- 23 Jan, 2013 2 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pciLinus Torvalds authored
Pull PCI updates from Bjorn Helgaas: "The most important is a fix for a pciehp deadlock that occurs when unplugging a Thunderbolt adapter. We also applied the same fix to shpchp, removed CONFIG_EXPERIMENTAL dependencies, fixed a pcie_aspm=force problem, and fixed a refcount leak. Details: - Hotplug PCI: pciehp: Use per-slot workqueues to avoid deadlock PCI: shpchp: Make shpchp_wq non-ordered PCI: shpchp: Handle push button event asynchronously PCI: shpchp: Use per-slot workqueues to avoid deadlock - Power management PCI: Allow pcie_aspm=force even when FADT indicates it is unsupported - Misc PCI/AER: pci_get_domain_bus_and_slot() call missing required pci_dev_put() PCI: remove depends on CONFIG_EXPERIMENTAL" * tag '3.8-pci-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: PCI: remove depends on CONFIG_EXPERIMENTAL PCI: Allow pcie_aspm=force even when FADT indicates it is unsupported PCI: shpchp: Use per-slot workqueues to avoid deadlock PCI: shpchp: Handle push button event asynchronously PCI: shpchp: Make shpchp_wq non-ordered PCI/AER: pci_get_domain_bus_and_slot() call missing required pci_dev_put() PCI: pciehp: Use per-slot workqueues to avoid deadlock
-
Tejun Heo authored
Commit 083b804c ("async: use workqueue for worker pool") made it possible that async jobs are moved from pending to running out-of-order. While pending async jobs will be queued and dispatched for execution in the same order, nothing guarantees they'll enter "1) move self to the running queue" of async_run_entry_fn() in the same order. Before the conversion, async implemented its own worker pool. An async worker, upon being woken up, fetches the first item from the pending list, which kept the executing lists sorted. The conversion to workqueue was done by adding work_struct to each async_entry and async just schedules the work item. The queueing and dispatching of such work items are still in order but now each worker thread is associated with a specific async_entry and moves that specific async_entry to the executing list. So, depending on which worker reaches that point earlier, which is non-deterministic, we may end up moving an async_entry with larger cookie before one with smaller one. This broke __lowest_in_progress(). running->domain may not be properly sorted and is not guaranteed to contain lower cookies than pending list when not empty. Fix it by ensuring sort-inserting to the running list and always looking at both pending and running when trying to determine the lowest cookie. Over time, the async synchronization implementation became quite messy. We better restructure it such that each async_entry is linked to two lists - one global and one per domain - and not move it when execution starts. There's no reason to distinguish pending and running. They behave the same for synchronization purposes. Signed-off-by:
Tejun Heo <tj@kernel.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: stable@vger.kernel.org Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
- 22 Jan, 2013 18 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linuxLinus Torvalds authored
Pull perf/urgent fixes from Arnaldo Carvalho de Melo: . revert 20b279 - require exclude_guest to use PEBS - kernel side, now older binaries will continue working for things like cycles:pp without needing to pass extra modifiers, from David Ahern. . Fix building from 'make perf-*-src-pkg' tarballs, broken by UAPI, from Sebastian Andrzej Siewior [ Pulling directly, Ingo would normally pull but has been unresponsive ] * tag 'perf-urgent-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: perf tools: Fix building from 'make perf-*-src-pkg' tarballs perf x86: revert 20b279 - require exclude_guest to use PEBS - kernel side
-
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linuxLinus Torvalds authored
Pull parisc fixes from Helge Deller: "Improve the stability of the linux kernel on the parisc architecture" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: sigaltstack doesn't round ss.ss_sp as required parisc: improve ptrace support for gdb single-step parisc: don't claim cpu irqs more than once parisc: avoid undefined shift in cnv_float.h
-
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuseLinus Torvalds authored
Pull fuse fixes from Miklos Szeredi: "This contain a bugfix for CUSE and miscellaneous small fixes" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse: fuse: remove unused variable in fuse_try_move_page() fuse: make fuse_file_fallocate() static fuse: Move CUSE Kconfig entry from fs/Kconfig into fs/fuse/Kconfig cuse: fix uninitialized variable warnings cuse: do not register multiple devices with identical names cuse: use mutex as registration lock instead of spinlocks
-
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpioLinus Torvalds authored
Pull GPIO fixes from Linus Walleij: "Here are some GPIO fixes I stacked up in my GPIO tree: - Remove a bad #include from the Samsung driver - Some Kconfig hazzle for the Samsungs - Skip gpiolib registration on EXYNOS5440 - Don't free the MVEBU label" * tag 'fixes-for-v3.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: gpio: mvebu: Don't free chip label memory gpio: samsung: skip gpio lib registration for EXYNOS5440 gpio: samsung: silent build warning for EXYNOS5 SoCs gpio: samsung: fix pinctrl condition for exynos and exynos5440 gpio: samsung: remove inclusion <mach/regs-clock.h>
-
git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fsLinus Torvalds authored
Pull f2fs fixes from Jaegeuk Kim: o Support swap file and link generic_file_remap_pages o Enhance the bio streaming flow and free section control o Major bug fix on recovery routine o Minor bug/warning fixes and code cleanups * tag 'f2fs-for-3.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (22 commits) f2fs: use _safe() version of list_for_each f2fs: add comments of start_bidx_of_node f2fs: avoid issuing small bios due to several dirty node pages f2fs: support swapfile f2fs: add remap_pages as generic_file_remap_pages f2fs: add __init to functions in init_f2fs_fs f2fs: fix the debugfs entry creation path f2fs: add global mutex_lock to protect f2fs_stat_list f2fs: remove the blk_plug usage in f2fs_write_data_pages f2fs: avoid redundant time update for parent directory in f2fs_delete_entry f2fs: remove redundant call to set_blocksize in f2fs_fill_super f2fs: move f2fs_balance_fs to punch_hole f2fs: add f2fs_balance_fs in several interfaces f2fs: revisit the f2fs_gc flow f2fs: check return value during recovery f2fs: avoid null dereference in f2fs_acl_from_disk f2fs: initialize newly allocated dnode structure f2fs: update f2fs partition info about SIT/NAT layout f2fs: update f2fs document to reflect SIT/NAT layout correctly f2fs: remove unneeded INIT_LIST_HEAD at few places ...
-
git://github.com/awilliam/linux-vfioLinus Torvalds authored
Pull vfio fix from Alex Williamson. "vfio-pci: Fix buffer overfill" * tag 'vfio-for-v3.8-rc5' of git://github.com/awilliam/linux-vfio: vfio-pci: Fix buffer overfill
-
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-traceLinus Torvalds authored
Pull ftrace fix from Steven Rostedt: "Kprobes now uses the function tracer if it can. That is, if a probe is placed on a function mcount/nop location, and the arch supports it, instead of adding a breakpoint, kprobes will register a function callback as that is much more efficient. The function tracer requires to update modules before they run, and uses the module notifier to do so. But if something else in the module notifiers registers a kprobe at one of these locations, before ftrace can get to it, then the system could fail. The function tracer must be initialized early, otherwise module notifiers that probe will only work by chance." * tag 'trace-3.8-rc4-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: ftrace: Be first to run code modification on modules
-
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-devLinus Torvalds authored
Pull libata fixes from Jeff Garzik: 1) ahci: Fix typo that caused erronenous error handling. Thought: I wonder if sparse could have caught this, somehow. 2) ahci: support a slightly odd Enmotus variant 3) core: fix a drive detection problem by correcting the logic by which the DevSlp timing variables are obtained and used. * tag 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: [libata] replace sata_settings with devslp_timing [libata] ahci: Add support for Enmotus Bobcat device. [libata] ahci: Fix lack of command retry after a success error handler.
-
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-securityLinus Torvalds authored
Pull security subsystem bugfixes from James Morris. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: security/device_cgroup: lock assert fails in dev_exception_clean() evm: checking if removexattr is not a NULL
-
Oleg Nesterov authored
wake_up_process() should never wakeup a TASK_STOPPED/TRACED task. Change it to use TASK_NORMAL and add the WARN_ON(). TASK_ALL has no other users, probably can be killed. Signed-off-by:
Oleg Nesterov <oleg@redhat.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Oleg Nesterov authored
putreg() assumes that the tracee is not running and pt_regs_access() can safely play with its stack. However a killed tracee can return from ptrace_stop() to the low-level asm code and do RESTORE_REST, this means that debugger can actually read/modify the kernel stack until the tracee does SAVE_REST again. set_task_blockstep() can race with SIGKILL too and in some sense this race is even worse, the very fact the tracee can be woken up breaks the logic. As Linus suggested we can clear TASK_WAKEKILL around the arch_ptrace() call, this ensures that nobody can ever wakeup the tracee while the debugger looks at it. Not only this fixes the mentioned problems, we can do some cleanups/simplifications in arch_ptrace() paths. Probably ptrace_unfreeze_traced() needs more callers, for example it makes sense to make the tracee killable for oom-killer before access_process_vm(). While at it, add the comment into may_ptrace_stop() to explain why ptrace_stop() still can't rely on SIGKILL and signal_pending_state(). Reported-by:
Salman Qazi <sqazi@google.com> Reported-by:
Suleiman Souhlal <suleiman@google.com> Suggested-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
Oleg Nesterov <oleg@redhat.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Oleg Nesterov authored
Cleanup and preparation for the next change. signal_wake_up(resume => true) is overused. None of ptrace/jctl callers actually want to wakeup a TASK_WAKEKILL task, but they can't specify the necessary mask. Turn signal_wake_up() into signal_wake_up_state(state), reintroduce signal_wake_up() as a trivial helper, and add ptrace_signal_wake_up() which adds __TASK_TRACED. This way ptrace_signal_wake_up() can work "inside" ptrace_request() even if the tracee doesn't have the TASK_WAKEKILL bit set. Signed-off-by:
Oleg Nesterov <oleg@redhat.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Dan Carpenter authored
This is calling list_del() inside a loop which is a problem when we try move to the next item on the list. I've converted it to use the _safe version. And also, as a cleanup, I've converted it to use list_for_each_entry instead of list_for_each. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
Jaegeuk Kim <jaegeuk.kim@samsung.com>
-
Jaegeuk Kim authored
The caller of start_bidx_of_node() should give proper node offsets which point only direct node blocks. Otherwise, it is a caller's bug. This patch adds comments to make it clear. Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Jaegeuk Kim <jaegeuk.kim@samsung.com>
-
Jaegeuk Kim authored
If some small bios of dirty node pages are supposed to be issued during the sequential data writes, there-in well-produced consecutive data bios are able to be split by the small node bios, resulting in performance degradation. So, let's collect a number of dirty node pages until reaching a threshold. And, by default, I set the threshold as 2MB, a segment size. This improves sequential write performance on i5, 512GB SSD (830 w/ SATA2) as follows. Before: 231 MB/s -> After: 255 MB/s Signed-off-by:
Jaegeuk Kim <jaegeuk.kim@samsung.com> Reviewed-by:
Namjae Jeon <namjae.jeon@samsung.com>
-
Jaegeuk Kim authored
This patch adds f2fs_bmap operation to the data address space. This enables f2fs to support swapfile. Signed-off-by:
Jaegeuk Kim <jaegeuk.kim@samsung.com>
-
Jaegeuk Kim authored
This was added for all the file systems before. See the following commit. commit id: 0b173bc4 [PATCH] mm: kill vma flag VM_CAN_NONLINEAR This patch moves actual ptes filling for non-linear file mappings into special vma operation: ->remap_pages(). File system must implement this method to get non-linear mappings support, if it uses filemap_fault() then generic_file_remap_pages() can be used. Now device drivers can implement this method and obtain nonlinear vma support." Signed-off-by:
Jaegeuk Kim <jaegeuk.kim@samsung.com>
-
Namjae Jeon authored
Add __init to functions in init_f2fs_fs for code consistency. Signed-off-by:
Namjae Jeon <namjae.jeon@samsung.com> Signed-off-by:
Amit Sahrawat <a.sahrawat@samsung.com> Signed-off-by:
Jaegeuk Kim <jaegeuk.kim@samsung.com>
-
- 21 Jan, 2013 10 commits
-
-
Steven Rostedt authored
If some other kernel subsystem has a module notifier, and adds a kprobe to a ftrace mcount point (now that kprobes work on ftrace points), when the ftrace notifier runs it will fail and disable ftrace, as well as kprobes that are attached to ftrace points. Here's the error: WARNING: at kernel/trace/ftrace.c:1618 ftrace_bug+0x239/0x280() Hardware name: Bochs Modules linked in: fat(+) stap_56d28a51b3fe546293ca0700b10bcb29__8059(F) nfsv4 auth_rpcgss nfs dns_resolver fscache xt_nat iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack lockd sunrpc ppdev parport_pc parport microcode virtio_net i2c_piix4 drm_kms_helper ttm drm i2c_core [last unloaded: bid_shared] Pid: 8068, comm: modprobe Tainted: GF 3.7.0-0.rc8.git0.1.fc19.x86_64 #1 Call Trace: [<ffffffff8105e70f>] warn_slowpath_common+0x7f/0xc0 [<ffffffff81134106>] ? __probe_kernel_read+0x46/0x70 [<ffffffffa0180000>] ? 0xffffffffa017ffff [<ffffffffa0180000>] ? 0xffffffffa017ffff [<ffffffff8105e76a>] warn_slowpath_null+0x1a/0x20 [<ffffffff810fd189>] ftrace_bug+0x239/0x280 [<ffffffff810fd626>] ftrace_process_locs+0x376/0x520 [<ffffffff810fefb7>] ftrace_module_notify+0x47/0x50 [<ffffffff8163912d>] notifier_call_chain+0x4d/0x70 [<ffffffff810882f8>] __blocking_notifier_call_chain+0x58/0x80 [<ffffffff81088336>] blocking_notifier_call_chain+0x16/0x20 [<ffffffff810c2a23>] sys_init_module+0x73/0x220 [<ffffffff8163d719>] system_call_fastpath+0x16/0x1b ---[ end trace 9ef46351e53bbf80 ]--- ftrace failed to modify [<ffffffffa0180000>] init_once+0x0/0x20 [fat] actual: cc:bb:d2:4b:e1 A kprobe was added to the init_once() function in the fat module on load. But this happened before ftrace could have touched the code. As ftrace didn't run yet, the kprobe system had no idea it was a ftrace point and simply added a breakpoint to the code (0xcc in the cc:bb:d2:4b:e1). Then when ftrace went to modify the location from a call to mcount/fentry into a nop, it didn't see a call op, but instead it saw the breakpoint op and not knowing what to do with it, ftrace shut itself down. The solution is to simply give the ftrace module notifier the max priority. This should have been done regardless, as the core code ftrace modification also happens very early on in boot up. This makes the module modification closer to core modification. Link: http://lkml.kernel.org/r/20130107140333.593683061@goodmis.org Cc: stable@vger.kernel.org Acked-by:
Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Reported-by:
Frank Ch. Eigler <fche@redhat.com> Signed-off-by:
Steven Rostedt <rostedt@goodmis.org>
-
Jerry Snitselaar authored
devcgroup_css_free() calls dev_exception_clean() without the devcgroup_mutex being locked. Shutting down a kvm virt was giving me the following trace: [36280.732764] ------------[ cut here ]------------ [36280.732778] WARNING: at /home/snits/dev/linux/security/device_cgroup.c:172 dev_exception_clean+0xa9/0xc0() [36280.732782] Hardware name: Studio XPS 8100 [36280.732785] Modules linked in: xt_REDIRECT fuse ebtable_nat ebtables ipt_MASQUERADE iptable_nat nf_nat_ipv4 nf_nat xt_CHECKSUM iptable_mangle bridge stp llc nf_conntrack_ipv4 ip6t_REJECT nf_conntrack_ipv6 nf_defrag_ipv6 nf_defrag_ipv4 ip6table_filter it87 hwmon_vid xt_state nf_conntrack ip6_tables snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_intel snd_hda_codec snd_hwdep snd_seq coretemp snd_seq_device crc32c_intel snd_pcm snd_page_alloc snd_timer snd broadcom tg3 serio_raw i7core_edac edac_core ptp pps_core lpc_ich pcspkr mfd_core soundcore microcode i2c_i801 nfsd auth_rpcgss nfs_acl lockd vhost_net sunrpc tun macvtap macvlan kvm_intel kvm uinput binfmt_misc autofs4 usb_storage firewire_ohci firewire_core crc_itu_t radeon drm_kms_helper ttm [36280.732921] Pid: 933, comm: libvirtd Tainted: G W 3.8.0-rc3-00307-g4c217de #1 [36280.732922] Call Trace: [36280.732927] [<ffffffff81044303>] warn_slowpath_common+0x93/0xc0 [36280.732930] [<ffffffff8104434a>] warn_slowpath_null+0x1a/0x20 [36280.732932] [<ffffffff812deaf9>] dev_exception_clean+0xa9/0xc0 [36280.732934] [<ffffffff812deb2a>] devcgroup_css_free+0x1a/0x30 [36280.732938] [<ffffffff810ccd76>] cgroup_diput+0x76/0x210 [36280.732941] [<ffffffff8119eac0>] d_delete+0x120/0x180 [36280.732943] [<ffffffff81195cff>] vfs_rmdir+0xef/0x130 [36280.732945] [<ffffffff81195e47>] do_rmdir+0x107/0x1c0 [36280.732949] [<ffffffff8132d17e>] ? trace_hardirqs_on_thunk+0x3a/0x3f [36280.732951] [<ffffffff81198646>] sys_rmdir+0x16/0x20 [36280.732954] [<ffffffff8173bd82>] system_call_fastpath+0x16/0x1b [36280.732956] ---[ end trace ca39dced899a7d9f ]--- Signed-off-by:
Jerry Snitselaar <jerry.snitselaar@oracle.com> Cc: stable@kernel.org Signed-off-by:
James Morris <james.l.morris@oracle.com>
-
Dmitry Kasatkin authored
The following lines of code produce a kernel oops. fd = socket(PF_FILE, SOCK_STREAM|SOCK_CLOEXEC|SOCK_NONBLOCK, 0); fchmod(fd, 0666); [ 139.922364] BUG: unable to handle kernel NULL pointer dereference at (null) [ 139.924982] IP: [< (null)>] (null) [ 139.924982] *pde = 00000000 [ 139.924982] Oops: 0000 [#5] SMP [ 139.924982] Modules linked in: fuse dm_crypt dm_mod i2c_piix4 serio_raw evdev binfmt_misc button [ 139.924982] Pid: 3070, comm: acpid Tainted: G D 3.8.0-rc2-kds+ #465 Bochs Bochs [ 139.924982] EIP: 0060:[<00000000>] EFLAGS: 00010246 CPU: 0 [ 139.924982] EIP is at 0x0 [ 139.924982] EAX: cf5ef000 EBX: cf5ef000 ECX: c143d600 EDX: c15225f2 [ 139.924982] ESI: cf4d2a1c EDI: cf4d2a1c EBP: cc02df10 ESP: cc02dee4 [ 139.924982] DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 [ 139.924982] CR0: 80050033 CR2: 00000000 CR3: 0c059000 CR4: 000006d0 [ 139.924982] DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000 [ 139.924982] DR6: ffff0ff0 DR7: 00000400 [ 139.924982] Process acpid (pid: 3070, ti=cc02c000 task=d7705340 task.ti=cc02c000) [ 139.924982] Stack: [ 139.924982] c1203c88 00000000 cc02def4 cf4d2a1c ae21eefa 471b60d5 1083c1ba c26a5940 [ 139.924982] e891fb5e 00000041 00000004 cc02df1c c1203964 00000000 cc02df4c c10e20c3 [ 139.924982] 00000002 00000000 00000000 22222222 c1ff2222 cf5ef000 00000000 d76efb08 [ 139.924982] Call Trace: [ 139.924982] [<c1203c88>] ? evm_update_evmxattr+0x5b/0x62 [ 139.924982] [<c1203964>] evm_inode_post_setattr+0x22/0x26 [ 139.924982] [<c10e20c3>] notify_change+0x25f/0x281 [ 139.924982] [<c10cbf56>] chmod_common+0x59/0x76 [ 139.924982] [<c10e27a1>] ? put_unused_fd+0x33/0x33 [ 139.924982] [<c10cca09>] sys_fchmod+0x39/0x5c [ 139.924982] [<c13f4f30>] syscall_call+0x7/0xb [ 139.924982] Code: Bad EIP value. This happens because sockets do not define the removexattr operation. Before removing the xattr, verify the removexattr function pointer is not NULL. Signed-off-by:
Dmitry Kasatkin <dmitry.kasatkin@intel.com> Signed-off-by:
Mimi Zohar <zohar@linux.vnet.ibm.com> Cc: stable@vger.kernel.org Signed-off-by:
James Morris <james.l.morris@oracle.com>
-
git://people.freedesktop.org/~airlied/linuxLinus Torvalds authored
Pull drm fixes from Dave Airlie: "A bunch of intel and radeon fixes, along with two fixes to TTM code. The correct fix for the Intel ironlake failure is in this, and should make things more stable, along with some misc radeon fixes." * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: ttm: on move memory failure don't leave a node dangling ttm: don't destroy old mm_node on memcpy failure Revert "drm/radeon: do not move bo to different placement at each cs" drm/i915: fix FORCEWAKE posting reads drm/i915: Invalidate the relocation presumed_offsets along the slow path drm/i915/eDP: do not write power sequence registers for ghost eDP drm/radeon: improve semaphore debugging on lockup drm/radeon: allow FP16 color clear registers on r500 drm/radeon: clear reset flags if engines are idle drm/i915: Record DERRMR, FORCEWAKE and RING_CTL in error-state
-
Linus Torvalds authored
Commit 1fb9341a ("module: put modules in list much earlier") moved some of the module initialization code around, and in the process changed the exit paths too. But for the duplicate export symbol error case the change made the ddebug_cleanup path jump to after the module mutex unlock, even though it happens with the mutex held. Rusty has some patches to split this function up into some helper functions, hopefully the mess of complex goto targets will go away eventually. Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Dave Airlie authored
if we have a move notify callback, when moving fails, we call move notify the opposite way around, however this ends up with *mem containing the mm_node from the bo, which means we double free it. This is a follow on to the previous fix. Reviewed-by:
Jerome Glisse <jglisse@redhat.com> Signed-off-by:
Dave Airlie <airlied@redhat.com>
-
Dave Airlie authored
When we are using memcpy to move objects around, and we fail to memcpy due to lack of memory to populate or failure to finish the copy, we don't want to destroy the mm_node that has been copied into old_copy. While working on a new kms driver that uses memcpy, if I overallocated bo's up to the memory limits, and eviction failed, then machine would oops soon after due to having an active bo with an already freed drm_mm embedded in it, freeing it a second time didn't end well. Reviewed-by:
Jerome Glisse <jglisse@redhat.com> Signed-off-by:
Dave Airlie <airlied@redhat.com>
-
git://people.freedesktop.org/~danvet/drm-intelDave Airlie authored
More important fixes for 3.9: - error_state improvements to help debug the new scanline wait code added for gen6+ - bug reports started popping up :( patch from Chris Wilson. - fix a panel power sequence confusion between the eDP and lvds detection code resulting in black screens - regression introduce in 3.8 (Jani Nikula) - Chris fixed the root-cause of the ilk relocation vs. evict bug. - Another piece of cargo-culted rc6 lore from Jani, fixes up a regression where a system refused to go into rc6 after suspend sometimes. * 'drm-intel-fixes' of git://people.freedesktop.org/~danvet/drm-intel: drm/i915: fix FORCEWAKE posting reads drm/i915: Invalidate the relocation presumed_offsets along the slow path drm/i915/eDP: do not write power sequence registers for ghost eDP drm/i915: Record DERRMR, FORCEWAKE and RING_CTL in error-state
-
git://people.freedesktop.org/~agd5f/linuxDave Airlie authored
A number of fixes, and one revert for a patch having some wierd side effects. * 'drm-fixes-3.8' of git://people.freedesktop.org/~agd5f/linux: Revert "drm/radeon: do not move bo to different placement at each cs" drm/radeon: improve semaphore debugging on lockup drm/radeon: allow FP16 color clear registers on r500 drm/radeon: clear reset flags if engines are idle
-
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linuxLinus Torvalds authored
Pull module fixes and a virtio block fix from Rusty Russell: "Various minor fixes, but a slightly more complex one to fix the per-cpu overload problem introduced recently by kvm id changes." * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: module: put modules in list much earlier. module: add new state MODULE_STATE_UNFORMED. module: prevent warning when finit_module a 0 sized file virtio-blk: Don't free ida when disk is in use
-
- 20 Jan, 2013 3 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/signalLinus Torvalds authored
Pull misc syscall fixes from Al Viro: - compat syscall fixes (discussed back in December) - a couple of "make life easier for sigaltstack stuff by reducing inter-tree dependencies" - fix up compiler/asmlinkage calling convention disagreement of sys_clone() - misc * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/signal: sys_clone() needs asmlinkage_protect make sure that /linuxrc has std{in,out,err} x32: fix sigtimedwait x32: fix waitid() switch compat_sys_wait4() and compat_sys_waitid() to COMPAT_SYSCALL_DEFINE switch compat_sys_sigaltstack() to COMPAT_SYSCALL_DEFINE CONFIG_GENERIC_SIGALTSTACK build breakage with asm-generic/syscalls.h Ensure that kernel_init_freeable() is not inlined into non __init code
-
Oleg Nesterov authored
The ia64 function "thread_matches()" has no users since commit e868a55c ("[IA64] remove find_thread_for_addr()"). Remove it. This allows us to make ptrace_check_attach() static to kernel/ptrace.c, which is good since we'll need to change the semantics of it and fix up all the callers. Signed-off-by:
Oleg Nesterov <oleg@redhat.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Al Viro authored
Cc: stable@vger.kernel.org Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk>
-
- 19 Jan, 2013 1 commit
-
-
Al Viro authored
Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk>
-
- 18 Jan, 2013 6 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usbLinus Torvalds authored
Pull USB fixes from Greg Kroah-Hartman: "Here are 3 USB patches for 3.8-rc4. Two of them are new device id patches, and the third fixes a reported oops in the io_ti USB serial driver" * tag 'usb-3.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: USB: io_ti: Fix NULL dereference in chase_port() USB: option: add TP-LINK HSUPA Modem MA180 USB: option: blacklist network interface on ONDA MT8205 4G LTE
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/ttyLinus Torvalds authored
Pull tty/serial fixes from Greg Kroah-Hartman: "Here are a few tty/serial driver fixes for 3.8-rc4 that resolve a number of problems that people have been having, including the ptys ioctl issue that is a regression fix" * tag 'tty-3.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: 8250/16?50: Add support for Broadcom TruManage redirected serial port pty: return EINVAL for TIOCGPTN for BSD ptys serial:ifx6x60:Keep word size accordance with SPI controller tty: 8250_dw: Fix inverted arguments to serial_out in IRQ handler serial: samsung: remove redundant setting of line config during port reset serial:ifx6x60:Delete SPI timer when shut down port tty/8250: The correct device id for this card is 0x0022 tty/8250: pbn_b0_8_1152000_200 is supposed to be an 8 port definition tty: serial: vt8500: fix return value check in vt8500_serial_probe() serial: mxs-auart: Index is unsigned mxs: uart: fix setting RTS from software
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/stagingLinus Torvalds authored
Pull staging driver bugfixes from Greg Kroah-Hartman: "Here are some bugfixes for the drivers/staging tree for 3.8-rc4. Nothing major, just a number of small fixes for problems that people have reported, including finally tracking down the root of the 64/32 bit problem with the vt6656 that has been driving people crazy for a while" * tag 'staging-3.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: staging/sb105x: PARPORT config is not good enough must use PARPORT_PC staging: wlan-ng: Fix clamping of returned SSID length staging: vt6656: Fix inconsistent structure packing staging:iio:adis16080: Perform sign extension iio: mxs-lradc: indexes are unsigned
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-miscLinus Torvalds authored
Pull char/misc driver fixes from Greg Kroah-Hartman: "Here are two hyperv patches for 3.8-rc4 that fix some reported problems hv_balloon driver" * tag 'char-misc-3.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: Drivers: hv: balloon: Fix a memory leak Drivers: hv: balloon: Fix a bug in the definition of struct dm_info_msg
-
Linus Torvalds authored
Merge tag 'stable/for-linus-3.8-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen Pull Xen fixes from Konrad Rzeszutek Wilk: - CVE-2013-0190/XSA-40 (or stack corruption for 32-bit PV kernels) - Fix racy vma access spotted by Al Viro - Fix mmap batch ioctl potentially resulting in large O(n) page allcations. - Fix vcpu online/offline BUG:scheduling while atomic.. - Fix unbound buffer scanning for more than 32 vCPUs. - Fix grant table being incorrectly initialized - Fix incorrect check in pciback - Allow privcmd in backend domains. Fix up whitespace conflict due to ugly merge resolution in Xen tree in arch/arm/xen/enlighten.c * tag 'stable/for-linus-3.8-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: xen: Fix stack corruption in xen_failsafe_callback for 32bit PVOPS guests. Revert "xen/smp: Fix CPU online/offline bug triggering a BUG: scheduling while atomic." xen/gntdev: remove erronous use of copy_to_user xen/gntdev: correctly unmap unlinked maps in mmu notifier xen/gntdev: fix unsafe vma access xen/privcmd: Fix mmap batch ioctl. Xen: properly bound buffer access when parsing cpu/*/availability xen/grant-table: correctly initialize grant table version 1 x86/xen : Fix the wrong check in pciback xen/privcmd: Relax access control in privcmd_ioctl_mmap
-
git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommuLinus Torvalds authored
Pull m68knommu arch fixes from Greg Ungerer: "This contains a couple of fixes, both affecting compilation of non-mmu m68k targets." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu: m68k: fix conditional use of init_pointer_table m68knommu: add KMAP definitions for non-MMU definitions
-