wide-Range PLL library clk: imx: clk-pllv3: mark expected switch fall-throughs clk: imx8mq: Add dsi_ipg_div clk: imx: pllv4: add fractional-N pll support clk: sunxi-ng: Use the correct style for SPDX License Identifier clk: sprd: Use the correct style for SPDX License Identifier clk: renesas: Use the correct style for SPDX License Identifier clk: qcom: Use the correct style for SPDX License Identifier clk: davinci: Use the correct style for SPDX License Identifier clk: actions: Use the correct style for SPDX License Identifier clk: imx: keep uart clock on during system boot clk: imx: correct i.MX7D AV PLL num/denom offset dt-bindings: clk: add documentation for the SiFive PRCI driver clk: stm32mp1: Add ddrperfm clock clk: Remove CLK_IS_BASIC clk flag clock: milbeaut: Add Milbeaut M10V clock controller dt-bindings: clock: milbeaut: add Milbeaut clock description ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linuxLinus Torvalds authored
Pull RTC updates from Alexandre Belloni: "A huge series from me this cycle. I went through many drivers to set the date and time range supported by the RTC which helps solving HW limitation when the time comes (as early as next year for some). This time, I focused on drivers using .set_mms and .set_mmss64, allowing me to remove those callbacks. About a third of the patches got reviews, I actually own the RTCs and I tested another third and the remaining one are unlikely to cause any issues. Other than that, a single new driver and the usual fixes here and there. Summary: Subsystem: - set_mmss and set_mmss64 rtc_ops removal - Fix timestamp value for RTC_TIMESTAMP_BEGIN_1900 - Use SPDX identifier for the core - validate upper bound of tm->tm_year New driver: - Aspeed BMC SoC RTC Drivers: - abx80x: use rtc_add_group - ds3232: nvram support - pcf85063: add alarm, nvram, offset correction and microcrystal rv8263 support - x1205: add of_match_table - Use set_time instead of set_mms/set_mmss64 for: ab3100, coh901331, digicolor, ds1672, ds2404, ep93xx, imxdi, jz4740, lpc32xx, mc13xxx, mxc, pcap, stmp3xxx, test, wm831x, xgene. - Set RTC range for: ab3100, at91sam9, coh901331, da9063, digicolor, dm355evm, ds1672, ds2404, ep39xx, goldfish, imxdi, jz4740, lpc32xx, mc13xxx, mv, mxc, omap, pcap, pcf85063, pcf85363, ps3, sh, stmp3xxx, sun4v, tegra, wm831x, xgene. - Switch to rtc_time64_to_tm/rtc_tm_to_time64 for the driver that properly set the RTC range. - Use dev_get_drvdata instead of multiple indirections" * tag 'rtc-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (177 commits) rtc: snvs: Use __maybe_unused instead of #if CONFIG_PM_SLEEP rtc: imxdi: remove unused variable rtc: drop set_mms and set_mmss64 rtc: pcap: convert to SPDX identifier rtc: pcap: use .set_time rtc: pcap: switch to rtc_time64_to_tm/rtc_tm_to_time64 rtc: pcap: set range rtc: digicolor: convert to SPDX identifier rtc: digicolor: use .set_time rtc: digicolor: set range rtc: digicolor: fix possible race condition rtc: jz4740: convert to SPDX identifier rtc: jz4740: rework invalid time detection rtc: jz4740: use dev_pm_set_wake_irq() to simplify code rtc: jz4740: use .set_time rtc: jz4740: remove useless check rtc: jz4740: switch to rtc_time64_to_tm/rtc_tm_to_time64 rtc: jz4740: set range rtc: 88pm860x: prevent use-after-free on device remove rtc: Use dev_get_drvdata() ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linuxLinus Torvalds authored
Pull i2c updates from Wolfram Sang: - API for late atomic transfers (e.g. to shut down via PMIC). We have a seperate callback now which is called under clearly defined conditions. In-kernel users are converted, too. - new driver for the AMD PCIe MP2 I2C controller - large refactoring for at91 and bcm-iproc (both gain slave support due to this) - and a good share of various driver improvements anf fixes * 'i2c/for-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (57 commits) dt-bindings: i2c: riic: document r7s9210 support i2c: imx-lpi2c: Use __maybe_unused instead of #if CONFIG_PM_SLEEP i2c-piix4: Add Hygon Dhyana SMBus support i2c: core: apply 'is_suspended' check for SMBus, too i2c: core: ratelimit 'transfer when suspended' errors i2c: iproc: Change driver to use 'BIT' macro i2c: riic: Add Runtime PM support i2c: mux: demux-pinctrl: use struct_size() in devm_kzalloc() i2c: mux: pca954x: allow management of device idle state via sysfs i2c: mux: pca9541: remove support for unused platform data i2c: mux: pca954x: remove support for unused platform data dt-bindings: i2c: i2c-mtk: add support for MT8516 i2c: axxia: use auto cmd for last message i2c: gpio: flag atomic capability if possible i2c: algo: bit: add flag to whitelist atomic transfers i2c: stu300: use xfer_atomic callback to bail out early i2c: ocores: enable atomic xfers i2c: ocores: refactor setup for polling i2c: tegra-bpmp: convert to use new atomic callbacks i2c: omap: Add the master_xfer_atomic hook ...
-
git://git.linux-nfs.org/projects/anna/linux-nfsLinus Torvalds authored
Pull NFS client updates from Anna Schumaker: "Highlights include: Stable bugfixes: - Fall back to MDS if no deviceid is found rather than aborting # v4.11+ - NFS4: Fix v4.0 client state corruption when mount Features: - Much improved handling of soft mounts with NFS v4.0: - Reduce risk of false positive timeouts - Faster failover of reads and writes after a timeout - Added a "softerr" mount option to return ETIMEDOUT instead of EIO to the application after a timeout - Increase number of xprtrdma backchannel requests - Add additional xprtrdma tracepoints - Improved send completion batching for xprtrdma Other bugfixes and cleanups: - Return -EINVAL when NFS v4.2 is passed an invalid dedup mode - Reduce usage of GFP_ATOMIC pages in SUNRPC - Various minor NFS over RDMA cleanups and bugfixes - Use the correct container namespace for upcalls - Don't share superblocks between user namespaces - Various other container fixes - Make nfs_match_client() killable to prevent soft lockups - Don't mark all open state for recovery when handling recallable state revoked flag" * tag 'nfs-for-5.2-1' of git://git.linux-nfs.org/projects/anna/linux-nfs: (69 commits) SUNRPC: Rebalance a kref in auth_gss.c NFS: Fix a double unlock from nfs_match,get_client nfs: pass the correct prototype to read_cache_page NFSv4: don't mark all open state for recovery when handling recallable state revoked flag SUNRPC: Fix an error code in gss_alloc_msg() SUNRPC: task should be exit if encode return EKEYEXPIRED more times NFS4: Fix v4.0 client state corruption when mount PNFS fallback to MDS if no deviceid found NFS: make nfs_match_client killable lockd: Store the lockd client credential in struct nlm_host NFS: When mounting, don't share filesystems between different user namespaces NFS: Convert NFSv2 to use the container user namespace NFSv4: Convert the NFS client idmapper to use the container user namespace NFS: Convert NFSv3 to use the container user namespace SUNRPC: Use namespace of listening daemon in the client AUTH_GSS upcall SUNRPC: Use the client user namespace when encoding creds NFS: Store the credential of the mount process in the nfs_server SUNRPC: Cache cred of process creating the rpc_client xprtrdma: Remove stale comment xprtrdma: Update comments that reference ib_drain_qp ...
-
Mike Rapoport authored
The reduce_memory() function clampls the available memory to a limit defined by the "mem=" command line parameter. It takes into account the amount of already reserved memory and excludes it from the limit calculations. Rather than traverse memblocks and remove them by hand, use memblock_reserved_size() to account the reserved memory and memblock_enforce_memory_limit() to clamp the available memory. Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Gustavo A. R. Silva authored
One of the more common cases of allocation size calculations is finding the size of a structure that has a zero-sized array at the end, along with memory for some number of elements for that array. For example: struct foo { int stuff; void *entry[]; }; instance = kzalloc(sizeof(struct foo) + sizeof(void *) * count, GFP_KERNEL); Instead of leaving these open-coded and prone to type mistakes, we can now use the new struct_size() helper: instance = kzalloc(struct_size(instance, entry, count), GFP_KERNEL); This code was detected with the help of Coccinelle. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroupLinus Torvalds authored
Pull cgroup updates from Tejun Heo: "This includes Roman's cgroup2 freezer implementation. It's a separate machanism from cgroup1 freezer. Instead of blocking user tasks in arbitrary uninterruptible sleeps, the new implementation extends jobctl stop - frozen tasks are trapped in jobctl stop until thawed and can be killed and ptraced. Lots of thanks to Oleg for sheperding the effort. Other than that, there are a few trivial changes" * 'for-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: cgroup: never call do_group_exit() with task->frozen bit set kernel: cgroup: fix misuse of %x cgroup: get rid of cgroup_freezer_frozen_exit() cgroup: prevent spurious transition into non-frozen state cgroup: Remove unused cgrp variable cgroup: document cgroup v2 freezer interface cgroup: add tracing points for cgroup v2 freezer cgroup: make TRACE_CGROUP_PATH irq-safe kselftests: cgroup: add freezer controller self-tests kselftests: cgroup: don't fail on cg_kill_all() error in cg_destroy() cgroup: cgroup v2 freezer cgroup: protect cgroup->nr_(dying_)descendants by css_set_lock cgroup: implement __cgroup_task_count() helper cgroup: rename freezer.c into legacy_freezer.c cgroup: remove extra cgroup_migrate_finish() call
-
git://git.kernel.org/pub/scm/linux/kernel/git/tj/wqLinus Torvalds authored
Pull workqueue updates from Tejun Heo: "Only three commits, of which two are trivial. The non-trivial chagne is Thomas's patch to switch workqueue from sched RCU to regular one. The use of sched RCU is mostly historic and doesn't really buy us anything noticeable" * 'for-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: workqueue: Use normal rcu kernel/workqueue: Document wq_worker_last_func() argument kernel/workqueue: Use __printf markup to silence compiler in function 'alloc_workqueue'
-
YueHaibing authored
kernel BUG at lib/list_debug.c:47! invalid opcode: 0000 [#1 CPU: 0 PID: 12914 Comm: rmmod Tainted: G W 5.1.0+ #47 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.3-0-ge2fc41e-prebuilt.qemu-project.org 04/01/2014 RIP: 0010:__list_del_entry_valid+0x53/0x90 Code: 48 8b 32 48 39 fe 75 35 48 8b 50 08 48 39 f2 75 40 b8 01 00 00 00 5d c3 48 89 fe 48 89 c2 48 c7 c7 18 75 fe 82 e8 cb 34 78 ff <0f> 0b 48 89 fe 48 c7 c7 50 75 fe 82 e8 ba 34 78 ff 0f 0b 48 89 f2 RSP: 0018:ffffc90001c2fe40 EFLAGS: 00010286 RAX: 000000000000004e RBX: ffffffffa0184000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffff888237a17788 RDI: 00000000ffffffff RBP: ffffc90001c2fe40 R08: 0000000000000000 R09: 0000000000000000 R10: ffffc90001c2fe10 R11: 0000000000000000 R12: 0000000000000000 R13: ffffc90001c2fe50 R14: ffffffffa0184000 R15: 0000000000000000 FS: 00007f3d83634540(0000) GS:ffff888237a00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000555c350ea818 CR3: 0000000231677000 CR4: 00000000000006f0 Call Trace: unregister_pernet_operations+0x34/0x120 unregister_pernet_subsys+0x1c/0x30 packet_exit+0x1c/0x369 [af_packet __x64_sys_delete_module+0x156/0x260 ? lockdep_hardirqs_on+0x133/0x1b0 ? do_syscall_64+0x12/0x1f0 do_syscall_64+0x6e/0x1f0 entry_SYSCALL_64_after_hwframe+0x49/0xbe When modprobe af_packet, register_pernet_subsys fails and does a cleanup, ops->list is set to LIST_POISON1, but the module init is considered to success, then while rmmod it, BUG() is triggered in __list_del_entry_valid which is called from unregister_pernet_subsys. This patch fix error handing path in packet_init to avoid possilbe issue if some error occur. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://github.com/c-sky/csky-linuxLinus Torvalds authored
Pull arch/csky perf update from Guo Ren: "Add support for perf unwind-libdw" * tag 'csky-for-linus-5.2-perf-unwind-libdw' of git://github.com/c-sky/csky-linux: csky: Add support for perf unwind-libdw
-
Chuck Lever authored
Restore the kref_get that matches the gss_put_auth(gss_msg->auth) done by gss_release_msg(). Fixes: ac83228a ("SUNRPC: Use namespace of listening daemon ...") Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
-