- 07 Feb, 2019 8 commits
-
-
Eran Ben Elisha authored
Devlink fmsg is a mechanism to pass descriptors between drivers and devlink, in json-like format. The API allows the driver to add nested attributes such as object, object pair and value array, in addition to attributes such as name and value. Driver can use this API to fill the fmsg context in a format which will be translated by the devlink to the netlink message later. There is no memory allocation in advance (other than the initial list head), and it dynamically allocates messages descriptors and add them to the list on the fly. When it needs to send the data using SKBs to the netlink layer, it fragments the data between different SKBs. In order to do this fragmentation, it uses virtual nests attributes, to avoid actual nesting use which cannot be divided between different SKBs. Signed-off-by:
Eran Ben Elisha <eranbe@mellanox.com> Reviewed-by:
Moshe Shemesh <moshe@mellanox.com> Acked-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Moritz Fischer authored
Fix fixed_phy not checking GPIO if no link_update callback is registered. In the original version all users registered a link_update callback so the issue was masked. Fixes: a5597008 ("phy: fixed_phy: Add gpio to determine link up/down.") Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
Moritz Fischer <mdf@kernel.org> Signed-off-by:
-
Christian Lamparter authored
The EMAC driver had a custom IBM_EMAC_RX_SKB_HEADROOM Kconfig option that reserved additional skb headroom for RX. This patch removes the option and migrates the code to use napi_alloc_skb() and netdev_alloc_skb_ip_align() in its place. Signed-off-by:
Christian Lamparter <chunkeey@gmail.com> Signed-off-by:
-
Heiner Kallweit authored
Let's make genphy_c45_read_link behave the same as genphy_update_link and set phydev->link in the function directly. This allows to simplify the callers. In addition don't check further devices once we detect that at least one device reports link as down. v2: - remove an unused variable Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by:
-
Ilias Apalodimas authored
The current driver only enables Pdelay_Req and Pdelay_Resp when HWTSTAMP_FILTER_PTP_V2_EVENT, HWTSTAMP_FILTER_PTP_V1_L4_EVENT or HWTSTAMP_FILTER_PTP_V2_L4_EVENT is requested. This results in ptp sync on slave mode to report 'received SYNC without timestamp' when using ptp4l. Although the hardware can support Sync, Pdelay_Req and Pdelay_resp by setting bit14 annd bits 17/16 to 01 this leaves Delay_Req timestamps out. Fix this by enabling all event and general messages timestamps. This includes SYNC, Follow_Up, Delay_Req, Delay_Resp, Pdelay_Req, Pdelay_Resp and Pdelay_Resp_Follow_Up messages. Signed-off-by:
Ilias Apalodimas <ilias.apalodimas@linaro.org> Acked-by:
Jose Abreu <joabreu@synopsys.com> Tested-by:
Alexandre TORGUE <alexandre.torgue@st.com> Signed-off-by:
-
Miquel Raynal authored
On one hand, the mv88e6xxx driver has a work queue called in loop which will attempt register accesses after MDIO bus suspension, that entirely freezes the platform during suspend. On the other hand, the DSA core is not ready yet to support suspend to RAM operation because so far there is no way to recover reliably the switch configuration. To avoid the kernel to freeze when suspending with a switch driven by the mv88e6xxx driver, we choose to prevent the driver suspension and in the same way, the whole platform. Signed-off-by:
Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by:
Vivien Didelot <vivien.didelot@gmail.com> Signed-off-by:
-
David S. Miller authored
Merge branch 'for_net-next-5.1/rds-tos-v4' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux Santosh Shilimkar says: ==================== rds: add tos support RDS applications make use of tos to classify database traffic. This feature has been used in shipping products from 2.6.32 based kernels. Its tied with RDS v4.1 protocol version and the compatibility gets negotiated as part of connections setup. Patchset keeps full backward compatibility using existing connection negotiation scheme. Currently the feature is exploited by RDMA transport and for TCP transport the user tos values are mapped to same default class (0). For RDMA transports, RDMA CM service type API is used to set up different SL(service lanes) and the IB fabric is configured for tos mapping using Subnet Manager(SL to VL mappings). Similarly for ROCE fabric, user priority is mapped with different DSCP code points which are associated with different switch queues in the fabric. The original code was developed by Bang Nguyen in downstream kernel back in 2.6.32 kernel days and it has evolved significantly over period of time. Thanks to Yanjun for doing testing with various combinations of host like v3.1<->v4.1, v4.1.<->v3.1, v4.1 upstream to shipping v4.1 etc etc ==================== Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller authored
Daniel Borkmann says: ==================== pull-request: bpf-next 2019-02-07 The following pull-request contains BPF updates for your *net-next* tree. The main changes are: 1) Add a riscv64 JIT for BPF, from Björn. 2) Implement BTF deduplication algorithm for libbpf which takes BTF type information containing duplicate per-compilation unit information and reduces it to an equivalent set of BTF types with no duplication and without loss of information, from Andrii. 3) Offloaded and native BPF XDP programs can coexist today, enable also offloaded and generic ones as well, from Jakub. 4) Expose various BTF related helper functions in libbpf as API which are in particular helpful for JITed programs, from Yonghong. 5) Fix the recently added JMP32 code emission in s390x JIT, from Heiko. 6) Fix BPF kselftests' tcp_{server,client}.py to be able to run inside a network namespace, also add a fix for libbpf to get libbpf_print() working, from Stanislav. 7) Fixes for bpftool documentation, from Prashant. 8) Type cleanup in BPF kselftests' test_maps.c to silence a gcc8 warning, from Breno. ==================== Signed-off-by:
-
- 06 Feb, 2019 32 commits
-
-
David S. Miller authored
Ido Schimmel says: ==================== mlxsw: Offload blackhole routes Blackhole routes are routes that cause matching packets to be silently dropped. This is in contrast to unreachable routes that generate an ICMP host unreachable packet in response. The driver currently programs both route types with a trap action and lets the kernel drop matching packets. This is sub-optimal as packets routed using a blackhole route can be directly dropped by the ASIC. Patch #1 alters mlxsw to program blackhole routes with a discard action. Patch #2 adds a matching test. ==================== Signed-off-by: -
Ido Schimmel authored
Use a simple topology consisting of two hosts directly connected to a router. Make sure IPv4/IPv6 ping works and then add blackhole routes. Test that ping fails and that the routes are marked as offloaded. Use a simple tc filter to test that packets were dropped by the ASIC and not trapped to the CPU. Signed-off-by:
Ido Schimmel <idosch@mellanox.com> Signed-off-by:
-
Ido Schimmel authored
Create a new FIB entry type for blackhole routes and set it in case the type of the notified route is 'RTN_BLACKHOLE'. Program such routes with a discard action and mark them as offloaded since the device is dropping the packets instead of the kernel. Signed-off-by:
-
David S. Miller authored
Florian Fainelli says: ==================== net: Introduce ndo_get_port_parent_id() Based on discussion with Ido and feedback from Jakub there are clearly two classes of users that implement SWITCHDEV_ATTR_ID_PORT_PARENT_ID: - PF/VF drivers which typically only implement return the port's parent ID, yet have to implement switchdev_port_attr_get() just for that - Ethernet switch drivers: mlxsw, ocelot, DSA, etc. which implement more attributes which we want to be able to eventually veto in the context of the caller, thus making them candidates for using a blocking notifier chain Changes in v4: - remove superfluous net/switchdev.h inclusions in a few files - added Jiri's Acked-by where given - removed err = -EOPNOTSUPP initializations - changed according to Jiri's suggestion in net/ipv4/ipmr.c Changes in v3: - keep ethsw's switchdev_ops assignment - remove inclusion of net/switchdev.h in netdevsim which is no longer necesary Changes in v2: - resolved build failures spotted by kbuild test robot - added helpers functions into the core network device layer: dev_get_port_parent_id() and netdev_port_same_parent_id(); - added support for recursion to lower devices Changes from RFC: - introduce a ndo_get_port_parent_id() and convert all relevant drivers to use it - get rid of SWITCHDEV_ATTR_ID_PORT_PARENT_ID A subsequent set of patches will convert switchdev_port_attr_set() to use a blocking notifier call, and still get rid of switchdev_port_attr_get() altogether. ==================== Signed-off-by: -
Florian Fainelli authored
Now that we have a dedicated NDO for getting a port's parent ID, get rid of SWITCHDEV_ATTR_ID_PORT_PARENT_ID and convert all callers to use the NDO exclusively. This is a preliminary change to getting rid of switchdev_ops eventually. Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Reviewed-by:
-
Florian Fainelli authored
DSA implements SWITCHDEV_ATTR_ID_PORT_PARENT_ID and we want to get rid of switchdev_ops eventually, ease that migration by implementing a ndo_get_port_parent_id() function which returns what switchdev_port_attr_get() would do. Acked-by:
-
Florian Fainelli authored
ethsw implements SWITCHDEV_ATTR_ID_PORT_PARENT_ID and we want to get rid of switchdev_ops eventually, ease that migration by implementing a ndo_get_port_parent_id() function which returns what switchdev_port_attr_get() would do. Signed-off-by:
-
Florian Fainelli authored
netdevsim only supports SWITCHDEV_ATTR_ID_PORT_PARENT_ID, which makes it a great candidate to be converted to use the ndo_get_port_parent_id() NDO instead of implementing switchdev_port_attr_get(). Acked-by:
-
Florian Fainelli authored
mlxsw implements SWITCHDEV_ATTR_ID_PORT_PARENT_ID and we want to get rid of switchdev_ops eventually, ease that migration by implementing a ndo_get_port_parent_id() function which returns what switchdev_port_attr_get() would do. Acked-by:
-
Florian Fainelli authored
NFP only supports SWITCHDEV_ATTR_ID_PORT_PARENT_ID, which makes it a great candidate to be converted to use the ndo_get_port_parent_id() NDO instead of implementing switchdev_port_attr_get(). Since NFP uses switchdev_port_same_parent_id() convert it to use netdev_port_same_parent_id(). Acked-by:
-
Florian Fainelli authored
Ocelot only supports SWITCHDEV_ATTR_ID_PORT_PARENT_ID as a valid switchdev attribute getter, convert it to use ndo_get_port_parent_id() and get rid of the switchdev_ops::switchdev_port_attr_get altogether. Acked-by:
-
Florian Fainelli authored
mlxsw implements SWITCHDEV_ATTR_ID_PORT_PARENT_ID and we want to get rid of switchdev_ops eventually, ease that migration by implementing a ndo_get_port_parent_id() function which returns what switchdev_port_attr_get() would do. Acked-by:
-
Florian Fainelli authored
mlx5e only supports SWITCHDEV_ATTR_ID_PORT_PARENT_ID, which makes it a great candidate to be converted to use the ndo_get_port_parent_id() NDO instead of implementing switchdev_port_attr_get(). Since mlx5e makes use of switchdev_port_parent_id() convert it to use netdev_port_same_parent_id(). Acked-by:
-
Florian Fainelli authored
Liquidio only supports SWITCHDEV_ATTR_ID_PORT_PARENT_ID, which makes it a great candidate to be converted to use the ndo_get_port_parent_id() NDO instead of implementing switchdev_port_attr_get(). Acked-by:
-
Florian Fainelli authored
BNXT only supports SWITCHDEV_ATTR_ID_PORT_PARENT_ID, which makes it a great candidate to be converted to use the ndo_get_port_parent_id() NDO instead of implementing switchdev_port_attr_get(). The conversion is straight forward here since the PF and VF code use the same getter. Since bnxt makes uses of switchdev_port_same_parent_id() convert it to use netdev_port_same_parent_id(). Acked-by:
-
Florian Fainelli authored
In preparation for getting rid of switchdev_ops, create a dedicated NDO operation for getting the port's parent identifier. There are essentially two classes of drivers that need to implement getting the port's parent ID which are VF/PF drivers with a built-in switch, and pure switchdev drivers such as mlxsw, ocelot, dsa etc. We introduce a helper function: dev_get_port_parent_id() which supports recursion into the lower devices to obtain the first port's parent ID. Convert the bridge, core and ipv4 multicast routing code to check for such ndo_get_port_parent_id() and call the helper function when valid before falling back to switchdev_port_attr_get(). This will allow us to convert all relevant drivers in one go instead of having to implement both switchdev_port_attr_get() and ndo_get_port_parent_id() operations, then get rid of switchdev_port_attr_get(). Acked-by:
-
Vishal Kulkarni authored
Change t4fw_version.h to update latest firmware version number to 1.22.9.0. Signed-off-by:
Vishal Kulkarni <vishal@chelsio.com> Signed-off-by:
-
Vishal Kulkarni authored
Signed-off-by:
-
Thierry Reding authored
Read MAC address 32-bit at a time and manually extract the individual bytes. This avoids pointer aliasing and gives the compiler a better chance of optimizing the operation. Suggested-by:
Thierry Reding <treding@nvidia.com> Reviewed-by:
-
Thierry Reding authored
If the system was booted using a device tree and if the device tree contains a MAC address, use it instead of reading one from the EEPROM. This is useful in situations where the EEPROM isn't properly programmed or where the firmware wants to override the existing MAC address. Signed-off-by:
-
David S. Miller authored
Ido Schimmel says: ==================== mlxsw: core: Trace EMAD errors Nir says: This patchset adds a trace for EMAD errors to the existing EMAD payload traces. This tracepoint is useful to track user or firmware errors during tests execution. Patch #1 defines the devlink tracepoint. Patch #2 uses it for reporting mlxsw EMAD errors. ==================== Signed-off-by: -
Nir Dotan authored
Trace EMAD errors returned from HW. Signed-off-by:
Nir Dotan <nird@mellanox.com> Acked-by:
-
Nir Dotan authored
Define a tracepoint and allow user to trace messages in case of an hardware error code for hardware associated with devlink instance. Signed-off-by:
-
David S. Miller authored
Ioana Ciocoi Radulescu says: ==================== dpaa2-eth: Driver updates First patch moves the driver to a page-per-frame memory model. The others are minor tweaks and optimizations. ==================== Signed-off-by: -
Ioana Ciocoi Radulescu authored
Add more buffers to the Rx buffer pool as soon as 7 of them get consumed, instead of waiting for their number to drop below a fixed threshold. 7 is the number of buffers that can be released in the pool via a single DPIO command. Signed-off-by:
Ioana Radulescu <ruxandra.radulescu@nxp.com> Signed-off-by:
-
Ioana Ciocoi Radulescu authored
Starting with MC10.14.0, dpaa2_io_service_enqueue_fq() API is functional. Since there are a number of cases where it offers better performance compared to the currently used enqueue function, switch to it for firmware versions that support it. Signed-off-by:
-
Ioana Ciocoi Radulescu authored
While in NAPI context, free skbs by calling napi_consume_skb() instead of dev_kfree_skb(), to take advantage of the bulk freeing mechanism. Signed-off-by:
-
Ioana Ciocoi Radulescu authored
Instead of allocating page fragments via the network stack, use the page allocator directly. For now, we consume one page for each Rx buffer. With the new memory model we are free to consider adding more XDP support. Performance decreases slightly in some IP forwarding cases. No visible effect on termination traffic. The driver memory footprint increases as a result of this change, but it is still small enough to not really matter. Another side effect is that now Rx buffer alignment requirements are naturally satisfied without any additional actions needed. Remove alignment related code, except in the buffer layout information conveyed to MC, as hardware still needs to know the alignment value we guarantee. Signed-off-by:
Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by:
-
David S. Miller authored
Pablo Neira Ayuso says: ==================== add flow_rule infrastructure This patchset, as is, allows us to reuse the driver codebase to configure ACL hardware offloads for the ethtool_rxnfc and the TC flower interfaces. A few clients for this infrastructure are presented, such as the bcm_sf2 and the qede drivers, for reference. Moreover all of the existing drivers in the tree are converted to use this infrastructure. This patchset is re-using the existing flow dissector infrastructure that was introduced by Jiri Pirko et al. so the amount of abstractions that this patchset adds are minimal. Well, just a few wrapper structures for the selector side of the rules. And, in order to express actions, this patchset exposes an action API that is based on the existing TC action infrastructure and what existing drivers already support on that front. v7: This patchset is a rebase on top of the net-next tree, after addressing questions and feedback from driver developers in the last batch. ==================== Signed-off-by: -
Pablo Neira Ayuso authored
The qede driver supports for ethtool_rx_flow_spec and flower, both codebases look very similar. This patch uses the ethtool_rx_flow_rule() infrastructure to remove the duplicated ethtool_rx_flow_spec parser and consolidate ACL offload support around the flow_rule infrastructure. Furthermore, more code can be consolidated by merging qede_add_cls_rule() and qede_add_tc_flower_fltr(), these two functions also look very similar. This driver currently provides simple ACL support, such as 5-tuple matching, drop policy and queue to CPU. Drivers that support more features can benefit from this infrastructure to save even more redundant codebase. Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
-
Pablo Neira Ayuso authored
This is a preparation patch to reuse the existing TC flower codebase from ethtool_rx_flow_spec. This patch is merely moving the core ethtool_rx_flow_spec parser after tc flower offload driver code so we can skip a few forward function declarations in the follow up patch. Signed-off-by:
-
Pablo Neira Ayuso authored
Update this driver to use the flow_rule infrastructure, hence we can use the same code to populate hardware IR from ethtool_rx_flow and the cls_flower interfaces. Signed-off-by:
-
